/* Sys PLL */
switch (state->id) {
- case V4L2_IDENT_CX23888_AV:
+ case CX23888_AV:
/*
* 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz
* 572.73 MHz before post divide
cx25840_write4(client, 0x42c, 0x42600000);
cx25840_write4(client, 0x44c, 0x161f1000);
break;
- case V4L2_IDENT_CX23887_AV:
+ case CX23887_AV:
/*
* 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz
* 572.73 MHz before post divide
cx25840_write4(client, 0x11c, 0x01d1744c);
cx25840_write4(client, 0x118, 0x00000416);
break;
- case V4L2_IDENT_CX23885_AV:
+ case CX23885_AV:
default:
/*
* 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz
/* HVR1850 */
switch (state->id) {
- case V4L2_IDENT_CX23888_AV:
+ case CX23888_AV:
/* 888/HVR1250 specific */
cx25840_write4(client, 0x10c, 0x13333333);
cx25840_write4(client, 0x108, 0x00000515);
* 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz
*/
switch (state->id) {
- case V4L2_IDENT_CX23888_AV:
+ case CX23888_AV:
/*
* 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz
* 368.64 MHz before post divide
cx25840_write4(client, 0x114, 0x017dbf48);
cx25840_write4(client, 0x110, 0x000a030e);
break;
- case V4L2_IDENT_CX23887_AV:
+ case CX23887_AV:
/*
* 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz
* 368.64 MHz before post divide
cx25840_write4(client, 0x114, 0x017dbf48);
cx25840_write4(client, 0x110, 0x000a030e);
break;
- case V4L2_IDENT_CX23885_AV:
+ case CX23885_AV:
default:
/*
* 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz
ret = cx25840_read4(client, 0x300);
if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) {
/* No DIF */
- ret = V4L2_IDENT_CX23885_AV;
+ ret = CX23885_AV;
} else {
/* CX23887 has a broken DIF, but the registers
* appear valid (but unused), good enough to detect. */
- ret = V4L2_IDENT_CX23887_AV;
+ ret = CX23887_AV;
}
} else if (cx25840_read4(client, 0x300) & 0x0fffffff) {
/* DIF PLL Freq Word reg exists; chip must be a CX23888 */
- ret = V4L2_IDENT_CX23888_AV;
+ ret = CX23888_AV;
} else {
v4l_err(client, "Unable to detect h/w, assuming cx23887\n");
- ret = V4L2_IDENT_CX23887_AV;
+ ret = CX23887_AV;
}
/* Back into digital power down */
struct cx25840_state *state;
struct v4l2_subdev *sd;
int default_volume;
- u32 id = V4L2_IDENT_NONE;
+ u32 id;
u16 device_id;
/* Check if the adapter supports the needed features */
/* The high byte of the device ID should be
* 0x83 for the cx2583x and 0x84 for the cx2584x */
if ((device_id & 0xff00) == 0x8300) {
- id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
+ id = CX25836 + ((device_id >> 4) & 0xf) - 6;
} else if ((device_id & 0xff00) == 0x8400) {
- id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
+ id = CX25840 + ((device_id >> 4) & 0xf);
} else if (device_id == 0x0000) {
id = get_cx2388x_ident(client);
} else if ((device_id & 0xfff0) == 0x5A30) {
/* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */
- id = V4L2_IDENT_CX2310X_AV;
+ id = CX2310X_AV;
} else if ((device_id & 0xff) == (device_id >> 8)) {
v4l_err(client,
"likely a confused/unresponsive cx2388[578] A/V decoder"
v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
switch (id) {
- case V4L2_IDENT_CX23885_AV:
+ case CX23885_AV:
v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
- case V4L2_IDENT_CX23887_AV:
+ case CX23887_AV:
v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
- case V4L2_IDENT_CX23888_AV:
+ case CX23888_AV:
v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
- case V4L2_IDENT_CX2310X_AV:
+ case CX2310X_AV:
v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n",
device_id, client->addr << 1, client->adapter->name);
break;
- case V4L2_IDENT_CX25840:
- case V4L2_IDENT_CX25841:
- case V4L2_IDENT_CX25842:
- case V4L2_IDENT_CX25843:
+ case CX25840:
+ case CX25841:
+ case CX25842:
+ case CX25843:
/* Note: revision '(device_id & 0x0f) == 2' was never built. The
marking skips from 0x1 == 22 to 0x3 == 23. */
v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n",
: (device_id & 0x0f),
client->addr << 1, client->adapter->name);
break;
- case V4L2_IDENT_CX25836:
- case V4L2_IDENT_CX25837:
+ case CX25836:
+ case CX25837:
default:
v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n",
(device_id & 0xfff0) >> 4, device_id & 0x0f,
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
#include <linux/i2c.h>
struct cx25840_ir_state;
+enum cx25840_model {
+ CX23885_AV,
+ CX23887_AV,
+ CX23888_AV,
+ CX2310X_AV,
+ CX25840,
+ CX25841,
+ CX25842,
+ CX25843,
+ CX25836,
+ CX25837,
+};
+
struct cx25840_state {
struct i2c_client *c;
struct v4l2_subdev sd;
u32 audclk_freq;
int audmode;
int vbi_line_offset;
- u32 id;
+ enum cx25840_model id;
u32 rev;
int is_initialized;
wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
static inline bool is_cx2583x(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX25836 ||
- state->id == V4L2_IDENT_CX25837;
+ return state->id == CX25836 ||
+ state->id == CX25837;
}
static inline bool is_cx231xx(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX2310X_AV;
+ return state->id == CX2310X_AV;
}
static inline bool is_cx2388x(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX23885_AV ||
- state->id == V4L2_IDENT_CX23887_AV ||
- state->id == V4L2_IDENT_CX23888_AV;
+ return state->id == CX23885_AV ||
+ state->id == CX23887_AV ||
+ state->id == CX23888_AV;
}
static inline bool is_cx23885(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX23885_AV;
+ return state->id == CX23885_AV;
}
static inline bool is_cx23887(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX23887_AV;
+ return state->id == CX23887_AV;
}
static inline bool is_cx23888(struct cx25840_state *state)
{
- return state->id == V4L2_IDENT_CX23888_AV;
+ return state->id == CX23888_AV;
}
/* ----------------------------------------------------------------------- */