serial: fsl_lpuart: RS485 RTS polariy is inverse

commit 846651eca073e2e02e37490a4a52752415d84781 upstream.

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index a4c1797e30d719f9bd5d8e9f2b878926f00d3a52..8cc35656c71da566dd84993d0f8e7d5d0b25ba5a 100644 (file)
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -951,9 +951,9 @@ static int lpuart_config_rs485(struct uart_port *port,
                 * Note: UART is assumed to be active high.
                 */
                if (rs485->flags & SER_RS485_RTS_ON_SEND)
-                       modem &= ~UARTMODEM_TXRTSPOL;
-               else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
                        modem |= UARTMODEM_TXRTSPOL;
+               else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+                       modem &= ~UARTMODEM_TXRTSPOL;
        }
 
        /* Store the new configuration */