ARM: dts: am43x-epos: Add qspi device

This patch adds qspi nodes for am43xx SOC devices.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 957ecfd84ef7679b7f85ca0954aa90993eb60b20..ac37ac9cab316dd7bfc8e9536885e460a28d4f8f 100644 (file)
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -829,6 +829,17 @@
                                status = "disabled";
                        };
                };
+
+               qspi: qspi@47900000 {
+                       compatible = "ti,am4372-qspi";
+                       reg = <0x47900000 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       ti,hwmods = "qspi";
+                       interrupts = <0 138 0x4>;
+                       num-cs = <4>;
+                       status = "disabled";
+               };
        };
 };
 

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 1a4946a76ea2aeb2dab6984dc4b0ad155d64e42b..ce5fc3909771e6f1bc9c0ff22792e20cbfb9b451 100644 (file)
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -138,6 +138,17 @@
                                0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
                        >;
                };
+
+               qspi1_default: qspi1_default {
+                       pinctrl-single,pins = <
+                               0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
+                               0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
+                               0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
+                               0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
+                               0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
+                               0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+                       >;
+               };
        };
 
        matrix_keypad: matrix_keypad@0 {
@@ -385,3 +396,55 @@
        dr_mode = "host";
        status = "okay";
 };
+
+&qspi {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&qspi1_default>;
+
+       spi-max-frequency = <48000000>;
+       m25p80@0 {
+               compatible = "mx66l51235l";
+               spi-max-frequency = <48000000>;
+               reg = <0>;
+               spi-cpol;
+               spi-cpha;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <4>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               /* MTD partition table.
+                * The ROM checks the first 512KiB
+                * for a valid file to boot(XIP).
+                */
+               partition@0 {
+                       label = "QSPI.U_BOOT";
+                       reg = <0x00000000 0x000080000>;
+               };
+               partition@1 {
+                       label = "QSPI.U_BOOT.backup";
+                       reg = <0x00080000 0x00080000>;
+               };
+               partition@2 {
+                       label = "QSPI.U-BOOT-SPL_OS";
+                       reg = <0x00100000 0x00010000>;
+               };
+               partition@3 {
+                       label = "QSPI.U_BOOT_ENV";
+                       reg = <0x00110000 0x00010000>;
+               };
+               partition@4 {
+                       label = "QSPI.U-BOOT-ENV.backup";
+                       reg = <0x00120000 0x00010000>;
+               };
+               partition@5 {
+                       label = "QSPI.KERNEL";
+                       reg = <0x00130000 0x0800000>;
+               };
+               partition@6 {
+                       label = "QSPI.FILESYSTEM";
+                       reg = <0x00930000 0x36D0000>;
+               };
+       };
+};