tty: serial: Fix mediatek UART driver setting baudrate issue

In mtk8250_set_termios function, calculating quot value can not be zero,
otherwise, using DIV_ROUND_CLOSEST(port->uartclk, quot * baud) will fail due to
divisor is zero.

Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 8f37d57165ecf49866b839c301fe1759c34551a9..6f93123a428afcc58afffa4108218477b3a2f5b9 100644 (file)
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -74,14 +74,14 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
                /* Set to next lower baudrate supported */
                if ((baud == 500000) || (baud == 576000))
                        baud = 460800;
-               quot = DIV_ROUND_CLOSEST(port->uartclk, 4 * baud);
+               quot = DIV_ROUND_UP(port->uartclk, 4 * baud);
        } else {
                serial_port_out(port, UART_MTK_HIGHS, 0x3);
 
                /* Set to highest baudrate supported */
                if (baud >= 1152000)
                        baud = 921600;
-               quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+               quot = DIV_ROUND_UP(port->uartclk, 256 * baud);
        }
 
        /*