drm/i915: Enable DisplayPort in Valleyview
authorVijay Purushothaman <vijay.a.purushothaman@intel.com>
Thu, 27 Sep 2012 13:43:06 +0000 (19:13 +0530)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Fri, 28 Sep 2012 15:02:08 +0000 (17:02 +0200)
In valleyview voltageswing, pre-emphasis and lane control registers can
be programmed only through the h/w side band fabric.

Cleaned up DPLL calculations for Valleyview to support multi display
configurations.

v2: Based on Daniel's feedbacak, moved crt hotplug detect work around as separate
patch. Also moved i9xx_update_pll_dividers to i8xx_update_pll and
i9xx_update_pll.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: drop spurious whitespace changes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_display.c

index 3f75ee6b5b21a10b2c3a80e6402448423ed0d1b5..0fe4aad8e4245a0e90b7ec676abd529cc65cf760 100644 (file)
 
 #define DPIO_FASTCLK_DISABLE           0x8100
 
-#define _DPIO_DATA_LANE0               0x0220
-#define _DPIO_DATA_LANE1               0x0420
-#define _DPIO_DATA_LANE2               0x2620
-#define _DPIO_DATA_LANE3               0x2820
-#define DPIO_DATA_LANE_A(pipe) _PIPE(pipe, _DPIO_DATA_LANE0, _DPIO_DATA_LANE2)
-#define DPIO_DATA_LANE_B(pipe) _PIPE(pipe, _DPIO_DATA_LANE1, _DPIO_DATA_LANE3)
+#define DPIO_DATA_CHANNEL1             0x8220
+#define DPIO_DATA_CHANNEL2             0x8420
 
 /*
  * Fence registers
index 647898196693648c8c38e2d32998d271124f5990..6458f95263d5b453061d5c7416f7f6050c23dca9 100644 (file)
@@ -4019,7 +4019,7 @@ static void vlv_update_pll(struct drm_crtc *crtc,
                           struct drm_display_mode *mode,
                           struct drm_display_mode *adjusted_mode,
                           intel_clock_t *clock, intel_clock_t *reduced_clock,
-                          int refclk, int num_connectors)
+                          int num_connectors)
 {
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4027,9 +4027,19 @@ static void vlv_update_pll(struct drm_crtc *crtc,
        int pipe = intel_crtc->pipe;
        u32 dpll, mdiv, pdiv;
        u32 bestn, bestm1, bestm2, bestp1, bestp2;
-       bool is_hdmi;
+       bool is_sdvo;
+       u32 temp;
+
+       is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
+               intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
 
-       is_hdmi = intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+       dpll = DPLL_VGA_MODE_DIS;
+       dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
+       dpll |= DPLL_REFA_CLK_ENABLE_VLV;
+       dpll |= DPLL_INTEGRATED_CLOCK_VLV;
+
+       I915_WRITE(DPLL(pipe), dpll);
+       POSTING_READ(DPLL(pipe));
 
        bestn = clock->n;
        bestm1 = clock->m1;
@@ -4037,12 +4047,10 @@ static void vlv_update_pll(struct drm_crtc *crtc,
        bestp1 = clock->p1;
        bestp2 = clock->p2;
 
-       /* Enable DPIO clock input */
-       dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
-               DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
-       I915_WRITE(DPLL(pipe), dpll);
-       POSTING_READ(DPLL(pipe));
-
+       /*
+        * In Valleyview PLL and program lane counter registers are exposed
+        * through DPIO interface
+        */
        mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
        mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
        mdiv |= ((bestn << DPIO_N_SHIFT));
@@ -4053,12 +4061,13 @@ static void vlv_update_pll(struct drm_crtc *crtc,
 
        intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
 
-       pdiv = DPIO_REFSEL_OVERRIDE | (5 << DPIO_PLL_MODESEL_SHIFT) |
+       pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
                (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
-               (8 << DPIO_DRIVER_CTL_SHIFT) | (5 << DPIO_CLK_BIAS_CTL_SHIFT);
+               (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
+               (5 << DPIO_CLK_BIAS_CTL_SHIFT);
        intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
 
-       intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x009f0051);
+       intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
 
        dpll |= DPLL_VCO_ENABLE;
        I915_WRITE(DPLL(pipe), dpll);
@@ -4066,19 +4075,44 @@ static void vlv_update_pll(struct drm_crtc *crtc,
        if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
                DRM_ERROR("DPLL %d failed to lock\n", pipe);
 
-       if (is_hdmi) {
-               u32 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+       intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
+
+       if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+               intel_dp_set_m_n(crtc, mode, adjusted_mode);
+
+       I915_WRITE(DPLL(pipe), dpll);
+
+       /* Wait for the clocks to stabilize. */
+       POSTING_READ(DPLL(pipe));
+       udelay(150);
 
+       temp = 0;
+       if (is_sdvo) {
+               temp = intel_mode_get_pixel_multiplier(adjusted_mode);
                if (temp > 1)
                        temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
                else
                        temp = 0;
-
-               I915_WRITE(DPLL_MD(pipe), temp);
-               POSTING_READ(DPLL_MD(pipe));
        }
+       I915_WRITE(DPLL_MD(pipe), temp);
+       POSTING_READ(DPLL_MD(pipe));
 
-       intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x641); /* ??? */
+       /* Now program lane control registers */
+       if(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)
+                       || intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+       {
+               temp = 0x1000C4;
+               if(pipe == 1)
+                       temp |= (1 << 21);
+               intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
+       }
+       if(intel_pipe_has_type(crtc,INTEL_OUTPUT_EDP))
+       {
+               temp = 0x1000C4;
+               if(pipe == 1)
+                       temp |= (1 << 21);
+               intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
+       }
 }
 
 static void i9xx_update_pll(struct drm_crtc *crtc,
@@ -4094,6 +4128,8 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
        u32 dpll;
        bool is_sdvo;
 
+       i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+
        is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
                intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
 
@@ -4194,7 +4230,7 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 
 static void i8xx_update_pll(struct drm_crtc *crtc,
                            struct drm_display_mode *adjusted_mode,
-                           intel_clock_t *clock,
+                           intel_clock_t *clock, intel_clock_t *reduced_clock,
                            int num_connectors)
 {
        struct drm_device *dev = crtc->dev;
@@ -4203,6 +4239,8 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
        int pipe = intel_crtc->pipe;
        u32 dpll;
 
+       i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+
        dpll = DPLL_VGA_MODE_DIS;
 
        if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -4329,14 +4367,14 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
        if (is_sdvo && is_tv)
                i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
 
-       i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
-                                &reduced_clock : NULL);
-
        if (IS_GEN2(dev))
-               i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
+               i8xx_update_pll(crtc, adjusted_mode, &clock,
+                               has_reduced_clock ? &reduced_clock : NULL,
+                               num_connectors);
        else if (IS_VALLEYVIEW(dev))
-               vlv_update_pll(crtc, mode,adjusted_mode, &clock, NULL,
-                              refclk, num_connectors);
+               vlv_update_pll(crtc, mode, adjusted_mode, &clock,
+                               has_reduced_clock ? &reduced_clock : NULL,
+                               num_connectors);
        else
                i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
                                has_reduced_clock ? &reduced_clock : NULL,