This patch adapts flow_ctrl function to prepare it for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
void (*set_filter)(struct mac_device_info *hw, struct net_device *dev);
/* Flow control setting */
void (*flow_ctrl)(struct mac_device_info *hw, unsigned int duplex,
- unsigned int fc, unsigned int pause_time);
+ unsigned int fc, unsigned int pause_time, u32 tx_cnt);
/* Set power management mode (e.g. magic frame) */
void (*pmt)(struct mac_device_info *hw, unsigned long mode);
/* Set/Get Unicast MAC addresses */
static void dwmac1000_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
- unsigned int fc, unsigned int pause_time)
+ unsigned int fc, unsigned int pause_time,
+ u32 tx_cnt)
{
void __iomem *ioaddr = hw->pcsr;
/* Set flow such that DZPQ in Mac Register 6 is 0,
}
static void dwmac100_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
- unsigned int fc, unsigned int pause_time)
+ unsigned int fc, unsigned int pause_time,
+ u32 tx_cnt)
{
void __iomem *ioaddr = hw->pcsr;
unsigned int flow = MAC_FLOW_CTRL_ENABLE;
}
static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
- unsigned int fc, unsigned int pause_time)
+ unsigned int fc, unsigned int pause_time,
+ u32 tx_cnt)
{
void __iomem *ioaddr = hw->pcsr;
- u32 channel = STMMAC_CHAN0; /* FIXME */
unsigned int flow = 0;
+ u32 queue = 0;
pr_debug("GMAC Flow-Control:\n");
if (fc & FLOW_RX) {
}
if (fc & FLOW_TX) {
pr_debug("\tTransmit Flow-Control ON\n");
- flow |= GMAC_TX_FLOW_CTRL_TFE;
- writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel));
- if (duplex) {
+ if (duplex)
pr_debug("\tduplex mode: PAUSE %d\n", pause_time);
- flow |= (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT);
- writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel));
+
+ for (queue = 0; queue < tx_cnt; queue++) {
+ flow |= GMAC_TX_FLOW_CTRL_TFE;
+
+ if (duplex)
+ flow |=
+ (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT);
+
+ writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
}
}
}
struct ethtool_pauseparam *pause)
{
struct stmmac_priv *priv = netdev_priv(netdev);
+ u32 tx_cnt = priv->plat->tx_queues_to_use;
struct phy_device *phy = netdev->phydev;
int new_pause = FLOW_OFF;
}
priv->hw->mac->flow_ctrl(priv->hw, phy->duplex, priv->flow_ctrl,
- priv->pause);
+ priv->pause, tx_cnt);
return 0;
}
stmmac_ptp_unregister(priv);
}
+/**
+ * stmmac_mac_flow_ctrl - Configure flow control in all queues
+ * @priv: driver private structure
+ * Description: It is used for configuring the flow control in all queues
+ */
+static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
+{
+ u32 tx_cnt = priv->plat->tx_queues_to_use;
+
+ priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl,
+ priv->pause, tx_cnt);
+}
+
/**
* stmmac_adjust_link - adjusts the link parameters
* @dev: net device structure
struct phy_device *phydev = dev->phydev;
unsigned long flags;
int new_state = 0;
- unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
if (!phydev)
return;
}
/* Flow Control operation */
if (phydev->pause)
- priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex,
- fc, pause_time);
+ stmmac_mac_flow_ctrl(priv, phydev->duplex);
if (phydev->speed != priv->speed) {
new_state = 1;