libata-sff: update bmdma host bus error handling

* Clearing IRQ from ata_sff_error_handler() is necessary only when the
  port is gonna be thawed before performing EH actions and some
  controllers don't like being accessed after certain failure modes
  until they're reset.  Clear IRQ iff the port is being thawed.

* When the controller succesfully indicated bus error, the point of
  thawing doesn't matter.  Move thawing inside bmdma part of EH.  This
  is a bit ugly but will ease code reorganization later.

* Remove the unneeded ata_sff_sync().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3cc385dbfe2aefa9e6e112da23295549eb9b20f5..a4700af43d103237628ea07b55be7c6120555b74 100644 (file)
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2379,7 +2379,7 @@ void ata_sff_error_handler(struct ata_port *ap)
        ata_reset_fn_t hardreset = ap->ops->hardreset;
        struct ata_queued_cmd *qc;
        unsigned long flags;
-       int thaw = 0;
+       bool thaw = false;
 
        qc = __ata_qc_from_tag(ap, ap->link.active_tag);
        if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
@@ -2405,15 +2405,22 @@ void ata_sff_error_handler(struct ata_port *ap)
                if (qc->err_mask == AC_ERR_TIMEOUT
                                                && (host_stat & ATA_DMA_ERR)) {
                        qc->err_mask = AC_ERR_HOST_BUS;
-                       thaw = 1;
+                       thaw = true;
                }
 
                ap->ops->bmdma_stop(qc);
+
+               /* if we're gonna thaw, make sure IRQ is clear */
+               if (thaw) {
+                       ap->ops->sff_check_status(ap);
+                       ap->ops->sff_irq_clear(ap);
+
+                       spin_unlock_irqrestore(ap->lock, flags);
+                       ata_eh_thaw_port(ap);
+                       spin_lock_irqsave(ap->lock, flags);
+               }
        }
 
-       ata_sff_sync(ap);               /* FIXME: We don't need this */
-       ap->ops->sff_check_status(ap);
-       ap->ops->sff_irq_clear(ap);
        /* We *MUST* do FIFO draining before we issue a reset as several
         * devices helpfully clear their internal state and will lock solid
         * if we touch the data port post reset. Pass qc in case anyone wants
@@ -2424,9 +2431,6 @@ void ata_sff_error_handler(struct ata_port *ap)
 
        spin_unlock_irqrestore(ap->lock, flags);
 
-       if (thaw)
-               ata_eh_thaw_port(ap);
-
        /* PIO and DMA engines have been stopped, perform recovery */
 
        /* Ignore ata_sff_softreset if ctl isn't accessible and