m68knommu: move ColdFire timers.c to its own coldfire directory
authorGreg Ungerer <gerg@snapgear.com>
Fri, 1 Feb 2008 07:37:39 +0000 (17:37 +1000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 1 Feb 2008 09:58:10 +0000 (20:58 +1100)
Move common ColdFire CPU timers.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the
arch/m68knommu/platform/5307 directory. This is confusing, the files
containing this common code are in no way specific to the 5307 ColdFire.
Create an arch/m68knommu/platform/coldfire directory to contain this
common code. Other m68knommu CPU varients do not need use this code
though, so it doesn't make sense to move it to arch/m68knommu/kernel.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/m68knommu/platform/5307/timers.c [deleted file]
arch/m68knommu/platform/coldfire/timers.c [new file with mode: 0644]

diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
deleted file mode 100644 (file)
index 489dec8..0000000
+++ /dev/null
@@ -1,155 +0,0 @@
-/***************************************************************************/
-
-/*
- *     timers.c -- generic ColdFire hardware timer support.
- *
- *     Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcftimer.h>
-#include <asm/mcfsim.h>
-
-/***************************************************************************/
-
-/*
- *     By default use timer1 as the system clock timer.
- */
-#define        TA(a)   (MCF_MBAR + MCFTIMER_BASE1 + (a))
-
-/*
- *     Default the timer and vector to use for ColdFire. Some ColdFire
- *     CPU's and some boards may want different. Their sub-architecture
- *     startup code (in config.c) can change these if they want.
- */
-unsigned int   mcf_timervector = 29;
-unsigned int   mcf_profilevector = 31;
-unsigned int   mcf_timerlevel = 5;
-
-/*
- *     These provide the underlying interrupt vector support.
- *     Unfortunately it is a little different on each ColdFire.
- */
-extern void mcf_settimericr(int timer, int level);
-extern int mcf_timerirqpending(int timer);
-
-#if defined(CONFIG_M532x)
-#define        __raw_readtrr   __raw_readl
-#define        __raw_writetrr  __raw_writel
-#else
-#define        __raw_readtrr   __raw_readw
-#define        __raw_writetrr  __raw_writew
-#endif
-
-/***************************************************************************/
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-       /* Reset the ColdFire timer */
-       __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
-
-       return arch_timer_interrupt(irq, dummy);
-}
-
-/***************************************************************************/
-
-static struct irqaction coldfire_timer_irq = {
-       .name    = "timer",
-       .flags   = IRQF_DISABLED | IRQF_TIMER,
-       .handler = hw_tick,
-};
-
-/***************************************************************************/
-
-static int ticks_per_intr;
-
-void hw_timer_init(void)
-{
-       setup_irq(mcf_timervector, &coldfire_timer_irq);
-
-       __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
-       ticks_per_intr = (MCF_BUSCLK / 16) / HZ;
-       __raw_writetrr(ticks_per_intr - 1, TA(MCFTIMER_TRR));
-       __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-               MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
-
-       mcf_settimericr(1, mcf_timerlevel);
-
-#ifdef CONFIG_HIGHPROFILE
-       coldfire_profile_init();
-#endif
-}
-
-/***************************************************************************/
-
-unsigned long hw_timer_offset(void)
-{
-       unsigned long tcn, offset;
-
-       tcn = __raw_readw(TA(MCFTIMER_TCN));
-       offset = ((tcn + 1) * (1000000 / HZ)) / ticks_per_intr;
-
-       /* Check if we just wrapped the counters and maybe missed a tick */
-       if ((offset < (1000000 / HZ / 2)) && mcf_timerirqpending(1))
-               offset += 1000000 / HZ;
-       return offset;
-}
-
-/***************************************************************************/
-#ifdef CONFIG_HIGHPROFILE
-/***************************************************************************/
-
-/*
- *     By default use timer2 as the profiler clock timer.
- */
-#define        PA(a)   (MCF_MBAR + MCFTIMER_BASE2 + (a))
-
-/*
- *     Choose a reasonably fast profile timer. Make it an odd value to
- *     try and get good coverage of kernel operations.
- */
-#define        PROFILEHZ       1013
-
-/*
- *     Use the other timer to provide high accuracy profiling info.
- */
-irqreturn_t coldfire_profile_tick(int irq, void *dummy)
-{
-       /* Reset ColdFire timer2 */
-       __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
-       if (current->pid)
-               profile_tick(CPU_PROFILING, regs);
-       return IRQ_HANDLED;
-}
-
-/***************************************************************************/
-
-void coldfire_profile_init(void)
-{
-       printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
-
-       /* Set up TIMER 2 as high speed profile clock */
-       __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
-
-       __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
-       __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
-               MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
-
-       request_irq(mcf_profilevector, coldfire_profile_tick,
-               (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
-       mcf_settimericr(2, 7);
-}
-
-/***************************************************************************/
-#endif /* CONFIG_HIGHPROFILE */
-/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
new file mode 100644 (file)
index 0000000..489dec8
--- /dev/null
@@ -0,0 +1,155 @@
+/***************************************************************************/
+
+/*
+ *     timers.c -- generic ColdFire hardware timer support.
+ *
+ *     Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *     By default use timer1 as the system clock timer.
+ */
+#define        TA(a)   (MCF_MBAR + MCFTIMER_BASE1 + (a))
+
+/*
+ *     Default the timer and vector to use for ColdFire. Some ColdFire
+ *     CPU's and some boards may want different. Their sub-architecture
+ *     startup code (in config.c) can change these if they want.
+ */
+unsigned int   mcf_timervector = 29;
+unsigned int   mcf_profilevector = 31;
+unsigned int   mcf_timerlevel = 5;
+
+/*
+ *     These provide the underlying interrupt vector support.
+ *     Unfortunately it is a little different on each ColdFire.
+ */
+extern void mcf_settimericr(int timer, int level);
+extern int mcf_timerirqpending(int timer);
+
+#if defined(CONFIG_M532x)
+#define        __raw_readtrr   __raw_readl
+#define        __raw_writetrr  __raw_writel
+#else
+#define        __raw_readtrr   __raw_readw
+#define        __raw_writetrr  __raw_writew
+#endif
+
+/***************************************************************************/
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+       /* Reset the ColdFire timer */
+       __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
+
+       return arch_timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static struct irqaction coldfire_timer_irq = {
+       .name    = "timer",
+       .flags   = IRQF_DISABLED | IRQF_TIMER,
+       .handler = hw_tick,
+};
+
+/***************************************************************************/
+
+static int ticks_per_intr;
+
+void hw_timer_init(void)
+{
+       setup_irq(mcf_timervector, &coldfire_timer_irq);
+
+       __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+       ticks_per_intr = (MCF_BUSCLK / 16) / HZ;
+       __raw_writetrr(ticks_per_intr - 1, TA(MCFTIMER_TRR));
+       __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+               MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
+
+       mcf_settimericr(1, mcf_timerlevel);
+
+#ifdef CONFIG_HIGHPROFILE
+       coldfire_profile_init();
+#endif
+}
+
+/***************************************************************************/
+
+unsigned long hw_timer_offset(void)
+{
+       unsigned long tcn, offset;
+
+       tcn = __raw_readw(TA(MCFTIMER_TCN));
+       offset = ((tcn + 1) * (1000000 / HZ)) / ticks_per_intr;
+
+       /* Check if we just wrapped the counters and maybe missed a tick */
+       if ((offset < (1000000 / HZ / 2)) && mcf_timerirqpending(1))
+               offset += 1000000 / HZ;
+       return offset;
+}
+
+/***************************************************************************/
+#ifdef CONFIG_HIGHPROFILE
+/***************************************************************************/
+
+/*
+ *     By default use timer2 as the profiler clock timer.
+ */
+#define        PA(a)   (MCF_MBAR + MCFTIMER_BASE2 + (a))
+
+/*
+ *     Choose a reasonably fast profile timer. Make it an odd value to
+ *     try and get good coverage of kernel operations.
+ */
+#define        PROFILEHZ       1013
+
+/*
+ *     Use the other timer to provide high accuracy profiling info.
+ */
+irqreturn_t coldfire_profile_tick(int irq, void *dummy)
+{
+       /* Reset ColdFire timer2 */
+       __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
+       if (current->pid)
+               profile_tick(CPU_PROFILING, regs);
+       return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+void coldfire_profile_init(void)
+{
+       printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
+
+       /* Set up TIMER 2 as high speed profile clock */
+       __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
+
+       __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+       __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+               MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
+
+       request_irq(mcf_profilevector, coldfire_profile_tick,
+               (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
+       mcf_settimericr(2, 7);
+}
+
+/***************************************************************************/
+#endif /* CONFIG_HIGHPROFILE */
+/***************************************************************************/