gpio: rcar: Add Runtime PM handling for interrupts

The R-Car GPIO driver handles Runtime PM for requested GPIOs only.

When using a GPIO purely as an interrupt source, no Runtime PM handling
is done, and the GPIO module's clock may not be enabled.

To fix this:
  - Add .irq_request_resources() and .irq_release_resources() callbacks
    to handle Runtime PM when an interrupt is requested,
  - Add irq_bus_lock() and sync_unlock() callbacks to handle Runtime PM
    when e.g. disabling/enabling an interrupt, or configuring the
    interrupt type.

Fixes: d5c3d84657db57bd "net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS"
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index cf41440aff91971e89090138e7912a3713427623..d9ab0cd1d205963528d7022d66213c26bf8304e5 100644 (file)
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -196,6 +196,44 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
        return 0;
 }
 
+static void gpio_rcar_irq_bus_lock(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+
+       pm_runtime_get_sync(&p->pdev->dev);
+}
+
+static void gpio_rcar_irq_bus_sync_unlock(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+
+       pm_runtime_put(&p->pdev->dev);
+}
+
+
+static int gpio_rcar_irq_request_resources(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+       int error;
+
+       error = pm_runtime_get_sync(&p->pdev->dev);
+       if (error < 0)
+               return error;
+
+       return 0;
+}
+
+static void gpio_rcar_irq_release_resources(struct irq_data *d)
+{
+       struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+       struct gpio_rcar_priv *p = gpiochip_get_data(gc);
+
+       pm_runtime_put(&p->pdev->dev);
+}
+
 static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
 {
        struct gpio_rcar_priv *p = dev_id;
@@ -450,6 +488,10 @@ static int gpio_rcar_probe(struct platform_device *pdev)
        irq_chip->irq_unmask = gpio_rcar_irq_enable;
        irq_chip->irq_set_type = gpio_rcar_irq_set_type;
        irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
+       irq_chip->irq_bus_lock = gpio_rcar_irq_bus_lock;
+       irq_chip->irq_bus_sync_unlock = gpio_rcar_irq_bus_sync_unlock;
+       irq_chip->irq_request_resources = gpio_rcar_irq_request_resources;
+       irq_chip->irq_release_resources = gpio_rcar_irq_release_resources;
        irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
 
        ret = gpiochip_add_data(gpio_chip, p);