--- /dev/null
+SAS Layer
+---------
+
+The SAS Layer is a management infrastructure which manages
+SAS LLDDs. It sits between SCSI Core and SAS LLDDs. The
+layout is as follows: while SCSI Core is concerned with
+SAM/SPC issues, and a SAS LLDD+sequencer is concerned with
+phy/OOB/link management, the SAS layer is concerned with:
+
+ * SAS Phy/Port/HA event management (LLDD generates,
+ SAS Layer processes),
+ * SAS Port management (creation/destruction),
+ * SAS Domain discovery and revalidation,
+ * SAS Domain device management,
+ * SCSI Host registration/unregistration,
+ * Device registration with SCSI Core (SAS) or libata
+ (SATA), and
+ * Expander management and exporting expander control
+ to user space.
+
+A SAS LLDD is a PCI device driver. It is concerned with
+phy/OOB management, and vendor specific tasks and generates
+events to the SAS layer.
+
+The SAS Layer does most SAS tasks as outlined in the SAS 1.1
+spec.
+
+The sas_ha_struct describes the SAS LLDD to the SAS layer.
+Most of it is used by the SAS Layer but a few fields need to
+be initialized by the LLDDs.
+
+After initializing your hardware, from the probe() function
+you call sas_register_ha(). It will register your LLDD with
+the SCSI subsystem, creating a SCSI host and it will
+register your SAS driver with the sysfs SAS tree it creates.
+It will then return. Then you enable your phys to actually
+start OOB (at which point your driver will start calling the
+notify_* event callbacks).
+
+Structure descriptions:
+
+struct sas_phy --------------------
+Normally this is statically embedded to your driver's
+phy structure:
+ struct my_phy {
+ blah;
+ struct sas_phy sas_phy;
+ bleh;
+ };
+And then all the phys are an array of my_phy in your HA
+struct (shown below).
+
+Then as you go along and initialize your phys you also
+initialize the sas_phy struct, along with your own
+phy structure.
+
+In general, the phys are managed by the LLDD and the ports
+are managed by the SAS layer. So the phys are initialized
+and updated by the LLDD and the ports are initialized and
+updated by the SAS layer.
+
+There is a scheme where the LLDD can RW certain fields,
+and the SAS layer can only read such ones, and vice versa.
+The idea is to avoid unnecessary locking.
+
+enabled -- must be set (0/1)
+id -- must be set [0,MAX_PHYS)
+class, proto, type, role, oob_mode, linkrate -- must be set
+oob_mode -- you set this when OOB has finished and then notify
+the SAS Layer.
+
+sas_addr -- this normally points to an array holding the sas
+address of the phy, possibly somewhere in your my_phy
+struct.
+
+attached_sas_addr -- set this when you (LLDD) receive an
+IDENTIFY frame or a FIS frame, _before_ notifying the SAS
+layer. The idea is that sometimes the LLDD may want to fake
+or provide a different SAS address on that phy/port and this
+allows it to do this. At best you should copy the sas
+address from the IDENTIFY frame or maybe generate a SAS
+address for SATA directly attached devices. The Discover
+process may later change this.
+
+frame_rcvd -- this is where you copy the IDENTIFY/FIS frame
+when you get it; you lock, copy, set frame_rcvd_size and
+unlock the lock, and then call the event. It is a pointer
+since there's no way to know your hw frame size _exactly_,
+so you define the actual array in your phy struct and let
+this pointer point to it. You copy the frame from your
+DMAable memory to that area holding the lock.
+
+sas_prim -- this is where primitives go when they're
+received. See sas.h. Grab the lock, set the primitive,
+release the lock, notify.
+
+port -- this points to the sas_port if the phy belongs
+to a port -- the LLDD only reads this. It points to the
+sas_port this phy is part of. Set by the SAS Layer.
+
+ha -- may be set; the SAS layer sets it anyway.
+
+lldd_phy -- you should set this to point to your phy so you
+can find your way around faster when the SAS layer calls one
+of your callbacks and passes you a phy. If the sas_phy is
+embedded you can also use container_of -- whatever you
+prefer.
+
+
+struct sas_port --------------------
+The LLDD doesn't set any fields of this struct -- it only
+reads them. They should be self explanatory.
+
+phy_mask is 32 bit, this should be enough for now, as I
+haven't heard of a HA having more than 8 phys.
+
+lldd_port -- I haven't found use for that -- maybe other
+LLDD who wish to have internal port representation can make
+use of this.
+
+
+struct sas_ha_struct --------------------
+It normally is statically declared in your own LLDD
+structure describing your adapter:
+struct my_sas_ha {
+ blah;
+ struct sas_ha_struct sas_ha;
+ struct my_phy phys[MAX_PHYS];
+ struct sas_port sas_ports[MAX_PHYS]; /* (1) */
+ bleh;
+};
+
+(1) If your LLDD doesn't have its own port representation.
+
+What needs to be initialized (sample function given below).
+
+pcidev
+sas_addr -- since the SAS layer doesn't want to mess with
+ memory allocation, etc, this points to statically
+ allocated array somewhere (say in your host adapter
+ structure) and holds the SAS address of the host
+ adapter as given by you or the manufacturer, etc.
+sas_port
+sas_phy -- an array of pointers to structures. (see
+ note above on sas_addr).
+ These must be set. See more notes below.
+num_phys -- the number of phys present in the sas_phy array,
+ and the number of ports present in the sas_port
+ array. There can be a maximum num_phys ports (one per
+ port) so we drop the num_ports, and only use
+ num_phys.
+
+The event interface:
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct sas_phy *, enum phy_event);
+
+When sas_register_ha() returns, those are set and can be
+called by the LLDD to notify the SAS layer of such events
+the SAS layer.
+
+The port notification:
+
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct sas_phy *);
+ void (*lldd_port_deformed)(struct sas_phy *);
+
+If the LLDD wants notification when a port has been formed
+or deformed it sets those to a function satisfying the type.
+
+A SAS LLDD should also implement at least one of the Task
+Management Functions (TMFs) described in SAM:
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+For more information please read SAM from T10.org.
+
+Port and Adapter management:
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+A SAS LLDD should implement at least one of those.
+
+Phy management:
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct sas_phy *, enum phy_func);
+
+lldd_ha -- set this to point to your HA struct. You can also
+use container_of if you embedded it as shown above.
+
+A sample initialization and registration function
+can look like this (called last thing from probe())
+*but* before you enable the phys to do OOB:
+
+static int register_sas_ha(struct my_sas_ha *my_ha)
+{
+ int i;
+ static struct sas_phy *sas_phys[MAX_PHYS];
+ static struct sas_port *sas_ports[MAX_PHYS];
+
+ my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0];
+
+ for (i = 0; i < MAX_PHYS; i++) {
+ sas_phys[i] = &my_ha->phys[i].sas_phy;
+ sas_ports[i] = &my_ha->sas_ports[i];
+ }
+
+ my_ha->sas_ha.sas_phy = sas_phys;
+ my_ha->sas_ha.sas_port = sas_ports;
+ my_ha->sas_ha.num_phys = MAX_PHYS;
+
+ my_ha->sas_ha.lldd_port_formed = my_port_formed;
+
+ my_ha->sas_ha.lldd_dev_found = my_dev_found;
+ my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
+
+ my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
+
+ my_ha->sas_ha.lldd_queue_size = ha_can_queue;
+ my_ha->sas_ha.lldd_execute_task = my_execute_task;
+
+ my_ha->sas_ha.lldd_abort_task = my_abort_task;
+ my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set;
+ my_ha->sas_ha.lldd_clear_aca = my_clear_aca;
+ my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set;
+ my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2)
+ my_ha->sas_ha.lldd_lu_reset = my_lu_reset;
+ my_ha->sas_ha.lldd_query_task = my_query_task;
+
+ my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port;
+ my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha;
+
+ my_ha->sas_ha.lldd_control_phy = my_control_phy;
+
+ return sas_register_ha(&my_ha->sas_ha);
+}
+
+(1) This is normally a LLDD parameter, something of the
+lines of a task collector. What it tells the SAS Layer is
+whether the SAS layer should run in Direct Mode (default:
+value 0 or 1) or Task Collector Mode (value greater than 1).
+
+In Direct Mode, the SAS Layer calls Execute Task as soon as
+it has a command to send to the SDS, _and_ this is a single
+command, i.e. not linked.
+
+Some hardware (e.g. aic94xx) has the capability to DMA more
+than one task at a time (interrupt) from host memory. Task
+Collector Mode is an optional feature for HAs which support
+this in their hardware. (Again, it is completely optional
+even if your hardware supports it.)
+
+In Task Collector Mode, the SAS Layer would do _natural_
+coalescing of tasks and at the appropriate moment it would
+call your driver to DMA more than one task in a single HA
+interrupt. DMBS may want to use this by insmod/modprobe
+setting the lldd_max_execute_num to something greater than
+1.
+
+(2) SAS 1.1 does not define I_T Nexus Reset TMF.
+
+Events
+------
+
+Events are _the only way_ a SAS LLDD notifies the SAS layer
+of anything. There is no other method or way a LLDD to tell
+the SAS layer of anything happening internally or in the SAS
+domain.
+
+Phy events:
+ PHYE_LOSS_OF_SIGNAL, (C)
+ PHYE_OOB_DONE,
+ PHYE_OOB_ERROR, (C)
+ PHYE_SPINUP_HOLD.
+
+Port events, passed on a _phy_:
+ PORTE_BYTES_DMAED, (M)
+ PORTE_BROADCAST_RCVD, (E)
+ PORTE_LINK_RESET_ERR, (C)
+ PORTE_TIMER_EVENT, (C)
+ PORTE_HARD_RESET.
+
+Host Adapter event:
+ HAE_RESET
+
+A SAS LLDD should be able to generate
+ - at least one event from group C (choice),
+ - events marked M (mandatory) are mandatory (only one),
+ - events marked E (expander) if it wants the SAS layer
+ to handle domain revalidation (only one such).
+ - Unmarked events are optional.
+
+Meaning:
+
+HAE_RESET -- when your HA got internal error and was reset.
+
+PORTE_BYTES_DMAED -- on receiving an IDENTIFY/FIS frame
+PORTE_BROADCAST_RCVD -- on receiving a primitive
+PORTE_LINK_RESET_ERR -- timer expired, loss of signal, loss
+of DWS, etc. (*)
+PORTE_TIMER_EVENT -- DWS reset timeout timer expired (*)
+PORTE_HARD_RESET -- Hard Reset primitive received.
+
+PHYE_LOSS_OF_SIGNAL -- the device is gone (*)
+PHYE_OOB_DONE -- OOB went fine and oob_mode is valid
+PHYE_OOB_ERROR -- Error while doing OOB, the device probably
+got disconnected. (*)
+PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent.
+
+(*) should set/clear the appropriate fields in the phy,
+ or alternatively call the inlined sas_phy_disconnected()
+ which is just a helper, from their tasklet.
+
+The Execute Command SCSI RPC:
+
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ unsigned long gfp_flags);
+
+Used to queue a task to the SAS LLDD. @task is the tasks to
+be executed. @num should be the number of tasks being
+queued at this function call (they are linked listed via
+task::list), @gfp_mask should be the gfp_mask defining the
+context of the caller.
+
+This function should implement the Execute Command SCSI RPC,
+or if you're sending a SCSI Task as linked commands, you
+should also use this function.
+
+That is, when lldd_execute_task() is called, the command(s)
+go out on the transport *immediately*. There is *no*
+queuing of any sort and at any level in a SAS LLDD.
+
+The use of task::list is two-fold, one for linked commands,
+the other discussed below.
+
+It is possible to queue up more than one task at a time, by
+initializing the list element of struct sas_task, and
+passing the number of tasks enlisted in this manner in num.
+
+Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
+ 0, the task(s) were queued.
+
+If you want to pass num > 1, then either
+A) you're the only caller of this function and keep track
+ of what you've queued to the LLDD, or
+B) you know what you're doing and have a strategy of
+ retrying.
+
+As opposed to queuing one task at a time (function call),
+batch queuing of tasks, by having num > 1, greatly
+simplifies LLDD code, sequencer code, and _hardware design_,
+and has some performance advantages in certain situations
+(DBMS).
+
+The LLDD advertises if it can take more than one command at
+a time at lldd_execute_task(), by setting the
+lldd_max_execute_num parameter (controlled by "collector"
+module parameter in aic94xx SAS LLDD).
+
+You should leave this to the default 1, unless you know what
+you're doing.
+
+This is a function of the LLDD, to which the SAS layer can
+cater to.
+
+int lldd_queue_size
+ The host adapter's queue size. This is the maximum
+number of commands the lldd can have pending to domain
+devices on behalf of all upper layers submitting through
+lldd_execute_task().
+
+You really want to set this to something (much) larger than
+1.
+
+This _really_ has absolutely nothing to do with queuing.
+There is no queuing in SAS LLDDs.
+
+struct sas_task {
+ dev -- the device this task is destined to
+ list -- must be initialized (INIT_LIST_HEAD)
+ task_proto -- _one_ of enum sas_proto
+ scatter -- pointer to scatter gather list array
+ num_scatter -- number of elements in scatter
+ total_xfer_len -- total number of bytes expected to be transfered
+ data_dir -- PCI_DMA_...
+ task_done -- callback when the task has finished execution
+};
+
+When an external entity, entity other than the LLDD or the
+SAS Layer, wants to work with a struct domain_device, it
+_must_ call kobject_get() when getting a handle on the
+device and kobject_put() when it is done with the device.
+
+This does two things:
+ A) implements proper kfree() for the device;
+ B) increments/decrements the kref for all players:
+ domain_device
+ all domain_device's ... (if past an expander)
+ port
+ host adapter
+ pci device
+ and up the ladder, etc.
+
+DISCOVERY
+---------
+
+The sysfs tree has the following purposes:
+ a) It shows you the physical layout of the SAS domain at
+ the current time, i.e. how the domain looks in the
+ physical world right now.
+ b) Shows some device parameters _at_discovery_time_.
+
+This is a link to the tree(1) program, very useful in
+viewing the SAS domain:
+ftp://mama.indstate.edu/linux/tree/
+I expect user space applications to actually create a
+graphical interface of this.
+
+That is, the sysfs domain tree doesn't show or keep state if
+you e.g., change the meaning of the READY LED MEANING
+setting, but it does show you the current connection status
+of the domain device.
+
+Keeping internal device state changes is responsibility of
+upper layers (Command set drivers) and user space.
+
+When a device or devices are unplugged from the domain, this
+is reflected in the sysfs tree immediately, and the device(s)
+removed from the system.
+
+The structure domain_device describes any device in the SAS
+domain. It is completely managed by the SAS layer. A task
+points to a domain device, this is how the SAS LLDD knows
+where to send the task(s) to. A SAS LLDD only reads the
+contents of the domain_device structure, but it never creates
+or destroys one.
+
+Expander management from User Space
+-----------------------------------
+
+In each expander directory in sysfs, there is a file called
+"smp_portal". It is a binary sysfs attribute file, which
+implements an SMP portal (Note: this is *NOT* an SMP port),
+to which user space applications can send SMP requests and
+receive SMP responses.
+
+Functionality is deceptively simple:
+
+1. Build the SMP frame you want to send. The format and layout
+ is described in the SAS spec. Leave the CRC field equal 0.
+open(2)
+2. Open the expander's SMP portal sysfs file in RW mode.
+write(2)
+3. Write the frame you built in 1.
+read(2)
+4. Read the amount of data you expect to receive for the frame you built.
+ If you receive different amount of data you expected to receive,
+ then there was some kind of error.
+close(2)
+All this process is shown in detail in the function do_smp_func()
+and its callers, in the file "expander_conf.c".
+
+The kernel functionality is implemented in the file
+"sas_expander.c".
+
+The program "expander_conf.c" implements this. It takes one
+argument, the sysfs file name of the SMP portal to the
+expander, and gives expander information, including routing
+tables.
+
+The SMP portal gives you complete control of the expander,
+so please be careful.
there should be no noticeable performance impact as long as you have
logging turned off.
-menu "SCSI Transport Attributes"
+menu "SCSI Transports"
depends on SCSI
config SCSI_SPI_ATTRS
If you wish to export transport-specific information about
each attached SAS device to sysfs, say Y.
+source "drivers/scsi/libsas/Kconfig"
+
endmenu
menu "SCSI low-level drivers"
module will be called aic7xxx_old.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
+source "drivers/scsi/aic94xx/Kconfig"
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
+obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
--- /dev/null
+#
+# Kernel configuration file for aic94xx SAS/SATA driver.
+#
+# Copyright (c) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (c) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Aic94xx Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#
+
+config SCSI_AIC94XX
+ tristate "Adaptec AIC94xx SAS/SATA support"
+ depends on PCI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports Adaptec's SAS/SATA 3Gb/s 64 bit PCI-X
+ AIC94xx chip based host adapters.
+
+config AIC94XX_DEBUG
+ bool "Compile in debug mode"
+ default y
+ depends on SCSI_AIC94XX
+ help
+ Compiles the aic94xx driver in debug mode. In debug mode,
+ the driver prints some messages to the console.
--- /dev/null
+#
+# Makefile for Adaptec aic94xx SAS/SATA driver.
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the the aic94xx driver.
+#
+# The aic94xx driver is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The aic94xx driver is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with the aic94xx driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ifeq ($(CONFIG_AIC94XX_DEBUG),y)
+ EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT
+endif
+
+obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o
+aic94xx-y += aic94xx_init.o \
+ aic94xx_hwi.o \
+ aic94xx_reg.o \
+ aic94xx_sds.o \
+ aic94xx_seq.o \
+ aic94xx_dump.o \
+ aic94xx_scb.o \
+ aic94xx_dev.o \
+ aic94xx_tmf.o \
+ aic94xx_task.o
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx.h#31 $
+ */
+
+#ifndef _AIC94XX_H_
+#define _AIC94XX_H_
+
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <scsi/libsas.h>
+
+#define ASD_DRIVER_NAME "aic94xx"
+#define ASD_DRIVER_DESCRIPTION "Adaptec aic94xx SAS/SATA driver"
+
+#define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__)
+
+#ifdef ASD_ENTER_EXIT
+#define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
+ __FUNCTION__)
+#define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
+ __FUNCTION__)
+#else
+#define ENTER
+#define EXIT
+#endif
+
+#ifdef ASD_DEBUG
+#define ASD_DPRINTK asd_printk
+#else
+#define ASD_DPRINTK(fmt, ...)
+#endif
+
+/* 2*ITNL timeout + 1 second */
+#define AIC94XX_SCB_TIMEOUT (5*HZ)
+
+extern kmem_cache_t *asd_dma_token_cache;
+extern kmem_cache_t *asd_ascb_cache;
+extern char sas_addr_str[2*SAS_ADDR_SIZE + 1];
+
+static inline void asd_stringify_sas_addr(char *p, const u8 *sas_addr)
+{
+ int i;
+ for (i = 0; i < SAS_ADDR_SIZE; i++, p += 2)
+ snprintf(p, 3, "%02X", sas_addr[i]);
+ *p = '\0';
+}
+
+static inline void asd_destringify_sas_addr(u8 *sas_addr, const char *p)
+{
+ int i;
+ for (i = 0; i < SAS_ADDR_SIZE; i++) {
+ u8 h, l;
+ if (!*p)
+ break;
+ h = isdigit(*p) ? *p-'0' : *p-'A'+10;
+ p++;
+ l = isdigit(*p) ? *p-'0' : *p-'A'+10;
+ p++;
+ sas_addr[i] = (h<<4) | l;
+ }
+}
+
+struct asd_ha_struct;
+struct asd_ascb;
+
+int asd_read_ocm(struct asd_ha_struct *asd_ha);
+int asd_read_flash(struct asd_ha_struct *asd_ha);
+
+int asd_dev_found(struct domain_device *dev);
+void asd_dev_gone(struct domain_device *dev);
+
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
+
+int asd_execute_task(struct sas_task *, int num, unsigned long gfp_flags);
+
+/* ---------- TMFs ---------- */
+int asd_abort_task(struct sas_task *);
+int asd_abort_task_set(struct domain_device *, u8 *lun);
+int asd_clear_aca(struct domain_device *, u8 *lun);
+int asd_clear_task_set(struct domain_device *, u8 *lun);
+int asd_lu_reset(struct domain_device *, u8 *lun);
+int asd_query_task(struct sas_task *);
+
+/* ---------- Adapter and Port management ---------- */
+int asd_clear_nexus_port(struct asd_sas_port *port);
+int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha);
+
+/* ---------- Phy Management ---------- */
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func);
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA DDB management
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_dev.c#21 $
+ */
+
+#include "aic94xx.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_sas.h"
+
+#define FIND_FREE_DDB(_ha) find_first_zero_bit((_ha)->hw_prof.ddb_bitmap, \
+ (_ha)->hw_prof.max_ddbs)
+#define SET_DDB(_ddb, _ha) set_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+#define CLEAR_DDB(_ddb, _ha) clear_bit(_ddb, (_ha)->hw_prof.ddb_bitmap)
+
+static inline int asd_get_ddb(struct asd_ha_struct *asd_ha)
+{
+ unsigned long flags;
+ int ddb, i;
+
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+ ddb = FIND_FREE_DDB(asd_ha);
+ if (ddb >= asd_ha->hw_prof.max_ddbs) {
+ ddb = -ENOMEM;
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+ goto out;
+ }
+ SET_DDB(ddb, asd_ha);
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+
+ for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
+ asd_ddbsite_write_dword(asd_ha, ddb, i, 0);
+out:
+ return ddb;
+}
+
+#define INIT_CONN_TAG offsetof(struct asd_ddb_ssp_smp_target_port, init_conn_tag)
+#define DEST_SAS_ADDR offsetof(struct asd_ddb_ssp_smp_target_port, dest_sas_addr)
+#define SEND_QUEUE_HEAD offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_head)
+#define DDB_TYPE offsetof(struct asd_ddb_ssp_smp_target_port, ddb_type)
+#define CONN_MASK offsetof(struct asd_ddb_ssp_smp_target_port, conn_mask)
+#define DDB_TARG_FLAGS offsetof(struct asd_ddb_ssp_smp_target_port, flags)
+#define DDB_TARG_FLAGS2 offsetof(struct asd_ddb_stp_sata_target_port, flags2)
+#define EXEC_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, exec_queue_tail)
+#define SEND_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_tail)
+#define SISTER_DDB offsetof(struct asd_ddb_ssp_smp_target_port, sister_ddb)
+#define MAX_CCONN offsetof(struct asd_ddb_ssp_smp_target_port, max_concurrent_conn)
+#define NUM_CTX offsetof(struct asd_ddb_ssp_smp_target_port, num_contexts)
+#define ATA_CMD_SCBPTR offsetof(struct asd_ddb_stp_sata_target_port, ata_cmd_scbptr)
+#define SATA_TAG_ALLOC_MASK offsetof(struct asd_ddb_stp_sata_target_port, sata_tag_alloc_mask)
+#define NUM_SATA_TAGS offsetof(struct asd_ddb_stp_sata_target_port, num_sata_tags)
+#define SATA_STATUS offsetof(struct asd_ddb_stp_sata_target_port, sata_status)
+#define NCQ_DATA_SCB_PTR offsetof(struct asd_ddb_stp_sata_target_port, ncq_data_scb_ptr)
+#define ITNL_TIMEOUT offsetof(struct asd_ddb_ssp_smp_target_port, itnl_timeout)
+
+static inline void asd_free_ddb(struct asd_ha_struct *asd_ha, int ddb)
+{
+ unsigned long flags;
+
+ if (!ddb || ddb >= 0xFFFF)
+ return;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TYPE, DDB_TYPE_UNUSED);
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
+ CLEAR_DDB(ddb, asd_ha);
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+}
+
+static inline void asd_set_ddb_type(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb = (int) (unsigned long) dev->lldd_dev;
+
+ if (dev->dev_type == SATA_PM_PORT)
+ asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT);
+ else if (dev->tproto)
+ asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET);
+ else
+ asd_ddbsite_write_byte(asd_ha,ddb,DDB_TYPE,DDB_TYPE_INITIATOR);
+}
+
+static int asd_init_sata_tag_ddb(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb, i;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ for (i = 0; i < sizeof(struct asd_ddb_sata_tag); i += 2)
+ asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+ asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+ SISTER_DDB, ddb);
+ return 0;
+}
+
+static inline int asd_init_sata(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb = (int) (unsigned long) dev->lldd_dev;
+ u32 qdepth = 0;
+ int res = 0;
+
+ asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+ if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) &&
+ dev->sata_dev.identify_device &&
+ dev->sata_dev.identify_device[10] != 0) {
+ u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]);
+ u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]);
+
+ if (w76 & 0x100) /* NCQ? */
+ qdepth = (w75 & 0x1F) + 1;
+ asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
+ (1<<qdepth)-1);
+ asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth);
+ }
+ if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
+ dev->dev_type == SATA_PM_PORT) {
+ struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
+ dev->frame_rcvd;
+ asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
+ }
+ asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF);
+ if (qdepth > 0)
+ res = asd_init_sata_tag_ddb(dev);
+ return res;
+}
+
+static int asd_init_target_ddb(struct domain_device *dev)
+{
+ int ddb, i;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ u8 flags = 0;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ dev->lldd_dev = (void *) (unsigned long) ddb;
+
+ asd_ddbsite_write_byte(asd_ha, ddb, 0, DDB_TP_CONN_TYPE);
+ asd_ddbsite_write_byte(asd_ha, ddb, 1, 0);
+ asd_ddbsite_write_word(asd_ha, ddb, INIT_CONN_TAG, 0xFFFF);
+ for (i = 0; i < SAS_ADDR_SIZE; i++)
+ asd_ddbsite_write_byte(asd_ha, ddb, DEST_SAS_ADDR+i,
+ dev->sas_addr[i]);
+ asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_HEAD, 0xFFFF);
+ asd_set_ddb_type(dev);
+ asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask);
+ if (dev->port->oob_mode != SATA_OOB_MODE) {
+ flags |= OPEN_REQUIRED;
+ if ((dev->dev_type == SATA_DEV) ||
+ (dev->tproto & SAS_PROTO_STP)) {
+ struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
+ if (rps_resp->frame_type == SMP_RESPONSE &&
+ rps_resp->function == SMP_REPORT_PHY_SATA &&
+ rps_resp->result == SMP_RESP_FUNC_ACC) {
+ if (rps_resp->rps.affil_valid)
+ flags |= STP_AFFIL_POL;
+ if (rps_resp->rps.affil_supp)
+ flags |= SUPPORTS_AFFIL;
+ }
+ } else {
+ flags |= CONCURRENT_CONN_SUPP;
+ if (!dev->parent &&
+ (dev->dev_type == EDGE_DEV ||
+ dev->dev_type == FANOUT_DEV))
+ asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+ 4);
+ else
+ asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
+ dev->pathways);
+ asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1);
+ }
+ }
+ if (dev->dev_type == SATA_PM)
+ flags |= SATA_MULTIPORT;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
+
+ flags = 0;
+ if (dev->tproto & SAS_PROTO_STP)
+ flags |= STP_CL_POL_NO_TX;
+ asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags);
+
+ asd_ddbsite_write_word(asd_ha, ddb, EXEC_QUEUE_TAIL, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) {
+ i = asd_init_sata(dev);
+ if (i < 0) {
+ asd_free_ddb(asd_ha, ddb);
+ return i;
+ }
+ }
+
+ if (dev->dev_type == SAS_END_DEV) {
+ struct sas_end_device *rdev = rphy_to_end_device(dev->rphy);
+ if (rdev->I_T_nexus_loss_timeout > 0)
+ asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+ min(rdev->I_T_nexus_loss_timeout,
+ (u16)ITNL_TIMEOUT_CONST));
+ else
+ asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
+ (u16)ITNL_TIMEOUT_CONST);
+ }
+ return 0;
+}
+
+static int asd_init_sata_pm_table_ddb(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ int ddb, i;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ for (i = 0; i < 32; i += 2)
+ asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF);
+
+ asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev,
+ SISTER_DDB, ddb);
+
+ return 0;
+}
+
+#define PM_PORT_FLAGS offsetof(struct asd_ddb_sata_pm_port, pm_port_flags)
+#define PARENT_DDB offsetof(struct asd_ddb_sata_pm_port, parent_ddb)
+
+/**
+ * asd_init_sata_pm_port_ddb -- SATA Port Multiplier Port
+ * dev: pointer to domain device
+ *
+ * For SATA Port Multiplier Ports we need to allocate one SATA Port
+ * Multiplier Port DDB and depending on whether the target on it
+ * supports SATA II NCQ, one SATA Tag DDB.
+ */
+static int asd_init_sata_pm_port_ddb(struct domain_device *dev)
+{
+ int ddb, i, parent_ddb, pmtable_ddb;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ u8 flags;
+
+ ddb = asd_get_ddb(asd_ha);
+ if (ddb < 0)
+ return ddb;
+
+ asd_set_ddb_type(dev);
+ flags = (dev->sata_dev.port_no << 4) | PM_PORT_SET;
+ asd_ddbsite_write_byte(asd_ha, ddb, PM_PORT_FLAGS, flags);
+ asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
+ asd_init_sata(dev);
+
+ parent_ddb = (int) (unsigned long) dev->parent->lldd_dev;
+ asd_ddbsite_write_word(asd_ha, ddb, PARENT_DDB, parent_ddb);
+ pmtable_ddb = asd_ddbsite_read_word(asd_ha, parent_ddb, SISTER_DDB);
+ asd_ddbsite_write_word(asd_ha, pmtable_ddb, dev->sata_dev.port_no,ddb);
+
+ if (asd_ddbsite_read_byte(asd_ha, ddb, NUM_SATA_TAGS) > 0) {
+ i = asd_init_sata_tag_ddb(dev);
+ if (i < 0) {
+ asd_free_ddb(asd_ha, ddb);
+ return i;
+ }
+ }
+ return 0;
+}
+
+static int asd_init_initiator_ddb(struct domain_device *dev)
+{
+ return -ENODEV;
+}
+
+/**
+ * asd_init_sata_pm_ddb -- SATA Port Multiplier
+ * dev: pointer to domain device
+ *
+ * For STP and direct-attached SATA Port Multipliers we need
+ * one target port DDB entry and one SATA PM table DDB entry.
+ */
+static int asd_init_sata_pm_ddb(struct domain_device *dev)
+{
+ int res = 0;
+
+ res = asd_init_target_ddb(dev);
+ if (res)
+ goto out;
+ res = asd_init_sata_pm_table_ddb(dev);
+ if (res)
+ asd_free_ddb(dev->port->ha->lldd_ha,
+ (int) (unsigned long) dev->lldd_dev);
+out:
+ return res;
+}
+
+int asd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+
+ switch (dev->dev_type) {
+ case SATA_PM:
+ res = asd_init_sata_pm_ddb(dev);
+ break;
+ case SATA_PM_PORT:
+ res = asd_init_sata_pm_port_ddb(dev);
+ break;
+ default:
+ if (dev->tproto)
+ res = asd_init_target_ddb(dev);
+ else
+ res = asd_init_initiator_ddb(dev);
+ }
+ return res;
+}
+
+void asd_dev_gone(struct domain_device *dev)
+{
+ int ddb, sister_ddb;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+
+ ddb = (int) (unsigned long) dev->lldd_dev;
+ sister_ddb = asd_ddbsite_read_word(asd_ha, ddb, SISTER_DDB);
+
+ if (sister_ddb != 0xFFFF)
+ asd_free_ddb(asd_ha, sister_ddb);
+ asd_free_ddb(asd_ha, ddb);
+ dev->lldd_dev = NULL;
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver dump interface.
+ *
+ * Copyright (C) 2004 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * 2005/07/14/LT Complete overhaul of this file. Update pages, register
+ * locations, names, etc. Make use of macros. Print more information.
+ * Print all cseq and lseq mip and mdp.
+ *
+ */
+
+#include "linux/pci.h"
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_reg_def.h"
+#include "aic94xx_sas.h"
+
+#include "aic94xx_dump.h"
+
+#ifdef ASD_DEBUG
+
+#define MD(x) (1 << (x))
+#define MODE_COMMON (1 << 31)
+#define MODE_0_7 (0xFF)
+
+static const struct lseq_cio_regs {
+ char *name;
+ u32 offs;
+ u8 width;
+ u32 mode;
+} LSEQmCIOREGS[] = {
+ {"LmMnSCBPTR", 0x20, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+ {"LmMnDDBPTR", 0x22, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) },
+ {"LmREQMBX", 0x30, 32, MODE_COMMON },
+ {"LmRSPMBX", 0x34, 32, MODE_COMMON },
+ {"LmMnINT", 0x38, 32, MODE_0_7 },
+ {"LmMnINTEN", 0x3C, 32, MODE_0_7 },
+ {"LmXMTPRIMD", 0x40, 32, MODE_COMMON },
+ {"LmXMTPRIMCS", 0x44, 8, MODE_COMMON },
+ {"LmCONSTAT", 0x45, 8, MODE_COMMON },
+ {"LmMnDMAERRS", 0x46, 8, MD(0)|MD(1) },
+ {"LmMnSGDMAERRS", 0x47, 8, MD(0)|MD(1) },
+ {"LmMnEXPHDRP", 0x48, 8, MD(0) },
+ {"LmMnSASAALIGN", 0x48, 8, MD(1) },
+ {"LmMnMSKHDRP", 0x49, 8, MD(0) },
+ {"LmMnSTPALIGN", 0x49, 8, MD(1) },
+ {"LmMnRCVHDRP", 0x4A, 8, MD(0) },
+ {"LmMnXMTHDRP", 0x4A, 8, MD(1) },
+ {"LmALIGNMODE", 0x4B, 8, MD(1) },
+ {"LmMnEXPRCVCNT", 0x4C, 32, MD(0) },
+ {"LmMnXMTCNT", 0x4C, 32, MD(1) },
+ {"LmMnCURRTAG", 0x54, 16, MD(0) },
+ {"LmMnPREVTAG", 0x56, 16, MD(0) },
+ {"LmMnACKOFS", 0x58, 8, MD(1) },
+ {"LmMnXFRLVL", 0x59, 8, MD(0)|MD(1) },
+ {"LmMnSGDMACTL", 0x5A, 8, MD(0)|MD(1) },
+ {"LmMnSGDMASTAT", 0x5B, 8, MD(0)|MD(1) },
+ {"LmMnDDMACTL", 0x5C, 8, MD(0)|MD(1) },
+ {"LmMnDDMASTAT", 0x5D, 8, MD(0)|MD(1) },
+ {"LmMnDDMAMODE", 0x5E, 16, MD(0)|MD(1) },
+ {"LmMnPIPECTL", 0x61, 8, MD(0)|MD(1) },
+ {"LmMnACTSCB", 0x62, 16, MD(0)|MD(1) },
+ {"LmMnSGBHADR", 0x64, 8, MD(0)|MD(1) },
+ {"LmMnSGBADR", 0x65, 8, MD(0)|MD(1) },
+ {"LmMnSGDCNT", 0x66, 8, MD(0)|MD(1) },
+ {"LmMnSGDMADR", 0x68, 32, MD(0)|MD(1) },
+ {"LmMnSGDMADR", 0x6C, 32, MD(0)|MD(1) },
+ {"LmMnXFRCNT", 0x70, 32, MD(0)|MD(1) },
+ {"LmMnXMTCRC", 0x74, 32, MD(1) },
+ {"LmCURRTAG", 0x74, 16, MD(0) },
+ {"LmPREVTAG", 0x76, 16, MD(0) },
+ {"LmMnDPSEL", 0x7B, 8, MD(0)|MD(1) },
+ {"LmDPTHSTAT", 0x7C, 8, MODE_COMMON },
+ {"LmMnHOLDLVL", 0x7D, 8, MD(0) },
+ {"LmMnSATAFS", 0x7E, 8, MD(1) },
+ {"LmMnCMPLTSTAT", 0x7F, 8, MD(0)|MD(1) },
+ {"LmPRMSTAT0", 0x80, 32, MODE_COMMON },
+ {"LmPRMSTAT1", 0x84, 32, MODE_COMMON },
+ {"LmGPRMINT", 0x88, 8, MODE_COMMON },
+ {"LmMnCURRSCB", 0x8A, 16, MD(0) },
+ {"LmPRMICODE", 0x8C, 32, MODE_COMMON },
+ {"LmMnRCVCNT", 0x90, 16, MD(0) },
+ {"LmMnBUFSTAT", 0x92, 16, MD(0) },
+ {"LmMnXMTHDRSIZE",0x92, 8, MD(1) },
+ {"LmMnXMTSIZE", 0x93, 8, MD(1) },
+ {"LmMnTGTXFRCNT", 0x94, 32, MD(0) },
+ {"LmMnEXPROFS", 0x98, 32, MD(0) },
+ {"LmMnXMTROFS", 0x98, 32, MD(1) },
+ {"LmMnRCVROFS", 0x9C, 32, MD(0) },
+ {"LmCONCTL", 0xA0, 16, MODE_COMMON },
+ {"LmBITLTIMER", 0xA2, 16, MODE_COMMON },
+ {"LmWWNLOW", 0xA8, 32, MODE_COMMON },
+ {"LmWWNHIGH", 0xAC, 32, MODE_COMMON },
+ {"LmMnFRMERR", 0xB0, 32, MD(0) },
+ {"LmMnFRMERREN", 0xB4, 32, MD(0) },
+ {"LmAWTIMER", 0xB8, 16, MODE_COMMON },
+ {"LmAWTCTL", 0xBA, 8, MODE_COMMON },
+ {"LmMnHDRCMPS", 0xC0, 32, MD(0) },
+ {"LmMnXMTSTAT", 0xC4, 8, MD(1) },
+ {"LmHWTSTATEN", 0xC5, 8, MODE_COMMON },
+ {"LmMnRRDYRC", 0xC6, 8, MD(0) },
+ {"LmMnRRDYTC", 0xC6, 8, MD(1) },
+ {"LmHWTSTAT", 0xC7, 8, MODE_COMMON },
+ {"LmMnDATABUFADR",0xC8, 16, MD(0)|MD(1) },
+ {"LmDWSSTATUS", 0xCB, 8, MODE_COMMON },
+ {"LmMnACTSTAT", 0xCE, 16, MD(0)|MD(1) },
+ {"LmMnREQSCB", 0xD2, 16, MD(0)|MD(1) },
+ {"LmXXXPRIM", 0xD4, 32, MODE_COMMON },
+ {"LmRCVASTAT", 0xD9, 8, MODE_COMMON },
+ {"LmINTDIS1", 0xDA, 8, MODE_COMMON },
+ {"LmPSTORESEL", 0xDB, 8, MODE_COMMON },
+ {"LmPSTORE", 0xDC, 32, MODE_COMMON },
+ {"LmPRIMSTAT0EN", 0xE0, 32, MODE_COMMON },
+ {"LmPRIMSTAT1EN", 0xE4, 32, MODE_COMMON },
+ {"LmDONETCTL", 0xF2, 16, MODE_COMMON },
+ {NULL, 0, 0, 0 }
+};
+/*
+static struct lseq_cio_regs LSEQmOOBREGS[] = {
+ {"OOB_BFLTR" ,0x100, 8, MD(5)},
+ {"OOB_INIT_MIN" ,0x102,16, MD(5)},
+ {"OOB_INIT_MAX" ,0x104,16, MD(5)},
+ {"OOB_INIT_NEG" ,0x106,16, MD(5)},
+ {"OOB_SAS_MIN" ,0x108,16, MD(5)},
+ {"OOB_SAS_MAX" ,0x10A,16, MD(5)},
+ {"OOB_SAS_NEG" ,0x10C,16, MD(5)},
+ {"OOB_WAKE_MIN" ,0x10E,16, MD(5)},
+ {"OOB_WAKE_MAX" ,0x110,16, MD(5)},
+ {"OOB_WAKE_NEG" ,0x112,16, MD(5)},
+ {"OOB_IDLE_MAX" ,0x114,16, MD(5)},
+ {"OOB_BURST_MAX" ,0x116,16, MD(5)},
+ {"OOB_XMIT_BURST" ,0x118, 8, MD(5)},
+ {"OOB_SEND_PAIRS" ,0x119, 8, MD(5)},
+ {"OOB_INIT_IDLE" ,0x11A, 8, MD(5)},
+ {"OOB_INIT_NEGO" ,0x11C, 8, MD(5)},
+ {"OOB_SAS_IDLE" ,0x11E, 8, MD(5)},
+ {"OOB_SAS_NEGO" ,0x120, 8, MD(5)},
+ {"OOB_WAKE_IDLE" ,0x122, 8, MD(5)},
+ {"OOB_WAKE_NEGO" ,0x124, 8, MD(5)},
+ {"OOB_DATA_KBITS" ,0x126, 8, MD(5)},
+ {"OOB_BURST_DATA" ,0x128,32, MD(5)},
+ {"OOB_ALIGN_0_DATA" ,0x12C,32, MD(5)},
+ {"OOB_ALIGN_1_DATA" ,0x130,32, MD(5)},
+ {"OOB_SYNC_DATA" ,0x134,32, MD(5)},
+ {"OOB_D10_2_DATA" ,0x138,32, MD(5)},
+ {"OOB_PHY_RST_CNT" ,0x13C,32, MD(5)},
+ {"OOB_SIG_GEN" ,0x140, 8, MD(5)},
+ {"OOB_XMIT" ,0x141, 8, MD(5)},
+ {"FUNCTION_MAKS" ,0x142, 8, MD(5)},
+ {"OOB_MODE" ,0x143, 8, MD(5)},
+ {"CURRENT_STATUS" ,0x144, 8, MD(5)},
+ {"SPEED_MASK" ,0x145, 8, MD(5)},
+ {"PRIM_COUNT" ,0x146, 8, MD(5)},
+ {"OOB_SIGNALS" ,0x148, 8, MD(5)},
+ {"OOB_DATA_DET" ,0x149, 8, MD(5)},
+ {"OOB_TIME_OUT" ,0x14C, 8, MD(5)},
+ {"OOB_TIMER_ENABLE" ,0x14D, 8, MD(5)},
+ {"OOB_STATUS" ,0x14E, 8, MD(5)},
+ {"HOT_PLUG_DELAY" ,0x150, 8, MD(5)},
+ {"RCD_DELAY" ,0x151, 8, MD(5)},
+ {"COMSAS_TIMER" ,0x152, 8, MD(5)},
+ {"SNTT_DELAY" ,0x153, 8, MD(5)},
+ {"SPD_CHNG_DELAY" ,0x154, 8, MD(5)},
+ {"SNLT_DELAY" ,0x155, 8, MD(5)},
+ {"SNWT_DELAY" ,0x156, 8, MD(5)},
+ {"ALIGN_DELAY" ,0x157, 8, MD(5)},
+ {"INT_ENABLE_0" ,0x158, 8, MD(5)},
+ {"INT_ENABLE_1" ,0x159, 8, MD(5)},
+ {"INT_ENABLE_2" ,0x15A, 8, MD(5)},
+ {"INT_ENABLE_3" ,0x15B, 8, MD(5)},
+ {"OOB_TEST_REG" ,0x15C, 8, MD(5)},
+ {"PHY_CONTROL_0" ,0x160, 8, MD(5)},
+ {"PHY_CONTROL_1" ,0x161, 8, MD(5)},
+ {"PHY_CONTROL_2" ,0x162, 8, MD(5)},
+ {"PHY_CONTROL_3" ,0x163, 8, MD(5)},
+ {"PHY_OOB_CAL_TX" ,0x164, 8, MD(5)},
+ {"PHY_OOB_CAL_RX" ,0x165, 8, MD(5)},
+ {"OOB_PHY_CAL_TX" ,0x166, 8, MD(5)},
+ {"OOB_PHY_CAL_RX" ,0x167, 8, MD(5)},
+ {"PHY_CONTROL_4" ,0x168, 8, MD(5)},
+ {"PHY_TEST" ,0x169, 8, MD(5)},
+ {"PHY_PWR_CTL" ,0x16A, 8, MD(5)},
+ {"PHY_PWR_DELAY" ,0x16B, 8, MD(5)},
+ {"OOB_SM_CON" ,0x16C, 8, MD(5)},
+ {"ADDR_TRAP_1" ,0x16D, 8, MD(5)},
+ {"ADDR_NEXT_1" ,0x16E, 8, MD(5)},
+ {"NEXT_ST_1" ,0x16F, 8, MD(5)},
+ {"OOB_SM_STATE" ,0x170, 8, MD(5)},
+ {"ADDR_TRAP_2" ,0x171, 8, MD(5)},
+ {"ADDR_NEXT_2" ,0x172, 8, MD(5)},
+ {"NEXT_ST_2" ,0x173, 8, MD(5)},
+ {NULL, 0, 0, 0 }
+};
+*/
+#define STR_8BIT " %30s[0x%04x]:0x%02x\n"
+#define STR_16BIT " %30s[0x%04x]:0x%04x\n"
+#define STR_32BIT " %30s[0x%04x]:0x%08x\n"
+#define STR_64BIT " %30s[0x%04x]:0x%llx\n"
+
+#define PRINT_REG_8bit(_ha, _n, _r) asd_printk(STR_8BIT, #_n, _n, \
+ asd_read_reg_byte(_ha, _r))
+#define PRINT_REG_16bit(_ha, _n, _r) asd_printk(STR_16BIT, #_n, _n, \
+ asd_read_reg_word(_ha, _r))
+#define PRINT_REG_32bit(_ha, _n, _r) asd_printk(STR_32BIT, #_n, _n, \
+ asd_read_reg_dword(_ha, _r))
+
+#define PRINT_CREG_8bit(_ha, _n) asd_printk(STR_8BIT, #_n, _n, \
+ asd_read_reg_byte(_ha, C##_n))
+#define PRINT_CREG_16bit(_ha, _n) asd_printk(STR_16BIT, #_n, _n, \
+ asd_read_reg_word(_ha, C##_n))
+#define PRINT_CREG_32bit(_ha, _n) asd_printk(STR_32BIT, #_n, _n, \
+ asd_read_reg_dword(_ha, C##_n))
+
+#define MSTR_8BIT " Mode:%02d %30s[0x%04x]:0x%02x\n"
+#define MSTR_16BIT " Mode:%02d %30s[0x%04x]:0x%04x\n"
+#define MSTR_32BIT " Mode:%02d %30s[0x%04x]:0x%08x\n"
+
+#define PRINT_MREG_8bit(_ha, _m, _n, _r) asd_printk(MSTR_8BIT, _m, #_n, _n, \
+ asd_read_reg_byte(_ha, _r))
+#define PRINT_MREG_16bit(_ha, _m, _n, _r) asd_printk(MSTR_16BIT, _m, #_n, _n, \
+ asd_read_reg_word(_ha, _r))
+#define PRINT_MREG_32bit(_ha, _m, _n, _r) asd_printk(MSTR_32BIT, _m, #_n, _n, \
+ asd_read_reg_dword(_ha, _r))
+
+/* can also be used for MD when the register is mode aware already */
+#define PRINT_MIS_byte(_ha, _n) asd_printk(STR_8BIT, #_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_byte(_ha, CSEQ_##_n))
+#define PRINT_MIS_word(_ha, _n) asd_printk(STR_16BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_word(_ha, CSEQ_##_n))
+#define PRINT_MIS_dword(_ha, _n) \
+ asd_printk(STR_32BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\
+ asd_read_reg_dword(_ha, CSEQ_##_n))
+#define PRINT_MIS_qword(_ha, _n) \
+ asd_printk(STR_64BIT, #_n,CSEQ_##_n-CMAPPEDSCR, \
+ (unsigned long long)(((u64)asd_read_reg_dword(_ha, CSEQ_##_n)) \
+ | (((u64)asd_read_reg_dword(_ha, (CSEQ_##_n)+4))<<32)))
+
+#define CMDP_REG(_n, _m) (_m*(CSEQ_PAGE_SIZE*2)+CSEQ_##_n)
+#define PRINT_CMDP_word(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+ #_n, \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 0)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 1)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 2)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 3)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 4)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 5)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 6)), \
+ asd_read_reg_word(_ha, CMDP_REG(_n, 7)))
+
+#define PRINT_CMDP_byte(_ha, _n) \
+asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \
+ #_n, \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 0)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 1)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 2)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 3)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 4)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 5)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 6)), \
+ asd_read_reg_byte(_ha, CMDP_REG(_n, 7)))
+
+static void asd_dump_cseq_state(struct asd_ha_struct *asd_ha)
+{
+ int mode;
+
+ asd_printk("CSEQ STATE\n");
+
+ asd_printk("ARP2 REGISTERS\n");
+
+ PRINT_CREG_32bit(asd_ha, ARP2CTL);
+ PRINT_CREG_32bit(asd_ha, ARP2INT);
+ PRINT_CREG_32bit(asd_ha, ARP2INTEN);
+ PRINT_CREG_8bit(asd_ha, MODEPTR);
+ PRINT_CREG_8bit(asd_ha, ALTMODE);
+ PRINT_CREG_8bit(asd_ha, FLAG);
+ PRINT_CREG_8bit(asd_ha, ARP2INTCTL);
+ PRINT_CREG_16bit(asd_ha, STACK);
+ PRINT_CREG_16bit(asd_ha, PRGMCNT);
+ PRINT_CREG_16bit(asd_ha, ACCUM);
+ PRINT_CREG_16bit(asd_ha, SINDEX);
+ PRINT_CREG_16bit(asd_ha, DINDEX);
+ PRINT_CREG_8bit(asd_ha, SINDIR);
+ PRINT_CREG_8bit(asd_ha, DINDIR);
+ PRINT_CREG_8bit(asd_ha, JUMLDIR);
+ PRINT_CREG_8bit(asd_ha, ARP2HALTCODE);
+ PRINT_CREG_16bit(asd_ha, CURRADDR);
+ PRINT_CREG_16bit(asd_ha, LASTADDR);
+ PRINT_CREG_16bit(asd_ha, NXTLADDR);
+
+ asd_printk("IOP REGISTERS\n");
+
+ PRINT_REG_32bit(asd_ha, BISTCTL1, CBISTCTL);
+ PRINT_CREG_32bit(asd_ha, MAPPEDSCR);
+
+ asd_printk("CIO REGISTERS\n");
+
+ for (mode = 0; mode < 9; mode++)
+ PRINT_MREG_16bit(asd_ha, mode, MnSCBPTR, CMnSCBPTR(mode));
+ PRINT_MREG_16bit(asd_ha, 15, MnSCBPTR, CMnSCBPTR(15));
+
+ for (mode = 0; mode < 9; mode++)
+ PRINT_MREG_16bit(asd_ha, mode, MnDDBPTR, CMnDDBPTR(mode));
+ PRINT_MREG_16bit(asd_ha, 15, MnDDBPTR, CMnDDBPTR(15));
+
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnREQMBX, CMnREQMBX(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnRSPMBX, CMnRSPMBX(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnINT, CMnINT(mode));
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_32bit(asd_ha, mode, MnINTEN, CMnINTEN(mode));
+
+ PRINT_CREG_8bit(asd_ha, SCRATCHPAGE);
+ for (mode = 0; mode < 8; mode++)
+ PRINT_MREG_8bit(asd_ha, mode, MnSCRATCHPAGE,
+ CMnSCRATCHPAGE(mode));
+
+ PRINT_REG_32bit(asd_ha, CLINKCON, CLINKCON);
+ PRINT_REG_8bit(asd_ha, CCONMSK, CCONMSK);
+ PRINT_REG_8bit(asd_ha, CCONEXIST, CCONEXIST);
+ PRINT_REG_16bit(asd_ha, CCONMODE, CCONMODE);
+ PRINT_REG_32bit(asd_ha, CTIMERCALC, CTIMERCALC);
+ PRINT_REG_8bit(asd_ha, CINTDIS, CINTDIS);
+
+ asd_printk("SCRATCH MEMORY\n");
+
+ asd_printk("MIP 4 >>>>>\n");
+ PRINT_MIS_word(asd_ha, Q_EXE_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EXE_TAIL);
+ PRINT_MIS_word(asd_ha, Q_DONE_HEAD);
+ PRINT_MIS_word(asd_ha, Q_DONE_TAIL);
+ PRINT_MIS_word(asd_ha, Q_SEND_HEAD);
+ PRINT_MIS_word(asd_ha, Q_SEND_TAIL);
+ PRINT_MIS_word(asd_ha, Q_DMA2CHIM_HEAD);
+ PRINT_MIS_word(asd_ha, Q_DMA2CHIM_TAIL);
+ PRINT_MIS_word(asd_ha, Q_COPY_HEAD);
+ PRINT_MIS_word(asd_ha, Q_COPY_TAIL);
+ PRINT_MIS_word(asd_ha, REG0);
+ PRINT_MIS_word(asd_ha, REG1);
+ PRINT_MIS_dword(asd_ha, REG2);
+ PRINT_MIS_byte(asd_ha, LINK_CTL_Q_MAP);
+ PRINT_MIS_byte(asd_ha, MAX_CSEQ_MODE);
+ PRINT_MIS_byte(asd_ha, FREE_LIST_HACK_COUNT);
+
+ asd_printk("MIP 5 >>>>\n");
+ PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_QUEUE);
+ PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_COUNT);
+ PRINT_MIS_word(asd_ha, Q_EST_NEXUS_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EST_NEXUS_TAIL);
+ PRINT_MIS_word(asd_ha, NEED_EST_NEXUS_SCB);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_HEAD);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_TAIL);
+ PRINT_MIS_byte(asd_ha, EST_NEXUS_SCB_OFFSET);
+
+ asd_printk("MIP 6 >>>>\n");
+ PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR0);
+ PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR1);
+ PRINT_MIS_word(asd_ha, INT_ROUT_SCBPTR);
+ PRINT_MIS_byte(asd_ha, INT_ROUT_MODE);
+ PRINT_MIS_byte(asd_ha, ISR_SCRATCH_FLAGS);
+ PRINT_MIS_word(asd_ha, ISR_SAVE_SINDEX);
+ PRINT_MIS_word(asd_ha, ISR_SAVE_DINDEX);
+ PRINT_MIS_word(asd_ha, Q_MONIRTT_HEAD);
+ PRINT_MIS_word(asd_ha, Q_MONIRTT_TAIL);
+ PRINT_MIS_byte(asd_ha, FREE_SCB_MASK);
+ PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_HEAD);
+ PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_TAIL);
+ PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_HEAD);
+ PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_TAIL);
+
+ asd_printk("MIP 7 >>>>\n");
+ PRINT_MIS_qword(asd_ha, EMPTY_REQ_QUEUE);
+ PRINT_MIS_qword(asd_ha, EMPTY_REQ_COUNT);
+ PRINT_MIS_word(asd_ha, Q_EMPTY_HEAD);
+ PRINT_MIS_word(asd_ha, Q_EMPTY_TAIL);
+ PRINT_MIS_word(asd_ha, NEED_EMPTY_SCB);
+ PRINT_MIS_byte(asd_ha, EMPTY_REQ_HEAD);
+ PRINT_MIS_byte(asd_ha, EMPTY_REQ_TAIL);
+ PRINT_MIS_byte(asd_ha, EMPTY_SCB_OFFSET);
+ PRINT_MIS_word(asd_ha, PRIMITIVE_DATA);
+ PRINT_MIS_dword(asd_ha, TIMEOUT_CONST);
+
+ asd_printk("MDP 0 >>>>\n");
+ asd_printk("%-20s %6s %6s %6s %6s %6s %6s %6s %6s\n",
+ "Mode: ", "0", "1", "2", "3", "4", "5", "6", "7");
+ PRINT_CMDP_word(asd_ha, LRM_SAVE_SINDEX);
+ PRINT_CMDP_word(asd_ha, LRM_SAVE_SCBPTR);
+ PRINT_CMDP_word(asd_ha, Q_LINK_HEAD);
+ PRINT_CMDP_word(asd_ha, Q_LINK_TAIL);
+ PRINT_CMDP_byte(asd_ha, LRM_SAVE_SCRPAGE);
+
+ asd_printk("MDP 0 Mode 8 >>>>\n");
+ PRINT_MIS_word(asd_ha, RET_ADDR);
+ PRINT_MIS_word(asd_ha, RET_SCBPTR);
+ PRINT_MIS_word(asd_ha, SAVE_SCBPTR);
+ PRINT_MIS_word(asd_ha, EMPTY_TRANS_CTX);
+ PRINT_MIS_word(asd_ha, RESP_LEN);
+ PRINT_MIS_word(asd_ha, TMF_SCBPTR);
+ PRINT_MIS_word(asd_ha, GLOBAL_PREV_SCB);
+ PRINT_MIS_word(asd_ha, GLOBAL_HEAD);
+ PRINT_MIS_word(asd_ha, CLEAR_LU_HEAD);
+ PRINT_MIS_byte(asd_ha, TMF_OPCODE);
+ PRINT_MIS_byte(asd_ha, SCRATCH_FLAGS);
+ PRINT_MIS_word(asd_ha, HSB_SITE);
+ PRINT_MIS_word(asd_ha, FIRST_INV_SCB_SITE);
+ PRINT_MIS_word(asd_ha, FIRST_INV_DDB_SITE);
+
+ asd_printk("MDP 1 Mode 8 >>>>\n");
+ PRINT_MIS_qword(asd_ha, LUN_TO_CLEAR);
+ PRINT_MIS_qword(asd_ha, LUN_TO_CHECK);
+
+ asd_printk("MDP 2 Mode 8 >>>>\n");
+ PRINT_MIS_qword(asd_ha, HQ_NEW_POINTER);
+ PRINT_MIS_qword(asd_ha, HQ_DONE_BASE);
+ PRINT_MIS_dword(asd_ha, HQ_DONE_POINTER);
+ PRINT_MIS_byte(asd_ha, HQ_DONE_PASS);
+}
+
+#define PRINT_LREG_8bit(_h, _lseq, _n) \
+ asd_printk(STR_8BIT, #_n, _n, asd_read_reg_byte(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_16bit(_h, _lseq, _n) \
+ asd_printk(STR_16BIT, #_n, _n, asd_read_reg_word(_h, Lm##_n(_lseq)))
+#define PRINT_LREG_32bit(_h, _lseq, _n) \
+ asd_printk(STR_32BIT, #_n, _n, asd_read_reg_dword(_h, Lm##_n(_lseq)))
+
+#define PRINT_LMIP_byte(_h, _lseq, _n) \
+ asd_printk(STR_8BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_byte(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_word(_h, _lseq, _n) \
+ asd_printk(STR_16BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_word(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_dword(_h, _lseq, _n) \
+ asd_printk(STR_32BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)))
+#define PRINT_LMIP_qword(_h, _lseq, _n) \
+ asd_printk(STR_64BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \
+ (unsigned long long)(((unsigned long long) \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq))) \
+ | (((unsigned long long) \
+ asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)+4))<<32)))
+
+static void asd_print_lseq_cio_reg(struct asd_ha_struct *asd_ha,
+ u32 lseq_cio_addr, int i)
+{
+ switch (LSEQmCIOREGS[i].width) {
+ case 8:
+ asd_printk("%20s[0x%x]: 0x%02x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_byte(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+
+ break;
+ case 16:
+ asd_printk("%20s[0x%x]: 0x%04x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_word(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+
+ break;
+ case 32:
+ asd_printk("%20s[0x%x]: 0x%08x\n", LSEQmCIOREGS[i].name,
+ LSEQmCIOREGS[i].offs,
+ asd_read_reg_dword(asd_ha, lseq_cio_addr +
+ LSEQmCIOREGS[i].offs));
+ break;
+ }
+}
+
+static void asd_dump_lseq_state(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 moffs;
+ int mode;
+
+ asd_printk("LSEQ %d STATE\n", lseq);
+
+ asd_printk("LSEQ%d: ARP2 REGISTERS\n", lseq);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2CTL);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2INT);
+ PRINT_LREG_32bit(asd_ha, lseq, ARP2INTEN);
+ PRINT_LREG_8bit(asd_ha, lseq, MODEPTR);
+ PRINT_LREG_8bit(asd_ha, lseq, ALTMODE);
+ PRINT_LREG_8bit(asd_ha, lseq, FLAG);
+ PRINT_LREG_8bit(asd_ha, lseq, ARP2INTCTL);
+ PRINT_LREG_16bit(asd_ha, lseq, STACK);
+ PRINT_LREG_16bit(asd_ha, lseq, PRGMCNT);
+ PRINT_LREG_16bit(asd_ha, lseq, ACCUM);
+ PRINT_LREG_16bit(asd_ha, lseq, SINDEX);
+ PRINT_LREG_16bit(asd_ha, lseq, DINDEX);
+ PRINT_LREG_8bit(asd_ha, lseq, SINDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, DINDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, JUMLDIR);
+ PRINT_LREG_8bit(asd_ha, lseq, ARP2HALTCODE);
+ PRINT_LREG_16bit(asd_ha, lseq, CURRADDR);
+ PRINT_LREG_16bit(asd_ha, lseq, LASTADDR);
+ PRINT_LREG_16bit(asd_ha, lseq, NXTLADDR);
+
+ asd_printk("LSEQ%d: IOP REGISTERS\n", lseq);
+
+ PRINT_LREG_32bit(asd_ha, lseq, MODECTL);
+ PRINT_LREG_32bit(asd_ha, lseq, DBGMODE);
+ PRINT_LREG_32bit(asd_ha, lseq, CONTROL);
+ PRINT_REG_32bit(asd_ha, BISTCTL0, LmBISTCTL0(lseq));
+ PRINT_REG_32bit(asd_ha, BISTCTL1, LmBISTCTL1(lseq));
+
+ asd_printk("LSEQ%d: CIO REGISTERS\n", lseq);
+ asd_printk("Mode common:\n");
+
+ for (mode = 0; mode < 8; mode++) {
+ u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+ int i;
+
+ for (i = 0; LSEQmCIOREGS[i].name; i++)
+ if (LSEQmCIOREGS[i].mode == MODE_COMMON)
+ asd_print_lseq_cio_reg(asd_ha,lseq_cio_addr,i);
+ }
+
+ asd_printk("Mode unique:\n");
+ for (mode = 0; mode < 8; mode++) {
+ u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq);
+ int i;
+
+ asd_printk("Mode %d\n", mode);
+ for (i = 0; LSEQmCIOREGS[i].name; i++) {
+ if (!(LSEQmCIOREGS[i].mode & (1 << mode)))
+ continue;
+ asd_print_lseq_cio_reg(asd_ha, lseq_cio_addr, i);
+ }
+ }
+
+ asd_printk("SCRATCH MEMORY\n");
+
+ asd_printk("LSEQ%d MIP 0 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_HEAD);
+ PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_NUMBER);
+ PRINT_LMIP_byte(asd_ha, lseq, SCRATCH_FLAGS);
+ PRINT_LMIP_qword(asd_ha, lseq, CONNECTION_STATE);
+ PRINT_LMIP_word(asd_ha, lseq, CONCTL);
+ PRINT_LMIP_byte(asd_ha, lseq, CONSTAT);
+ PRINT_LMIP_byte(asd_ha, lseq, CONNECTION_MODES);
+ PRINT_LMIP_word(asd_ha, lseq, REG1_ISR);
+ PRINT_LMIP_word(asd_ha, lseq, REG2_ISR);
+ PRINT_LMIP_word(asd_ha, lseq, REG3_ISR);
+ PRINT_LMIP_qword(asd_ha, lseq,REG0_ISR);
+
+ asd_printk("LSEQ%d MIP 1 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR0);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR1);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR2);
+ PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR3);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE0);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE1);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE2);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE3);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_BUF_AVAIL);
+ PRINT_LMIP_dword(asd_ha, lseq, TIMEOUT_CONST);
+ PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_SINDEX);
+ PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_DINDEX);
+
+ asd_printk("LSEQ%d MIP 2 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR0);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR1);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR2);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR3);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD0);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD1);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD2);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD3);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_TAIL);
+ PRINT_LMIP_byte(asd_ha, lseq, EMPTY_BUFS_AVAIL);
+
+ asd_printk("LSEQ%d MIP 3 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TMR_TOUT_CONST);
+ PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, SRST_ASSERT_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, ONE_MILLISEC_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, TEN_MS_COMINIT_TIMEOUT);
+ PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMEOUT);
+
+ for (mode = 0; mode < 3; mode++) {
+ asd_printk("LSEQ%d MDP 0 MODE %d >>>>\n", lseq, mode);
+ moffs = mode * LSEQ_MODE_SCRATCH_SIZE;
+
+ asd_printk(STR_16BIT, "RET_ADDR", 0,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "REG0_MODE", 2,
+ asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+ asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)
+ + moffs));
+ asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+ asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)
+ + moffs));
+ asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+ asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)
+ + moffs));
+ }
+
+ asd_printk("LSEQ%d MDP 0 MODE 5 >>>>\n", lseq);
+ moffs = LSEQ_MODE5_PAGE0_OFFSET;
+ asd_printk(STR_16BIT, "RET_ADDR", 0,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq) + moffs));
+ asd_printk(STR_16BIT, "REG0_MODE", 2,
+ asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq) + moffs));
+ asd_printk(STR_16BIT, "MODE_FLAGS", 4,
+ asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq) + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR2", 0x6,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq) + moffs));
+ asd_printk(STR_16BIT, "RET_ADDR1", 0x8,
+ asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq) + moffs));
+ asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB,
+ asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq) + moffs));
+ asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC,
+ asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq) + moffs));
+
+ asd_printk("LSEQ%d MDP 0 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_DDB_SITE);
+ PRINT_LMIP_word(asd_ha, lseq, EMPTY_TRANS_CTX);
+ PRINT_LMIP_word(asd_ha, lseq, RESP_LEN);
+ PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_SCB_SITE);
+ PRINT_LMIP_dword(asd_ha, lseq, INTEN_SAVE);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_FRM_LEN);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_PROTOCOL);
+ PRINT_LMIP_byte(asd_ha, lseq, RESP_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, LAST_LOADED_SGE);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVE_SCBPTR);
+
+ asd_printk("LSEQ%d MDP 0 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, Q_XMIT_HEAD);
+ PRINT_LMIP_word(asd_ha, lseq, M1_EMPTY_TRANS_CTX);
+ PRINT_LMIP_word(asd_ha, lseq, INI_CONN_TAG);
+ PRINT_LMIP_byte(asd_ha, lseq, FAILED_OPEN_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, XMIT_REQUEST_TYPE);
+ PRINT_LMIP_byte(asd_ha, lseq, M1_RESP_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, M1_LAST_LOADED_SGE);
+ PRINT_LMIP_word(asd_ha, lseq, M1_SAVE_SCBPTR);
+
+ asd_printk("LSEQ%d MDP 0 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_word(asd_ha, lseq, PORT_COUNTER);
+ PRINT_LMIP_word(asd_ha, lseq, PM_TABLE_PTR);
+ PRINT_LMIP_word(asd_ha, lseq, SATA_INTERLOCK_TMR_SAVE);
+ PRINT_LMIP_word(asd_ha, lseq, IP_BITL);
+ PRINT_LMIP_word(asd_ha, lseq, COPY_SMP_CONN_TAG);
+ PRINT_LMIP_byte(asd_ha, lseq, P0M2_OFFS1AH);
+
+ asd_printk("LSEQ%d MDP 0 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_STATUS);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_MODE);
+ PRINT_LMIP_word(asd_ha, lseq, Q_LINK_HEAD);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_ERR);
+ PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_SIGNALS);
+ PRINT_LMIP_byte(asd_ha, lseq, SAS_RESET_MODE);
+ PRINT_LMIP_byte(asd_ha, lseq, LINK_RESET_RETRY_COUNT);
+ PRINT_LMIP_byte(asd_ha, lseq, NUM_LINK_RESET_RETRIES);
+ PRINT_LMIP_word(asd_ha, lseq, OOB_INT_ENABLES);
+ PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_TIMEOUT);
+ PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_DOWN_COUNT);
+
+ asd_printk("LSEQ%d MDP 1 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR0);
+ PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR1);
+
+ asd_printk("LSEQ%d MDP 1 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR0);
+ PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR1);
+
+ asd_printk("LSEQ%d MDP 1 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, INVALID_DWORD_COUNT);
+ PRINT_LMIP_dword(asd_ha, lseq, DISPARITY_ERROR_COUNT);
+ PRINT_LMIP_dword(asd_ha, lseq, LOSS_OF_SYNC_COUNT);
+
+ asd_printk("LSEQ%d MDP 1 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, FRAME_TYPE_MASK);
+ PRINT_LMIP_dword(asd_ha, lseq, HASHED_SRC_ADDR_MASK_PRINT);
+ PRINT_LMIP_byte(asd_ha, lseq, NUM_FILL_BYTES_MASK);
+ PRINT_LMIP_word(asd_ha, lseq, TAG_MASK);
+ PRINT_LMIP_word(asd_ha, lseq, TARGET_PORT_XFER_TAG);
+ PRINT_LMIP_dword(asd_ha, lseq, DATA_OFFSET);
+
+ asd_printk("LSEQ%d MDP 2 MODE 0 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMER_TERM_TS);
+ PRINT_LMIP_byte(asd_ha, lseq, DEVICE_BITS);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_DDB);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_NUM_TAGS);
+ PRINT_LMIP_word(asd_ha, lseq, SDB_CURR_TAG);
+
+ asd_printk("LSEQ%d MDP 2 MODE 1 >>>>\n", lseq);
+ PRINT_LMIP_qword(asd_ha, lseq, TX_ID_ADDR_FRAME);
+ PRINT_LMIP_dword(asd_ha, lseq, OPEN_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, SRST_AS_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, LAST_LOADED_SG_EL);
+
+ asd_printk("LSEQ%d MDP 2 MODE 2 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, CLOSE_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, BREAK_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, DWS_RESET_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, MCTL_TIMER_TERM_TS);
+
+ asd_printk("LSEQ%d MDP 2 MODE 4/5 >>>>\n", lseq);
+ PRINT_LMIP_dword(asd_ha, lseq, COMINIT_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_ID_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMER_TERM_TS);
+ PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TIMER_TERM_TS);
+}
+
+/**
+ * asd_dump_ddb_site -- dump a CSEQ DDB site
+ * @asd_ha: pointer to host adapter structure
+ * @site_no: site number of interest
+ */
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+ if (site_no >= asd_ha->hw_prof.max_ddbs)
+ return;
+
+#define DDB_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+#define DDB2_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, site_no, \
+ offsetof(struct asd_ddb_stp_sata_target_port, __name))
+#define DDB_FIELDW(__name) \
+ asd_ddbsite_read_word(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+#define DDB_FIELDD(__name) \
+ asd_ddbsite_read_dword(asd_ha, site_no, \
+ offsetof(struct asd_ddb_ssp_smp_target_port, __name))
+
+ asd_printk("DDB: 0x%02x\n", site_no);
+ asd_printk("conn_type: 0x%02x\n", DDB_FIELDB(conn_type));
+ asd_printk("conn_rate: 0x%02x\n", DDB_FIELDB(conn_rate));
+ asd_printk("init_conn_tag: 0x%04x\n", be16_to_cpu(DDB_FIELDW(init_conn_tag)));
+ asd_printk("send_queue_head: 0x%04x\n", be16_to_cpu(DDB_FIELDW(send_queue_head)));
+ asd_printk("sq_suspended: 0x%02x\n", DDB_FIELDB(sq_suspended));
+ asd_printk("DDB Type: 0x%02x\n", DDB_FIELDB(ddb_type));
+ asd_printk("AWT Default: 0x%04x\n", DDB_FIELDW(awt_def));
+ asd_printk("compat_features: 0x%02x\n", DDB_FIELDB(compat_features));
+ asd_printk("Pathway Blocked Count: 0x%02x\n",
+ DDB_FIELDB(pathway_blocked_count));
+ asd_printk("arb_wait_time: 0x%04x\n", DDB_FIELDW(arb_wait_time));
+ asd_printk("more_compat_features: 0x%08x\n",
+ DDB_FIELDD(more_compat_features));
+ asd_printk("Conn Mask: 0x%02x\n", DDB_FIELDB(conn_mask));
+ asd_printk("flags: 0x%02x\n", DDB_FIELDB(flags));
+ asd_printk("flags2: 0x%02x\n", DDB2_FIELDB(flags2));
+ asd_printk("ExecQ Tail: 0x%04x\n",DDB_FIELDW(exec_queue_tail));
+ asd_printk("SendQ Tail: 0x%04x\n",DDB_FIELDW(send_queue_tail));
+ asd_printk("Active Task Count: 0x%04x\n",
+ DDB_FIELDW(active_task_count));
+ asd_printk("ITNL Reason: 0x%02x\n", DDB_FIELDB(itnl_reason));
+ asd_printk("ITNL Timeout Const: 0x%04x\n", DDB_FIELDW(itnl_timeout));
+ asd_printk("ITNL timestamp: 0x%08x\n", DDB_FIELDD(itnl_timestamp));
+}
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha)
+{
+#define DDB0_FIELDB(__name) \
+ asd_ddbsite_read_byte(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name))
+#define DDB0_FIELDW(__name) \
+ asd_ddbsite_read_word(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDD(__name) \
+ asd_ddbsite_read_dword(asd_ha,0 , \
+ offsetof(struct asd_ddb_seq_shared, __name))
+
+#define DDB0_FIELDA(__name, _o) \
+ asd_ddbsite_read_byte(asd_ha, 0, \
+ offsetof(struct asd_ddb_seq_shared, __name)+_o)
+
+
+ asd_printk("DDB: 0\n");
+ asd_printk("q_free_ddb_head:%04x\n", DDB0_FIELDW(q_free_ddb_head));
+ asd_printk("q_free_ddb_tail:%04x\n", DDB0_FIELDW(q_free_ddb_tail));
+ asd_printk("q_free_ddb_cnt:%04x\n", DDB0_FIELDW(q_free_ddb_cnt));
+ asd_printk("q_used_ddb_head:%04x\n", DDB0_FIELDW(q_used_ddb_head));
+ asd_printk("q_used_ddb_tail:%04x\n", DDB0_FIELDW(q_used_ddb_tail));
+ asd_printk("shared_mem_lock:%04x\n", DDB0_FIELDW(shared_mem_lock));
+ asd_printk("smp_conn_tag:%04x\n", DDB0_FIELDW(smp_conn_tag));
+ asd_printk("est_nexus_buf_cnt:%04x\n", DDB0_FIELDW(est_nexus_buf_cnt));
+ asd_printk("est_nexus_buf_thresh:%04x\n",
+ DDB0_FIELDW(est_nexus_buf_thresh));
+ asd_printk("conn_not_active:%02x\n", DDB0_FIELDB(conn_not_active));
+ asd_printk("phy_is_up:%02x\n", DDB0_FIELDB(phy_is_up));
+ asd_printk("port_map_by_links:%02x %02x %02x %02x "
+ "%02x %02x %02x %02x\n",
+ DDB0_FIELDA(port_map_by_links, 0),
+ DDB0_FIELDA(port_map_by_links, 1),
+ DDB0_FIELDA(port_map_by_links, 2),
+ DDB0_FIELDA(port_map_by_links, 3),
+ DDB0_FIELDA(port_map_by_links, 4),
+ DDB0_FIELDA(port_map_by_links, 5),
+ DDB0_FIELDA(port_map_by_links, 6),
+ DDB0_FIELDA(port_map_by_links, 7));
+}
+
+static void asd_dump_scb_site(struct asd_ha_struct *asd_ha, u16 site_no)
+{
+
+#define SCB_FIELDB(__name) \
+ asd_scbsite_read_byte(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDW(__name) \
+ asd_scbsite_read_word(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+#define SCB_FIELDD(__name) \
+ asd_scbsite_read_dword(asd_ha, site_no, sizeof(struct scb_header) \
+ + offsetof(struct initiate_ssp_task, __name))
+
+ asd_printk("Total Xfer Len: 0x%08x.\n", SCB_FIELDD(total_xfer_len));
+ asd_printk("Frame Type: 0x%02x.\n", SCB_FIELDB(ssp_frame.frame_type));
+ asd_printk("Tag: 0x%04x.\n", SCB_FIELDW(ssp_frame.tag));
+ asd_printk("Target Port Xfer Tag: 0x%04x.\n",
+ SCB_FIELDW(ssp_frame.tptt));
+ asd_printk("Data Offset: 0x%08x.\n", SCB_FIELDW(ssp_frame.data_offs));
+ asd_printk("Retry Count: 0x%02x.\n", SCB_FIELDB(retry_count));
+}
+
+/**
+ * asd_dump_scb_sites -- dump currently used CSEQ SCB sites
+ * @asd_ha: pointer to host adapter struct
+ */
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha)
+{
+ u16 site_no;
+
+ for (site_no = 0; site_no < asd_ha->hw_prof.max_scbs; site_no++) {
+ u8 opcode;
+
+ if (!SCB_SITE_VALID(site_no))
+ continue;
+
+ /* We are only interested in SCB sites currently used.
+ */
+ opcode = asd_scbsite_read_byte(asd_ha, site_no,
+ offsetof(struct scb_header,
+ opcode));
+ if (opcode == 0xFF)
+ continue;
+
+ asd_printk("\nSCB: 0x%x\n", site_no);
+ asd_dump_scb_site(asd_ha, site_no);
+ }
+}
+
+/**
+ * ads_dump_seq_state -- dump CSEQ and LSEQ states
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of LSEQs of interest
+ */
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+
+ asd_dump_cseq_state(asd_ha);
+
+ if (lseq_mask != 0)
+ for_each_sequencer(lseq_mask, lseq_mask, lseq)
+ asd_dump_lseq_state(asd_ha, lseq);
+}
+
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl)
+{
+ unsigned long flags;
+ int i;
+
+ switch ((dl->status_block[1] & 0x70) >> 3) {
+ case SAS_PROTO_STP:
+ ASD_DPRINTK("STP proto device-to-host FIS:\n");
+ break;
+ default:
+ case SAS_PROTO_SSP:
+ ASD_DPRINTK("SAS proto IDENTIFY:\n");
+ break;
+ }
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ for (i = 0; i < phy->sas_phy.frame_rcvd_size; i+=4)
+ ASD_DPRINTK("%02x: %02x %02x %02x %02x\n",
+ i,
+ phy->frame_rcvd[i],
+ phy->frame_rcvd[i+1],
+ phy->frame_rcvd[i+2],
+ phy->frame_rcvd[i+3]);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+}
+
+static inline void asd_dump_scb(struct asd_ascb *ascb, int ind)
+{
+ asd_printk("scb%d: vaddr: 0x%p, dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ind, ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+}
+
+void asd_dump_scb_list(struct asd_ascb *ascb, int num)
+{
+ int i = 0;
+
+ asd_printk("dumping %d scbs:\n", num);
+
+ asd_dump_scb(ascb, i++);
+ --num;
+
+ if (num > 0 && !list_empty(&ascb->list)) {
+ struct list_head *el;
+
+ list_for_each(el, &ascb->list) {
+ struct asd_ascb *s = list_entry(el, struct asd_ascb,
+ list);
+ asd_dump_scb(s, i++);
+ if (--num <= 0)
+ break;
+ }
+ }
+}
+
+#endif /* ASD_DEBUG */
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver dump header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_DUMP_H_
+#define _AIC94XX_DUMP_H_
+
+#ifdef ASD_DEBUG
+
+void asd_dump_ddb_0(struct asd_ha_struct *asd_ha);
+void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no);
+void asd_dump_scb_sites(struct asd_ha_struct *asd_ha);
+void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl);
+void asd_dump_scb_list(struct asd_ascb *ascb, int num);
+#else /* ASD_DEBUG */
+
+static inline void asd_dump_ddb_0(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_target_ddb(struct asd_ha_struct *asd_ha,
+ u16 site_no) { }
+static inline void asd_dump_scb_sites(struct asd_ha_struct *asd_ha) { }
+static inline void asd_dump_seq_state(struct asd_ha_struct *asd_ha,
+ u8 lseq_mask) { }
+static inline void asd_dump_frame_rcvd(struct asd_phy *phy,
+ struct done_list_struct *dl) { }
+static inline void asd_dump_scb_list(struct asd_ascb *ascb, int num) { }
+#endif /* ASD_DEBUG */
+
+#endif /* _AIC94XX_DUMP_H_ */
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver hardware interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+u32 MBAR0_SWB_SIZE;
+
+/* ---------- Initialization ---------- */
+
+static void asd_get_user_sas_addr(struct asd_ha_struct *asd_ha)
+{
+ extern char sas_addr_str[];
+ /* If the user has specified a WWN it overrides other settings
+ */
+ if (sas_addr_str[0] != '\0')
+ asd_destringify_sas_addr(asd_ha->hw_prof.sas_addr,
+ sas_addr_str);
+ else if (asd_ha->hw_prof.sas_addr[0] != 0)
+ asd_stringify_sas_addr(sas_addr_str, asd_ha->hw_prof.sas_addr);
+}
+
+static void asd_propagate_sas_addr(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ if (asd_ha->hw_prof.phy_desc[i].sas_addr[0] == 0)
+ continue;
+ /* Set a phy's address only if it has none.
+ */
+ ASD_DPRINTK("setting phy%d addr to %llx\n", i,
+ SAS_ADDR(asd_ha->hw_prof.sas_addr));
+ memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr,
+ asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+/* ---------- PHY initialization ---------- */
+
+static void asd_init_phy_identify(struct asd_phy *phy)
+{
+ phy->identify_frame = phy->id_frm_tok->vaddr;
+
+ memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
+
+ phy->identify_frame->dev_type = SAS_END_DEV;
+ if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
+ phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
+ if (phy->sas_phy.role & PHY_ROLE_TARGET)
+ phy->identify_frame->target_bits = phy->sas_phy.tproto;
+ memcpy(phy->identify_frame->sas_addr, phy->phy_desc->sas_addr,
+ SAS_ADDR_SIZE);
+ phy->identify_frame->phy_id = phy->sas_phy.id;
+}
+
+static int asd_init_phy(struct asd_phy *phy)
+{
+ struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ sas_phy->enabled = 1;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTO_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = PHY_LINKRATE_NONE;
+
+ phy->id_frm_tok = asd_alloc_coherent(asd_ha,
+ sizeof(*phy->identify_frame),
+ GFP_KERNEL);
+ if (!phy->id_frm_tok) {
+ asd_printk("no mem for IDENTIFY for phy%d\n", sas_phy->id);
+ return -ENOMEM;
+ } else
+ asd_init_phy_identify(phy);
+
+ memset(phy->frame_rcvd, 0, sizeof(phy->frame_rcvd));
+
+ return 0;
+}
+
+static int asd_init_phys(struct asd_ha_struct *asd_ha)
+{
+ u8 i;
+ u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_phy *phy = &asd_ha->phys[i];
+
+ phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
+
+ phy->sas_phy.enabled = 0;
+ phy->sas_phy.id = i;
+ phy->sas_phy.sas_addr = &phy->phy_desc->sas_addr[0];
+ phy->sas_phy.frame_rcvd = &phy->frame_rcvd[0];
+ phy->sas_phy.ha = &asd_ha->sas_ha;
+ phy->sas_phy.lldd_phy = phy;
+ }
+
+ /* Now enable and initialize only the enabled phys. */
+ for_each_phy(phy_mask, phy_mask, i) {
+ int err = asd_init_phy(&asd_ha->phys[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/* ---------- Sliding windows ---------- */
+
+static int asd_init_sw(struct asd_ha_struct *asd_ha)
+{
+ struct pci_dev *pcidev = asd_ha->pcidev;
+ int err;
+ u32 v;
+
+ /* Unlock MBARs */
+ err = pci_read_config_dword(pcidev, PCI_CONF_MBAR_KEY, &v);
+ if (err) {
+ asd_printk("couldn't access conf. space of %s\n",
+ pci_name(pcidev));
+ goto Err;
+ }
+ if (v)
+ err = pci_write_config_dword(pcidev, PCI_CONF_MBAR_KEY, v);
+ if (err) {
+ asd_printk("couldn't write to MBAR_KEY of %s\n",
+ pci_name(pcidev));
+ goto Err;
+ }
+
+ /* Set sliding windows A, B and C to point to proper internal
+ * memory regions.
+ */
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWA, REG_BASE_ADDR);
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWB,
+ REG_BASE_ADDR_CSEQCIO);
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWC, REG_BASE_ADDR_EXSI);
+ asd_ha->io_handle[0].swa_base = REG_BASE_ADDR;
+ asd_ha->io_handle[0].swb_base = REG_BASE_ADDR_CSEQCIO;
+ asd_ha->io_handle[0].swc_base = REG_BASE_ADDR_EXSI;
+ MBAR0_SWB_SIZE = asd_ha->io_handle[0].len - 0x80;
+ if (!asd_ha->iospace) {
+ /* MBAR1 will point to OCM (On Chip Memory) */
+ pci_write_config_dword(pcidev, PCI_CONF_MBAR1, OCM_BASE_ADDR);
+ asd_ha->io_handle[1].swa_base = OCM_BASE_ADDR;
+ }
+ spin_lock_init(&asd_ha->iolock);
+Err:
+ return err;
+}
+
+/* ---------- SCB initialization ---------- */
+
+/**
+ * asd_init_scbs - manually allocate the first SCB.
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This allocates the very first SCB which would be sent to the
+ * sequencer for execution. Its bus address is written to
+ * CSEQ_Q_NEW_POINTER, mode page 2, mode 8. Since the bus address of
+ * the _next_ scb to be DMA-ed to the host adapter is read from the last
+ * SCB DMA-ed to the host adapter, we have to always stay one step
+ * ahead of the sequencer and keep one SCB already allocated.
+ */
+static int asd_init_scbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int bitmap_bytes;
+
+ /* allocate the index array and bitmap */
+ asd_ha->seq.tc_index_bitmap_bits = asd_ha->hw_prof.max_scbs;
+ asd_ha->seq.tc_index_array = kzalloc(asd_ha->seq.tc_index_bitmap_bits*
+ sizeof(void *), GFP_KERNEL);
+ if (!asd_ha->seq.tc_index_array)
+ return -ENOMEM;
+
+ bitmap_bytes = (asd_ha->seq.tc_index_bitmap_bits+7)/8;
+ bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+ asd_ha->seq.tc_index_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+ if (!asd_ha->seq.tc_index_bitmap)
+ return -ENOMEM;
+
+ spin_lock_init(&seq->tc_index_lock);
+
+ seq->next_scb.size = sizeof(struct scb);
+ seq->next_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, GFP_KERNEL,
+ &seq->next_scb.dma_handle);
+ if (!seq->next_scb.vaddr) {
+ kfree(asd_ha->seq.tc_index_bitmap);
+ kfree(asd_ha->seq.tc_index_array);
+ asd_ha->seq.tc_index_bitmap = NULL;
+ asd_ha->seq.tc_index_array = NULL;
+ return -ENOMEM;
+ }
+
+ seq->pending = 0;
+ spin_lock_init(&seq->pend_q_lock);
+ INIT_LIST_HEAD(&seq->pend_q);
+
+ return 0;
+}
+
+static inline void asd_get_max_scb_ddb(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->hw_prof.max_scbs = asd_get_cmdctx_size(asd_ha)/ASD_SCB_SIZE;
+ asd_ha->hw_prof.max_ddbs = asd_get_devctx_size(asd_ha)/ASD_DDB_SIZE;
+ ASD_DPRINTK("max_scbs:%d, max_ddbs:%d\n",
+ asd_ha->hw_prof.max_scbs,
+ asd_ha->hw_prof.max_ddbs);
+}
+
+/* ---------- Done List initialization ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long);
+
+static int asd_init_dl(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->seq.actual_dl
+ = asd_alloc_coherent(asd_ha,
+ ASD_DL_SIZE * sizeof(struct done_list_struct),
+ GFP_KERNEL);
+ if (!asd_ha->seq.actual_dl)
+ return -ENOMEM;
+ asd_ha->seq.dl = asd_ha->seq.actual_dl->vaddr;
+ asd_ha->seq.dl_toggle = ASD_DEF_DL_TOGGLE;
+ asd_ha->seq.dl_next = 0;
+ tasklet_init(&asd_ha->seq.dl_tasklet, asd_dl_tasklet_handler,
+ (unsigned long) asd_ha);
+
+ return 0;
+}
+
+/* ---------- EDB and ESCB init ---------- */
+
+static int asd_alloc_edbs(struct asd_ha_struct *asd_ha, unsigned int gfp_flags)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ seq->edb_arr = kmalloc(seq->num_edbs*sizeof(*seq->edb_arr), gfp_flags);
+ if (!seq->edb_arr)
+ return -ENOMEM;
+
+ for (i = 0; i < seq->num_edbs; i++) {
+ seq->edb_arr[i] = asd_alloc_coherent(asd_ha, ASD_EDB_SIZE,
+ gfp_flags);
+ if (!seq->edb_arr[i])
+ goto Err_unroll;
+ memset(seq->edb_arr[i]->vaddr, 0, ASD_EDB_SIZE);
+ }
+
+ ASD_DPRINTK("num_edbs:%d\n", seq->num_edbs);
+
+ return 0;
+
+Err_unroll:
+ for (i-- ; i >= 0; i--)
+ asd_free_coherent(asd_ha, seq->edb_arr[i]);
+ kfree(seq->edb_arr);
+ seq->edb_arr = NULL;
+
+ return -ENOMEM;
+}
+
+static int asd_alloc_escbs(struct asd_ha_struct *asd_ha,
+ unsigned int gfp_flags)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *escb;
+ int i, escbs;
+
+ seq->escb_arr = kmalloc(seq->num_escbs*sizeof(*seq->escb_arr),
+ gfp_flags);
+ if (!seq->escb_arr)
+ return -ENOMEM;
+
+ escbs = seq->num_escbs;
+ escb = asd_ascb_alloc_list(asd_ha, &escbs, gfp_flags);
+ if (!escb) {
+ asd_printk("couldn't allocate list of escbs\n");
+ goto Err;
+ }
+ seq->num_escbs -= escbs; /* subtract what was not allocated */
+ ASD_DPRINTK("num_escbs:%d\n", seq->num_escbs);
+
+ for (i = 0; i < seq->num_escbs; i++, escb = list_entry(escb->list.next,
+ struct asd_ascb,
+ list)) {
+ seq->escb_arr[i] = escb;
+ escb->scb->header.opcode = EMPTY_SCB;
+ }
+
+ return 0;
+Err:
+ kfree(seq->escb_arr);
+ seq->escb_arr = NULL;
+ return -ENOMEM;
+
+}
+
+static void asd_assign_edbs2escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i, k, z = 0;
+
+ for (i = 0; i < seq->num_escbs; i++) {
+ struct asd_ascb *ascb = seq->escb_arr[i];
+ struct empty_scb *escb = &ascb->scb->escb;
+
+ ascb->edb_index = z;
+
+ escb->num_valid = ASD_EDBS_PER_SCB;
+
+ for (k = 0; k < ASD_EDBS_PER_SCB; k++) {
+ struct sg_el *eb = &escb->eb[k];
+ struct asd_dma_tok *edb = seq->edb_arr[z++];
+
+ memset(eb, 0, sizeof(*eb));
+ eb->bus_addr = cpu_to_le64(((u64) edb->dma_handle));
+ eb->size = cpu_to_le32(((u32) edb->size));
+ }
+ }
+}
+
+/**
+ * asd_init_escbs -- allocate and initialize empty scbs
+ * @asd_ha: pointer to host adapter structure
+ *
+ * An empty SCB has sg_elements of ASD_EDBS_PER_SCB (7) buffers.
+ * They transport sense data, etc.
+ */
+static int asd_init_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int err = 0;
+
+ /* Allocate two empty data buffers (edb) per sequencer. */
+ int edbs = 2*(1+asd_ha->hw_prof.num_phys);
+
+ seq->num_escbs = (edbs+ASD_EDBS_PER_SCB-1)/ASD_EDBS_PER_SCB;
+ seq->num_edbs = seq->num_escbs * ASD_EDBS_PER_SCB;
+
+ err = asd_alloc_edbs(asd_ha, GFP_KERNEL);
+ if (err) {
+ asd_printk("couldn't allocate edbs\n");
+ return err;
+ }
+
+ err = asd_alloc_escbs(asd_ha, GFP_KERNEL);
+ if (err) {
+ asd_printk("couldn't allocate escbs\n");
+ return err;
+ }
+
+ asd_assign_edbs2escbs(asd_ha);
+ /* In order to insure that normal SCBs do not overfill sequencer
+ * memory and leave no space for escbs (halting condition),
+ * we increment pending here by the number of escbs. However,
+ * escbs are never pending.
+ */
+ seq->pending = seq->num_escbs;
+ seq->can_queue = 1 + (asd_ha->hw_prof.max_scbs - seq->pending)/2;
+
+ return 0;
+}
+
+/* ---------- HW initialization ---------- */
+
+/**
+ * asd_chip_hardrst -- hard reset the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This takes 16 cycles and is synchronous to CFCLK, which runs
+ * at 200 MHz, so this should take at most 80 nanoseconds.
+ */
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ int count = 100;
+ u32 reg;
+
+ for (i = 0 ; i < 4 ; i++) {
+ asd_write_reg_dword(asd_ha, COMBIST, HARDRST);
+ }
+
+ do {
+ udelay(1);
+ reg = asd_read_reg_dword(asd_ha, CHIMINT);
+ if (reg & HARDRSTDET) {
+ asd_write_reg_dword(asd_ha, CHIMINT,
+ HARDRSTDET|PORRSTDET);
+ return 0;
+ }
+ } while (--count > 0);
+
+ return -ENODEV;
+}
+
+/**
+ * asd_init_chip -- initialize the chip
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Hard resets the chip, disables HA interrupts, downloads the sequnecer
+ * microcode and starts the sequencers. The caller has to explicitly
+ * enable HA interrupts with asd_enable_ints(asd_ha).
+ */
+static int asd_init_chip(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_chip_hardrst(asd_ha);
+ if (err) {
+ asd_printk("couldn't hard reset %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+
+ asd_disable_ints(asd_ha);
+
+ err = asd_init_seqs(asd_ha);
+ if (err) {
+ asd_printk("couldn't init seqs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+
+ err = asd_start_seqs(asd_ha);
+ if (err) {
+ asd_printk("coudln't start seqs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto out;
+ }
+out:
+ return err;
+}
+
+#define MAX_DEVS ((OCM_MAX_SIZE) / (ASD_DDB_SIZE))
+
+static int max_devs = 0;
+module_param_named(max_devs, max_devs, int, S_IRUGO);
+MODULE_PARM_DESC(max_devs, "\n"
+ "\tMaximum number of SAS devices to support (not LUs).\n"
+ "\tDefault: 2176, Maximum: 65663.\n");
+
+static int max_cmnds = 0;
+module_param_named(max_cmnds, max_cmnds, int, S_IRUGO);
+MODULE_PARM_DESC(max_cmnds, "\n"
+ "\tMaximum number of commands queuable.\n"
+ "\tDefault: 512, Maximum: 66047.\n");
+
+static void asd_extend_devctx_ocm(struct asd_ha_struct *asd_ha)
+{
+ unsigned long dma_addr = OCM_BASE_ADDR;
+ u32 d;
+
+ dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+ asd_write_reg_addr(asd_ha, DEVCTXBASE, (dma_addr_t) dma_addr);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d |= 4;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+ asd_ha->hw_prof.max_ddbs += MAX_DEVS;
+}
+
+static int asd_extend_devctx(struct asd_ha_struct *asd_ha)
+{
+ dma_addr_t dma_handle;
+ unsigned long dma_addr;
+ u32 d;
+ int size;
+
+ asd_extend_devctx_ocm(asd_ha);
+
+ asd_ha->hw_prof.ddb_ext = NULL;
+ if (max_devs <= asd_ha->hw_prof.max_ddbs || max_devs > 0xFFFF) {
+ max_devs = asd_ha->hw_prof.max_ddbs;
+ return 0;
+ }
+
+ size = (max_devs - asd_ha->hw_prof.max_ddbs + 1) * ASD_DDB_SIZE;
+
+ asd_ha->hw_prof.ddb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ddb_ext) {
+ asd_printk("couldn't allocate memory for %d devices\n",
+ max_devs);
+ max_devs = asd_ha->hw_prof.max_ddbs;
+ return -ENOMEM;
+ }
+ dma_handle = asd_ha->hw_prof.ddb_ext->dma_handle;
+ dma_addr = ALIGN((unsigned long) dma_handle, ASD_DDB_SIZE);
+ dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
+ dma_handle = (dma_addr_t) dma_addr;
+ asd_write_reg_addr(asd_ha, DEVCTXBASE, dma_handle);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d &= ~4;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+ asd_ha->hw_prof.max_ddbs = max_devs;
+
+ return 0;
+}
+
+static int asd_extend_cmdctx(struct asd_ha_struct *asd_ha)
+{
+ dma_addr_t dma_handle;
+ unsigned long dma_addr;
+ u32 d;
+ int size;
+
+ asd_ha->hw_prof.scb_ext = NULL;
+ if (max_cmnds <= asd_ha->hw_prof.max_scbs || max_cmnds > 0xFFFF) {
+ max_cmnds = asd_ha->hw_prof.max_scbs;
+ return 0;
+ }
+
+ size = (max_cmnds - asd_ha->hw_prof.max_scbs + 1) * ASD_SCB_SIZE;
+
+ asd_ha->hw_prof.scb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.scb_ext) {
+ asd_printk("couldn't allocate memory for %d commands\n",
+ max_cmnds);
+ max_cmnds = asd_ha->hw_prof.max_scbs;
+ return -ENOMEM;
+ }
+ dma_handle = asd_ha->hw_prof.scb_ext->dma_handle;
+ dma_addr = ALIGN((unsigned long) dma_handle, ASD_SCB_SIZE);
+ dma_addr -= asd_ha->hw_prof.max_scbs * ASD_SCB_SIZE;
+ dma_handle = (dma_addr_t) dma_addr;
+ asd_write_reg_addr(asd_ha, CMDCTXBASE, dma_handle);
+ d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
+ d &= ~1;
+ asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
+
+ asd_ha->hw_prof.max_scbs = max_cmnds;
+
+ return 0;
+}
+
+/**
+ * asd_init_ctxmem -- initialize context memory
+ * asd_ha: pointer to host adapter structure
+ *
+ * This function sets the maximum number of SCBs and
+ * DDBs which can be used by the sequencer. This is normally
+ * 512 and 128 respectively. If support for more SCBs or more DDBs
+ * is required then CMDCTXBASE, DEVCTXBASE and CTXDOMAIN are
+ * initialized here to extend context memory to point to host memory,
+ * thus allowing unlimited support for SCBs and DDBs -- only limited
+ * by host memory.
+ */
+static int asd_init_ctxmem(struct asd_ha_struct *asd_ha)
+{
+ int bitmap_bytes;
+
+ asd_get_max_scb_ddb(asd_ha);
+ asd_extend_devctx(asd_ha);
+ asd_extend_cmdctx(asd_ha);
+
+ /* The kernel wants bitmaps to be unsigned long sized. */
+ bitmap_bytes = (asd_ha->hw_prof.max_ddbs+7)/8;
+ bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
+ asd_ha->hw_prof.ddb_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ddb_bitmap)
+ return -ENOMEM;
+ spin_lock_init(&asd_ha->hw_prof.ddb_lock);
+
+ return 0;
+}
+
+int asd_init_hw(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u32 v;
+
+ err = asd_init_sw(asd_ha);
+ if (err)
+ return err;
+
+ err = pci_read_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, &v);
+ if (err) {
+ asd_printk("couldn't read PCIC_HSTPCIX_CNTRL of %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+ pci_write_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL,
+ v | SC_TMR_DIS);
+ if (err) {
+ asd_printk("couldn't disable split completion timer of %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ err = asd_read_ocm(asd_ha);
+ if (err) {
+ asd_printk("couldn't read ocm(%d)\n", err);
+ /* While suspicios, it is not an error that we
+ * couldn't read the OCM. */
+ }
+
+ err = asd_read_flash(asd_ha);
+ if (err) {
+ asd_printk("couldn't read flash(%d)\n", err);
+ /* While suspicios, it is not an error that we
+ * couldn't read FLASH memory.
+ */
+ }
+
+ asd_init_ctxmem(asd_ha);
+
+ asd_get_user_sas_addr(asd_ha);
+ if (!asd_ha->hw_prof.sas_addr[0]) {
+ asd_printk("No SAS Address provided for %s\n",
+ pci_name(asd_ha->pcidev));
+ err = -ENODEV;
+ goto Out;
+ }
+
+ asd_propagate_sas_addr(asd_ha);
+
+ err = asd_init_phys(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize phys for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Out;
+ }
+
+ err = asd_init_scbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize scbs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Out;
+ }
+
+ err = asd_init_dl(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize the done list:%d\n",
+ err);
+ goto Out;
+ }
+
+ err = asd_init_escbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't initialize escbs\n");
+ goto Out;
+ }
+
+ err = asd_init_chip(asd_ha);
+ if (err) {
+ asd_printk("couldn't init the chip\n");
+ goto Out;
+ }
+Out:
+ return err;
+}
+
+/* ---------- Chip reset ---------- */
+
+/**
+ * asd_chip_reset -- reset the host adapter, etc
+ * @asd_ha: pointer to host adapter structure of interest
+ *
+ * Called from the ISR. Hard reset the chip. Let everything
+ * timeout. This should be no different than hot-unplugging the
+ * host adapter. Once everything times out we'll init the chip with
+ * a call to asd_init_chip() and enable interrupts with asd_enable_ints().
+ * XXX finish.
+ */
+static void asd_chip_reset(struct asd_ha_struct *asd_ha)
+{
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+
+ ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev));
+ asd_chip_hardrst(asd_ha);
+ sas_ha->notify_ha_event(sas_ha, HAE_RESET);
+}
+
+/* ---------- Done List Routines ---------- */
+
+static void asd_dl_tasklet_handler(unsigned long data)
+{
+ struct asd_ha_struct *asd_ha = (struct asd_ha_struct *) data;
+ struct asd_seq_data *seq = &asd_ha->seq;
+ unsigned long flags;
+
+ while (1) {
+ struct done_list_struct *dl = &seq->dl[seq->dl_next];
+ struct asd_ascb *ascb;
+
+ if ((dl->toggle & DL_TOGGLE_MASK) != seq->dl_toggle)
+ break;
+
+ /* find the aSCB */
+ spin_lock_irqsave(&seq->tc_index_lock, flags);
+ ascb = asd_tc_index_find(seq, (int)le16_to_cpu(dl->index));
+ spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+ if (unlikely(!ascb)) {
+ ASD_DPRINTK("BUG:sequencer:dl:no ascb?!\n");
+ goto next_1;
+ } else if (ascb->scb->header.opcode == EMPTY_SCB) {
+ goto out;
+ } else if (!ascb->uldd_timer && !del_timer(&ascb->timer)) {
+ goto next_1;
+ }
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ list_del_init(&ascb->list);
+ seq->pending--;
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+ out:
+ ascb->tasklet_complete(ascb, dl);
+
+ next_1:
+ seq->dl_next = (seq->dl_next + 1) & (ASD_DL_SIZE-1);
+ if (!seq->dl_next)
+ seq->dl_toggle ^= DL_TOGGLE_MASK;
+ }
+}
+
+/* ---------- Interrupt Service Routines ---------- */
+
+/**
+ * asd_process_donelist_isr -- schedule processing of done list entries
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_process_donelist_isr(struct asd_ha_struct *asd_ha)
+{
+ tasklet_schedule(&asd_ha->seq.dl_tasklet);
+}
+
+/**
+ * asd_com_sas_isr -- process device communication interrupt (COMINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_com_sas_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 comstat = asd_read_reg_dword(asd_ha, COMSTAT);
+
+ /* clear COMSTAT int */
+ asd_write_reg_dword(asd_ha, COMSTAT, 0xFFFFFFFF);
+
+ if (comstat & CSBUFPERR) {
+ asd_printk("%s: command/status buffer dma parity error\n",
+ pci_name(asd_ha->pcidev));
+ } else if (comstat & CSERR) {
+ int i;
+ u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+ dmaerr &= 0xFF;
+ asd_printk("%s: command/status dma error, DMAERR: 0x%02x, "
+ "CSDMAADR: 0x%04x, CSDMAADR+4: 0x%04x\n",
+ pci_name(asd_ha->pcidev),
+ dmaerr,
+ asd_read_reg_dword(asd_ha, CSDMAADR),
+ asd_read_reg_dword(asd_ha, CSDMAADR+4));
+ asd_printk("CSBUFFER:\n");
+ for (i = 0; i < 8; i++) {
+ asd_printk("%08x %08x %08x %08x\n",
+ asd_read_reg_dword(asd_ha, CSBUFFER),
+ asd_read_reg_dword(asd_ha, CSBUFFER+4),
+ asd_read_reg_dword(asd_ha, CSBUFFER+8),
+ asd_read_reg_dword(asd_ha, CSBUFFER+12));
+ }
+ asd_dump_seq_state(asd_ha, 0);
+ } else if (comstat & OVLYERR) {
+ u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
+ dmaerr = (dmaerr >> 8) & 0xFF;
+ asd_printk("%s: overlay dma error:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ dmaerr);
+ }
+ asd_chip_reset(asd_ha);
+}
+
+static inline void asd_arp2_err(struct asd_ha_struct *asd_ha, u32 dchstatus)
+{
+ static const char *halt_code[256] = {
+ "UNEXPECTED_INTERRUPT0",
+ "UNEXPECTED_INTERRUPT1",
+ "UNEXPECTED_INTERRUPT2",
+ "UNEXPECTED_INTERRUPT3",
+ "UNEXPECTED_INTERRUPT4",
+ "UNEXPECTED_INTERRUPT5",
+ "UNEXPECTED_INTERRUPT6",
+ "UNEXPECTED_INTERRUPT7",
+ "UNEXPECTED_INTERRUPT8",
+ "UNEXPECTED_INTERRUPT9",
+ "UNEXPECTED_INTERRUPT10",
+ [11 ... 19] = "unknown[11,19]",
+ "NO_FREE_SCB_AVAILABLE",
+ "INVALID_SCB_OPCODE",
+ "INVALID_MBX_OPCODE",
+ "INVALID_ATA_STATE",
+ "ATA_QUEUE_FULL",
+ "ATA_TAG_TABLE_FAULT",
+ "ATA_TAG_MASK_FAULT",
+ "BAD_LINK_QUEUE_STATE",
+ "DMA2CHIM_QUEUE_ERROR",
+ "EMPTY_SCB_LIST_FULL",
+ "unknown[30]",
+ "IN_USE_SCB_ON_FREE_LIST",
+ "BAD_OPEN_WAIT_STATE",
+ "INVALID_STP_AFFILIATION",
+ "unknown[34]",
+ "EXEC_QUEUE_ERROR",
+ "TOO_MANY_EMPTIES_NEEDED",
+ "EMPTY_REQ_QUEUE_ERROR",
+ "Q_MONIRTT_MGMT_ERROR",
+ "TARGET_MODE_FLOW_ERROR",
+ "DEVICE_QUEUE_NOT_FOUND",
+ "START_IRTT_TIMER_ERROR",
+ "ABORT_TASK_ILLEGAL_REQ",
+ [43 ... 255] = "unknown[43,255]"
+ };
+
+ if (dchstatus & CSEQINT) {
+ u32 arp2int = asd_read_reg_dword(asd_ha, CARP2INT);
+
+ if (arp2int & (ARP2WAITTO|ARP2ILLOPC|ARP2PERR|ARP2CIOPERR)) {
+ asd_printk("%s: CSEQ arp2int:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ arp2int);
+ } else if (arp2int & ARP2HALTC)
+ asd_printk("%s: CSEQ halted: %s\n",
+ pci_name(asd_ha->pcidev),
+ halt_code[(arp2int>>16)&0xFF]);
+ else
+ asd_printk("%s: CARP2INT:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ arp2int);
+ }
+ if (dchstatus & LSEQINT_MASK) {
+ int lseq;
+ u8 lseq_mask = dchstatus & LSEQINT_MASK;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ u32 arp2int = asd_read_reg_dword(asd_ha,
+ LmARP2INT(lseq));
+ if (arp2int & (ARP2WAITTO | ARP2ILLOPC | ARP2PERR
+ | ARP2CIOPERR)) {
+ asd_printk("%s: LSEQ%d arp2int:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ lseq, arp2int);
+ /* XXX we should only do lseq reset */
+ } else if (arp2int & ARP2HALTC)
+ asd_printk("%s: LSEQ%d halted: %s\n",
+ pci_name(asd_ha->pcidev),
+ lseq,halt_code[(arp2int>>16)&0xFF]);
+ else
+ asd_printk("%s: LSEQ%d ARP2INT:0x%x\n",
+ pci_name(asd_ha->pcidev), lseq,
+ arp2int);
+ }
+ }
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_dch_sas_isr -- process device channel interrupt (DEVINT)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_dch_sas_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 dchstatus = asd_read_reg_dword(asd_ha, DCHSTATUS);
+
+ if (dchstatus & CFIFTOERR) {
+ asd_printk("%s: CFIFTOERR\n", pci_name(asd_ha->pcidev));
+ asd_chip_reset(asd_ha);
+ } else
+ asd_arp2_err(asd_ha, dchstatus);
+}
+
+/**
+ * ads_rbi_exsi_isr -- process external system interface interrupt (INITERR)
+ * @asd_ha: pointer to host adapter structure
+ */
+static inline void asd_rbi_exsi_isr(struct asd_ha_struct *asd_ha)
+{
+ u32 stat0r = asd_read_reg_dword(asd_ha, ASISTAT0R);
+
+ if (!(stat0r & ASIERR)) {
+ asd_printk("hmm, EXSI interrupted but no error?\n");
+ return;
+ }
+
+ if (stat0r & ASIFMTERR) {
+ asd_printk("ASI SEEPROM format error for %s\n",
+ pci_name(asd_ha->pcidev));
+ } else if (stat0r & ASISEECHKERR) {
+ u32 stat1r = asd_read_reg_dword(asd_ha, ASISTAT1R);
+ asd_printk("ASI SEEPROM checksum 0x%x error for %s\n",
+ stat1r & CHECKSUM_MASK,
+ pci_name(asd_ha->pcidev));
+ } else {
+ u32 statr = asd_read_reg_dword(asd_ha, ASIERRSTATR);
+
+ if (!(statr & CPI2ASIMSTERR_MASK)) {
+ ASD_DPRINTK("hmm, ASIERR?\n");
+ return;
+ } else {
+ u32 addr = asd_read_reg_dword(asd_ha, ASIERRADDR);
+ u32 data = asd_read_reg_dword(asd_ha, ASIERRDATAR);
+
+ asd_printk("%s: CPI2 xfer err: addr: 0x%x, wdata: 0x%x, "
+ "count: 0x%x, byteen: 0x%x, targerr: 0x%x "
+ "master id: 0x%x, master err: 0x%x\n",
+ pci_name(asd_ha->pcidev),
+ addr, data,
+ (statr & CPI2ASIBYTECNT_MASK) >> 16,
+ (statr & CPI2ASIBYTEEN_MASK) >> 12,
+ (statr & CPI2ASITARGERR_MASK) >> 8,
+ (statr & CPI2ASITARGMID_MASK) >> 4,
+ (statr & CPI2ASIMSTERR_MASK));
+ }
+ }
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hst_pcix_isr -- process host interface interrupts
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Asserted on PCIX errors: target abort, etc.
+ */
+static inline void asd_hst_pcix_isr(struct asd_ha_struct *asd_ha)
+{
+ u16 status;
+ u32 pcix_status;
+ u32 ecc_status;
+
+ pci_read_config_word(asd_ha->pcidev, PCI_STATUS, &status);
+ pci_read_config_dword(asd_ha->pcidev, PCIX_STATUS, &pcix_status);
+ pci_read_config_dword(asd_ha->pcidev, ECC_CTRL_STAT, &ecc_status);
+
+ if (status & PCI_STATUS_DETECTED_PARITY)
+ asd_printk("parity error for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_REC_MASTER_ABORT)
+ asd_printk("master abort for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_REC_TARGET_ABORT)
+ asd_printk("target abort for %s\n", pci_name(asd_ha->pcidev));
+ else if (status & PCI_STATUS_PARITY)
+ asd_printk("data parity for %s\n", pci_name(asd_ha->pcidev));
+ else if (pcix_status & RCV_SCE) {
+ asd_printk("received split completion error for %s\n",
+ pci_name(asd_ha->pcidev));
+ pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+ /* XXX: Abort task? */
+ return;
+ } else if (pcix_status & UNEXP_SC) {
+ asd_printk("unexpected split completion for %s\n",
+ pci_name(asd_ha->pcidev));
+ pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
+ /* ignore */
+ return;
+ } else if (pcix_status & SC_DISCARD)
+ asd_printk("split completion discarded for %s\n",
+ pci_name(asd_ha->pcidev));
+ else if (ecc_status & UNCOR_ECCERR)
+ asd_printk("uncorrectable ECC error for %s\n",
+ pci_name(asd_ha->pcidev));
+ asd_chip_reset(asd_ha);
+}
+
+/**
+ * asd_hw_isr -- host adapter interrupt service routine
+ * @irq: ignored
+ * @dev_id: pointer to host adapter structure
+ * @regs: ignored
+ *
+ * The ISR processes done list entries and level 3 error handling.
+ */
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct asd_ha_struct *asd_ha = dev_id;
+ u32 chimint = asd_read_reg_dword(asd_ha, CHIMINT);
+
+ if (!chimint)
+ return IRQ_NONE;
+
+ asd_write_reg_dword(asd_ha, CHIMINT, chimint);
+ (void) asd_read_reg_dword(asd_ha, CHIMINT);
+
+ if (chimint & DLAVAIL)
+ asd_process_donelist_isr(asd_ha);
+ if (chimint & COMINT)
+ asd_com_sas_isr(asd_ha);
+ if (chimint & DEVINT)
+ asd_dch_sas_isr(asd_ha);
+ if (chimint & INITERR)
+ asd_rbi_exsi_isr(asd_ha);
+ if (chimint & HOSTERR)
+ asd_hst_pcix_isr(asd_ha);
+
+ return IRQ_HANDLED;
+}
+
+/* ---------- SCB handling ---------- */
+
+static inline struct asd_ascb *asd_ascb_alloc(struct asd_ha_struct *asd_ha,
+ unsigned int gfp_flags)
+{
+ extern kmem_cache_t *asd_ascb_cache;
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *ascb;
+ unsigned long flags;
+
+ ascb = kmem_cache_alloc(asd_ascb_cache, gfp_flags);
+
+ if (ascb) {
+ memset(ascb, 0, sizeof(*ascb));
+ ascb->dma_scb.size = sizeof(struct scb);
+ ascb->dma_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool,
+ gfp_flags,
+ &ascb->dma_scb.dma_handle);
+ if (!ascb->dma_scb.vaddr) {
+ kmem_cache_free(asd_ascb_cache, ascb);
+ return NULL;
+ }
+ memset(ascb->dma_scb.vaddr, 0, sizeof(struct scb));
+ asd_init_ascb(asd_ha, ascb);
+
+ spin_lock_irqsave(&seq->tc_index_lock, flags);
+ ascb->tc_index = asd_tc_index_get(seq, ascb);
+ spin_unlock_irqrestore(&seq->tc_index_lock, flags);
+ if (ascb->tc_index == -1)
+ goto undo;
+
+ ascb->scb->header.index = cpu_to_le16((u16)ascb->tc_index);
+ }
+
+ return ascb;
+undo:
+ dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+ ascb->dma_scb.dma_handle);
+ kmem_cache_free(asd_ascb_cache, ascb);
+ ASD_DPRINTK("no index for ascb\n");
+ return NULL;
+}
+
+/**
+ * asd_ascb_alloc_list -- allocate a list of aSCBs
+ * @asd_ha: pointer to host adapter structure
+ * @num: pointer to integer number of aSCBs
+ * @gfp_flags: GFP_ flags.
+ *
+ * This is the only function which is used to allocate aSCBs.
+ * It can allocate one or many. If more than one, then they form
+ * a linked list in two ways: by their list field of the ascb struct
+ * and by the next_scb field of the scb_header.
+ *
+ * Returns NULL if no memory was available, else pointer to a list
+ * of ascbs. When this function returns, @num would be the number
+ * of SCBs which were not able to be allocated, 0 if all requested
+ * were able to be allocated.
+ */
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+ *asd_ha, int *num,
+ unsigned int gfp_flags)
+{
+ struct asd_ascb *first = NULL;
+
+ for ( ; *num > 0; --*num) {
+ struct asd_ascb *ascb = asd_ascb_alloc(asd_ha, gfp_flags);
+
+ if (!ascb)
+ break;
+ else if (!first)
+ first = ascb;
+ else {
+ struct asd_ascb *last = list_entry(first->list.prev,
+ struct asd_ascb,
+ list);
+ list_add_tail(&ascb->list, &first->list);
+ last->scb->header.next_scb =
+ cpu_to_le64(((u64)ascb->dma_scb.dma_handle));
+ }
+ }
+
+ return first;
+}
+
+/**
+ * asd_swap_head_scb -- swap the head scb
+ * @asd_ha: pointer to host adapter structure
+ * @ascb: pointer to the head of an ascb list
+ *
+ * The sequencer knows the DMA address of the next SCB to be DMAed to
+ * the host adapter, from initialization or from the last list DMAed.
+ * seq->next_scb keeps the address of this SCB. The sequencer will
+ * DMA to the host adapter this list of SCBs. But the head (first
+ * element) of this list is not known to the sequencer. Here we swap
+ * the head of the list with the known SCB (memcpy()).
+ * Only one memcpy() is required per list so it is in our interest
+ * to keep the list of SCB as long as possible so that the ratio
+ * of number of memcpy calls to the number of SCB DMA-ed is as small
+ * as possible.
+ *
+ * LOCKING: called with the pending list lock held.
+ */
+static inline void asd_swap_head_scb(struct asd_ha_struct *asd_ha,
+ struct asd_ascb *ascb)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ struct asd_ascb *last = list_entry(ascb->list.prev,
+ struct asd_ascb,
+ list);
+ struct asd_dma_tok t = ascb->dma_scb;
+
+ memcpy(seq->next_scb.vaddr, ascb->scb, sizeof(*ascb->scb));
+ ascb->dma_scb = seq->next_scb;
+ ascb->scb = ascb->dma_scb.vaddr;
+ seq->next_scb = t;
+ last->scb->header.next_scb =
+ cpu_to_le64(((u64)seq->next_scb.dma_handle));
+}
+
+/**
+ * asd_start_timers -- (add and) start timers of SCBs
+ * @list: pointer to struct list_head of the scbs
+ * @to: timeout in jiffies
+ *
+ * If an SCB in the @list has no timer function, assign the default
+ * one, then start the timer of the SCB. This function is
+ * intended to be called from asd_post_ascb_list(), just prior to
+ * posting the SCBs to the sequencer.
+ */
+static inline void asd_start_scb_timers(struct list_head *list)
+{
+ struct asd_ascb *ascb;
+ list_for_each_entry(ascb, list, list) {
+ if (!ascb->uldd_timer) {
+ ascb->timer.data = (unsigned long) ascb;
+ ascb->timer.function = asd_ascb_timedout;
+ ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+ add_timer(&ascb->timer);
+ }
+ }
+}
+
+/**
+ * asd_post_ascb_list -- post a list of 1 or more aSCBs to the host adapter
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first aSCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * See queueing comment in asd_post_escb_list().
+ *
+ * Additional note on queuing: In order to minimize the ratio of memcpy()
+ * to the number of ascbs sent, we try to batch-send as many ascbs as possible
+ * in one go.
+ * Two cases are possible:
+ * A) can_queue >= num,
+ * B) can_queue < num.
+ * Case A: we can send the whole batch at once. Increment "pending"
+ * in the beginning of this function, when it is checked, in order to
+ * eliminate races when this function is called by multiple processes.
+ * Case B: should never happen if the managing layer considers
+ * lldd_queue_size.
+ */
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num)
+{
+ unsigned long flags;
+ LIST_HEAD(list);
+ int can_queue;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ can_queue = asd_ha->hw_prof.max_scbs - asd_ha->seq.pending;
+ if (can_queue >= num)
+ asd_ha->seq.pending += num;
+ else
+ can_queue = 0;
+
+ if (!can_queue) {
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+ asd_printk("%s: scb queue full\n", pci_name(asd_ha->pcidev));
+ return -SAS_QUEUE_FULL;
+ }
+
+ asd_swap_head_scb(asd_ha, ascb);
+
+ __list_add(&list, ascb->list.prev, &ascb->list);
+
+ asd_start_scb_timers(&list);
+
+ asd_ha->seq.scbpro += num;
+ list_splice_init(&list, asd_ha->seq.pend_q.prev);
+ asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return 0;
+}
+
+/**
+ * asd_post_escb_list -- post a list of 1 or more empty scb
+ * @asd_ha: pointer to a host adapter structure
+ * @ascb: pointer to the first empty SCB in the list
+ * @num: number of aSCBs in the list (to be posted)
+ *
+ * This is essentially the same as asd_post_ascb_list, but we do not
+ * increment pending, add those to the pending list or get indexes.
+ * See asd_init_escbs() and asd_init_post_escbs().
+ *
+ * Since sending a list of ascbs is a superset of sending a single
+ * ascb, this function exists to generalize this. More specifically,
+ * when sending a list of those, we want to do only a _single_
+ * memcpy() at swap head, as opposed to for each ascb sent (in the
+ * case of sending them one by one). That is, we want to minimize the
+ * ratio of memcpy() operations to the number of ascbs sent. The same
+ * logic applies to asd_post_ascb_list().
+ */
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_swap_head_scb(asd_ha, ascb);
+ asd_ha->seq.scbpro += num;
+ asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return 0;
+}
+
+/* ---------- LED ---------- */
+
+/**
+ * asd_turn_led -- turn on/off an LED
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: the PHY id whose LED we want to manupulate
+ * @op: 1 to turn on, 0 to turn off
+ */
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+ if (phy_id < ASD_MAX_PHYS) {
+ u32 v = asd_read_reg_dword(asd_ha, LmCONTROL(phy_id));
+ if (op)
+ v |= LEDPOL;
+ else
+ v &= ~LEDPOL;
+ asd_write_reg_dword(asd_ha, LmCONTROL(phy_id), v);
+ }
+}
+
+/**
+ * asd_control_led -- enable/disable an LED on the board
+ * @asd_ha: pointer to host adapter structure
+ * @phy_id: integer, the phy id
+ * @op: integer, 1 to enable, 0 to disable the LED
+ *
+ * First we output enable the LED, then we set the source
+ * to be an external module.
+ */
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
+{
+ if (phy_id < ASD_MAX_PHYS) {
+ u32 v;
+
+ v = asd_read_reg_dword(asd_ha, GPIOOER);
+ if (op)
+ v |= (1 << phy_id);
+ else
+ v &= ~(1 << phy_id);
+ asd_write_reg_dword(asd_ha, GPIOOER, v);
+
+ v = asd_read_reg_dword(asd_ha, GPIOCNFGR);
+ if (op)
+ v |= (1 << phy_id);
+ else
+ v &= ~(1 << phy_id);
+ asd_write_reg_dword(asd_ha, GPIOCNFGR, v);
+ }
+}
+
+/* ---------- PHY enable ---------- */
+
+static int asd_enable_phy(struct asd_ha_struct *asd_ha, int phy_id)
+{
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, INT_ENABLE_2), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, HOT_PLUG_DELAY),
+ HOTPLUG_DELAY_TIMEOUT);
+
+ /* Get defaults from manuf. sector */
+ /* XXX we need defaults for those in case MS is broken. */
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_0),
+ phy->phy_desc->phy_control_0);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_1),
+ phy->phy_desc->phy_control_1);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_2),
+ phy->phy_desc->phy_control_2);
+ asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_3),
+ phy->phy_desc->phy_control_3);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(phy_id),
+ ASD_COMINIT_TIMEOUT);
+
+ asd_write_reg_addr(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(phy_id),
+ phy->id_frm_tok->dma_handle);
+
+ asd_control_led(asd_ha, phy_id, 1);
+
+ return 0;
+}
+
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
+{
+ u8 phy_m;
+ u8 i;
+ int num = 0, k;
+ struct asd_ascb *ascb;
+ struct asd_ascb *ascb_list;
+
+ if (!phy_mask) {
+ asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__);
+ return 0;
+ }
+
+ for_each_phy(phy_mask, phy_m, i) {
+ num++;
+ asd_enable_phy(asd_ha, i);
+ }
+
+ k = num;
+ ascb_list = asd_ascb_alloc_list(asd_ha, &k, GFP_KERNEL);
+ if (!ascb_list) {
+ asd_printk("no memory for control phy ascb list\n");
+ return -ENOMEM;
+ }
+ num -= k;
+
+ ascb = ascb_list;
+ for_each_phy(phy_mask, phy_m, i) {
+ asd_build_control_phy(ascb, i, ENABLE_PHY);
+ ascb = list_entry(ascb->list.next, struct asd_ascb, list);
+ }
+ ASD_DPRINTK("posting %d control phy scbs\n", num);
+ k = asd_post_ascb_list(asd_ha, ascb_list, num);
+ if (k)
+ asd_ascb_free_list(ascb_list);
+
+ return k;
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_HWI_H_
+#define _AIC94XX_HWI_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+
+#include <scsi/libsas.h>
+
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+
+/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */
+#define ASD_MAX_PHYS 8
+#define ASD_PCBA_SN_SIZE 12
+
+/* Those are to be further named properly, the "RAZORx" part, and
+ * subsequently included in include/linux/pci_ids.h.
+ */
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E
+#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3F 0x43F
+
+struct asd_ha_addrspace {
+ void __iomem *addr;
+ unsigned long start; /* pci resource start */
+ unsigned long len; /* pci resource len */
+ unsigned long flags; /* pci resource flags */
+
+ /* addresses internal to the host adapter */
+ u32 swa_base; /* mmspace 1 (MBAR1) uses this only */
+ u32 swb_base;
+ u32 swc_base;
+};
+
+struct bios_struct {
+ int present;
+ u8 maj;
+ u8 min;
+ u32 bld;
+};
+
+struct unit_element_struct {
+ u16 num;
+ u16 size;
+ void *area;
+};
+
+struct flash_struct {
+ u32 bar;
+ int present;
+ int wide;
+ u8 manuf;
+ u8 dev_id;
+ u8 sec_prot;
+
+ u32 dir_offs;
+};
+
+struct asd_phy_desc {
+ /* From CTRL-A settings, then set to what is appropriate */
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 max_sas_lrate;
+ u8 min_sas_lrate;
+ u8 max_sata_lrate;
+ u8 min_sata_lrate;
+ u8 flags;
+#define ASD_CRC_DIS 1
+#define ASD_SATA_SPINUP_HOLD 2
+
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+};
+
+struct asd_dma_tok {
+ void *vaddr;
+ dma_addr_t dma_handle;
+ size_t size;
+};
+
+struct hw_profile {
+ struct bios_struct bios;
+ struct unit_element_struct ue;
+ struct flash_struct flash;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ char pcba_sn[ASD_PCBA_SN_SIZE+1];
+
+ u8 enabled_phys; /* mask of enabled phys */
+ struct asd_phy_desc phy_desc[ASD_MAX_PHYS];
+ u32 max_scbs; /* absolute sequencer scb queue size */
+ struct asd_dma_tok *scb_ext;
+ u32 max_ddbs;
+ struct asd_dma_tok *ddb_ext;
+
+ spinlock_t ddb_lock;
+ void *ddb_bitmap;
+
+ int num_phys; /* ENABLEABLE */
+ int max_phys; /* REPORTED + ENABLEABLE */
+
+ unsigned addr_range; /* max # of addrs; max # of possible ports */
+ unsigned port_name_base;
+ unsigned dev_name_base;
+ unsigned sata_name_base;
+};
+
+struct asd_ascb {
+ struct list_head list;
+ struct asd_ha_struct *ha;
+
+ struct scb *scb; /* equals dma_scb->vaddr */
+ struct asd_dma_tok dma_scb;
+ struct asd_dma_tok *sg_arr;
+
+ void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *);
+ u8 uldd_timer:1;
+
+ /* internally generated command */
+ struct timer_list timer;
+ struct completion completion;
+ u8 tag_valid:1;
+ __be16 tag; /* error recovery only */
+
+ /* If this is an Empty SCB, index of first edb in seq->edb_arr. */
+ int edb_index;
+
+ /* Used by the timer timeout function. */
+ int tc_index;
+
+ void *uldd_task;
+};
+
+#define ASD_DL_SIZE_BITS 0x8
+#define ASD_DL_SIZE (1<<(2+ASD_DL_SIZE_BITS))
+#define ASD_DEF_DL_TOGGLE 0x01
+
+struct asd_seq_data {
+ spinlock_t pend_q_lock;
+ u16 scbpro;
+ int pending;
+ struct list_head pend_q;
+ int can_queue; /* per adapter */
+ struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */
+
+ spinlock_t tc_index_lock;
+ void **tc_index_array;
+ void *tc_index_bitmap;
+ int tc_index_bitmap_bits;
+
+ struct tasklet_struct dl_tasklet;
+ struct done_list_struct *dl; /* array of done list entries, equals */
+ struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */
+ int dl_toggle;
+ int dl_next;
+
+ int num_edbs;
+ struct asd_dma_tok **edb_arr;
+ int num_escbs;
+ struct asd_ascb **escb_arr; /* array of pointers to escbs */
+};
+
+/* This is the Host Adapter structure. It describes the hardware
+ * SAS adapter.
+ */
+struct asd_ha_struct {
+ struct pci_dev *pcidev;
+ const char *name;
+
+ struct sas_ha_struct sas_ha;
+
+ u8 revision_id;
+
+ int iospace;
+ spinlock_t iolock;
+ struct asd_ha_addrspace io_handle[2];
+
+ struct hw_profile hw_prof;
+
+ struct asd_phy phys[ASD_MAX_PHYS];
+ struct asd_sas_port ports[ASD_MAX_PHYS];
+
+ struct dma_pool *scb_pool;
+
+ struct asd_seq_data seq; /* sequencer related */
+};
+
+/* ---------- Common macros ---------- */
+
+#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle))
+#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8) \
+ ? ((u32)((__dma_handle) >> 32)) \
+ : ((u32)0))
+
+#define dev_to_asd_ha(__dev) pci_get_drvdata(to_pci_dev(__dev))
+#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF \
+ && ((__site_no) & 0xF0FF) > 0x001F)
+/* For each bit set in __lseq_mask, set __lseq to equal the bit
+ * position of the set bit and execute the statement following.
+ * __mc is the temporary mask, used as a mask "counter".
+ */
+#define for_each_sequencer(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+#define for_each_phy(__lseq_mask, __mc, __lseq) \
+ for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\
+ if (((__mc) & 1))
+
+#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I)))
+
+/* ---------- DMA allocs ---------- */
+
+static inline struct asd_dma_tok *asd_dmatok_alloc(unsigned int flags)
+{
+ return kmem_cache_alloc(asd_dma_token_cache, flags);
+}
+
+static inline void asd_dmatok_free(struct asd_dma_tok *token)
+{
+ kmem_cache_free(asd_dma_token_cache, token);
+}
+
+static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct *
+ asd_ha, size_t size,
+ unsigned int flags)
+{
+ struct asd_dma_tok *token = asd_dmatok_alloc(flags);
+ if (token) {
+ token->size = size;
+ token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev,
+ token->size,
+ &token->dma_handle,
+ flags);
+ if (!token->vaddr) {
+ asd_dmatok_free(token);
+ token = NULL;
+ }
+ }
+ return token;
+}
+
+static inline void asd_free_coherent(struct asd_ha_struct *asd_ha,
+ struct asd_dma_tok *token)
+{
+ if (token) {
+ dma_free_coherent(&asd_ha->pcidev->dev, token->size,
+ token->vaddr, token->dma_handle);
+ asd_dmatok_free(token);
+ }
+}
+
+static inline void asd_init_ascb(struct asd_ha_struct *asd_ha,
+ struct asd_ascb *ascb)
+{
+ INIT_LIST_HEAD(&ascb->list);
+ ascb->scb = ascb->dma_scb.vaddr;
+ ascb->ha = asd_ha;
+ ascb->timer.function = NULL;
+ init_timer(&ascb->timer);
+ ascb->tc_index = -1;
+ init_completion(&ascb->completion);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void asd_tc_index_release(struct asd_seq_data *seq, int index)
+{
+ seq->tc_index_array[index] = NULL;
+ clear_bit(index, seq->tc_index_bitmap);
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr)
+{
+ int index;
+
+ index = find_first_zero_bit(seq->tc_index_bitmap,
+ seq->tc_index_bitmap_bits);
+ if (index == seq->tc_index_bitmap_bits)
+ return -1;
+
+ seq->tc_index_array[index] = ptr;
+ set_bit(index, seq->tc_index_bitmap);
+
+ return index;
+}
+
+/* Must be called with the tc_index_lock held!
+ */
+static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index)
+{
+ return seq->tc_index_array[index];
+}
+
+/**
+ * asd_ascb_free -- free a single aSCB after is has completed
+ * @ascb: pointer to the aSCB of interest
+ *
+ * This frees an aSCB after it has been executed/completed by
+ * the sequencer.
+ */
+static inline void asd_ascb_free(struct asd_ascb *ascb)
+{
+ if (ascb) {
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ unsigned long flags;
+
+ BUG_ON(!list_empty(&ascb->list));
+ spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags);
+ asd_tc_index_release(&ascb->ha->seq, ascb->tc_index);
+ spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags);
+ dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
+ ascb->dma_scb.dma_handle);
+ kmem_cache_free(asd_ascb_cache, ascb);
+ }
+}
+
+/**
+ * asd_ascb_list_free -- free a list of ascbs
+ * @ascb_list: a list of ascbs
+ *
+ * This function will free a list of ascbs allocated by asd_ascb_alloc_list.
+ * It is used when say the scb queueing function returned QUEUE_FULL,
+ * and we do not need the ascbs any more.
+ */
+static inline void asd_ascb_free_list(struct asd_ascb *ascb_list)
+{
+ LIST_HEAD(list);
+ struct list_head *n, *pos;
+
+ __list_add(&list, ascb_list->list.prev, &ascb_list->list);
+ list_for_each_safe(pos, n, &list) {
+ list_del_init(pos);
+ asd_ascb_free(list_entry(pos, struct asd_ascb, list));
+ }
+}
+
+/* ---------- Function declarations ---------- */
+
+int asd_init_hw(struct asd_ha_struct *asd_ha);
+irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs);
+
+
+struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
+ *asd_ha, int *num,
+ unsigned int gfp_mask);
+
+int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
+ int num);
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha);
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc);
+void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op);
+int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask);
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+ u8 subfunc);
+
+void asd_ascb_timedout(unsigned long data);
+int asd_chip_hardrst(struct asd_ha_struct *asd_ha);
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver initialization.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+/* The format is "version.release.patchlevel" */
+#define ASD_DRIVER_VERSION "1.0.2"
+
+static int use_msi = 0;
+module_param_named(use_msi, use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "\n"
+ "\tEnable(1) or disable(0) using PCI MSI.\n"
+ "\tDefault: 0");
+
+static int lldd_max_execute_num = 0;
+module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
+MODULE_PARM_DESC(collector, "\n"
+ "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
+ "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
+ "\tThe aic94xx SAS LLDD supports both modes.\n"
+ "\tDefault: 0 (Direct Mode).\n");
+
+char sas_addr_str[2*SAS_ADDR_SIZE + 1] = "";
+
+static struct scsi_transport_template *aic94xx_transport_template;
+
+static struct scsi_host_template aic94xx_sht = {
+ .module = THIS_MODULE,
+ /* .name is initialized */
+ .name = "aic94xx",
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+ struct asd_ha_addrspace *io_handle;
+
+ asd_ha->iospace = 0;
+ for (i = 0; i < 3; i += 2) {
+ io_handle = &asd_ha->io_handle[i==0?0:1];
+ io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+ io_handle->len = pci_resource_len(asd_ha->pcidev, i);
+ io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+ err = -ENODEV;
+ if (!io_handle->start || !io_handle->len) {
+ asd_printk("MBAR%d start or length for %s is 0.\n",
+ i==0?0:1, pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+ if (err) {
+ asd_printk("couldn't reserve memory region for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ if (io_handle->flags & IORESOURCE_CACHEABLE)
+ io_handle->addr = ioremap(io_handle->start,
+ io_handle->len);
+ else
+ io_handle->addr = ioremap_nocache(io_handle->start,
+ io_handle->len);
+ if (!io_handle->addr) {
+ asd_printk("couldn't map MBAR%d of %s\n", i==0?0:1,
+ pci_name(asd_ha->pcidev));
+ goto Err_unreq;
+ }
+ }
+
+ return 0;
+Err_unreq:
+ pci_release_region(asd_ha->pcidev, i);
+Err:
+ if (i > 0) {
+ io_handle = &asd_ha->io_handle[0];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 0);
+ }
+ return err;
+}
+
+static void __devexit asd_unmap_memio(struct asd_ha_struct *asd_ha)
+{
+ struct asd_ha_addrspace *io_handle;
+
+ io_handle = &asd_ha->io_handle[1];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 2);
+
+ io_handle = &asd_ha->io_handle[0];
+ iounmap(io_handle->addr);
+ pci_release_region(asd_ha->pcidev, 0);
+}
+
+static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha)
+{
+ int i = PCI_IOBAR_OFFSET, err;
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];
+
+ asd_ha->iospace = 1;
+ io_handle->start = pci_resource_start(asd_ha->pcidev, i);
+ io_handle->len = pci_resource_len(asd_ha->pcidev, i);
+ io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
+ io_handle->addr = (void __iomem *) io_handle->start;
+ if (!io_handle->start || !io_handle->len) {
+ asd_printk("couldn't get IO ports for %s\n",
+ pci_name(asd_ha->pcidev));
+ return -ENODEV;
+ }
+ err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
+ if (err) {
+ asd_printk("couldn't reserve io space for %s\n",
+ pci_name(asd_ha->pcidev));
+ }
+
+ return err;
+}
+
+static void __devexit asd_unmap_ioport(struct asd_ha_struct *asd_ha)
+{
+ pci_release_region(asd_ha->pcidev, PCI_IOBAR_OFFSET);
+}
+
+static int __devinit asd_map_ha(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u16 cmd_reg;
+
+ err = pci_read_config_word(asd_ha->pcidev, PCI_COMMAND, &cmd_reg);
+ if (err) {
+ asd_printk("couldn't read command register of %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+
+ err = -ENODEV;
+ if (cmd_reg & PCI_COMMAND_MEMORY) {
+ if ((err = asd_map_memio(asd_ha)))
+ goto Err;
+ } else if (cmd_reg & PCI_COMMAND_IO) {
+ if ((err = asd_map_ioport(asd_ha)))
+ goto Err;
+ asd_printk("%s ioport mapped -- upgrade your hardware\n",
+ pci_name(asd_ha->pcidev));
+ } else {
+ asd_printk("no proper device access to %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+
+ return 0;
+Err:
+ return err;
+}
+
+static void __devexit asd_unmap_ha(struct asd_ha_struct *asd_ha)
+{
+ if (asd_ha->iospace)
+ asd_unmap_ioport(asd_ha);
+ else
+ asd_unmap_memio(asd_ha);
+}
+
+static const char *asd_dev_rev[30] = {
+ [0] = "A0",
+ [1] = "A1",
+ [8] = "B0",
+};
+
+static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+
+ err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
+ &asd_ha->revision_id);
+ if (err) {
+ asd_printk("couldn't read REVISION ID register of %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err;
+ }
+ err = -ENODEV;
+ if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
+ asd_printk("%s is revision %s (%X), which is not supported\n",
+ pci_name(asd_ha->pcidev),
+ asd_dev_rev[asd_ha->revision_id],
+ asd_ha->revision_id);
+ goto Err;
+ }
+ /* Provide some sane default values. */
+ asd_ha->hw_prof.max_scbs = 512;
+ asd_ha->hw_prof.max_ddbs = 128;
+ asd_ha->hw_prof.num_phys = ASD_MAX_PHYS;
+ /* All phys are enabled, by default. */
+ asd_ha->hw_prof.enabled_phys = 0xFF;
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate = PHY_LINKRATE_3;
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate = PHY_LINKRATE_1_5;
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate= PHY_LINKRATE_1_5;
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate= PHY_LINKRATE_1_5;
+ }
+
+ return 0;
+Err:
+ return err;
+}
+
+static int __devinit asd_aic9410_setup(struct asd_ha_struct *asd_ha)
+{
+ int err = asd_common_setup(asd_ha);
+
+ if (err)
+ return err;
+
+ asd_ha->hw_prof.addr_range = 8;
+ asd_ha->hw_prof.port_name_base = 0;
+ asd_ha->hw_prof.dev_name_base = 8;
+ asd_ha->hw_prof.sata_name_base = 16;
+
+ return 0;
+}
+
+static int __devinit asd_aic9405_setup(struct asd_ha_struct *asd_ha)
+{
+ int err = asd_common_setup(asd_ha);
+
+ if (err)
+ return err;
+
+ asd_ha->hw_prof.addr_range = 4;
+ asd_ha->hw_prof.port_name_base = 0;
+ asd_ha->hw_prof.dev_name_base = 4;
+ asd_ha->hw_prof.sata_name_base = 8;
+
+ return 0;
+}
+
+static ssize_t asd_show_dev_rev(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ asd_dev_rev[asd_ha->revision_id]);
+}
+static DEVICE_ATTR(revision, S_IRUGO, asd_show_dev_rev, NULL);
+
+static ssize_t asd_show_dev_bios_build(struct device *dev,
+ struct device_attribute *attr,char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", asd_ha->hw_prof.bios.bld);
+}
+static DEVICE_ATTR(bios_build, S_IRUGO, asd_show_dev_bios_build, NULL);
+
+static ssize_t asd_show_dev_pcba_sn(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev);
+ return snprintf(buf, PAGE_SIZE, "%s\n", asd_ha->hw_prof.pcba_sn);
+}
+static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL);
+
+static void asd_create_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+ device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha)
+{
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision);
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build);
+ device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn);
+}
+
+/* The first entry, 0, is used for dynamic ids, the rest for devices
+ * we know about.
+ */
+static struct asd_pcidev_struct {
+ const char * name;
+ int (*setup)(struct asd_ha_struct *asd_ha);
+} asd_pcidev_data[] = {
+ /* Id 0 is used for dynamic ids. */
+ { .name = "Adaptec AIC-94xx SAS/SATA Host Adapter",
+ .setup = asd_aic9410_setup
+ },
+ { .name = "Adaptec AIC-9410W SAS/SATA Host Adapter",
+ .setup = asd_aic9410_setup
+ },
+ { .name = "Adaptec AIC-9405W SAS/SATA Host Adapter",
+ .setup = asd_aic9405_setup
+ },
+};
+
+static inline int asd_create_ha_caches(struct asd_ha_struct *asd_ha)
+{
+ asd_ha->scb_pool = dma_pool_create(ASD_DRIVER_NAME "_scb_pool",
+ &asd_ha->pcidev->dev,
+ sizeof(struct scb),
+ 8, 0);
+ if (!asd_ha->scb_pool) {
+ asd_printk("couldn't create scb pool\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * asd_free_edbs -- free empty data buffers
+ * asd_ha: pointer to host adapter structure
+ */
+static inline void asd_free_edbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_edbs; i++)
+ asd_free_coherent(asd_ha, seq->edb_arr[i]);
+ kfree(seq->edb_arr);
+ seq->edb_arr = NULL;
+}
+
+static inline void asd_free_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_escbs; i++) {
+ if (!list_empty(&seq->escb_arr[i]->list))
+ list_del_init(&seq->escb_arr[i]->list);
+
+ asd_ascb_free(seq->escb_arr[i]);
+ }
+ kfree(seq->escb_arr);
+ seq->escb_arr = NULL;
+}
+
+static inline void asd_destroy_ha_caches(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ if (asd_ha->hw_prof.ddb_ext)
+ asd_free_coherent(asd_ha, asd_ha->hw_prof.ddb_ext);
+ if (asd_ha->hw_prof.scb_ext)
+ asd_free_coherent(asd_ha, asd_ha->hw_prof.scb_ext);
+
+ if (asd_ha->hw_prof.ddb_bitmap)
+ kfree(asd_ha->hw_prof.ddb_bitmap);
+ asd_ha->hw_prof.ddb_bitmap = NULL;
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_phy *phy = &asd_ha->phys[i];
+
+ asd_free_coherent(asd_ha, phy->id_frm_tok);
+ }
+ if (asd_ha->seq.escb_arr)
+ asd_free_escbs(asd_ha);
+ if (asd_ha->seq.edb_arr)
+ asd_free_edbs(asd_ha);
+ if (asd_ha->hw_prof.ue.area) {
+ kfree(asd_ha->hw_prof.ue.area);
+ asd_ha->hw_prof.ue.area = NULL;
+ }
+ if (asd_ha->seq.tc_index_array) {
+ kfree(asd_ha->seq.tc_index_array);
+ kfree(asd_ha->seq.tc_index_bitmap);
+ asd_ha->seq.tc_index_array = NULL;
+ asd_ha->seq.tc_index_bitmap = NULL;
+ }
+ if (asd_ha->seq.actual_dl) {
+ asd_free_coherent(asd_ha, asd_ha->seq.actual_dl);
+ asd_ha->seq.actual_dl = NULL;
+ asd_ha->seq.dl = NULL;
+ }
+ if (asd_ha->seq.next_scb.vaddr) {
+ dma_pool_free(asd_ha->scb_pool, asd_ha->seq.next_scb.vaddr,
+ asd_ha->seq.next_scb.dma_handle);
+ asd_ha->seq.next_scb.vaddr = NULL;
+ }
+ dma_pool_destroy(asd_ha->scb_pool);
+ asd_ha->scb_pool = NULL;
+}
+
+kmem_cache_t *asd_dma_token_cache;
+kmem_cache_t *asd_ascb_cache;
+
+static int asd_create_global_caches(void)
+{
+ if (!asd_dma_token_cache) {
+ asd_dma_token_cache
+ = kmem_cache_create(ASD_DRIVER_NAME "_dma_token",
+ sizeof(struct asd_dma_tok),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (!asd_dma_token_cache) {
+ asd_printk("couldn't create dma token cache\n");
+ return -ENOMEM;
+ }
+ }
+
+ if (!asd_ascb_cache) {
+ asd_ascb_cache = kmem_cache_create(ASD_DRIVER_NAME "_ascb",
+ sizeof(struct asd_ascb),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (!asd_ascb_cache) {
+ asd_printk("couldn't create ascb cache\n");
+ goto Err;
+ }
+ }
+
+ return 0;
+Err:
+ kmem_cache_destroy(asd_dma_token_cache);
+ asd_dma_token_cache = NULL;
+ return -ENOMEM;
+}
+
+static void asd_destroy_global_caches(void)
+{
+ if (asd_dma_token_cache)
+ kmem_cache_destroy(asd_dma_token_cache);
+ asd_dma_token_cache = NULL;
+
+ if (asd_ascb_cache)
+ kmem_cache_destroy(asd_ascb_cache);
+ asd_ascb_cache = NULL;
+}
+
+static int asd_register_sas_ha(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ struct asd_sas_phy **sas_phys =
+ kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_phy), GFP_KERNEL);
+ struct asd_sas_port **sas_ports =
+ kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_port), GFP_KERNEL);
+
+ if (!sas_phys || !sas_ports) {
+ kfree(sas_phys);
+ kfree(sas_ports);
+ return -ENOMEM;
+ }
+
+ asd_ha->sas_ha.sas_ha_name = (char *) asd_ha->name;
+ asd_ha->sas_ha.lldd_module = THIS_MODULE;
+ asd_ha->sas_ha.sas_addr = &asd_ha->hw_prof.sas_addr[0];
+
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ sas_phys[i] = &asd_ha->phys[i].sas_phy;
+ sas_ports[i] = &asd_ha->ports[i];
+ }
+
+ asd_ha->sas_ha.sas_phy = sas_phys;
+ asd_ha->sas_ha.sas_port= sas_ports;
+ asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
+
+ asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
+
+ return sas_register_ha(&asd_ha->sas_ha);
+}
+
+static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = sas_unregister_ha(&asd_ha->sas_ha);
+
+ sas_remove_host(asd_ha->sas_ha.core.shost);
+ scsi_remove_host(asd_ha->sas_ha.core.shost);
+ scsi_host_put(asd_ha->sas_ha.core.shost);
+
+ kfree(asd_ha->sas_ha.sas_phy);
+ kfree(asd_ha->sas_ha.sas_port);
+
+ return err;
+}
+
+static int __devinit asd_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct asd_pcidev_struct *asd_dev;
+ unsigned asd_id = (unsigned) id->driver_data;
+ struct asd_ha_struct *asd_ha;
+ struct Scsi_Host *shost;
+ int err;
+
+ if (asd_id >= ARRAY_SIZE(asd_pcidev_data)) {
+ asd_printk("wrong driver_data in PCI table\n");
+ return -ENODEV;
+ }
+
+ if ((err = pci_enable_device(dev))) {
+ asd_printk("couldn't enable device %s\n", pci_name(dev));
+ return err;
+ }
+
+ pci_set_master(dev);
+
+ err = -ENOMEM;
+
+ shost = scsi_host_alloc(&aic94xx_sht, sizeof(void *));
+ if (!shost)
+ goto Err;
+
+ asd_dev = &asd_pcidev_data[asd_id];
+
+ asd_ha = kzalloc(sizeof(*asd_ha), GFP_KERNEL);
+ if (!asd_ha) {
+ asd_printk("out of memory\n");
+ goto Err;
+ }
+ asd_ha->pcidev = dev;
+ asd_ha->sas_ha.pcidev = asd_ha->pcidev;
+ asd_ha->sas_ha.lldd_ha = asd_ha;
+
+ asd_ha->name = asd_dev->name;
+ asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev));
+
+ SHOST_TO_SAS_HA(shost) = &asd_ha->sas_ha;
+ asd_ha->sas_ha.core.shost = shost;
+ shost->transportt = aic94xx_transport_template;
+ shost->max_id = ~0;
+ shost->max_lun = ~0;
+ shost->max_cmd_len = 16;
+
+ err = scsi_add_host(shost, &dev->dev);
+ if (err) {
+ scsi_host_put(shost);
+ goto Err_free;
+ }
+
+
+
+ err = asd_dev->setup(asd_ha);
+ if (err)
+ goto Err_free;
+
+ err = -ENODEV;
+ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)
+ && !pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK))
+ ;
+ else if (!pci_set_dma_mask(dev, DMA_32BIT_MASK)
+ && !pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK))
+ ;
+ else {
+ asd_printk("no suitable DMA mask for %s\n", pci_name(dev));
+ goto Err_free;
+ }
+
+ pci_set_drvdata(dev, asd_ha);
+
+ err = asd_map_ha(asd_ha);
+ if (err)
+ goto Err_free;
+
+ err = asd_create_ha_caches(asd_ha);
+ if (err)
+ goto Err_unmap;
+
+ err = asd_init_hw(asd_ha);
+ if (err)
+ goto Err_free_cache;
+
+ asd_printk("device %s: SAS addr %llx, PCBA SN %s, %d phys, %d enabled "
+ "phys, flash %s, BIOS %s%d\n",
+ pci_name(dev), SAS_ADDR(asd_ha->hw_prof.sas_addr),
+ asd_ha->hw_prof.pcba_sn, asd_ha->hw_prof.max_phys,
+ asd_ha->hw_prof.num_phys,
+ asd_ha->hw_prof.flash.present ? "present" : "not present",
+ asd_ha->hw_prof.bios.present ? "build " : "not present",
+ asd_ha->hw_prof.bios.bld);
+
+ if (use_msi)
+ pci_enable_msi(asd_ha->pcidev);
+
+ err = request_irq(asd_ha->pcidev->irq, asd_hw_isr, SA_SHIRQ,
+ ASD_DRIVER_NAME, asd_ha);
+ if (err) {
+ asd_printk("couldn't get irq %d for %s\n",
+ asd_ha->pcidev->irq, pci_name(asd_ha->pcidev));
+ goto Err_irq;
+ }
+ asd_enable_ints(asd_ha);
+
+ err = asd_init_post_escbs(asd_ha);
+ if (err) {
+ asd_printk("couldn't post escbs for %s\n",
+ pci_name(asd_ha->pcidev));
+ goto Err_escbs;
+ }
+ ASD_DPRINTK("escbs posted\n");
+
+ asd_create_dev_attrs(asd_ha);
+
+ err = asd_register_sas_ha(asd_ha);
+ if (err)
+ goto Err_reg_sas;
+
+ err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys);
+ if (err) {
+ asd_printk("coudln't enable phys, err:%d\n", err);
+ goto Err_en_phys;
+ }
+ ASD_DPRINTK("enabled phys\n");
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ ssleep(1);
+ /* Wait for discovery to finish */
+ scsi_flush_work(asd_ha->sas_ha.core.shost);
+
+ return 0;
+Err_en_phys:
+ asd_unregister_sas_ha(asd_ha);
+Err_reg_sas:
+ asd_remove_dev_attrs(asd_ha);
+Err_escbs:
+ asd_disable_ints(asd_ha);
+ free_irq(dev->irq, asd_ha);
+Err_irq:
+ if (use_msi)
+ pci_disable_msi(dev);
+ asd_chip_hardrst(asd_ha);
+Err_free_cache:
+ asd_destroy_ha_caches(asd_ha);
+Err_unmap:
+ asd_unmap_ha(asd_ha);
+Err_free:
+ kfree(asd_ha);
+ scsi_remove_host(shost);
+Err:
+ pci_disable_device(dev);
+ return err;
+}
+
+static void asd_free_queues(struct asd_ha_struct *asd_ha)
+{
+ unsigned long flags;
+ LIST_HEAD(pending);
+ struct list_head *n, *pos;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_ha->seq.pending = 0;
+ list_splice_init(&asd_ha->seq.pend_q, &pending);
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ if (!list_empty(&pending))
+ ASD_DPRINTK("Uh-oh! Pending is not empty!\n");
+
+ list_for_each_safe(pos, n, &pending) {
+ struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list);
+ list_del_init(pos);
+ ASD_DPRINTK("freeing from pending\n");
+ asd_ascb_free(ascb);
+ }
+}
+
+static void asd_turn_off_leds(struct asd_ha_struct *asd_ha)
+{
+ u8 phy_mask = asd_ha->hw_prof.enabled_phys;
+ u8 i;
+
+ for_each_phy(phy_mask, phy_mask, i) {
+ asd_turn_led(asd_ha, i, 0);
+ asd_control_led(asd_ha, i, 0);
+ }
+}
+
+static void __devexit asd_pci_remove(struct pci_dev *dev)
+{
+ struct asd_ha_struct *asd_ha = pci_get_drvdata(dev);
+
+ if (!asd_ha)
+ return;
+
+ asd_unregister_sas_ha(asd_ha);
+
+ asd_disable_ints(asd_ha);
+
+ asd_remove_dev_attrs(asd_ha);
+
+ /* XXX more here as needed */
+
+ free_irq(dev->irq, asd_ha);
+ if (use_msi)
+ pci_disable_msi(asd_ha->pcidev);
+ asd_turn_off_leds(asd_ha);
+ asd_chip_hardrst(asd_ha);
+ asd_free_queues(asd_ha);
+ asd_destroy_ha_caches(asd_ha);
+ asd_unmap_ha(asd_ha);
+ kfree(asd_ha);
+ pci_disable_device(dev);
+ return;
+}
+
+static ssize_t asd_version_show(struct device_driver *driver, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION);
+}
+static DRIVER_ATTR(version, S_IRUGO, asd_version_show, NULL);
+
+static void asd_create_driver_attrs(struct device_driver *driver)
+{
+ driver_create_file(driver, &driver_attr_version);
+}
+
+static void asd_remove_driver_attrs(struct device_driver *driver)
+{
+ driver_remove_file(driver, &driver_attr_version);
+}
+
+static struct sas_domain_function_template aic94xx_transport_functions = {
+ .lldd_port_formed = asd_update_port_links,
+
+ .lldd_dev_found = asd_dev_found,
+ .lldd_dev_gone = asd_dev_gone,
+
+ .lldd_execute_task = asd_execute_task,
+
+ .lldd_abort_task = asd_abort_task,
+ .lldd_abort_task_set = asd_abort_task_set,
+ .lldd_clear_aca = asd_clear_aca,
+ .lldd_clear_task_set = asd_clear_task_set,
+ .lldd_I_T_nexus_reset = NULL,
+ .lldd_lu_reset = asd_lu_reset,
+ .lldd_query_task = asd_query_task,
+
+ .lldd_clear_nexus_port = asd_clear_nexus_port,
+ .lldd_clear_nexus_ha = asd_clear_nexus_ha,
+
+ .lldd_control_phy = asd_control_phy,
+};
+
+static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR10),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR12),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E),
+ 0, 0, 1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR30),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR32),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3E),
+ 0, 0, 2},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3F),
+ 0, 0, 2},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, aic94xx_pci_table);
+
+static struct pci_driver aic94xx_pci_driver = {
+ .name = ASD_DRIVER_NAME,
+ .id_table = aic94xx_pci_table,
+ .probe = asd_pci_probe,
+ .remove = __devexit_p(asd_pci_remove),
+};
+
+static int __init aic94xx_init(void)
+{
+ int err;
+
+
+ asd_printk("%s version %s loaded\n", ASD_DRIVER_DESCRIPTION,
+ ASD_DRIVER_VERSION);
+
+ err = asd_create_global_caches();
+ if (err)
+ return err;
+
+ aic94xx_transport_template =
+ sas_domain_attach_transport(&aic94xx_transport_functions);
+ if (err)
+ goto out_destroy_caches;
+
+ err = pci_register_driver(&aic94xx_pci_driver);
+ if (err)
+ goto out_release_transport;
+
+ asd_create_driver_attrs(&aic94xx_pci_driver.driver);
+
+ return err;
+
+ out_release_transport:
+ sas_release_transport(aic94xx_transport_template);
+ out_destroy_caches:
+ asd_destroy_global_caches();
+
+ return err;
+}
+
+static void __exit aic94xx_exit(void)
+{
+ asd_remove_driver_attrs(&aic94xx_pci_driver.driver);
+ pci_unregister_driver(&aic94xx_pci_driver);
+ sas_release_transport(aic94xx_transport_template);
+ asd_destroy_global_caches();
+ asd_printk("%s version %s unloaded\n", ASD_DRIVER_DESCRIPTION,
+ ASD_DRIVER_VERSION);
+}
+
+module_init(aic94xx_init);
+module_exit(aic94xx_exit);
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION(ASD_DRIVER_DESCRIPTION);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(ASD_DRIVER_VERSION);
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver register access.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include "aic94xx_reg.h"
+#include "aic94xx.h"
+
+/* Writing to device address space.
+ * Offset comes before value to remind that the operation of
+ * this function is *offs = val.
+ */
+static inline void asd_write_byte(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u8 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outb(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writeb(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+static inline void asd_write_word(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u16 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outw(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writew(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+static inline void asd_write_dword(struct asd_ha_struct *asd_ha,
+ unsigned long offs, u32 val)
+{
+ if (unlikely(asd_ha->iospace))
+ outl(val,
+ (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+ else
+ writel(val, asd_ha->io_handle[0].addr + offs);
+ wmb();
+}
+
+/* Reading from device address space.
+ */
+static inline u8 asd_read_byte(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u8 val;
+ if (unlikely(asd_ha->iospace))
+ val = inb((unsigned long) asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readb(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u16 asd_read_word(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u16 val;
+ if (unlikely(asd_ha->iospace))
+ val = inw((unsigned long)asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readw(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u32 asd_read_dword(struct asd_ha_struct *asd_ha,
+ unsigned long offs)
+{
+ u32 val;
+ if (unlikely(asd_ha->iospace))
+ val = inl((unsigned long) asd_ha->io_handle[0].addr
+ + (offs & 0xFF));
+ else
+ val = readl(asd_ha->io_handle[0].addr + offs);
+ rmb();
+ return val;
+}
+
+static inline u32 asd_mem_offs_swa(void)
+{
+ return 0;
+}
+
+static inline u32 asd_mem_offs_swc(void)
+{
+ return asd_mem_offs_swa() + MBAR0_SWA_SIZE;
+}
+
+static inline u32 asd_mem_offs_swb(void)
+{
+ return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20;
+}
+
+/* We know that the register wanted is in the range
+ * of the sliding window.
+ */
+#define ASD_READ_SW(ww, type, ord) \
+static inline type asd_read_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+ u32 reg) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
+ u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+ return asd_read_##ord (asd_ha, (unsigned long) map_offs); \
+}
+
+#define ASD_WRITE_SW(ww, type, ord) \
+static inline void asd_write_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+ u32 reg, type val) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \
+ u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+ asd_write_##ord (asd_ha, (unsigned long) map_offs, val); \
+}
+
+ASD_READ_SW(swa, u8, byte);
+ASD_READ_SW(swa, u16, word);
+ASD_READ_SW(swa, u32, dword);
+
+ASD_READ_SW(swb, u8, byte);
+ASD_READ_SW(swb, u16, word);
+ASD_READ_SW(swb, u32, dword);
+
+ASD_READ_SW(swc, u8, byte);
+ASD_READ_SW(swc, u16, word);
+ASD_READ_SW(swc, u32, dword);
+
+ASD_WRITE_SW(swa, u8, byte);
+ASD_WRITE_SW(swa, u16, word);
+ASD_WRITE_SW(swa, u32, dword);
+
+ASD_WRITE_SW(swb, u8, byte);
+ASD_WRITE_SW(swb, u16, word);
+ASD_WRITE_SW(swb, u32, dword);
+
+ASD_WRITE_SW(swc, u8, byte);
+ASD_WRITE_SW(swc, u16, word);
+ASD_WRITE_SW(swc, u32, dword);
+
+/*
+ * A word about sliding windows:
+ * MBAR0 is divided into sliding windows A, C and B, in that order.
+ * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes.
+ * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes.
+ * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F.
+ * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0.
+ * See asd_init_sw() in aic94xx_hwi.c
+ *
+ * We map the most common registers we'd access of the internal 4GB
+ * host adapter memory space. If a register/internal memory location
+ * is wanted which is not mapped, we slide SWB, by paging it,
+ * see asd_move_swb() in aic94xx_reg.c.
+ */
+
+/**
+ * asd_move_swb -- move sliding window B
+ * @asd_ha: pointer to host adapter structure
+ * @reg: register desired to be within range of the new window
+ */
+static inline void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg)
+{
+ u32 base = reg & ~(MBAR0_SWB_SIZE-1);
+ pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base);
+ asd_ha->io_handle[0].swb_base = base;
+}
+
+static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val)
+{
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+ if (io_handle->swa_base <= reg
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+ asd_write_swa_byte (asd_ha, reg,val);
+ else if (io_handle->swb_base <= reg
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+ asd_write_swb_byte (asd_ha, reg, val);
+ else if (io_handle->swc_base <= reg
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+ asd_write_swc_byte (asd_ha, reg, val);
+ else {
+ /* Ok, we have to move SWB */
+ asd_move_swb(asd_ha, reg);
+ asd_write_swb_byte (asd_ha, reg, val);
+ }
+}
+
+#define ASD_WRITE_REG(type, ord) \
+void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\
+{ \
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+ unsigned long flags; \
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
+ spin_lock_irqsave(&asd_ha->iolock, flags); \
+ if (io_handle->swa_base <= reg \
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
+ asd_write_swa_##ord (asd_ha, reg,val); \
+ else if (io_handle->swb_base <= reg \
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
+ asd_write_swb_##ord (asd_ha, reg, val); \
+ else if (io_handle->swc_base <= reg \
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
+ asd_write_swc_##ord (asd_ha, reg, val); \
+ else { \
+ /* Ok, we have to move SWB */ \
+ asd_move_swb(asd_ha, reg); \
+ asd_write_swb_##ord (asd_ha, reg, val); \
+ } \
+ spin_unlock_irqrestore(&asd_ha->iolock, flags); \
+}
+
+ASD_WRITE_REG(u8, byte);
+ASD_WRITE_REG(u16,word);
+ASD_WRITE_REG(u32,dword);
+
+static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg)
+{
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+ u8 val;
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+ if (io_handle->swa_base <= reg
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+ val = asd_read_swa_byte (asd_ha, reg);
+ else if (io_handle->swb_base <= reg
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+ val = asd_read_swb_byte (asd_ha, reg);
+ else if (io_handle->swc_base <= reg
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+ val = asd_read_swc_byte (asd_ha, reg);
+ else {
+ /* Ok, we have to move SWB */
+ asd_move_swb(asd_ha, reg);
+ val = asd_read_swb_byte (asd_ha, reg);
+ }
+ return val;
+}
+
+#define ASD_READ_REG(type, ord) \
+type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg) \
+{ \
+ struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+ type val; \
+ unsigned long flags; \
+ BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \
+ spin_lock_irqsave(&asd_ha->iolock, flags); \
+ if (io_handle->swa_base <= reg \
+ && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \
+ val = asd_read_swa_##ord (asd_ha, reg); \
+ else if (io_handle->swb_base <= reg \
+ && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \
+ val = asd_read_swb_##ord (asd_ha, reg); \
+ else if (io_handle->swc_base <= reg \
+ && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \
+ val = asd_read_swc_##ord (asd_ha, reg); \
+ else { \
+ /* Ok, we have to move SWB */ \
+ asd_move_swb(asd_ha, reg); \
+ val = asd_read_swb_##ord (asd_ha, reg); \
+ } \
+ spin_unlock_irqrestore(&asd_ha->iolock, flags); \
+ return val; \
+}
+
+ASD_READ_REG(u8, byte);
+ASD_READ_REG(u16,word);
+ASD_READ_REG(u32,dword);
+
+/**
+ * asd_read_reg_string -- read a string of bytes from io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @dst: pointer to a destination buffer where data will be written to
+ * @offs: start offset (register) to read from
+ * @count: number of bytes to read
+ */
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+ u32 offs, int count)
+{
+ u8 *p = dst;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->iolock, flags);
+ for ( ; count > 0; count--, offs++, p++)
+ *p = __asd_read_reg_byte(asd_ha, offs);
+ spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
+
+/**
+ * asd_write_reg_string -- write a string of bytes to io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @src: pointer to source buffer where data will be read from
+ * @offs: start offset (register) to write to
+ * @count: number of bytes to write
+ */
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+ u32 offs, int count)
+{
+ u8 *p = src;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->iolock, flags);
+ for ( ; count > 0; count--, offs++, p++)
+ __asd_write_reg_byte(asd_ha, offs, *p);
+ spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver hardware registers definitions.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_REG_H_
+#define _AIC94XX_REG_H_
+
+#include <asm/io.h>
+#include "aic94xx_hwi.h"
+
+/* Values */
+#define AIC9410_DEV_REV_B0 0x8
+
+/* MBAR0, SWA, SWB, SWC, internal memory space addresses */
+#define REG_BASE_ADDR 0xB8000000
+#define REG_BASE_ADDR_CSEQCIO 0xB8002000
+#define REG_BASE_ADDR_EXSI 0xB8042800
+
+#define MBAR0_SWA_SIZE 0x58
+extern u32 MBAR0_SWB_SIZE;
+#define MBAR0_SWC_SIZE 0x8
+
+/* MBAR1, points to On Chip Memory */
+#define OCM_BASE_ADDR 0xA0000000
+#define OCM_MAX_SIZE 0x20000
+
+/* Smallest address possible to reference */
+#define ALL_BASE_ADDR OCM_BASE_ADDR
+
+/* PCI configuration space registers */
+#define PCI_IOBAR_OFFSET 4
+
+#define PCI_CONF_MBAR1 0x6C
+#define PCI_CONF_MBAR0_SWA 0x70
+#define PCI_CONF_MBAR0_SWB 0x74
+#define PCI_CONF_MBAR0_SWC 0x78
+#define PCI_CONF_MBAR_KEY 0x7C
+#define PCI_CONF_FLSH_BAR 0xB8
+
+#include "aic94xx_reg_def.h"
+
+u8 asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg);
+u16 asd_read_reg_word(struct asd_ha_struct *asd_ha, u32 reg);
+u32 asd_read_reg_dword(struct asd_ha_struct *asd_ha, u32 reg);
+
+void asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val);
+void asd_write_reg_word(struct asd_ha_struct *asd_ha, u32 reg, u16 val);
+void asd_write_reg_dword(struct asd_ha_struct *asd_ha, u32 reg, u32 val);
+
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+ u32 offs, int count);
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+ u32 offs, int count);
+
+#define ASD_READ_OCM(type, ord, S) \
+static inline type asd_read_ocm_##ord (struct asd_ha_struct *asd_ha, \
+ u32 offs) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \
+ type val = read##S (io_handle->addr + (unsigned long) offs); \
+ rmb(); \
+ return val; \
+}
+
+ASD_READ_OCM(u8, byte, b);
+ASD_READ_OCM(u16,word, w);
+ASD_READ_OCM(u32,dword,l);
+
+#define ASD_WRITE_OCM(type, ord, S) \
+static inline void asd_write_ocm_##ord (struct asd_ha_struct *asd_ha, \
+ u32 offs, type val) \
+{ \
+ struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \
+ write##S (val, io_handle->addr + (unsigned long) offs); \
+ return; \
+}
+
+ASD_WRITE_OCM(u8, byte, b);
+ASD_WRITE_OCM(u16,word, w);
+ASD_WRITE_OCM(u32,dword,l);
+
+#define ASD_DDBSITE_READ(type, ord) \
+static inline type asd_ddbsite_read_##ord (struct asd_ha_struct *asd_ha, \
+ u16 ddb_site_no, \
+ u16 offs) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \
+ return asd_read_reg_##ord (asd_ha, CTXACCESS); \
+}
+
+ASD_DDBSITE_READ(u32, dword);
+ASD_DDBSITE_READ(u16, word);
+
+static inline u8 asd_ddbsite_read_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no,
+ u16 offs)
+{
+ if (offs & 1)
+ return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+ offs & ~1) >> 8;
+ else
+ return asd_ddbsite_read_word(asd_ha, ddb_site_no,
+ offs) & 0xFF;
+}
+
+
+#define ASD_DDBSITE_WRITE(type, ord) \
+static inline void asd_ddbsite_write_##ord (struct asd_ha_struct *asd_ha, \
+ u16 ddb_site_no, \
+ u16 offs, type val) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \
+ asd_write_reg_##ord (asd_ha, CTXACCESS, val); \
+}
+
+ASD_DDBSITE_WRITE(u32, dword);
+ASD_DDBSITE_WRITE(u16, word);
+
+static inline void asd_ddbsite_write_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no,
+ u16 offs, u8 val)
+{
+ u16 base = offs & ~1;
+ u16 rval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+ if (offs & 1)
+ rval = (val << 8) | (rval & 0xFF);
+ else
+ rval = (rval & 0xFF00) | val;
+ asd_ddbsite_write_word(asd_ha, ddb_site_no, base, rval);
+}
+
+
+#define ASD_SCBSITE_READ(type, ord) \
+static inline type asd_scbsite_read_##ord (struct asd_ha_struct *asd_ha, \
+ u16 scb_site_no, \
+ u16 offs) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \
+ return asd_read_reg_##ord (asd_ha, CTXACCESS); \
+}
+
+ASD_SCBSITE_READ(u32, dword);
+ASD_SCBSITE_READ(u16, word);
+
+static inline u8 asd_scbsite_read_byte(struct asd_ha_struct *asd_ha,
+ u16 scb_site_no,
+ u16 offs)
+{
+ if (offs & 1)
+ return asd_scbsite_read_word(asd_ha, scb_site_no,
+ offs & ~1) >> 8;
+ else
+ return asd_scbsite_read_word(asd_ha, scb_site_no,
+ offs) & 0xFF;
+}
+
+
+#define ASD_SCBSITE_WRITE(type, ord) \
+static inline void asd_scbsite_write_##ord (struct asd_ha_struct *asd_ha, \
+ u16 scb_site_no, \
+ u16 offs, type val) \
+{ \
+ asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \
+ asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \
+ asd_write_reg_##ord (asd_ha, CTXACCESS, val); \
+}
+
+ASD_SCBSITE_WRITE(u32, dword);
+ASD_SCBSITE_WRITE(u16, word);
+
+static inline void asd_scbsite_write_byte(struct asd_ha_struct *asd_ha,
+ u16 scb_site_no,
+ u16 offs, u8 val)
+{
+ u16 base = offs & ~1;
+ u16 rval = asd_scbsite_read_word(asd_ha, scb_site_no, base);
+ if (offs & 1)
+ rval = (val << 8) | (rval & 0xFF);
+ else
+ rval = (rval & 0xFF00) | val;
+ asd_scbsite_write_word(asd_ha, scb_site_no, base, rval);
+}
+
+/**
+ * asd_ddbsite_update_word -- atomically update a word in a ddb site
+ * @asd_ha: pointer to host adapter structure
+ * @ddb_site_no: the DDB site number
+ * @offs: the offset into the DDB
+ * @oldval: old value found in that offset
+ * @newval: the new value to replace it
+ *
+ * This function is used when the sequencers are running and we need to
+ * update a DDB site atomically without expensive pausing and upausing
+ * of the sequencers and accessing the DDB site through the CIO bus.
+ *
+ * Return 0 on success; -EFAULT on parity error; -EAGAIN if the old value
+ * is different than the current value at that offset.
+ */
+static inline int asd_ddbsite_update_word(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no, u16 offs,
+ u16 oldval, u16 newval)
+{
+ u8 done;
+ u16 oval = asd_ddbsite_read_word(asd_ha, ddb_site_no, offs);
+ if (oval != oldval)
+ return -EAGAIN;
+ asd_write_reg_word(asd_ha, AOLDDATA, oldval);
+ asd_write_reg_word(asd_ha, ANEWDATA, newval);
+ do {
+ done = asd_read_reg_byte(asd_ha, ATOMICSTATCTL);
+ } while (!(done & ATOMICDONE));
+ if (done & ATOMICERR)
+ return -EFAULT; /* parity error */
+ else if (done & ATOMICWIN)
+ return 0; /* success */
+ else
+ return -EAGAIN; /* oldval different than current value */
+}
+
+static inline int asd_ddbsite_update_byte(struct asd_ha_struct *asd_ha,
+ u16 ddb_site_no, u16 offs,
+ u8 _oldval, u8 _newval)
+{
+ u16 base = offs & ~1;
+ u16 oval;
+ u16 nval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base);
+ if (offs & 1) {
+ if ((nval >> 8) != _oldval)
+ return -EAGAIN;
+ nval = (_newval << 8) | (nval & 0xFF);
+ oval = (_oldval << 8) | (nval & 0xFF);
+ } else {
+ if ((nval & 0xFF) != _oldval)
+ return -EAGAIN;
+ nval = (nval & 0xFF00) | _newval;
+ oval = (nval & 0xFF00) | _oldval;
+ }
+ return asd_ddbsite_update_word(asd_ha, ddb_site_no, base, oval, nval);
+}
+
+static inline void asd_write_reg_addr(struct asd_ha_struct *asd_ha, u32 reg,
+ dma_addr_t dma_handle)
+{
+ asd_write_reg_dword(asd_ha, reg, ASD_BUSADDR_LO(dma_handle));
+ asd_write_reg_dword(asd_ha, reg+4, ASD_BUSADDR_HI(dma_handle));
+}
+
+static inline u32 asd_get_cmdctx_size(struct asd_ha_struct *asd_ha)
+{
+ /* DCHREVISION returns 0, possibly broken */
+ u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+ return ctxmemsize ? 65536 : 32768;
+}
+
+static inline u32 asd_get_devctx_size(struct asd_ha_struct *asd_ha)
+{
+ u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE;
+ return ctxmemsize ? 8192 : 4096;
+}
+
+static inline void asd_disable_ints(struct asd_ha_struct *asd_ha)
+{
+ asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+}
+
+static inline void asd_enable_ints(struct asd_ha_struct *asd_ha)
+{
+ /* Enable COM SAS interrupt on errors, COMSTAT */
+ asd_write_reg_dword(asd_ha, COMSTATEN,
+ EN_CSBUFPERR | EN_CSERR | EN_OVLYERR);
+ /* Enable DCH SAS CFIFTOERR */
+ asd_write_reg_dword(asd_ha, DCHSTATUS, EN_CFIFTOERR);
+ /* Enable Host Device interrupts */
+ asd_write_reg_dword(asd_ha, CHIMINTEN, SET_CHIMINTEN);
+}
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver hardware registers defintions.
+ *
+ * Copyright (C) 2004 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Luben Tuikov: Some register value updates to make it work with the window
+ * agnostic register r/w functions. Some register corrections, sizes,
+ * etc.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $
+ *
+ */
+
+#ifndef _ADP94XX_REG_DEF_H_
+#define _ADP94XX_REG_DEF_H_
+
+/*
+ * Common definitions.
+ */
+#define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */
+#define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */
+#define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */
+
+/********************* COM_SAS registers definition *************************/
+
+/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h.
+ */
+
+/*
+ * CHIM Registers, Address Range : (0x00-0xFF)
+ */
+#define COMBIST (REG_BASE_ADDR + 0x00)
+
+/* bits 31:24 */
+#define L7BLKRST 0x80000000
+#define L6BLKRST 0x40000000
+#define L5BLKRST 0x20000000
+#define L4BLKRST 0x10000000
+#define L3BLKRST 0x08000000
+#define L2BLKRST 0x04000000
+#define L1BLKRST 0x02000000
+#define L0BLKRST 0x01000000
+#define LmBLKRST 0xFF000000
+#define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid))
+
+#define OCMBLKRST 0x00400000
+#define CTXMEMBLKRST 0x00200000
+#define CSEQBLKRST 0x00100000
+#define EXSIBLKRST 0x00040000
+#define DPIBLKRST 0x00020000
+#define DFIFBLKRST 0x00010000
+#define HARDRST 0x00000200
+#define COMBLKRST 0x00000100
+#define FRCDFPERR 0x00000080
+#define FRCCIOPERR 0x00000020
+#define FRCBISTERR 0x00000010
+#define COMBISTEN 0x00000004
+#define COMBISTDONE 0x00000002 /* ro */
+#define COMBISTFAIL 0x00000001 /* ro */
+
+#define COMSTAT (REG_BASE_ADDR + 0x04)
+
+#define REQMBXREAD 0x00000040
+#define RSPMBXAVAIL 0x00000020
+#define CSBUFPERR 0x00000008
+#define OVLYERR 0x00000004
+#define CSERR 0x00000002
+#define OVLYDMADONE 0x00000001
+
+#define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \
+ CSBUFPERR | OVLYERR | CSERR |\
+ OVLYDMADONE)
+
+#define COMSTATEN (REG_BASE_ADDR + 0x08)
+
+#define EN_REQMBXREAD 0x00000040
+#define EN_RSPMBXAVAIL 0x00000020
+#define EN_CSBUFPERR 0x00000008
+#define EN_OVLYERR 0x00000004
+#define EN_CSERR 0x00000002
+#define EN_OVLYDONE 0x00000001
+
+#define SCBPRO (REG_BASE_ADDR + 0x0C)
+
+#define SCBCONS_MASK 0xFFFF0000
+#define SCBPRO_MASK 0x0000FFFF
+
+#define CHIMREQMBX (REG_BASE_ADDR + 0x10)
+
+#define CHIMRSPMBX (REG_BASE_ADDR + 0x14)
+
+#define CHIMINT (REG_BASE_ADDR + 0x18)
+
+#define EXT_INT0 0x00000800
+#define EXT_INT1 0x00000400
+#define PORRSTDET 0x00000200
+#define HARDRSTDET 0x00000100
+#define DLAVAILQ 0x00000080 /* ro */
+#define HOSTERR 0x00000040
+#define INITERR 0x00000020
+#define DEVINT 0x00000010
+#define COMINT 0x00000008
+#define DEVTIMER2 0x00000004
+#define DEVTIMER1 0x00000002
+#define DLAVAIL 0x00000001
+
+#define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\
+ DEVTIMER2 | DEVTIMER1 | DLAVAIL)
+
+#define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT)
+
+#define CHIMINTEN (REG_BASE_ADDR + 0x1C)
+
+#define RST_EN_EXT_INT1 0x01000000
+#define RST_EN_EXT_INT0 0x00800000
+#define RST_EN_HOSTERR 0x00400000
+#define RST_EN_INITERR 0x00200000
+#define RST_EN_DEVINT 0x00100000
+#define RST_EN_COMINT 0x00080000
+#define RST_EN_DEVTIMER2 0x00040000
+#define RST_EN_DEVTIMER1 0x00020000
+#define RST_EN_DLAVAIL 0x00010000
+#define SET_EN_EXT_INT1 0x00000100
+#define SET_EN_EXT_INT0 0x00000080
+#define SET_EN_HOSTERR 0x00000040
+#define SET_EN_INITERR 0x00000020
+#define SET_EN_DEVINT 0x00000010
+#define SET_EN_COMINT 0x00000008
+#define SET_EN_DEVTIMER2 0x00000004
+#define SET_EN_DEVTIMER1 0x00000002
+#define SET_EN_DLAVAIL 0x00000001
+
+#define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \
+ RST_EN_DEVINT | RST_EN_COMINT | \
+ RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\
+ RST_EN_DLAVAIL)
+
+#define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\
+ SET_EN_DEVINT | SET_EN_COMINT |\
+ SET_EN_DLAVAIL)
+
+#define OVLYDMACTL (REG_BASE_ADDR + 0x20)
+
+#define OVLYADR_MASK 0x07FF0000
+#define OVLYLSEQ_MASK 0x0000FF00
+#define OVLYCSEQ 0x00000080
+#define OVLYHALTERR 0x00000040
+#define PIOCMODE 0x00000020
+#define RESETOVLYDMA 0x00000008 /* wo */
+#define STARTOVLYDMA 0x00000004
+#define STOPOVLYDMA 0x00000002 /* wo */
+#define OVLYDMAACT 0x00000001 /* ro */
+
+#define OVLYDMACNT (REG_BASE_ADDR + 0x24)
+
+#define OVLYDOMAIN1 0x20000000 /* ro */
+#define OVLYDOMAIN0 0x10000000
+#define OVLYBUFADR_MASK 0x007F0000
+#define OVLYDMACNT_MASK 0x00003FFF
+
+#define OVLYDMAADR (REG_BASE_ADDR + 0x28)
+
+#define DMAERR (REG_BASE_ADDR + 0x30)
+
+#define OVLYERRSTAT_MASK 0x0000FF00 /* ro */
+#define CSERRSTAT_MASK 0x000000FF /* ro */
+
+#define SPIODATA (REG_BASE_ADDR + 0x34)
+
+/* 0x38 - 0x3C are reserved */
+
+#define T1CNTRLR (REG_BASE_ADDR + 0x40)
+
+#define T1DONE 0x00010000 /* ro */
+#define TIMER64 0x00000400
+#define T1ENABLE 0x00000200
+#define T1RELOAD 0x00000100
+#define T1PRESCALER_MASK 0x00000003
+
+#define T1CMPR (REG_BASE_ADDR + 0x44)
+
+#define T1CNTR (REG_BASE_ADDR + 0x48)
+
+#define T2CNTRLR (REG_BASE_ADDR + 0x4C)
+
+#define T2DONE 0x00010000 /* ro */
+#define T2ENABLE 0x00000200
+#define T2RELOAD 0x00000100
+#define T2PRESCALER_MASK 0x00000003
+
+#define T2CMPR (REG_BASE_ADDR + 0x50)
+
+#define T2CNTR (REG_BASE_ADDR + 0x54)
+
+/* 0x58h - 0xFCh are reserved */
+
+/*
+ * DCH_SAS Registers, Address Range : (0x800-0xFFF)
+ */
+#define CMDCTXBASE (REG_BASE_ADDR + 0x800)
+
+#define DEVCTXBASE (REG_BASE_ADDR + 0x808)
+
+#define CTXDOMAIN (REG_BASE_ADDR + 0x810)
+
+#define DEVCTXDOMAIN1 0x00000008 /* ro */
+#define DEVCTXDOMAIN0 0x00000004
+#define CMDCTXDOMAIN1 0x00000002 /* ro */
+#define CMDCTXDOMAIN0 0x00000001
+
+#define DCHCTL (REG_BASE_ADDR + 0x814)
+
+#define OCMBISTREPAIR 0x00080000
+#define OCMBISTEN 0x00040000
+#define OCMBISTDN 0x00020000 /* ro */
+#define OCMBISTFAIL 0x00010000 /* ro */
+#define DDBBISTEN 0x00004000
+#define DDBBISTDN 0x00002000 /* ro */
+#define DDBBISTFAIL 0x00001000 /* ro */
+#define SCBBISTEN 0x00000400
+#define SCBBISTDN 0x00000200 /* ro */
+#define SCBBISTFAIL 0x00000100 /* ro */
+
+#define MEMSEL_MASK 0x000000E0
+#define MEMSEL_CCM_LSEQ 0x00000000
+#define MEMSEL_CCM_IOP 0x00000020
+#define MEMSEL_CCM_SASCTL 0x00000040
+#define MEMSEL_DCM_LSEQ 0x00000060
+#define MEMSEL_DCM_IOP 0x00000080
+#define MEMSEL_OCM 0x000000A0
+
+#define FRCERR 0x00000010
+#define AUTORLS 0x00000001
+
+#define DCHREVISION (REG_BASE_ADDR + 0x818)
+
+#define DCHREVISION_MASK 0x000000FF
+
+#define DCHSTATUS (REG_BASE_ADDR + 0x81C)
+
+#define EN_CFIFTOERR 0x00020000
+#define CFIFTOERR 0x00000200
+#define CSEQINT 0x00000100 /* ro */
+#define LSEQ7INT 0x00000080 /* ro */
+#define LSEQ6INT 0x00000040 /* ro */
+#define LSEQ5INT 0x00000020 /* ro */
+#define LSEQ4INT 0x00000010 /* ro */
+#define LSEQ3INT 0x00000008 /* ro */
+#define LSEQ2INT 0x00000004 /* ro */
+#define LSEQ1INT 0x00000002 /* ro */
+#define LSEQ0INT 0x00000001 /* ro */
+
+#define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\
+ LSEQ4INT | LSEQ3INT | LSEQ2INT |\
+ LSEQ1INT | LSEQ0INT)
+
+#define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820)
+#define ENFAIRMST 0x00FF0000
+#define DISWRMST9 0x00000200
+#define DISWRMST8 0x00000100
+#define DISRDMST 0x000000FF
+
+#define ATOMICSTATCTL (REG_BASE_ADDR + 0x824)
+/* 8 bit wide */
+#define AUTOINC 0x80
+#define ATOMICERR 0x04
+#define ATOMICWIN 0x02
+#define ATOMICDONE 0x01
+
+
+#define ALTCIOADR (REG_BASE_ADDR + 0x828)
+/* 16 bit; bits 8:0 define CIO addr space of CSEQ */
+
+#define ASCBPTR (REG_BASE_ADDR + 0x82C)
+/* 16 bit wide */
+
+#define ADDBPTR (REG_BASE_ADDR + 0x82E)
+/* 16 bit wide */
+
+#define ANEWDATA (REG_BASE_ADDR + 0x830)
+/* 16 bit */
+
+#define AOLDDATA (REG_BASE_ADDR + 0x834)
+/* 16 bit */
+
+#define CTXACCESS (REG_BASE_ADDR + 0x838)
+/* 32 bit */
+
+/* 0x83Ch - 0xFFCh are reserved */
+
+/*
+ * ARP2 External Processor Registers, Address Range : (0x00-0x1F)
+ */
+#define ARP2CTL 0x00
+
+#define FRCSCRPERR 0x00040000
+#define FRCARP2PERR 0x00020000
+#define FRCARP2ILLOPC 0x00010000
+#define ENWAITTO 0x00008000
+#define PERRORDIS 0x00004000
+#define FAILDIS 0x00002000
+#define CIOPERRDIS 0x00001000
+#define BREAKEN3 0x00000800
+#define BREAKEN2 0x00000400
+#define BREAKEN1 0x00000200
+#define BREAKEN0 0x00000100
+#define EPAUSE 0x00000008
+#define PAUSED 0x00000004 /* ro */
+#define STEP 0x00000002
+#define ARP2RESET 0x00000001 /* wo */
+
+#define ARP2INT 0x04
+
+#define HALTCODE_MASK 0x00FF0000 /* ro */
+#define ARP2WAITTO 0x00000100
+#define ARP2HALTC 0x00000080
+#define ARP2ILLOPC 0x00000040
+#define ARP2PERR 0x00000020
+#define ARP2CIOPERR 0x00000010
+#define ARP2BREAK3 0x00000008
+#define ARP2BREAK2 0x00000004
+#define ARP2BREAK1 0x00000002
+#define ARP2BREAK0 0x00000001
+
+#define ARP2INTEN 0x08
+
+#define EN_ARP2WAITTO 0x00000100
+#define EN_ARP2HALTC 0x00000080
+#define EN_ARP2ILLOPC 0x00000040
+#define EN_ARP2PERR 0x00000020
+#define EN_ARP2CIOPERR 0x00000010
+#define EN_ARP2BREAK3 0x00000008
+#define EN_ARP2BREAK2 0x00000004
+#define EN_ARP2BREAK1 0x00000002
+#define EN_ARP2BREAK0 0x00000001
+
+#define ARP2BREAKADR01 0x0C
+
+#define BREAKADR1_MASK 0x0FFF0000
+#define BREAKADR0_MASK 0x00000FFF
+
+#define ARP2BREAKADR23 0x10
+
+#define BREAKADR3_MASK 0x0FFF0000
+#define BREAKADR2_MASK 0x00000FFF
+
+/* 0x14h - 0x1Ch are reserved */
+
+/*
+ * ARP2 Registers, Address Range : (0x00-0x1F)
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MODEPTR 0x00
+
+#define DSTMODE 0xF0
+#define SRCMODE 0x0F
+
+#define ALTMODE 0x01
+
+#define ALTDMODE 0xF0
+#define ALTSMODE 0x0F
+
+#define ATOMICXCHG 0x02
+
+#define FLAG 0x04
+
+#define INTCODE_MASK 0xF0
+#define ALTMODEV2 0x04
+#define CARRY_INT 0x02
+#define CARRY 0x01
+
+#define ARP2INTCTL 0x05
+
+#define PAUSEDIS 0x80
+#define RSTINTCTL 0x40
+#define POPALTMODE 0x08
+#define ALTMODEV 0x04
+#define INTMASK 0x02
+#define IRET 0x01
+
+#define STACK 0x06
+
+#define FUNCTION1 0x07
+
+#define PRGMCNT 0x08
+
+#define ACCUM 0x0A
+
+#define SINDEX 0x0C
+
+#define DINDEX 0x0E
+
+#define ALLONES 0x10
+
+#define ALLZEROS 0x11
+
+#define SINDIR 0x12
+
+#define DINDIR 0x13
+
+#define JUMLDIR 0x14
+
+#define ARP2HALTCODE 0x15
+
+#define CURRADDR 0x16
+
+#define LASTADDR 0x18
+
+#define NXTLADDR 0x1A
+
+#define DBGPORTPTR 0x1C
+
+#define DBGPORT 0x1D
+
+/*
+ * CIO Registers.
+ * The definitions have the same address offset for CSEQ and LmSEQ
+ * CIO Bus Registers.
+ */
+#define MnSCBPTR 0x20
+
+#define MnDDBPTR 0x22
+
+#define SCRATCHPAGE 0x24
+
+#define MnSCRATCHPAGE 0x25
+
+#define SCRATCHPAGESV 0x26
+
+#define MnSCRATCHPAGESV 0x27
+
+#define MnDMAERRS 0x46
+
+#define MnSGDMAERRS 0x47
+
+#define MnSGBUF 0x53
+
+#define MnSGDMASTAT 0x5b
+
+#define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */
+
+#define MnDMAENG 0x60
+
+#define MnPIPECTL 0x61
+
+#define MnSGBADR 0x65
+
+#define MnSCB_SITE 0x100
+
+#define MnDDB_SITE 0x180
+
+/*
+ * The common definitions below have the same address offset for both
+ * CSEQ and LmSEQ.
+ */
+#define BISTCTL0 0x4C
+
+#define BISTCTL1 0x50
+
+#define MAPPEDSCR 0x800
+
+/*
+ * CSEQ Host Register, Address Range : (0x000-0xFFC)
+ */
+#define CSEQ_HOST_REG_BASE_ADR 0xB8001000
+
+#define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL)
+
+#define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT)
+
+#define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN)
+
+#define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01)
+
+#define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23)
+
+#define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1)
+
+#define CSEQRAMBISTEN 0x00000040
+#define CSEQRAMBISTDN 0x00000020 /* ro */
+#define CSEQRAMBISTFAIL 0x00000010 /* ro */
+#define CSEQSCRBISTEN 0x00000004
+#define CSEQSCRBISTDN 0x00000002 /* ro */
+#define CSEQSCRBISTFAIL 0x00000001 /* ro */
+
+#define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR)
+
+/*
+ * CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC)
+ * 16 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO
+
+#define CSEQm_CIO_REG(Mode, Reg) \
+ (CSEQ_CIO_REG_BASE_ADR + \
+ ((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg))
+
+#define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR)
+
+#define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE)
+
+#define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG)
+
+#define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG)
+
+#define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL)
+
+#define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK)
+
+#define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1)
+
+#define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT)
+
+#define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM)
+
+#define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX)
+
+#define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX)
+
+#define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES)
+
+#define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS)
+
+#define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR)
+
+#define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR)
+
+#define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR)
+
+#define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE)
+
+#define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR)
+
+#define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR)
+
+#define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR)
+
+#define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR)
+
+#define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT)
+
+#define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE)
+
+#define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR)
+
+#define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR)
+
+#define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE)
+
+#define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28)
+
+#define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C)
+
+/* mode 0-7 */
+#define MnREQMBX 0x30
+#define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30)
+
+/* mode 8 */
+#define CSEQCON CSEQm_CIO_REG(8, 0x30)
+
+/* mode 0-7 */
+#define MnRSPMBX 0x34
+#define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34)
+
+/* mode 8 */
+#define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34)
+
+/* mode 8 */
+#define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35)
+
+/* mode 8 */
+#define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36)
+
+/* mode 8 */
+#define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37)
+
+#define CSHALTERR 0x10
+#define RESETCSDMA 0x08 /* wo */
+#define STARTCSDMA 0x04
+#define STOPCSDMA 0x02 /* wo */
+#define CSDMAACT 0x01 /* ro */
+
+/* mode 0-7 */
+#define MnINT 0x38
+#define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38)
+
+#define CMnREQMBXE 0x02
+#define CMnRSPMBXF 0x01
+#define CMnINT_MASK 0x00000003
+
+/* mode 8 */
+#define CSEQREQMBX CSEQm_CIO_REG(8, 0x38)
+
+/* mode 0-7 */
+#define MnINTEN 0x3C
+#define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C)
+
+#define EN_CMnRSPMBXF 0x01
+
+/* mode 8 */
+#define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C)
+
+/* mode 8 */
+#define CSDMAADR CSEQm_CIO_REG(8, 0x40)
+
+/* mode 8 */
+#define CSDMACNT CSEQm_CIO_REG(8, 0x48)
+
+/* mode 8 */
+#define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D)
+
+#define DONELISTEND 0x10
+#define DONELISTSIZE_MASK 0x0F
+#define DONELISTSIZE_8ELEM 0x01
+#define DONELISTSIZE_16ELEM 0x02
+#define DONELISTSIZE_32ELEM 0x03
+#define DONELISTSIZE_64ELEM 0x04
+#define DONELISTSIZE_128ELEM 0x05
+#define DONELISTSIZE_256ELEM 0x06
+#define DONELISTSIZE_512ELEM 0x07
+#define DONELISTSIZE_1024ELEM 0x08
+#define DONELISTSIZE_2048ELEM 0x09
+#define DONELISTSIZE_4096ELEM 0x0A
+#define DONELISTSIZE_8192ELEM 0x0B
+#define DONELISTSIZE_16384ELEM 0x0C
+
+/* mode 8 */
+#define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E)
+
+/* mode 11 */
+#define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50)
+
+/* mode 11 */
+#define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52)
+
+/* mode 11 */
+#define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54)
+
+#define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60)
+
+#define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61)
+
+#define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62)
+
+#define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64)
+
+#define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68)
+
+/* mode 8, 32x32 bits, 128 bytes of mapped buffer */
+#define CSBUFFER CSEQm_CIO_REG(8, 0x80)
+
+#define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0)
+
+/* mode 0-8 */
+#define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0)
+
+/*
+ * CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC)
+ */
+#define CSEQ_RAM_REG_BASE_ADR 0xB8004000
+
+/*
+ * The common definitions below have the same address offset for all the Link
+ * sequencers.
+ */
+#define MODECTL 0x40
+
+#define DBGMODE 0x44
+
+#define CONTROL 0x48
+#define LEDTIMER 0x00010000
+#define LEDTIMERS_10us 0x00000000
+#define LEDTIMERS_1ms 0x00000800
+#define LEDTIMERS_100ms 0x00001000
+#define LEDMODE_TXRX 0x00000000
+#define LEDMODE_CONNECTED 0x00000200
+#define LEDPOL 0x00000100
+
+#define LSEQRAM 0x1000
+
+/*
+ * LmSEQ Host Registers, Address Range : (0x0000-0x3FFC)
+ */
+#define LSEQ0_HOST_REG_BASE_ADR 0xB8020000
+#define LSEQ1_HOST_REG_BASE_ADR 0xB8024000
+#define LSEQ2_HOST_REG_BASE_ADR 0xB8028000
+#define LSEQ3_HOST_REG_BASE_ADR 0xB802C000
+#define LSEQ4_HOST_REG_BASE_ADR 0xB8030000
+#define LSEQ5_HOST_REG_BASE_ADR 0xB8034000
+#define LSEQ6_HOST_REG_BASE_ADR 0xB8038000
+#define LSEQ7_HOST_REG_BASE_ADR 0xB803C000
+
+#define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2CTL)
+
+#define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2INT)
+
+#define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2INTEN)
+
+#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ DBGMODE)
+
+#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ CONTROL)
+
+#define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2BREAKADR01)
+
+#define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ ARP2BREAKADR23)
+
+#define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ MODECTL)
+
+#define LmAUTODISCI 0x08000000
+#define LmDSBLBITLT 0x04000000
+#define LmDSBLANTT 0x02000000
+#define LmDSBLCRTT 0x01000000
+#define LmDSBLCONT 0x00000100
+#define LmPRIMODE 0x00000080
+#define LmDSBLHOLD 0x00000040
+#define LmDISACK 0x00000020
+#define LmBLIND48 0x00000010
+#define LmRCVMODE_MASK 0x0000000C
+#define LmRCVMODE_PLD 0x00000000
+#define LmRCVMODE_HPC 0x00000004
+
+#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ DBGMODE)
+
+#define LmFRCPERR 0x80000000
+#define LmMEMSEL_MASK 0x30000000
+#define LmFRCRBPERR 0x00000000
+#define LmFRCTBPERR 0x10000000
+#define LmFRCSGBPERR 0x20000000
+#define LmFRCARBPERR 0x30000000
+#define LmRCVIDW 0x00080000
+#define LmINVDWERR 0x00040000
+#define LmRCVDISP 0x00004000
+#define LmDISPERR 0x00002000
+#define LmDSBLDSCR 0x00000800
+#define LmDSBLSCR 0x00000400
+#define LmFRCNAK 0x00000200
+#define LmFRCROFS 0x00000100
+#define LmFRCCRC 0x00000080
+#define LmFRMTYPE_MASK 0x00000070
+#define LmSG_DATA 0x00000000
+#define LmSG_COMMAND 0x00000010
+#define LmSG_TASK 0x00000020
+#define LmSG_TGTXFER 0x00000030
+#define LmSG_RESPONSE 0x00000040
+#define LmSG_IDENADDR 0x00000050
+#define LmSG_OPENADDR 0x00000060
+#define LmDISCRCGEN 0x00000008
+#define LmDISCRCCHK 0x00000004
+#define LmSSXMTFRM 0x00000002
+#define LmSSRCVFRM 0x00000001
+
+#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ CONTROL)
+
+#define LmSTEPXMTFRM 0x00000002
+#define LmSTEPRCVFRM 0x00000001
+
+#define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
+ BISTCTL0)
+
+#define ARBBISTEN 0x40000000
+#define ARBBISTDN 0x20000000 /* ro */
+#define ARBBISTFAIL 0x10000000 /* ro */
+#define TBBISTEN 0x00000400
+#define TBBISTDN 0x00000200 /* ro */
+#define TBBISTFAIL 0x00000100 /* ro */
+#define RBBISTEN 0x00000040
+#define RBBISTDN 0x00000020 /* ro */
+#define RBBISTFAIL 0x00000010 /* ro */
+#define SGBISTEN 0x00000004
+#define SGBISTDN 0x00000002 /* ro */
+#define SGBISTFAIL 0x00000001 /* ro */
+
+#define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum)*LmSEQ_HOST_REG_SIZE) +\
+ BISTCTL1)
+
+#define LmRAMPAGE1 0x00000200
+#define LmRAMPAGE0 0x00000100
+#define LmIMEMBISTEN 0x00000040
+#define LmIMEMBISTDN 0x00000020 /* ro */
+#define LmIMEMBISTFAIL 0x00000010 /* ro */
+#define LmSCRBISTEN 0x00000004
+#define LmSCRBISTDN 0x00000002 /* ro */
+#define LmSCRBISTFAIL 0x00000001 /* ro */
+#define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0)
+#define LmRAMPAGE_LSHIFT 0x8
+
+#define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+ MAPPEDSCR)
+
+#define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
+ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
+ LSEQRAM)
+
+/*
+ * LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC)
+ * 8 modes, each mode is 512 bytes.
+ * Unless specified, the register should valid for all modes.
+ */
+#define LmSEQ_CIOBUS_REG_BASE 0x2000
+
+#define LmSEQ_PHY_BASE(Mode, LinkNum) \
+ (LSEQ0_HOST_REG_BASE_ADR + \
+ (LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \
+ LmSEQ_CIOBUS_REG_BASE + \
+ ((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE))
+
+#define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \
+ (LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg))
+
+#define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR)
+
+#define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE)
+
+#define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG)
+
+#define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG)
+
+#define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL)
+
+#define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK)
+
+#define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1)
+
+#define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT)
+
+#define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM)
+
+#define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX)
+
+#define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX)
+
+#define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES)
+
+#define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS)
+
+#define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR)
+
+#define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR)
+
+#define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR)
+
+#define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE)
+
+#define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR)
+
+#define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR)
+
+#define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR)
+
+#define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR)
+
+#define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT)
+
+#define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE)
+
+#define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \
+ MnSCRATCHPAGE)
+
+#define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28)
+
+#define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30)
+
+#define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34)
+
+#define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38)
+
+#define CTXMEMSIZE 0x80000000 /* ro */
+#define LmACKREQ 0x08000000
+#define LmNAKREQ 0x04000000
+#define LmMnXMTERR 0x02000000
+#define LmM5OOBSVC 0x01000000
+#define LmHWTINT 0x00800000
+#define LmMnCTXDONE 0x00100000
+#define LmM2REQMBXF 0x00080000
+#define LmM2RSPMBXE 0x00040000
+#define LmMnDMAERR 0x00020000
+#define LmRCVPRIM 0x00010000
+#define LmRCVERR 0x00008000
+#define LmADDRRCV 0x00004000
+#define LmMnHDRMISS 0x00002000
+#define LmMnWAITSCB 0x00001000
+#define LmMnRLSSCB 0x00000800
+#define LmMnSAVECTX 0x00000400
+#define LmMnFETCHSG 0x00000200
+#define LmMnLOADCTX 0x00000100
+#define LmMnCFGICL 0x00000080
+#define LmMnCFGSATA 0x00000040
+#define LmMnCFGEXPSATA 0x00000020
+#define LmMnCFGCMPLT 0x00000010
+#define LmMnCFGRBUF 0x00000008
+#define LmMnSAVETTR 0x00000004
+#define LmMnCFGRDAT 0x00000002
+#define LmMnCFGHDR 0x00000001
+
+#define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C)
+
+#define EN_LmACKREQ 0x08000000
+#define EN_LmNAKREQ 0x04000000
+#define EN_LmMnXMTERR 0x02000000
+#define EN_LmM5OOBSVC 0x01000000
+#define EN_LmHWTINT 0x00800000
+#define EN_LmMnCTXDONE 0x00100000
+#define EN_LmM2REQMBXF 0x00080000
+#define EN_LmM2RSPMBXE 0x00040000
+#define EN_LmMnDMAERR 0x00020000
+#define EN_LmRCVPRIM 0x00010000
+#define EN_LmRCVERR 0x00008000
+#define EN_LmADDRRCV 0x00004000
+#define EN_LmMnHDRMISS 0x00002000
+#define EN_LmMnWAITSCB 0x00001000
+#define EN_LmMnRLSSCB 0x00000800
+#define EN_LmMnSAVECTX 0x00000400
+#define EN_LmMnFETCHSG 0x00000200
+#define EN_LmMnLOADCTX 0x00000100
+#define EN_LmMnCFGICL 0x00000080
+#define EN_LmMnCFGSATA 0x00000040
+#define EN_LmMnCFGEXPSATA 0x00000020
+#define EN_LmMnCFGCMPLT 0x00000010
+#define EN_LmMnCFGRBUF 0x00000008
+#define EN_LmMnSAVETTR 0x00000004
+#define EN_LmMnCFGRDAT 0x00000002
+#define EN_LmMnCFGHDR 0x00000001
+
+#define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \
+ EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \
+ EN_LmMnCFGHDR | EN_LmRCVERR | \
+ EN_LmADDRRCV | EN_LmMnHDRMISS | \
+ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+ EN_LmHWTINT | EN_LmMnCTXDONE | \
+ EN_LmRCVPRIM | EN_LmMnCFGSATA | \
+ EN_LmMnCFGEXPSATA | EN_LmMnDMAERR)
+
+#define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \
+ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
+ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
+ EN_LmMnXMTERR | EN_LmHWTINT | \
+ EN_LmMnCTXDONE | EN_LmRCVPRIM | \
+ EN_LmRCVERR | EN_LmMnDMAERR)
+
+#define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \
+ EN_LmM2REQMBXF | EN_LmRCVPRIM | \
+ EN_LmRCVERR)
+
+#define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \
+ EN_LmHWTINT | EN_LmRCVPRIM | \
+ EN_LmRCVERR)
+
+#define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40)
+
+#define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44)
+
+#define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45)
+
+#define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46)
+
+#define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47)
+
+#define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48)
+
+#define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48)
+#define SAS_ALIGN_DEFAULT 0xFF
+
+#define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49)
+
+#define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49)
+#define STP_ALIGN_DEFAULT 0x1F
+
+#define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A)
+
+#define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A)
+
+#define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B)
+
+#define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B)
+
+#define LmDISALIGN 0x20
+#define LmROTSTPALIGN 0x10
+#define LmSTPALIGN 0x08
+#define LmROTNOTIFY 0x04
+#define LmDUALALIGN 0x02
+#define LmROTALIGN 0x01
+
+#define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C)
+
+#define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C)
+
+#define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E)
+
+#define LmMnBUFPERR 0x01
+
+/* mode 0-1 */
+#define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59)
+
+#define LmMnXFRLVL_128 0x05
+#define LmMnXFRLVL_256 0x04
+#define LmMnXFRLVL_512 0x03
+#define LmMnXFRLVL_1024 0x02
+#define LmMnXFRLVL_1536 0x01
+#define LmMnXFRLVL_2048 0x00
+
+ /* mode 0-1 */
+#define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A)
+
+#define LmMnRESETSG 0x04
+#define LmMnSTOPSG 0x02
+#define LmMnSTARTSG 0x01
+
+/* mode 0-1 */
+#define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B)
+
+/* mode 0-1 */
+#define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C)
+
+#define LmMnFLUSH 0x40 /* wo */
+#define LmMnRLSRTRY 0x20 /* wo */
+#define LmMnDISCARD 0x10 /* wo */
+#define LmMnRESETDAT 0x08 /* wo */
+#define LmMnSUSDAT 0x04 /* wo */
+#define LmMnSTOPDAT 0x02 /* wo */
+#define LmMnSTARTDAT 0x01 /* wo */
+
+/* mode 0-1 */
+#define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D)
+
+#define LmMnDPEMPTY 0x80
+#define LmMnFLUSHING 0x40
+#define LmMnDDMAREQ 0x20
+#define LmMnHDMAREQ 0x10
+#define LmMnDATFREE 0x08
+#define LmMnDATSUS 0x04
+#define LmMnDATACT 0x02
+#define LmMnDATEN 0x01
+
+/* mode 0-1 */
+#define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E)
+
+#define LmMnDMATYPE_NORMAL 0x0000
+#define LmMnDMATYPE_HOST_ONLY_TX 0x0001
+#define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002
+#define LmMnDMATYPE_INVALID 0x0003
+#define LmMnDMATYPE_MASK 0x0003
+
+#define LmMnDMAWRAP 0x0004
+#define LmMnBITBUCKET 0x0008
+#define LmMnDISHDR 0x0010
+#define LmMnSTPCRC 0x0020
+#define LmXTEST 0x0040
+#define LmMnDISCRC 0x0080
+#define LmMnENINTLK 0x0100
+#define LmMnADDRFRM 0x0400
+#define LmMnENXMTCRC 0x0800
+
+/* mode 0-1 */
+#define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70)
+
+/* mode 0-1 */
+#define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B)
+#define LmMnDPSEL_MASK 0x07
+#define LmMnEOLPRE 0x40
+#define LmMnEOSPRE 0x80
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Receive Mode n = 0 */
+#define LmMnHRADDR 0x00
+#define LmMnHBYTECNT 0x01
+#define LmMnHREWIND 0x02
+#define LmMnDWADDR 0x03
+#define LmMnDSPACECNT 0x04
+#define LmMnDFRMSIZE 0x05
+
+/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
+/* Transmit Mode n = 1 */
+#define LmMnHWADDR 0x00
+#define LmMnHSPACECNT 0x01
+/* #define LmMnHREWIND 0x02 */
+#define LmMnDRADDR 0x03
+#define LmMnDBYTECNT 0x04
+/* #define LmMnDFRMSIZE 0x05 */
+
+/* mode 0-1 */
+#define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78)
+#define LmMnDPACC_MASK 0x00FFFFFF
+
+/* mode 0-1 */
+#define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D)
+
+#define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80)
+#define LmPRMSTAT0BYTE0 0x80
+#define LmPRMSTAT0BYTE1 0x81
+#define LmPRMSTAT0BYTE2 0x82
+#define LmPRMSTAT0BYTE3 0x83
+
+#define LmFRAMERCVD 0x80000000
+#define LmXFRRDYRCVD 0x40000000
+#define LmUNKNOWNP 0x20000000
+#define LmBREAK 0x10000000
+#define LmDONE 0x08000000
+#define LmOPENACPT 0x04000000
+#define LmOPENRJCT 0x02000000
+#define LmOPENRTRY 0x01000000
+#define LmCLOSERV1 0x00800000
+#define LmCLOSERV0 0x00400000
+#define LmCLOSENORM 0x00200000
+#define LmCLOSECLAF 0x00100000
+#define LmNOTIFYRV2 0x00080000
+#define LmNOTIFYRV1 0x00040000
+#define LmNOTIFYRV0 0x00020000
+#define LmNOTIFYSPIN 0x00010000
+#define LmBROADRV4 0x00008000
+#define LmBROADRV3 0x00004000
+#define LmBROADRV2 0x00002000
+#define LmBROADRV1 0x00001000
+#define LmBROADSES 0x00000800
+#define LmBROADRVCH1 0x00000400
+#define LmBROADRVCH0 0x00000200
+#define LmBROADCH 0x00000100
+#define LmAIPRVWP 0x00000080
+#define LmAIPWP 0x00000040
+#define LmAIPWD 0x00000020
+#define LmAIPWC 0x00000010
+#define LmAIPRV2 0x00000008
+#define LmAIPRV1 0x00000004
+#define LmAIPRV0 0x00000002
+#define LmAIPNRML 0x00000001
+
+#define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \
+ LmBROADRVCH1)
+
+#define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84)
+#define LmPRMSTAT1BYTE0 0x84
+#define LmPRMSTAT1BYTE1 0x85
+#define LmPRMSTAT1BYTE2 0x86
+#define LmPRMSTAT1BYTE3 0x87
+
+#define LmFRMRCVDSTAT 0x80000000
+#define LmBREAK_DET 0x04000000
+#define LmCLOSE_DET 0x02000000
+#define LmDONE_DET 0x01000000
+#define LmXRDY 0x00040000
+#define LmSYNCSRST 0x00020000
+#define LmSYNC 0x00010000
+#define LmXHOLD 0x00008000
+#define LmRRDY 0x00004000
+#define LmHOLD 0x00002000
+#define LmROK 0x00001000
+#define LmRIP 0x00000800
+#define LmCRBLK 0x00000400
+#define LmACK 0x00000200
+#define LmNAK 0x00000100
+#define LmHARDRST 0x00000080
+#define LmERROR 0x00000040
+#define LmRERR 0x00000020
+#define LmPMREQP 0x00000010
+#define LmPMREQS 0x00000008
+#define LmPMACK 0x00000004
+#define LmPMNAK 0x00000002
+#define LmDMAT 0x00000001
+
+/* mode 1 */
+#define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E)
+#define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93)
+
+/* mode 0 */
+#define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0)
+
+#define LmACRCERR 0x00000800
+#define LmPHYOVRN 0x00000400
+#define LmOBOVRN 0x00000200
+#define LmMnZERODATA 0x00000100
+#define LmSATAINTLK 0x00000080
+#define LmMnCRCERR 0x00000020
+#define LmRRDYOVRN 0x00000010
+#define LmMISSSOAF 0x00000008
+#define LmMISSSOF 0x00000004
+#define LmMISSEOAF 0x00000002
+#define LmMISSEOF 0x00000001
+
+#define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4)
+
+#define EN_LmACRCERR 0x00000800
+#define EN_LmPHYOVRN 0x00000400
+#define EN_LmOBOVRN 0x00000200
+#define EN_LmMnZERODATA 0x00000100
+#define EN_LmSATAINTLK 0x00000080
+#define EN_LmFRMBAD 0x00000040
+#define EN_LmMnCRCERR 0x00000020
+#define EN_LmRRDYOVRN 0x00000010
+#define EN_LmMISSSOAF 0x00000008
+#define EN_LmMISSSOF 0x00000004
+#define EN_LmMISSEOAF 0x00000002
+#define EN_LmMISSEOF 0x00000001
+
+#define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \
+ EN_LmRRDYOVRN | EN_LmMISSSOF | \
+ EN_LmMISSEOAF | EN_LmMISSEOF | \
+ EN_LmACRCERR | LmPHYOVRN | \
+ EN_LmOBOVRN | EN_LmMnZERODATA)
+
+#define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5)
+
+#define EN_LmDONETO 0x80
+#define EN_LmINVDISP 0x40
+#define EN_LmINVDW 0x20
+#define EN_LmDWSEVENT 0x08
+#define EN_LmCRTTTO 0x04
+#define EN_LmANTTTO 0x02
+#define EN_LmBITLTTO 0x01
+
+#define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \
+ EN_LmDWSEVENT | EN_LmCRTTTO | \
+ EN_LmANTTTO | EN_LmDONETO | \
+ EN_LmBITLTTO)
+
+#define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7)
+
+#define LmDONETO 0x80
+#define LmINVDISP 0x40
+#define LmINVDW 0x20
+#define LmDWSEVENT 0x08
+#define LmCRTTTO 0x04
+#define LmANTTTO 0x02
+#define LmBITLTTO 0x01
+
+#define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8)
+#define LmDATABUFADR_MASK 0x0FFF
+
+#define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA)
+
+#define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0)
+
+#define EN_LmUNKNOWNP 0x20000000
+#define EN_LmBREAK 0x10000000
+#define EN_LmDONE 0x08000000
+#define EN_LmOPENACPT 0x04000000
+#define EN_LmOPENRJCT 0x02000000
+#define EN_LmOPENRTRY 0x01000000
+#define EN_LmCLOSERV1 0x00800000
+#define EN_LmCLOSERV0 0x00400000
+#define EN_LmCLOSENORM 0x00200000
+#define EN_LmCLOSECLAF 0x00100000
+#define EN_LmNOTIFYRV2 0x00080000
+#define EN_LmNOTIFYRV1 0x00040000
+#define EN_LmNOTIFYRV0 0x00020000
+#define EN_LmNOTIFYSPIN 0x00010000
+#define EN_LmBROADRV4 0x00008000
+#define EN_LmBROADRV3 0x00004000
+#define EN_LmBROADRV2 0x00002000
+#define EN_LmBROADRV1 0x00001000
+#define EN_LmBROADRV0 0x00000800
+#define EN_LmBROADRVCH1 0x00000400
+#define EN_LmBROADRVCH0 0x00000200
+#define EN_LmBROADCH 0x00000100
+#define EN_LmAIPRVWP 0x00000080
+#define EN_LmAIPWP 0x00000040
+#define EN_LmAIPWD 0x00000020
+#define EN_LmAIPWC 0x00000010
+#define EN_LmAIPRV2 0x00000008
+#define EN_LmAIPRV1 0x00000004
+#define EN_LmAIPRV0 0x00000002
+#define EN_LmAIPNRML 0x00000001
+
+#define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \
+ EN_LmDONE | EN_LmOPENACPT | \
+ EN_LmOPENRJCT | EN_LmOPENRTRY | \
+ EN_LmCLOSERV1 | EN_LmCLOSERV0 | \
+ EN_LmCLOSENORM | EN_LmCLOSECLAF | \
+ EN_LmBROADRV4 | EN_LmBROADRV3 | \
+ EN_LmBROADRV2 | EN_LmBROADRV1 | \
+ EN_LmBROADRV0 | EN_LmBROADRVCH1 | \
+ EN_LmBROADRVCH0 | EN_LmBROADCH | \
+ EN_LmAIPRVWP | EN_LmAIPWP | \
+ EN_LmAIPWD | EN_LmAIPWC | \
+ EN_LmAIPRV2 | EN_LmAIPRV1 | \
+ EN_LmAIPRV0 | EN_LmAIPNRML)
+
+#define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4)
+
+#define EN_LmXRDY 0x00040000
+#define EN_LmSYNCSRST 0x00020000
+#define EN_LmSYNC 0x00010000
+#define EN_LmXHOLD 0x00008000
+#define EN_LmRRDY 0x00004000
+#define EN_LmHOLD 0x00002000
+#define EN_LmROK 0x00001000
+#define EN_LmRIP 0x00000800
+#define EN_LmCRBLK 0x00000400
+#define EN_LmACK 0x00000200
+#define EN_LmNAK 0x00000100
+#define EN_LmHARDRST 0x00000080
+#define EN_LmERROR 0x00000040
+#define EN_LmRERR 0x00000020
+#define EN_LmPMREQP 0x00000010
+#define EN_LmPMREQS 0x00000008
+#define EN_LmPMACK 0x00000004
+#define EN_LmPMNAK 0x00000002
+#define EN_LmDMAT 0x00000001
+
+#define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \
+ EN_LmSYNCSRST | \
+ EN_LmPMREQP | EN_LmPMREQS | \
+ EN_LmPMACK | EN_LmPMNAK)
+
+#define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8)
+
+#define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC)
+
+#define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0)
+
+
+/*
+ * LmSEQ CIO Bus Mode 3 Register.
+ * Mode 3: Configuration and Setup, IOP Context SCB.
+ */
+#define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48)
+
+#define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90)
+
+#define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92)
+
+#define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94)
+
+#define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96)
+
+#define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98)
+
+#define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A)
+
+#define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C)
+
+#define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E)
+
+#define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4)
+
+#define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6)
+
+#define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0)
+
+#define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4)
+
+#define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2)
+
+#define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8)
+
+
+/*
+ * LmSEQ CIO Bus Mode 5 Registers.
+ * Mode 5: Phy/OOB Control and Status.
+ */
+#define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg))
+
+#define OOB_BFLTR 0x100
+
+#define BFLTR_THR_MASK 0xF0
+#define BFLTR_TC_MASK 0x0F
+
+#define OOB_INIT_MIN 0x102
+
+#define OOB_INIT_MAX 0x104
+
+#define OOB_INIT_NEG 0x106
+
+#define OOB_SAS_MIN 0x108
+
+#define OOB_SAS_MAX 0x10A
+
+#define OOB_SAS_NEG 0x10C
+
+#define OOB_WAKE_MIN 0x10E
+
+#define OOB_WAKE_MAX 0x110
+
+#define OOB_WAKE_NEG 0x112
+
+#define OOB_IDLE_MAX 0x114
+
+#define OOB_BURST_MAX 0x116
+
+#define OOB_DATA_KBITS 0x126
+
+#define OOB_ALIGN_0_DATA 0x12C
+
+#define OOB_ALIGN_1_DATA 0x130
+
+#define D10_2_DATA_k 0x00
+#define SYNC_DATA_k 0x02
+#define ALIGN_1_DATA_k 0x04
+#define ALIGN_0_DATA_k 0x08
+#define BURST_DATA_k 0x10
+
+#define OOB_PHY_RESET_COUNT 0x13C
+
+#define OOB_SIG_GEN 0x140
+
+#define START_OOB 0x80
+#define START_DWS 0x40
+#define ALIGN_CNT3 0x30
+#define ALIGN_CNT2 0x20
+#define ALIGN_CNT1 0x10
+#define ALIGN_CNT4 0x00
+#define STOP_DWS 0x08
+#define SEND_COMSAS 0x04
+#define SEND_COMINIT 0x02
+#define SEND_COMWAKE 0x01
+
+#define OOB_XMIT 0x141
+
+#define TX_ENABLE 0x80
+#define XMIT_OOB_BURST 0x10
+#define XMIT_D10_2 0x08
+#define XMIT_SYNC 0x04
+#define XMIT_ALIGN_1 0x02
+#define XMIT_ALIGN_0 0x01
+
+#define FUNCTION_MASK 0x142
+
+#define SAS_MODE_DIS 0x80
+#define SATA_MODE_DIS 0x40
+#define SPINUP_HOLD_DIS 0x20
+#define HOT_PLUG_DIS 0x10
+#define SATA_PS_DIS 0x08
+#define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS)
+
+#define OOB_MODE 0x143
+
+#define SAS_MODE 0x80
+#define SATA_MODE 0x40
+#define SLOW_CLK 0x20
+#define FORCE_XMIT_15 0x08
+#define PHY_SPEED_60 0x04
+#define PHY_SPEED_30 0x02
+#define PHY_SPEED_15 0x01
+
+#define CURRENT_STATUS 0x144
+
+#define CURRENT_OOB_DONE 0x80
+#define CURRENT_LOSS_OF_SIGNAL 0x40
+#define CURRENT_SPINUP_HOLD 0x20
+#define CURRENT_HOT_PLUG_CNCT 0x10
+#define CURRENT_GTO_TIMEOUT 0x08
+#define CURRENT_OOB_TIMEOUT 0x04
+#define CURRENT_DEVICE_PRESENT 0x02
+#define CURRENT_OOB_ERROR 0x01
+
+#define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_GTO_TIMEOUT)
+
+#define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_OOB_ERROR)
+
+#define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \
+ CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_DEVICE_PRESENT)
+
+#define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \
+ CURRENT_DEVICE_PRESENT)
+
+#define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL
+
+#define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \
+ CURRENT_LOSS_OF_SIGNAL | \
+ CURRENT_SPINUP_HOLD | \
+ CURRENT_HOT_PLUG_CNCT | \
+ CURRENT_GTO_TIMEOUT | \
+ CURRENT_DEVICE_PRESENT | \
+ CURRENT_OOB_ERROR )
+
+#define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \
+ CURRENT_GTO_TIMEOUT | \
+ CURRENT_OOB_TIMEOUT | \
+ CURRENT_OOB_ERROR )
+
+#define SPEED_MASK 0x145
+
+#define SATA_SPEED_30_DIS 0x10
+#define SATA_SPEED_15_DIS 0x08
+#define SAS_SPEED_60_DIS 0x04
+#define SAS_SPEED_30_DIS 0x02
+#define SAS_SPEED_15_DIS 0x01
+#define SAS_SPEED_MASK_DEFAULT 0x00
+
+#define OOB_TIMER_ENABLE 0x14D
+
+#define HOT_PLUG_EN 0x80
+#define RCD_EN 0x40
+#define COMTIMER_EN 0x20
+#define SNTT_EN 0x10
+#define SNLT_EN 0x04
+#define SNWT_EN 0x02
+#define ALIGN_EN 0x01
+
+#define OOB_STATUS 0x14E
+
+#define OOB_DONE 0x80
+#define LOSS_OF_SIGNAL 0x40 /* ro */
+#define SPINUP_HOLD 0x20
+#define HOT_PLUG_CNCT 0x10 /* ro */
+#define GTO_TIMEOUT 0x08 /* ro */
+#define OOB_TIMEOUT 0x04 /* ro */
+#define DEVICE_PRESENT 0x02 /* ro */
+#define OOB_ERROR 0x01 /* ro */
+
+#define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \
+ OOB_TIMEOUT | OOB_ERROR)
+
+#define OOB_STATUS_CLEAR 0x14F
+
+#define OOB_DONE_CLR 0x80
+#define LOSS_OF_SIGNAL_CLR 0x40
+#define SPINUP_HOLD_CLR 0x20
+#define HOT_PLUG_CNCT_CLR 0x10
+#define GTO_TIMEOUT_CLR 0x08
+#define OOB_TIMEOUT_CLR 0x04
+#define OOB_ERROR_CLR 0x01
+
+#define HOT_PLUG_DELAY 0x150
+/* In 5 ms units. 20 = 100 ms. */
+#define HOTPLUG_DELAY_TIMEOUT 20
+
+
+#define INT_ENABLE_2 0x15A
+
+#define OOB_DONE_EN 0x80
+#define LOSS_OF_SIGNAL_EN 0x40
+#define SPINUP_HOLD_EN 0x20
+#define HOT_PLUG_CNCT_EN 0x10
+#define GTO_TIMEOUT_EN 0x08
+#define OOB_TIMEOUT_EN 0x04
+#define DEVICE_PRESENT_EN 0x02
+#define OOB_ERROR_EN 0x01
+
+#define PHY_CONTROL_0 0x160
+
+#define PHY_LOWPWREN_TX 0x80
+#define PHY_LOWPWREN_RX 0x40
+#define SPARE_REG_160_B5 0x20
+#define OFFSET_CANCEL_RX 0x10
+
+/* bits 3:2 */
+#define PHY_RXCOMCENTER_60V 0x00
+#define PHY_RXCOMCENTER_70V 0x04
+#define PHY_RXCOMCENTER_80V 0x08
+#define PHY_RXCOMCENTER_90V 0x0C
+#define PHY_RXCOMCENTER_MASK 0x0C
+
+#define PHY_RESET 0x02
+#define SAS_DEFAULT_SEL 0x01
+
+#define PHY_CONTROL_1 0x161
+
+/* bits 2:0 */
+#define SATA_PHY_DETLEVEL_50mv 0x00
+#define SATA_PHY_DETLEVEL_75mv 0x01
+#define SATA_PHY_DETLEVEL_100mv 0x02
+#define SATA_PHY_DETLEVEL_125mv 0x03
+#define SATA_PHY_DETLEVEL_150mv 0x04
+#define SATA_PHY_DETLEVEL_175mv 0x05
+#define SATA_PHY_DETLEVEL_200mv 0x06
+#define SATA_PHY_DETLEVEL_225mv 0x07
+#define SATA_PHY_DETLEVEL_MASK 0x07
+
+/* bits 5:3 */
+#define SAS_PHY_DETLEVEL_50mv 0x00
+#define SAS_PHY_DETLEVEL_75mv 0x08
+#define SAS_PHY_DETLEVEL_100mv 0x10
+#define SAS_PHY_DETLEVEL_125mv 0x11
+#define SAS_PHY_DETLEVEL_150mv 0x20
+#define SAS_PHY_DETLEVEL_175mv 0x21
+#define SAS_PHY_DETLEVEL_200mv 0x30
+#define SAS_PHY_DETLEVEL_225mv 0x31
+#define SAS_PHY_DETLEVEL_MASK 0x38
+
+#define PHY_CONTROL_2 0x162
+
+/* bits 7:5 */
+#define SATA_PHY_DRV_400mv 0x00
+#define SATA_PHY_DRV_450mv 0x20
+#define SATA_PHY_DRV_500mv 0x40
+#define SATA_PHY_DRV_550mv 0x60
+#define SATA_PHY_DRV_600mv 0x80
+#define SATA_PHY_DRV_650mv 0xA0
+#define SATA_PHY_DRV_725mv 0xC0
+#define SATA_PHY_DRV_800mv 0xE0
+#define SATA_PHY_DRV_MASK 0xE0
+
+/* bits 4:3 */
+#define SATA_PREEMP_0 0x00
+#define SATA_PREEMP_1 0x08
+#define SATA_PREEMP_2 0x10
+#define SATA_PREEMP_3 0x18
+#define SATA_PREEMP_MASK 0x18
+
+#define SATA_CMSH1P5 0x04
+
+/* bits 1:0 */
+#define SATA_SLEW_0 0x00
+#define SATA_SLEW_1 0x01
+#define SATA_SLEW_2 0x02
+#define SATA_SLEW_3 0x03
+#define SATA_SLEW_MASK 0x03
+
+#define PHY_CONTROL_3 0x163
+
+/* bits 7:5 */
+#define SAS_PHY_DRV_400mv 0x00
+#define SAS_PHY_DRV_450mv 0x20
+#define SAS_PHY_DRV_500mv 0x40
+#define SAS_PHY_DRV_550mv 0x60
+#define SAS_PHY_DRV_600mv 0x80
+#define SAS_PHY_DRV_650mv 0xA0
+#define SAS_PHY_DRV_725mv 0xC0
+#define SAS_PHY_DRV_800mv 0xE0
+#define SAS_PHY_DRV_MASK 0xE0
+
+/* bits 4:3 */
+#define SAS_PREEMP_0 0x00
+#define SAS_PREEMP_1 0x08
+#define SAS_PREEMP_2 0x10
+#define SAS_PREEMP_3 0x18
+#define SAS_PREEMP_MASK 0x18
+
+#define SAS_CMSH1P5 0x04
+
+/* bits 1:0 */
+#define SAS_SLEW_0 0x00
+#define SAS_SLEW_1 0x01
+#define SAS_SLEW_2 0x02
+#define SAS_SLEW_3 0x03
+#define SAS_SLEW_MASK 0x03
+
+#define PHY_CONTROL_4 0x168
+
+#define PHY_DONE_CAL_TX 0x80
+#define PHY_DONE_CAL_RX 0x40
+#define RX_TERM_LOAD_DIS 0x20
+#define TX_TERM_LOAD_DIS 0x10
+#define AUTO_TERM_CAL_DIS 0x08
+#define PHY_SIGDET_FLTR_EN 0x04
+#define OSC_FREQ 0x02
+#define PHY_START_CAL 0x01
+
+/*
+ * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ */
+#define PCIX_REG_BASE_ADR 0xB8040000
+
+#define PCIC_VENDOR_ID 0x00
+
+#define PCIC_DEVICE_ID 0x02
+
+#define PCIC_COMMAND 0x04
+
+#define INT_DIS 0x0400
+#define FBB_EN 0x0200 /* ro */
+#define SERR_EN 0x0100
+#define STEP_EN 0x0080 /* ro */
+#define PERR_EN 0x0040
+#define VGA_EN 0x0020 /* ro */
+#define MWI_EN 0x0010
+#define SPC_EN 0x0008
+#define MST_EN 0x0004
+#define MEM_EN 0x0002
+#define IO_EN 0x0001
+
+#define PCIC_STATUS 0x06
+
+#define PERR_DET 0x8000
+#define SERR_GEN 0x4000
+#define MABT_DET 0x2000
+#define TABT_DET 0x1000
+#define TABT_GEN 0x0800
+#define DPERR_DET 0x0100
+#define CAP_LIST 0x0010
+#define INT_STAT 0x0008
+
+#define PCIC_DEVREV_ID 0x08
+
+#define PCIC_CLASS_CODE 0x09
+
+#define PCIC_CACHELINE_SIZE 0x0C
+
+#define PCIC_MBAR0 0x10
+
+#define PCIC_MBAR0_OFFSET 0
+
+#define PCIC_MBAR1 0x18
+
+#define PCIC_MBAR1_OFFSET 2
+
+#define PCIC_IOBAR 0x20
+
+#define PCIC_IOBAR_OFFSET 4
+
+#define PCIC_SUBVENDOR_ID 0x2C
+
+#define PCIC_SUBSYTEM_ID 0x2E
+
+#define PCIX_STATUS 0x44
+#define RCV_SCE 0x20000000
+#define UNEXP_SC 0x00080000
+#define SC_DISCARD 0x00040000
+
+#define ECC_CTRL_STAT 0x48
+#define UNCOR_ECCERR 0x00000008
+
+#define PCIC_PM_CSR 0x5C
+
+#define PWR_STATE_D0 0
+#define PWR_STATE_D1 1 /* not supported */
+#define PWR_STATE_D2 2 /* not supported */
+#define PWR_STATE_D3 3
+
+#define PCIC_BASE1 0x6C /* internal use only */
+
+#define BASE1_RSVD 0xFFFFFFF8
+
+#define PCIC_BASEA 0x70 /* internal use only */
+
+#define BASEA_RSVD 0xFFFFFFC0
+#define BASEA_START 0
+
+#define PCIC_BASEB 0x74 /* internal use only */
+
+#define BASEB_RSVD 0xFFFFFF80
+#define BASEB_IOMAP_MASK 0x7F
+#define BASEB_START 0x80
+
+#define PCIC_BASEC 0x78 /* internal use only */
+
+#define BASEC_RSVD 0xFFFFFFFC
+#define BASEC_MASK 0x03
+#define BASEC_START 0x58
+
+#define PCIC_MBAR_KEY 0x7C /* internal use only */
+
+#define MBAR_KEY_MASK 0xFFFFFFFF
+
+#define PCIC_HSTPCIX_CNTRL 0xA0
+
+#define REWIND_DIS 0x0800
+#define SC_TMR_DIS 0x04000000
+
+#define PCIC_MBAR0_MASK 0xA8
+#define PCIC_MBAR0_SIZE_MASK 0x1FFFE000
+#define PCIC_MBAR0_SIZE_SHIFT 13
+#define PCIC_MBAR0_SIZE(val) \
+ (((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT)
+
+#define PCIC_FLASH_MBAR 0xB8
+
+#define PCIC_INTRPT_STAT 0xD4
+
+#define PCIC_TP_CTRL 0xFC
+
+/*
+ * EXSI Registers, Addresss Range: (0x00-0xFC)
+ */
+#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
+
+#define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00)
+
+#define OCMINITIALIZED 0x80000000
+#define ASIEN 0x00400000
+#define HCMODE 0x00200000
+#define PCIDEF 0x00100000
+#define COMSTOCK 0x00080000
+#define SEEPROMEND 0x00040000
+#define MSTTIMEN 0x00020000
+#define XREGEX 0x00000200
+#define NVRAMW 0x00000100
+#define NVRAMEX 0x00000080
+#define SRAMW 0x00000040
+#define SRAMEX 0x00000020
+#define FLASHW 0x00000010
+#define FLASHEX 0x00000008
+#define SEEPROMCFG 0x00000004
+#define SEEPROMTYP 0x00000002
+#define SEEPROMEX 0x00000001
+
+
+#define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04)
+
+#define MODINT_EN 0x00000001
+
+
+#define PMSTATR (EXSI_REG_BASE_ADR + 0x10)
+
+#define FLASHRST 0x00000002
+#define FLASHRDY 0x00000001
+
+
+#define FLCNFGR (EXSI_REG_BASE_ADR + 0x14)
+
+#define FLWEH_MASK 0x30000000
+#define FLWESU_MASK 0x0C000000
+#define FLWEPW_MASK 0x03F00000
+#define FLOEH_MASK 0x000C0000
+#define FLOESU_MASK 0x00030000
+#define FLOEPW_MASK 0x0000FC00
+#define FLCSH_MASK 0x00000300
+#define FLCSSU_MASK 0x000000C0
+#define FLCSPW_MASK 0x0000003F
+
+#define SRCNFGR (EXSI_REG_BASE_ADR + 0x18)
+
+#define SRWEH_MASK 0x30000000
+#define SRWESU_MASK 0x0C000000
+#define SRWEPW_MASK 0x03F00000
+
+#define SROEH_MASK 0x000C0000
+#define SROESU_MASK 0x00030000
+#define SROEPW_MASK 0x0000FC00
+#define SRCSH_MASK 0x00000300
+#define SRCSSU_MASK 0x000000C0
+#define SRCSPW_MASK 0x0000003F
+
+#define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C)
+
+#define NVWEH_MASK 0x30000000
+#define NVWESU_MASK 0x0C000000
+#define NVWEPW_MASK 0x03F00000
+#define NVOEH_MASK 0x000C0000
+#define NVOESU_MASK 0x00030000
+#define NVOEPW_MASK 0x0000FC00
+#define NVCSH_MASK 0x00000300
+#define NVCSSU_MASK 0x000000C0
+#define NVCSPW_MASK 0x0000003F
+
+#define XRCNFGR (EXSI_REG_BASE_ADR + 0x20)
+
+#define XRWEH_MASK 0x30000000
+#define XRWESU_MASK 0x0C000000
+#define XRWEPW_MASK 0x03F00000
+#define XROEH_MASK 0x000C0000
+#define XROESU_MASK 0x00030000
+#define XROEPW_MASK 0x0000FC00
+#define XRCSH_MASK 0x00000300
+#define XRCSSU_MASK 0x000000C0
+#define XRCSPW_MASK 0x0000003F
+
+#define XREGADDR (EXSI_REG_BASE_ADR + 0x24)
+
+#define XRADDRINCEN 0x80000000
+#define XREGADD_MASK 0x007FFFFF
+
+
+#define XREGDATAR (EXSI_REG_BASE_ADR + 0x28)
+
+#define XREGDATA_MASK 0x0000FFFF
+
+#define GPIOOER (EXSI_REG_BASE_ADR + 0x40)
+
+#define GPIOODENR (EXSI_REG_BASE_ADR + 0x44)
+
+#define GPIOINVR (EXSI_REG_BASE_ADR + 0x48)
+
+#define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C)
+
+#define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50)
+
+#define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54)
+
+#define GPIO_EXTSRC 0x00000001
+
+#define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0)
+
+#define SXFERDONE 0x00000100
+#define SXFERCNT_MASK 0x000000E0
+#define SCMDTYP_MASK 0x0000001C
+#define SXFERSTART 0x00000002
+#define SXFEREN 0x00000001
+
+#define SRATER (EXSI_REG_BASE_ADR + 0xA4)
+
+#define SADDRR (EXSI_REG_BASE_ADR + 0xA8)
+
+#define SADDR_MASK 0x0000FFFF
+
+#define SDATAOR (EXSI_REG_BASE_ADR + 0xAC)
+
+#define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC)
+#define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD)
+#define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE)
+#define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF)
+
+#define SDATAIR (EXSI_REG_BASE_ADR + 0xB0)
+
+#define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0)
+#define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1)
+#define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2)
+#define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3)
+
+#define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0)
+#define ASIFMTERR 0x00000400
+#define ASISEECHKERR 0x00000200
+#define ASIERR 0x00000100
+
+#define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4)
+#define CHECKSUM_MASK 0x0000FFFF
+
+#define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8)
+#define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC)
+#define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0)
+#define CPI2ASIBYTECNT_MASK 0x00070000
+#define CPI2ASIBYTEEN_MASK 0x0000F000
+#define CPI2ASITARGERR_MASK 0x00000F00
+#define CPI2ASITARGMID_MASK 0x000000F0
+#define CPI2ASIMSTERR_MASK 0x0000000F
+
+/*
+ * XSRAM, External SRAM (DWord and any BE pattern accessible)
+ */
+#define XSRAM_REG_BASE_ADDR 0xB8100000
+#define XSRAM_SIZE 0x100000
+
+/*
+ * NVRAM Registers, Address Range: (0x00000 - 0x3FFFF).
+ */
+#define NVRAM_REG_BASE_ADR 0xBF800000
+#define NVRAM_MAX_BASE_ADR 0x003FFFFF
+
+/* OCM base address */
+#define OCM_BASE_ADDR 0xA0000000
+#define OCM_MAX_SIZE 0x20000
+
+/*
+ * Sequencers (Central and Link) Scratch RAM page definitions.
+ */
+
+/*
+ * The Central Management Sequencer (CSEQ) Scratch Memory is a 1024
+ * byte memory. It is dword accessible and has byte parity
+ * protection. The CSEQ accesses it in 32 byte windows, either as mode
+ * dependent or mode independent memory. Each mode has 96 bytes,
+ * (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of
+ * Mode Independent memory (four 32 byte pages 3-7). Note that mode
+ * dependent scratch memory, Mode 8, page 0-3 overlaps mode
+ * independent scratch memory, pages 0-3.
+ * - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and
+ * 128 bytes in mode 8,
+ * - 259 bytes of mode independent scratch, common to modes 0-15.
+ *
+ * Sequencer scratch RAM is 1024 bytes. This scratch memory is
+ * divided into mode dependent and mode independent scratch with this
+ * memory further subdivided into pages of size 32 bytes. There are 5
+ * pages (160 bytes) of mode independent scratch and 3 pages of
+ * dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages
+ * 0-2 dependent scratch overlap with pages 0-2 of mode independent
+ * scratch memory.
+ *
+ * The host accesses this scratch in a different manner from the
+ * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
+ * and CMnSCRPAGE to access the scratch memory. A flat mapping of the
+ * scratch memory is avaliable for software convenience and to prevent
+ * corruption while the sequencer is running. This memory is mapped
+ * onto addresses 800h - BFFh, total of 400h bytes.
+ *
+ * These addresses are mapped as follows:
+ *
+ * 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1
+ * 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1
+ * 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1
+ * 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1
+ * 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1
+ * 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1
+ * 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1
+ * 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1
+ * A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2
+ * Mode Independent Scratch Pages 0-2
+ * A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3
+ * Mode Independent Scratch Page 3
+ * A80h-AFFh Mode Independent Scratch Pages 4-7
+ * B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2
+ * B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2
+ * B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2
+ * B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2
+ * B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2
+ * BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2
+ * BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2
+ * BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2
+ */
+
+/* General macros */
+#define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */
+
+/* All macros start with offsets from base + 0x800 (CMAPPEDSCR).
+ * Mode dependent scratch page 0, mode 0.
+ * For modes 1-7 you have to do arithmetic. */
+#define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000)
+#define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002)
+#define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004)
+#define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006)
+#define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008)
+
+/* Mode dependent scratch page 0 mode 8 macros. */
+#define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200)
+#define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202)
+#define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204)
+#define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206)
+#define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208)
+#define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A)
+#define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C)
+#define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E)
+#define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210)
+#define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212)
+#define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213)
+#define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A)
+#define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C)
+#define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E)
+
+/* Mode dependent scratch page 1 mode 8 macros. */
+#define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220)
+#define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228)
+
+/* Mode dependent scratch page 2 mode 8 macros */
+#define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240)
+#define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248)
+#define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250)
+#define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254)
+
+/* Mode independent scratch page 4 macros. */
+#define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280)
+#define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282)
+#define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284)
+#define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286)
+#define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288)
+#define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A)
+#define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C)
+#define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E)
+#define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290)
+#define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292)
+#define CSEQ_REG0 (CMAPPEDSCR + 0x0294)
+#define CSEQ_REG1 (CMAPPEDSCR + 0x0296)
+#define CSEQ_REG2 (CMAPPEDSCR + 0x0298)
+#define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C)
+#define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D)
+#define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E)
+
+/* Mode independent scratch page 5 macros. */
+#define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0)
+#define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8)
+#define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0)
+#define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2)
+#define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4)
+#define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6)
+#define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7)
+#define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8)
+
+/* Mode independent scratch page 6 macros. */
+#define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0)
+#define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2)
+#define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4)
+#define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6)
+#define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7)
+#define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8)
+#define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA)
+#define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0)
+#define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2)
+#define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5)
+#define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6)
+#define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8)
+#define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA)
+#define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC)
+
+/* Mode independent scratch page 7 macros. */
+#define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0)
+#define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8)
+#define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0)
+#define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2)
+#define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4)
+#define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6)
+#define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7)
+#define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8)
+#define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA)
+#define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC)
+
+/***************************************************************************
+* Link m Sequencer scratch RAM is 512 bytes.
+* This scratch memory is divided into mode dependent and mode
+* independent scratch with this memory further subdivided into
+* pages of size 32 bytes. There are 4 pages (128 bytes) of
+* mode independent scratch and 4 pages of dependent scratch
+* memory for modes 0-2 (384 bytes).
+*
+* The host accesses this scratch in a different manner from the
+* link sequencer. The sequencer has to use LSEQ registers
+* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
+* mapping of the scratch memory is avaliable for software
+* convenience and to prevent corruption while the sequencer is
+* running. This memory is mapped onto addresses 800h - 9FFh.
+*
+* These addresses are mapped as follows:
+*
+* 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2
+* 860h-87Fh Mode Dependent Scratch Mode 0 Page 3
+* Mode Dependent Scratch Mode 5 Page 0
+* 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2
+* 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3
+* Mode Dependent Scratch Mode 5 Page 1
+* 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2
+* 960h-97Fh Mode Dependent Scratch Mode 2 Page 3
+* Mode Dependent Scratch Mode 5 Page 2
+* 980h-9DFh Mode Independent Scratch Pages 0-3
+* 9E0h-9FFh Mode Independent Scratch Page 3
+* Mode Dependent Scratch Mode 5 Page 3
+*
+****************************************************************************/
+/* General macros */
+#define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */
+#define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */
+#define LSEQ_MODE5_PAGE0_OFFSET 0x60
+
+/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */
+/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */
+#define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000)
+#define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002)
+#define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004)
+
+/* Mode flag macros (byte 0) */
+#define SAS_SAVECTX_OCCURRED 0x80
+#define SAS_OOBSVC_OCCURRED 0x40
+#define SAS_OOB_DEVICE_PRESENT 0x20
+#define SAS_CFGHDR_OCCURRED 0x10
+#define SAS_RCV_INTS_ARE_DISABLED 0x08
+#define SAS_OOB_HOT_PLUG_CNCT 0x04
+#define SAS_AWAIT_OPEN_CONNECTION 0x02
+#define SAS_CFGCMPLT_OCCURRED 0x01
+
+/* Mode flag macros (byte 1) */
+#define SAS_RLSSCB_OCCURRED 0x80
+#define SAS_FORCED_HEADER_MISS 0x40
+
+#define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006)
+#define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008)
+#define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B)
+#define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C)
+
+/* Mode dependent scratch page 0 macros for mode 0 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E)
+#define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010)
+#define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012)
+#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014)
+#define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016)
+#define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A)
+#define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B)
+#define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C)
+#define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D)
+#define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E)
+
+/* Mode dependent scratch page 0 macros for mode 1 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E)
+#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090)
+#define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092)
+#define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A)
+#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B)
+#define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C)
+#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D)
+#define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E)
+
+/* Mode dependent scratch page 0 macros for mode 2 (non-common) */
+#define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E)
+#define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110)
+#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112)
+#define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114)
+#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116)
+#define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A)
+
+/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */
+/* Absolute offsets */
+#define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E)
+#define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F)
+#define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070)
+#define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072)
+#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073)
+#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074)
+#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075)
+#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076)
+#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
+#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C)
+#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
+
+/* Mode dependent scratch page 1, mode 0 and mode 1 */
+#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020)
+#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0)
+#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0)
+
+/* Mode dependent scratch page 1 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120)
+#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124)
+#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128)
+
+/* Mode dependent scratch page 1 macros for mode 4/5 */
+#define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0)
+#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1)
+#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4)
+#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5)
+#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB)
+#define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0)
+#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2)
+#define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4)
+
+/* Mode dependent scratch page 2 macros for mode 0 */
+/* Absolute offsets */
+#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040)
+#define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B)
+#define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C)
+#define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E)
+#define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F)
+
+/* Mode dependent scratch page 2 macros for mode 1 */
+/* Absolute offsets */
+/* byte 0 bits 1-0 are domain select. */
+#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0)
+#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8)
+#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC)
+#define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4)
+
+/* Mode dependent scratch page 2 macros for mode 2 */
+/* Absolute offsets */
+#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140)
+#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144)
+#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148)
+#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C)
+#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \
+ (LmSCRATCH(LinkNum) + 0x0150)
+#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154)
+
+/* Mode dependent scratch page 2 macros for mode 5 */
+#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160)
+#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164)
+#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168)
+#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C)
+
+/* Mode dependent scratch page 3 macros for modes 0 and 1 */
+/* None defined */
+
+/* Mode dependent scratch page 3 macros for modes 2 and 5 */
+/* None defined */
+
+/* Mode Independent Scratch page 0 macros. */
+#define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180)
+#define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182)
+#define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186)
+#define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187)
+/*
+ * Currently only bit 0, SAS_DWSAQD, is used.
+ */
+#define SAS_DWSAQD 0x01 /*
+ * DWSSTATUS: DWSAQD
+ * bit las read in ISR.
+ */
+#define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188)
+/* Connection states (byte 0) */
+#define SAS_WE_OPENED_CS 0x01
+#define SAS_DEVICE_OPENED_CS 0x02
+#define SAS_WE_SENT_DONE_CS 0x04
+#define SAS_DEVICE_SENT_DONE_CS 0x08
+#define SAS_WE_SENT_CLOSE_CS 0x10
+#define SAS_DEVICE_SENT_CLOSE_CS 0x20
+#define SAS_WE_SENT_BREAK_CS 0x40
+#define SAS_DEVICE_SENT_BREAK_CS 0x80
+/* Connection states (byte 1) */
+#define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01
+#define SAS_AIP_RECEIVED_CS 0x02
+#define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04
+#define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08
+#define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10
+#define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20
+/* Connection states (byte 2) */
+#define SAS_SMP_RESPONSE_RECEIVED_CS 0x01
+#define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02
+#define SAS_DEVICE_SENT_DMAT_CS 0x04
+#define SAS_DEVICE_SENT_SYNCSRST_CS 0x08
+#define SAS_CLEARING_AFFILIATION_CS 0x20
+#define SAS_RXTASK_ACTIVE_CS 0x40
+#define SAS_TXTASK_ACTIVE_CS 0x80
+/* Connection states (byte 3) */
+#define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01
+#define SAS_DWS_TIMER_EXPIRED_CS 0x02
+#define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04
+#define SAS_PHY_DISABLED_CS 0x08
+#define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10
+#define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20
+#define SAS_DEVICE_SENT_ID_FRAME_CS 0x40
+#define SAS_DEVICE_SENT_REG_FIS_CS 0x40
+#define SAS_DEVICE_SENT_HARD_RESET_CS 0x80
+#define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\
+ SAS_DWS_TIMER_EXPIRED_CS |\
+ SAS_LINK_RESET_NOT_COMPLETE_CS|\
+ SAS_PHY_DISABLED_CS)
+
+#define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\
+ SAS_PHY_EVENT_TASK_ACTIVE_CS |\
+ SAS_DEVICE_SENT_ID_FRAME_CS |\
+ SAS_DEVICE_SENT_HARD_RESET_CS)
+
+#define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C)
+#define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E)
+#define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F)
+#define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192)
+#define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194)
+#define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196)
+#define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198)
+
+/* Mode independent scratch page 1 macros. */
+#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0)
+#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2)
+#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4)
+#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA)
+#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB)
+#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC)
+#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD)
+#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE)
+#define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8)
+#define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC)
+#define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE)
+
+/* Mode independent scratch page 2 macros. */
+#define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0)
+#define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2)
+#define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4)
+#define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6)
+#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8)
+#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9)
+#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA)
+#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB)
+#define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC)
+#define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD)
+#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE)
+#define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4)
+
+/* Mode independent scratch page 3 macros. */
+#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0)
+#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4)
+#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8)
+#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC)
+#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0)
+#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4)
+#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8)
+#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC)
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_SAS_H_
+#define _AIC94XX_SAS_H_
+
+#include <scsi/libsas.h>
+
+/* ---------- DDBs ---------- */
+/* DDBs are device descriptor blocks which describe a device in the
+ * domain that this sequencer can maintain low-level connections for
+ * us. They are be 64 bytes.
+ */
+
+struct asd_ddb_ssp_smp_target_port {
+ u8 conn_type; /* byte 0 */
+#define DDB_TP_CONN_TYPE 0x81 /* Initiator port and addr frame type 0x01 */
+
+ u8 conn_rate;
+ __be16 init_conn_tag;
+ u8 dest_sas_addr[8]; /* bytes 4-11 */
+
+ __le16 send_queue_head;
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_TARGET */
+#define DDB_TYPE_UNUSED 0xFF
+#define DDB_TYPE_TARGET 0xFE
+#define DDB_TYPE_INITIATOR 0xFD
+#define DDB_TYPE_PM_PORT 0xFC
+
+ __le16 _r_a;
+ __be16 awt_def;
+
+ u8 compat_features; /* byte 20 */
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time;
+ __be32 more_compat_features; /* byte 24 */
+
+ u8 conn_mask;
+ u8 flags; /* concurrent conn:2,2 and open:0(1) */
+#define CONCURRENT_CONN_SUPP 0x04
+#define OPEN_REQUIRED 0x01
+
+ u16 _r_b;
+ __le16 exec_queue_tail;
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+
+ __le16 _r_c;
+
+ u8 max_concurrent_conn;
+ u8 num_concurrent_conn;
+ u8 num_contexts;
+
+ u8 _r_d;
+
+ __le16 active_task_count;
+
+ u8 _r_e[9];
+
+ u8 itnl_reason; /* I_T nexus loss reason */
+
+ __le16 _r_f;
+
+ __le16 itnl_timeout;
+#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */
+
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+struct asd_ddb_stp_sata_target_port {
+ u8 conn_type; /* byte 0 */
+ u8 conn_rate;
+ __be16 init_conn_tag;
+ u8 dest_sas_addr[8]; /* bytes 4-11 */
+
+ __le16 send_queue_head;
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_TARGET */
+
+ __le16 _r_a;
+
+ __be16 awt_def;
+ u8 compat_features; /* byte 20 */
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time;
+ __be32 more_compat_features; /* byte 24 */
+
+ u8 conn_mask;
+ u8 flags; /* concurrent conn:2,2 and open:0(1) */
+#define SATA_MULTIPORT 0x80
+#define SUPPORTS_AFFIL 0x40
+#define STP_AFFIL_POL 0x20
+
+ u8 _r_b;
+ u8 flags2; /* STP close policy:0 */
+#define STP_CL_POL_NO_TX 0x00
+#define STP_CL_POL_BTW_CMDS 0x01
+
+ __le16 exec_queue_tail;
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+ __le16 ata_cmd_scbptr;
+ __le32 sata_tag_alloc_mask;
+ __le16 active_task_count;
+ __le16 _r_c;
+ __le32 sata_sactive;
+ u8 num_sata_tags;
+ u8 sata_status;
+ u8 sata_ending_status;
+ u8 itnl_reason; /* I_T nexus loss reason */
+ __le16 ncq_data_scb_ptr;
+ __le16 itnl_timeout;
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_init_port, describes the device descriptor block
+ * of an initiator port (when the sequencer is operating in target mode).
+ * Bytes [0,11] and [20,27] are from the OPEN address frame.
+ * The sequencer allocates an initiator port DDB entry.
+ */
+struct asd_ddb_init_port {
+ u8 conn_type; /* byte 0 */
+ u8 conn_rate;
+ __be16 init_conn_tag; /* BE */
+ u8 dest_sas_addr[8];
+ __le16 send_queue_head; /* LE, byte 12 */
+ u8 sq_suspended;
+ u8 ddb_type; /* DDB_TYPE_INITIATOR */
+ __le16 _r_a;
+ __be16 awt_def; /* BE */
+ u8 compat_features;
+ u8 pathway_blocked_count;
+ __be16 arb_wait_time; /* BE */
+ __be32 more_compat_features; /* BE */
+ u8 conn_mask;
+ u8 flags; /* == 5 */
+ u16 _r_b;
+ __le16 exec_queue_tail; /* execution queue tail */
+ __le16 send_queue_tail;
+ __le16 sister_ddb;
+ __le16 init_resp_timeout; /* initiator response timeout */
+ __le32 _r_c;
+ __le16 active_tasks; /* active task count */
+ __le16 init_list; /* initiator list link pointer */
+ __le32 _r_d;
+ u8 max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */
+ u8 itnl_reason; /* I_T nexus loss reason */
+ __le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */
+ __le16 itnl_to; /* from the Protocol Specific Port Ctrl MP */
+ __le32 itnl_timestamp;
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_tag, describes a look-up table to be used
+ * by the sequencers. SATA II, IDENTIFY DEVICE data, word 76, bit 8:
+ * NCQ support. This table is used by the sequencers to find the
+ * corresponding SCB, given a SATA II tag value.
+ */
+struct asd_ddb_sata_tag {
+ __le16 scb_pointer[32];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_table, describes a port number to
+ * connection handle look-up table. SATA targets attached to a port
+ * multiplier require a 4-bit port number value. There is one DDB
+ * entry of this type for each SATA port multiplier (sister DDB).
+ * Given a SATA PM port number, this table gives us the SATA PM Port
+ * DDB of the SATA port multiplier port (i.e. the SATA target
+ * discovered on the port).
+ */
+struct asd_ddb_sata_pm_table {
+ __le16 ddb_pointer[16];
+ __le16 _r_a[16];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier
+ * port format DDB.
+ */
+struct asd_ddb_sata_pm_port {
+ u8 _r_a[15];
+ u8 ddb_type;
+ u8 _r_b[13];
+ u8 pm_port_flags;
+#define PM_PORT_MASK 0xF0
+#define PM_PORT_SET 0x02
+ u8 _r_c[6];
+ __le16 sister_ddb;
+ __le16 ata_cmd_scbptr;
+ __le32 sata_tag_alloc_mask;
+ __le16 active_task_count;
+ __le16 parent_ddb;
+ __le32 sata_sactive;
+ u8 num_sata_tags;
+ u8 sata_status;
+ u8 sata_ending_status;
+ u8 _r_d[9];
+} __attribute__ ((packed));
+
+/* This struct asd_ddb_seq_shared, describes a DDB shared by the
+ * central and link sequencers. port_map_by_links is indexed phy
+ * number [0,7]; each byte is a bit mask of all the phys that are in
+ * the same port as the indexed phy.
+ */
+struct asd_ddb_seq_shared {
+ __le16 q_free_ddb_head;
+ __le16 q_free_ddb_tail;
+ __le16 q_free_ddb_cnt;
+ __le16 q_used_ddb_head;
+ __le16 q_used_ddb_tail;
+ __le16 shared_mem_lock;
+ __le16 smp_conn_tag;
+ __le16 est_nexus_buf_cnt;
+ __le16 est_nexus_buf_thresh;
+ u32 _r_a;
+ u8 settable_max_contexts;
+ u8 _r_b[23];
+ u8 conn_not_active;
+ u8 phy_is_up;
+ u8 _r_c[8];
+ u8 port_map_by_links[8];
+} __attribute__ ((packed));
+
+/* ---------- SG Element ---------- */
+
+/* This struct sg_el, describes the hardware scatter gather buffer
+ * element. All entries are little endian. In an SCB, there are 2 of
+ * this, plus one more, called a link element of this indicating a
+ * sublist if needed.
+ *
+ * A link element has only the bus address set and the flags (DS) bit
+ * valid. The bus address points to the start of the sublist.
+ *
+ * If a sublist is needed, then that sublist should also include the 2
+ * sg_el embedded in the SCB, in which case next_sg_offset is 32,
+ * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case.
+ */
+struct sg_el {
+ __le64 bus_addr;
+ __le32 size;
+ __le16 _r;
+ u8 next_sg_offs;
+ u8 flags;
+#define ASD_SG_EL_DS_MASK 0x30
+#define ASD_SG_EL_DS_OCM 0x10
+#define ASD_SG_EL_DS_HM 0x00
+#define ASD_SG_EL_LIST_MASK 0xC0
+#define ASD_SG_EL_LIST_EOL 0x40
+#define ASD_SG_EL_LIST_EOS 0x80
+} __attribute__ ((packed));
+
+/* ---------- SCBs ---------- */
+
+/* An SCB (sequencer control block) is comprised of a common header
+ * and a task part, for a total of 128 bytes. All fields are in LE
+ * order, unless otherwise noted.
+ */
+
+/* This struct scb_header, defines the SCB header format.
+ */
+struct scb_header {
+ __le64 next_scb;
+ __le16 index; /* transaction context */
+ u8 opcode;
+} __attribute__ ((packed));
+
+/* SCB opcodes: Execution queue
+ */
+#define INITIATE_SSP_TASK 0x00
+#define INITIATE_LONG_SSP_TASK 0x01
+#define INITIATE_BIDIR_SSP_TASK 0x02
+#define ABORT_TASK 0x03
+#define INITIATE_SSP_TMF 0x04
+#define SSP_TARG_GET_DATA 0x05
+#define SSP_TARG_GET_DATA_GOOD 0x06
+#define SSP_TARG_SEND_RESP 0x07
+#define QUERY_SSP_TASK 0x08
+#define INITIATE_ATA_TASK 0x09
+#define INITIATE_ATAPI_TASK 0x0a
+#define CONTROL_ATA_DEV 0x0b
+#define INITIATE_SMP_TASK 0x0c
+#define SMP_TARG_SEND_RESP 0x0f
+
+/* SCB opcodes: Send Queue
+ */
+#define SSP_TARG_SEND_DATA 0x40
+#define SSP_TARG_SEND_DATA_GOOD 0x41
+
+/* SCB opcodes: Link Queue
+ */
+#define CONTROL_PHY 0x80
+#define SEND_PRIMITIVE 0x81
+#define INITIATE_LINK_ADM_TASK 0x82
+
+/* SCB opcodes: other
+ */
+#define EMPTY_SCB 0xc0
+#define INITIATE_SEQ_ADM_TASK 0xc1
+#define EST_ICL_TARG_WINDOW 0xc2
+#define COPY_MEM 0xc3
+#define CLEAR_NEXUS 0xc4
+#define INITIATE_DDB_ADM_TASK 0xc6
+#define ESTABLISH_NEXUS_ESCB 0xd0
+
+#define LUN_SIZE 8
+
+/* See SAS spec, task IU
+ */
+struct ssp_task_iu {
+ u8 lun[LUN_SIZE]; /* BE */
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag; /* BE */
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
+/* See SAS spec, command IU
+ */
+struct ssp_command_iu {
+ u8 lun[LUN_SIZE];
+ u8 _r_a;
+ u8 efb_prio_attr; /* enable first burst, task prio & attr */
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
+
+ u8 _r_b;
+ u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
+ union {
+ u8 cdb[16];
+ struct {
+ __le64 long_cdb_addr; /* bus address, LE */
+ __le32 long_cdb_size; /* LE */
+ u8 _r_c[3];
+ u8 eol_ds; /* eol:6,6, ds:5,4 */
+ } long_cdb; /* sequencer extension */
+ };
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset; /* BE */
+ __be32 write_data_len; /* BE */
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+/* ---------- SCB tasks ---------- */
+
+/* This is both ssp_task and long_ssp_task
+ */
+struct initiate_ssp_task {
+ u8 proto_conn_rate; /* proto:6,4, conn_rate:3,0 */
+ __le32 total_xfer_len;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_command_iu ssp_cmd;
+ __le16 sister_scb; /* 0xFFFF */
+ __le16 conn_handle; /* index to DDB for the intended target */
+ u8 data_dir; /* :1,0 */
+#define DATA_DIR_NONE 0x00
+#define DATA_DIR_IN 0x01
+#define DATA_DIR_OUT 0x02
+#define DATA_DIR_BYRECIPIENT 0x03
+
+ u8 _r_a;
+ u8 retry_count;
+ u8 _r_b[5];
+ struct sg_el sg_element[3]; /* 2 real and 1 link */
+} __attribute__ ((packed));
+
+/* This defines both ata_task and atapi_task.
+ * ata: C bit of FIS should be 1,
+ * atapi: C bit of FIS should be 1, and command register should be 0xA0,
+ * to indicate a packet command.
+ */
+struct initiate_ata_task {
+ u8 proto_conn_rate;
+ __le32 total_xfer_len;
+ struct host_to_dev_fis fis;
+ __le32 data_offs;
+ u8 atapi_packet[16];
+ u8 _r_a[12];
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 ata_flags; /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */
+#define CSMI_TASK 0x40
+#define DATA_XFER_MODE_DMA 0x10
+#define ATA_Q_TYPE_MASK 0x08
+#define ATA_Q_TYPE_UNTAGGED 0x00
+#define ATA_Q_TYPE_NCQ 0x08
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c;
+ u8 flags;
+#define STP_AFFIL_POLICY 0x20
+#define SET_AFFIL_POLICY 0x10
+#define RET_PARTIAL_SGLIST 0x02
+
+ u8 _r_d[3];
+ struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+struct initiate_smp_task {
+ u8 proto_conn_rate;
+ u8 _r_a[40];
+ struct sg_el smp_req;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 _r_c[8];
+ struct sg_el smp_resp;
+ u8 _r_d[32];
+} __attribute__ ((packed));
+
+struct control_phy {
+ u8 phy_id;
+ u8 sub_func;
+#define DISABLE_PHY 0x00
+#define ENABLE_PHY 0x01
+#define RELEASE_SPINUP_HOLD 0x02
+#define ENABLE_PHY_NO_SAS_OOB 0x03
+#define ENABLE_PHY_NO_SATA_OOB 0x04
+#define PHY_NO_OP 0x05
+#define EXECUTE_HARD_RESET 0x81
+
+ u8 func_mask;
+ u8 speed_mask;
+ u8 hot_plug_delay;
+ u8 port_type;
+ u8 flags;
+#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01
+#define DISABLE_PHY_IF_OOB_FAILS 0x02
+
+ __le32 timeout_override;
+ u8 link_reset_retries;
+ u8 _r_a[47];
+ __le16 conn_handle;
+ u8 _r_b[56];
+} __attribute__ ((packed));
+
+struct control_ata_dev {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct host_to_dev_fis fis;
+ u8 _r_b[32];
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 ata_flags; /* 0 */
+ u8 _r_c[55];
+} __attribute__ ((packed));
+
+struct empty_scb {
+ u8 num_valid;
+ __le32 _r_a;
+#define ASD_EDBS_PER_SCB 7
+/* header+data+CRC+DMA suffix data */
+#define ASD_EDB_SIZE (24+1024+4+16)
+ struct sg_el eb[ASD_EDBS_PER_SCB];
+#define ELEMENT_NOT_VALID 0xC0
+} __attribute__ ((packed));
+
+struct initiate_link_adm {
+ u8 phy_id;
+ u8 sub_func;
+#define GET_LINK_ERROR_COUNT 0x00
+#define RESET_LINK_ERROR_COUNT 0x01
+#define ENABLE_NOTIFY_SPINUP_INTS 0x02
+
+ u8 _r_a[57];
+ __le16 conn_handle;
+ u8 _r_b[56];
+} __attribute__ ((packed));
+
+struct copy_memory {
+ u8 _r_a;
+ __le16 xfer_len;
+ __le16 _r_b;
+ __le64 src_busaddr;
+ u8 src_ds; /* See definition of sg_el */
+ u8 _r_c[45];
+ __le16 conn_handle;
+ __le64 _r_d;
+ __le64 dest_busaddr;
+ u8 dest_ds; /* See definition of sg_el */
+ u8 _r_e[39];
+} __attribute__ ((packed));
+
+struct abort_task {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_task_iu ssp_task;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
+#define SUSPEND_DATA_TRANS 0x04
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ __le16 index; /* Transaction context of task to be queried */
+ __le16 itnl_to;
+ u8 _r_d[44];
+} __attribute__ ((packed));
+
+struct clear_nexus {
+ u8 nexus;
+#define NEXUS_ADAPTER 0x00
+#define NEXUS_PORT 0x01
+#define NEXUS_I_T 0x02
+#define NEXUS_I_T_L 0x03
+#define NEXUS_TAG 0x04
+#define NEXUS_TRANS_CX 0x05
+#define NEXUS_SATA_TAG 0x06
+#define NEXUS_T_L 0x07
+#define NEXUS_L 0x08
+#define NEXUS_T_TAG 0x09
+
+ __le32 _r_a;
+ u8 flags;
+#define SUSPEND_TX 0x80
+#define RESUME_TX 0x40
+#define SEND_Q 0x04
+#define EXEC_Q 0x02
+#define NOTINQ 0x01
+
+ u8 _r_b[3];
+ u8 conn_mask;
+ u8 _r_c[19];
+ struct ssp_task_iu ssp_task; /* LUN and TAG */
+ __le16 _r_d;
+ __le16 conn_handle;
+ __le64 _r_e;
+ __le16 index; /* Transaction context of task to be cleared */
+ __le16 context; /* Clear nexus context */
+ u8 _r_f[44];
+} __attribute__ ((packed));
+
+struct initiate_ssp_tmf {
+ u8 proto_conn_rate;
+ __le32 _r_a;
+ struct ssp_frame_hdr ssp_frame;
+ struct ssp_task_iu ssp_task;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 flags; /* itnl override and suspend data tx */
+#define OVERRIDE_ITNL_TIMER 8
+
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ __le16 index; /* Transaction context of task to be queried */
+ __le16 itnl_to;
+ u8 _r_d[44];
+} __attribute__ ((packed));
+
+/* Transmits an arbitrary primitive on the link.
+ * Used for NOTIFY and BROADCAST.
+ */
+struct send_prim {
+ u8 phy_id;
+ u8 wait_transmit; /* :0,0 */
+ u8 xmit_flags;
+#define XMTPSIZE_MASK 0xF0
+#define XMTPSIZE_SINGLE 0x10
+#define XMTPSIZE_REPEATED 0x20
+#define XMTPSIZE_CONT 0x20
+#define XMTPSIZE_TRIPLE 0x30
+#define XMTPSIZE_REDUNDANT 0x60
+#define XMTPSIZE_INF 0
+
+#define XMTCONTEN 0x04
+#define XMTPFRM 0x02 /* Transmit at the next frame boundary */
+#define XMTPIMM 0x01 /* Transmit immediately */
+
+ __le16 _r_a;
+ u8 prim[4]; /* K, D0, D1, D2 */
+ u8 _r_b[50];
+ __le16 conn_handle;
+ u8 _r_c[56];
+} __attribute__ ((packed));
+
+/* This describes both SSP Target Get Data and SSP Target Get Data And
+ * Send Good Response SCBs. Used when the sequencer is operating in
+ * target mode...
+ */
+struct ssp_targ_get_data {
+ u8 proto_conn_rate;
+ __le32 total_xfer_len;
+ struct ssp_frame_hdr ssp_frame;
+ struct xfer_rdy_iu xfer_rdy;
+ u8 lun[LUN_SIZE];
+ __le64 _r_a;
+ __le16 sister_scb;
+ __le16 conn_handle;
+ u8 data_dir; /* 01b */
+ u8 _r_b;
+ u8 retry_count;
+ u8 _r_c[5];
+ struct sg_el sg_element[3];
+} __attribute__ ((packed));
+
+/* ---------- The actual SCB struct ---------- */
+
+struct scb {
+ struct scb_header header;
+ union {
+ struct initiate_ssp_task ssp_task;
+ struct initiate_ata_task ata_task;
+ struct initiate_smp_task smp_task;
+ struct control_phy control_phy;
+ struct control_ata_dev control_ata_dev;
+ struct empty_scb escb;
+ struct initiate_link_adm link_adm;
+ struct copy_memory cp_mem;
+ struct abort_task abort_task;
+ struct clear_nexus clear_nexus;
+ struct initiate_ssp_tmf ssp_tmf;
+ };
+} __attribute__ ((packed));
+
+/* ---------- Done List ---------- */
+/* The done list entry opcode field is defined below.
+ * The mnemonic encoding and meaning is as follows:
+ * TC - Task Complete, status was received and acknowledged
+ * TF - Task Failed, indicates an error prior to receiving acknowledgment
+ * for the command:
+ * - no conn,
+ * - NACK or R_ERR received in response to this command,
+ * - credit blocked or not available, or in the case of SMP request,
+ * - no SMP response was received.
+ * In these four cases it is known that the target didn't receive the
+ * command.
+ * TI - Task Interrupted, error after the command was acknowledged. It is
+ * known that the command was received by the target.
+ * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK
+ * (R_ERR) was received due to loss of signal, broken connection, loss of
+ * dword sync or other reason. The application client should send the
+ * appropriate task query.
+ * TA - Task Aborted, see TF.
+ * _RESP - The completion includes an empty buffer containing status.
+ * TO - Timeout.
+ */
+#define TC_NO_ERROR 0x00
+#define TC_UNDERRUN 0x01
+#define TC_OVERRUN 0x02
+#define TF_OPEN_TO 0x03
+#define TF_OPEN_REJECT 0x04
+#define TI_BREAK 0x05
+#define TI_PROTO_ERR 0x06
+#define TC_SSP_RESP 0x07
+#define TI_PHY_DOWN 0x08
+#define TF_PHY_DOWN 0x09
+#define TC_LINK_ADM_RESP 0x0a
+#define TC_CSMI 0x0b
+#define TC_ATA_RESP 0x0c
+#define TU_PHY_DOWN 0x0d
+#define TU_BREAK 0x0e
+#define TI_SATA_TO 0x0f
+#define TI_NAK 0x10
+#define TC_CONTROL_PHY 0x11
+#define TF_BREAK 0x12
+#define TC_RESUME 0x13
+#define TI_ACK_NAK_TO 0x14
+#define TF_SMPRSP_TO 0x15
+#define TF_SMP_XMIT_RCV_ERR 0x16
+#define TC_PARTIAL_SG_LIST 0x17
+#define TU_ACK_NAK_TO 0x18
+#define TU_SATA_TO 0x19
+#define TF_NAK_RECV 0x1a
+#define TA_I_T_NEXUS_LOSS 0x1b
+#define TC_ATA_R_ERR_RECV 0x1c
+#define TF_TMF_NO_CTX 0x1d
+#define TA_ON_REQ 0x1e
+#define TF_TMF_NO_TAG 0x1f
+#define TF_TMF_TAG_FREE 0x20
+#define TF_TMF_TASK_DONE 0x21
+#define TF_TMF_NO_CONN_HANDLE 0x22
+#define TC_TASK_CLEARED 0x23
+#define TI_SYNCS_RECV 0x24
+#define TU_SYNCS_RECV 0x25
+#define TF_IRTT_TO 0x26
+#define TF_NO_SMP_CONN 0x27
+#define TF_IU_SHORT 0x28
+#define TF_DATA_OFFS_ERR 0x29
+#define TF_INV_CONN_HANDLE 0x2a
+#define TF_REQUESTED_N_PENDING 0x2b
+
+/* 0xc1 - 0xc7: empty buffer received,
+ 0xd1 - 0xd7: establish nexus empty buffer received
+*/
+/* This is the ESCB mask */
+#define ESCB_RECVD 0xC0
+
+
+/* This struct done_list_struct defines the done list entry.
+ * All fields are LE.
+ */
+struct done_list_struct {
+ __le16 index; /* aka transaction context */
+ u8 opcode;
+ u8 status_block[4];
+ u8 toggle; /* bit 0 */
+#define DL_TOGGLE_MASK 0x01
+} __attribute__ ((packed));
+
+/* ---------- PHYS ---------- */
+
+struct asd_phy {
+ struct asd_sas_phy sas_phy;
+ struct asd_phy_desc *phy_desc; /* hw profile */
+
+ struct sas_identify_frame *identify_frame;
+ struct asd_dma_tok *id_frm_tok;
+
+ u8 frame_rcvd[ASD_EDB_SIZE];
+};
+
+
+#define ASD_SCB_SIZE sizeof(struct scb)
+#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port)
+
+/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent.
+ * Default: 0x10 (it's a mask)
+ */
+#define ASD_NOTIFY_ENABLE_SPINUP 0x10
+
+/* If enabled, set this to the interval between transmission
+ * of NOTIFY (ENABLE SPINUP). In units of 200 us.
+ */
+#define ASD_NOTIFY_TIMEOUT 2500
+
+/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP).
+ * If 0, transmit immediately. In milliseconds.
+ */
+#define ASD_NOTIFY_DOWN_COUNT 0
+
+/* Device present timer timeout constant, 10 ms. */
+#define ASD_DEV_PRESENT_TIMEOUT 0x2710
+
+#define ASD_SATA_INTERLOCK_TIMEOUT 0
+
+/* How long to wait before shutting down an STP connection, unless
+ * an STP target sent frame(s). 50 usec.
+ * IGNORED by the sequencer (i.e. value 0 always).
+ */
+#define ASD_STP_SHUTDOWN_TIMEOUT 0x0
+
+/* ATA soft reset timer timeout. 5 usec. */
+#define ASD_SRST_ASSERT_TIMEOUT 0x05
+
+/* 31 sec */
+#define ASD_RCV_FIS_TIMEOUT 0x01D905C0
+
+#define ASD_ONE_MILLISEC_TIMEOUT 0x03e8
+
+/* COMINIT timer */
+#define ASD_TEN_MILLISEC_TIMEOUT 0x2710
+#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT
+
+/* 1 sec */
+#define ASD_SMP_RCV_TIMEOUT 0x000F4240
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver SCB management.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+#include "aic94xx_dump.h"
+
+/* ---------- EMPTY SCB ---------- */
+
+#define DL_PHY_MASK 7
+#define BYTES_DMAED 0
+#define PRIMITIVE_RECVD 0x08
+#define PHY_EVENT 0x10
+#define LINK_RESET_ERROR 0x18
+#define TIMER_EVENT 0x20
+#define REQ_TASK_ABORT 0xF0
+#define REQ_DEVICE_RESET 0xF1
+#define SIGNAL_NCQ_ERROR 0xF2
+#define CLEAR_NCQ_ERROR 0xF3
+
+#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \
+ | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+ | CURRENT_OOB_ERROR)
+
+static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
+{
+ switch (oob_mode & 7) {
+ case PHY_SPEED_60:
+ /* FIXME: sas transport class doesn't have this */
+ phy->sas_phy.linkrate = PHY_LINKRATE_6;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ break;
+ case PHY_SPEED_30:
+ phy->sas_phy.linkrate = PHY_LINKRATE_3;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case PHY_SPEED_15:
+ phy->sas_phy.linkrate = PHY_LINKRATE_1_5;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ }
+ if (oob_mode & SAS_MODE)
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ else if (oob_mode & SATA_MODE)
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+}
+
+static inline void asd_phy_event_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ int phy_id = dl->status_block[0] & DL_PHY_MASK;
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+ u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS;
+ u8 oob_mode = dl->status_block[2];
+
+ switch (oob_status) {
+ case CURRENT_LOSS_OF_SIGNAL:
+ /* directly attached device was removed */
+ ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ break;
+ case CURRENT_OOB_DONE:
+ /* hot plugged device */
+ asd_turn_led(asd_ha, phy_id, 1);
+ get_lrate_mode(phy, oob_mode);
+ ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
+ phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ break;
+ case CURRENT_SPINUP_HOLD:
+ /* hot plug SATA, no COMWAKE sent */
+ asd_turn_led(asd_ha, phy_id, 1);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ break;
+ case CURRENT_GTO_TIMEOUT:
+ case CURRENT_OOB_ERROR:
+ ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id,
+ dl->status_block[1]);
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ break;
+ }
+}
+
+/* If phys are enabled sparsely, this will do the right thing. */
+static inline unsigned ord_phy(struct asd_ha_struct *asd_ha,
+ struct asd_phy *phy)
+{
+ u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
+ int i, k = 0;
+
+ for_each_phy(enabled_mask, enabled_mask, i) {
+ if (&asd_ha->phys[i] == phy)
+ return k;
+ k++;
+ }
+ return 0;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * phy: pointer to asd_phy
+ * sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received. If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
+{
+ if (phy->sas_phy.frame_rcvd[0] == 0x34
+ && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+ struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+ /* FIS device-to-host */
+ u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr);
+
+ addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy);
+ *(__be64 *)sas_addr = cpu_to_be64(addr);
+ } else {
+ struct sas_identify_frame *idframe =
+ (void *) phy->sas_phy.frame_rcvd;
+ memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int edb_id, int phy_id)
+{
+ unsigned long flags;
+ int edb_el = edb_id + ascb->edb_index;
+ struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el];
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+ struct sas_ha_struct *sas_ha = phy->sas_phy.ha;
+ u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2];
+
+ size = min(size, (u16) sizeof(phy->frame_rcvd));
+
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size);
+ phy->sas_phy.frame_rcvd_size = size;
+ asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ asd_dump_frame_rcvd(phy, dl);
+ sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+}
+
+static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ u8 lr_error = dl->status_block[1];
+ u8 retries_left = dl->status_block[2];
+
+ switch (lr_error) {
+ case 0:
+ ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id);
+ break;
+ case 1:
+ ASD_DPRINTK("phy%d: Loss of signal\n", phy_id);
+ break;
+ case 2:
+ ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id);
+ break;
+ case 3:
+ ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id);
+ break;
+ default:
+ ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
+ phy_id, lr_error);
+ break;
+ }
+
+ asd_turn_led(asd_ha, phy_id, 0);
+ sas_phy_disconnected(sas_phy);
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+
+ if (retries_left == 0) {
+ int num = 1;
+ struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
+ GFP_ATOMIC);
+ if (!cp) {
+ asd_printk("%s: out of memory\n", __FUNCTION__);
+ goto out;
+ }
+ ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
+ phy_id);
+ asd_build_control_phy(cp, phy_id, ENABLE_PHY);
+ if (asd_post_ascb_list(ascb->ha, cp, 1) != 0)
+ asd_ascb_free(cp);
+ }
+out:
+ ;
+}
+
+static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
+{
+ unsigned long flags;
+ struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ u8 reg = dl->status_block[1];
+ u32 cont = dl->status_block[2] << ((reg & 3)*8);
+
+ reg &= ~3;
+ switch (reg) {
+ case LmPRMSTAT0BYTE0:
+ switch (cont) {
+ case LmBROADCH:
+ case LmBROADRVCH0:
+ case LmBROADRVCH1:
+ case LmBROADSES:
+ ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
+ phy_id, cont);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = ffs(cont);
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
+ break;
+
+ case LmUNKNOWNP:
+ ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id);
+ break;
+
+ default:
+ ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+ phy_id, reg, cont);
+ break;
+ }
+ break;
+ case LmPRMSTAT1BYTE0:
+ switch (cont) {
+ case LmHARDRST:
+ ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
+ phy_id);
+ /* The sequencer disables all phys on that port.
+ * We have to re-enable the phys ourselves. */
+ sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+ break;
+
+ default:
+ ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+ phy_id, reg, cont);
+ break;
+ }
+ break;
+ default:
+ ASD_DPRINTK("unknown primitive register:0x%x\n",
+ dl->status_block[1]);
+ break;
+ }
+}
+
+/**
+ * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
+ * @ascb: pointer to Empty SCB
+ * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
+ *
+ * After an EDB has been invalidated, if all EDBs in this ESCB have been
+ * invalidated, the ESCB is posted back to the sequencer.
+ * Context is tasklet/IRQ.
+ */
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
+{
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ struct empty_scb *escb = &ascb->scb->escb;
+ struct sg_el *eb = &escb->eb[edb_id];
+ struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id];
+
+ memset(edb->vaddr, 0, ASD_EDB_SIZE);
+ eb->flags |= ELEMENT_NOT_VALID;
+ escb->num_valid--;
+
+ if (escb->num_valid == 0) {
+ int i;
+ /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
+ "dma_handle: 0x%08llx, next: 0x%08llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (u64)ascb->dma_scb.dma_handle,
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+ */
+ escb->num_valid = ASD_EDBS_PER_SCB;
+ for (i = 0; i < ASD_EDBS_PER_SCB; i++)
+ escb->eb[i].flags = 0;
+ if (!list_empty(&ascb->list))
+ list_del_init(&ascb->list);
+ i = asd_post_escb_list(ascb->ha, ascb, 1);
+ if (i)
+ asd_printk("couldn't post escb, err:%d\n", i);
+ }
+}
+
+static void escb_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */
+ u8 sb_opcode = dl->status_block[0];
+ int phy_id = sb_opcode & DL_PHY_MASK;
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+
+ if (edb > 6 || edb < 0) {
+ ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+ edb, dl->opcode);
+ ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+ sb_opcode, phy_id);
+ ASD_DPRINTK("escb: vaddr: 0x%p, "
+ "dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+ }
+
+ sb_opcode &= ~DL_PHY_MASK;
+
+ switch (sb_opcode) {
+ case BYTES_DMAED:
+ ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+ asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
+ break;
+ case PRIMITIVE_RECVD:
+ ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+ phy_id);
+ asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
+ break;
+ case PHY_EVENT:
+ ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+ asd_phy_event_tasklet(ascb, dl);
+ break;
+ case LINK_RESET_ERROR:
+ ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+ phy_id);
+ asd_link_reset_err_tasklet(ascb, dl, phy_id);
+ break;
+ case TIMER_EVENT:
+ ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
+ __FUNCTION__, phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ /* the device is gone */
+ sas_phy_disconnected(sas_phy);
+ sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+ break;
+ case REQ_TASK_ABORT:
+ ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__,
+ phy_id);
+ break;
+ case REQ_DEVICE_RESET:
+ ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__,
+ phy_id);
+ break;
+ case SIGNAL_NCQ_ERROR:
+ ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__,
+ phy_id);
+ break;
+ case CLEAR_NCQ_ERROR:
+ ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__,
+ phy_id);
+ break;
+ default:
+ ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+ phy_id, sb_opcode);
+ ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+ edb, dl->opcode);
+ ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+ sb_opcode, phy_id);
+ ASD_DPRINTK("escb: vaddr: 0x%p, "
+ "dma_handle: 0x%llx, next: 0x%llx, "
+ "index:%d, opcode:0x%02x\n",
+ ascb->dma_scb.vaddr,
+ (unsigned long long)ascb->dma_scb.dma_handle,
+ (unsigned long long)
+ le64_to_cpu(ascb->scb->header.next_scb),
+ le16_to_cpu(ascb->scb->header.index),
+ ascb->scb->header.opcode);
+
+ break;
+ }
+
+ asd_invalidate_edb(ascb, edb);
+}
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha)
+{
+ struct asd_seq_data *seq = &asd_ha->seq;
+ int i;
+
+ for (i = 0; i < seq->num_escbs; i++)
+ seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete;
+
+ ASD_DPRINTK("posting %d escbs\n", i);
+ return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \
+ | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+ | CURRENT_OOB_ERROR)
+
+/**
+ * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
+ * @ascb: pointer to an ascb
+ * @dl: pointer to the done list entry
+ *
+ * This function completes a CONTROL PHY scb and frees the ascb.
+ * A note on LEDs:
+ * - an LED blinks if there is IO though it,
+ * - if a device is connected to the LED, it is lit,
+ * - if no device is connected to the LED, is is dimmed (off).
+ */
+static void control_phy_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct scb *scb = ascb->scb;
+ struct control_phy *control_phy = &scb->control_phy;
+ u8 phy_id = control_phy->phy_id;
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+
+ u8 status = dl->status_block[0];
+ u8 oob_status = dl->status_block[1];
+ u8 oob_mode = dl->status_block[2];
+ /* u8 oob_signals= dl->status_block[3]; */
+
+ if (status != 0) {
+ ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
+ __FUNCTION__, phy_id, status);
+ goto out;
+ }
+
+ switch (control_phy->sub_func) {
+ case DISABLE_PHY:
+ asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ asd_control_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+ break;
+
+ case ENABLE_PHY:
+ asd_control_led(asd_ha, phy_id, 1);
+ if (oob_status & CURRENT_OOB_DONE) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ get_lrate_mode(phy, oob_mode);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
+ __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+ phy->sas_phy.iproto);
+ } else if (oob_status & CURRENT_SPINUP_HOLD) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+ phy_id);
+ } else if (oob_status & CURRENT_ERR_MASK) {
+ asd_turn_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
+ __FUNCTION__, phy_id, oob_status);
+ } else if (oob_status & (CURRENT_HOT_PLUG_CNCT
+ | CURRENT_DEVICE_PRESENT)) {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 1);
+ ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
+ __FUNCTION__, phy_id);
+ } else {
+ asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+ asd_turn_led(asd_ha, phy_id, 0);
+ ASD_DPRINTK("%s: phy%d: no device present: "
+ "oob_status:0x%x\n",
+ __FUNCTION__, phy_id, oob_status);
+ }
+ break;
+ case RELEASE_SPINUP_HOLD:
+ case PHY_NO_OP:
+ case EXECUTE_HARD_RESET:
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+ phy_id, control_phy->sub_func);
+ /* XXX finish */
+ break;
+ default:
+ ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+ phy_id, control_phy->sub_func);
+ break;
+ }
+out:
+ asd_ascb_free(ascb);
+}
+
+static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
+{
+ /* disable all speeds, then enable defaults */
+ *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
+ | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS;
+
+ switch (pd->max_sas_lrate) {
+ case PHY_LINKRATE_6:
+ *speed_mask &= ~SAS_SPEED_60_DIS;
+ default:
+ case PHY_LINKRATE_3:
+ *speed_mask &= ~SAS_SPEED_30_DIS;
+ case PHY_LINKRATE_1_5:
+ *speed_mask &= ~SAS_SPEED_15_DIS;
+ }
+
+ switch (pd->min_sas_lrate) {
+ case PHY_LINKRATE_6:
+ *speed_mask |= SAS_SPEED_30_DIS;
+ case PHY_LINKRATE_3:
+ *speed_mask |= SAS_SPEED_15_DIS;
+ default:
+ case PHY_LINKRATE_1_5:
+ /* nothing to do */
+ ;
+ }
+
+ switch (pd->max_sata_lrate) {
+ case PHY_LINKRATE_3:
+ *speed_mask &= ~SATA_SPEED_30_DIS;
+ default:
+ case PHY_LINKRATE_1_5:
+ *speed_mask &= ~SATA_SPEED_15_DIS;
+ }
+
+ switch (pd->min_sata_lrate) {
+ case PHY_LINKRATE_3:
+ *speed_mask |= SATA_SPEED_15_DIS;
+ default:
+ case PHY_LINKRATE_1_5:
+ /* nothing to do */
+ ;
+ }
+}
+
+/**
+ * asd_build_control_phy -- build a CONTROL PHY SCB
+ * @ascb: pointer to an ascb
+ * @phy_id: phy id to control, integer
+ * @subfunc: subfunction, what to actually to do the phy
+ *
+ * This function builds a CONTROL PHY scb. No allocation of any kind
+ * is performed. @ascb is allocated with the list function.
+ * The caller can override the ascb->tasklet_complete to point
+ * to its own callback function. It must call asd_ascb_free()
+ * at its tasklet complete function.
+ * See the default implementation.
+ */
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc)
+{
+ struct asd_phy *phy = &ascb->ha->phys[phy_id];
+ struct scb *scb = ascb->scb;
+ struct control_phy *control_phy = &scb->control_phy;
+
+ scb->header.opcode = CONTROL_PHY;
+ control_phy->phy_id = (u8) phy_id;
+ control_phy->sub_func = subfunc;
+
+ switch (subfunc) {
+ case EXECUTE_HARD_RESET: /* 0x81 */
+ case ENABLE_PHY: /* 0x01 */
+ /* decide hot plug delay */
+ control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT;
+
+ /* decide speed mask */
+ set_speed_mask(&control_phy->speed_mask, phy->phy_desc);
+
+ /* initiator port settings are in the hi nibble */
+ if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
+ control_phy->port_type = SAS_PROTO_ALL << 4;
+ else if (phy->sas_phy.role == PHY_ROLE_TARGET)
+ control_phy->port_type = SAS_PROTO_ALL;
+ else
+ control_phy->port_type =
+ (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+
+ /* link reset retries, this should be nominal */
+ control_phy->link_reset_retries = 10;
+
+ case RELEASE_SPINUP_HOLD: /* 0x02 */
+ /* decide the func_mask */
+ control_phy->func_mask = FUNCTION_MASK_DEFAULT;
+ if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD)
+ control_phy->func_mask &= ~SPINUP_HOLD_DIS;
+ else
+ control_phy->func_mask |= SPINUP_HOLD_DIS;
+ }
+
+ control_phy->conn_handle = cpu_to_le16(0xFFFF);
+
+ ascb->tasklet_complete = control_phy_tasklet_complete;
+}
+
+/* ---------- INITIATE LINK ADM TASK ---------- */
+
+static void link_adm_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ u8 opcode = dl->opcode;
+ struct initiate_link_adm *link_adm = &ascb->scb->link_adm;
+ u8 phy_id = link_adm->phy_id;
+
+ if (opcode != TC_NO_ERROR) {
+ asd_printk("phy%d: link adm task 0x%x completed with error "
+ "0x%x\n", phy_id, link_adm->sub_func, opcode);
+ }
+ ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
+ phy_id, link_adm->sub_func, opcode);
+
+ asd_ascb_free(ascb);
+}
+
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+ u8 subfunc)
+{
+ struct scb *scb = ascb->scb;
+ struct initiate_link_adm *link_adm = &scb->link_adm;
+
+ scb->header.opcode = INITIATE_LINK_ADM_TASK;
+
+ link_adm->phy_id = phy_id;
+ link_adm->sub_func = subfunc;
+ link_adm->conn_handle = cpu_to_le16(0xFFFF);
+
+ ascb->tasklet_complete = link_adm_tasklet_complete;
+}
+
+/* ---------- SCB timer ---------- */
+
+/**
+ * asd_ascb_timedout -- called when a pending SCB's timer has expired
+ * @data: unsigned long, a pointer to the ascb in question
+ *
+ * This is the default timeout function which does the most necessary.
+ * Upper layers can implement their own timeout function, say to free
+ * resources they have with this SCB, and then call this one at the
+ * end of their timeout function. To do this, one should initialize
+ * the ascb->timer.{function, data, expires} prior to calling the post
+ * funcion. The timer is started by the post function.
+ */
+void asd_ascb_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ unsigned long flags;
+
+ ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode);
+
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ seq->pending--;
+ list_del_init(&ascb->list);
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+
+ asd_ascb_free(ascb);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+/* Given the spec value, return a driver value. */
+static const int phy_func_table[] = {
+ [PHY_FUNC_NOP] = PHY_NO_OP,
+ [PHY_FUNC_LINK_RESET] = ENABLE_PHY,
+ [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET,
+ [PHY_FUNC_DISABLE] = DISABLE_PHY,
+ [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
+};
+
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func)
+{
+ struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ int res = 1;
+
+ if (func == PHY_FUNC_CLEAR_ERROR_LOG)
+ return -ENOSYS;
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+
+ asd_build_control_phy(ascb, phy->id, phy_func_table[func]);
+ res = asd_post_ascb_list(asd_ha, ascb , 1);
+ if (res)
+ asd_ascb_free(ascb);
+
+ return res;
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver access to shared data structures and memory
+ * maps.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+
+/* ---------- OCM stuff ---------- */
+
+struct asd_ocm_dir_ent {
+ u8 type;
+ u8 offs[3];
+ u8 _r1;
+ u8 size[3];
+} __attribute__ ((packed));
+
+struct asd_ocm_dir {
+ char sig[2];
+ u8 _r1[2];
+ u8 major; /* 0 */
+ u8 minor; /* 0 */
+ u8 _r2;
+ u8 num_de;
+ struct asd_ocm_dir_ent entry[15];
+} __attribute__ ((packed));
+
+#define OCM_DE_OCM_DIR 0x00
+#define OCM_DE_WIN_DRVR 0x01
+#define OCM_DE_BIOS_CHIM 0x02
+#define OCM_DE_RAID_ENGN 0x03
+#define OCM_DE_BIOS_INTL 0x04
+#define OCM_DE_BIOS_CHIM_OSM 0x05
+#define OCM_DE_BIOS_CHIM_DYNAMIC 0x06
+#define OCM_DE_ADDC2C_RES0 0x07
+#define OCM_DE_ADDC2C_RES1 0x08
+#define OCM_DE_ADDC2C_RES2 0x09
+#define OCM_DE_ADDC2C_RES3 0x0A
+
+#define OCM_INIT_DIR_ENTRIES 5
+/***************************************************************************
+* OCM dircetory default
+***************************************************************************/
+static struct asd_ocm_dir OCMDirInit =
+{
+ .sig = {0x4D, 0x4F}, /* signature */
+ .num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */
+};
+
+/***************************************************************************
+* OCM dircetory Entries default
+***************************************************************************/
+static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
+{
+ {
+ .type = (OCM_DE_ADDC2C_RES0), /* Entry type */
+ .offs = {128}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES1), /* Entry type */
+ .offs = {128, 4}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES2), /* Entry type */
+ .offs = {128, 8}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_ADDC2C_RES3), /* Entry type */
+ .offs = {128, 12}, /* Offset */
+ .size = {0, 4}, /* size */
+ },
+ {
+ .type = (OCM_DE_WIN_DRVR), /* Entry type */
+ .offs = {128, 16}, /* Offset */
+ .size = {128, 235, 1}, /* size */
+ },
+};
+
+struct asd_bios_chim_struct {
+ char sig[4];
+ u8 major; /* 1 */
+ u8 minor; /* 0 */
+ u8 bios_major;
+ u8 bios_minor;
+ __le32 bios_build;
+ u8 flags;
+ u8 pci_slot;
+ __le16 ue_num;
+ __le16 ue_size;
+ u8 _r[14];
+ /* The unit element array is right here.
+ */
+} __attribute__ ((packed));
+
+/**
+ * asd_read_ocm_seg - read an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to write the read data
+ * @offs: offset into OCM where to read from
+ * @size: how many bytes to read
+ *
+ * Return the number of bytes not read. Return 0 on success.
+ */
+static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+ u32 offs, int size)
+{
+ u8 *p = buffer;
+ if (unlikely(asd_ha->iospace))
+ asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+ else {
+ for ( ; size > 0; size--, offs++, p++)
+ *p = asd_read_ocm_byte(asd_ha, offs);
+ }
+ return size;
+}
+
+static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir, u32 offs)
+{
+ int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ return err;
+ }
+
+ if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
+ ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
+ dir->sig[0], dir->sig[1]);
+ return -ENOENT;
+ }
+ if (dir->major != 0) {
+ asd_printk("unsupported major version of ocm dir:0x%x\n",
+ dir->major);
+ return -ENOENT;
+ }
+ dir->num_de &= 0xf;
+ return 0;
+}
+
+/**
+ * asd_write_ocm_seg - write an on chip memory (OCM) segment
+ * @asd_ha: pointer to the host adapter structure
+ * @buffer: where to read the write data
+ * @offs: offset into OCM to write to
+ * @size: how many bytes to write
+ *
+ * Return the number of bytes not written. Return 0 on success.
+ */
+static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
+ u32 offs, int size)
+{
+ u8 *p = buffer;
+ if (unlikely(asd_ha->iospace))
+ asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
+ else {
+ for ( ; size > 0; size--, offs++, p++)
+ asd_write_ocm_byte(asd_ha, offs, *p);
+ }
+ return;
+}
+
+#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
+
+static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_ocm_dir_ent *ent;
+
+ for (i = 0; i < dir->num_de; i++) {
+ if (dir->entry[i].type == type)
+ break;
+ }
+ if (i >= dir->num_de)
+ return -ENOENT;
+ ent = &dir->entry[i];
+ *offs = (u32) THREE_TO_NUM(ent->offs);
+ *size = (u32) THREE_TO_NUM(ent->size);
+ return 0;
+}
+
+#define OCM_BIOS_CHIM_DE 2
+#define BC_BIOS_PRESENT 1
+
+static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
+ struct asd_ocm_dir *dir)
+{
+ int err;
+ struct asd_bios_chim_struct *bc_struct;
+ u32 offs, size;
+
+ err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
+ goto out;
+ }
+ err = -ENOMEM;
+ bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
+ if (!bc_struct) {
+ asd_printk("no memory for bios_chim struct\n");
+ goto out;
+ }
+ err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
+ sizeof(*bc_struct));
+ if (err) {
+ ASD_DPRINTK("couldn't read ocm segment\n");
+ goto out2;
+ }
+ if (strncmp(bc_struct->sig, "SOIB", 4)
+ && strncmp(bc_struct->sig, "IPSA", 4)) {
+ ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
+ bc_struct->sig[0], bc_struct->sig[1],
+ bc_struct->sig[2], bc_struct->sig[3]);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->major != 1) {
+ asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
+ bc_struct->major);
+ err = -ENOENT;
+ goto out2;
+ }
+ if (bc_struct->flags & BC_BIOS_PRESENT) {
+ asd_ha->hw_prof.bios.present = 1;
+ asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
+ asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
+ asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
+ ASD_DPRINTK("BIOS present (%d,%d), %d\n",
+ asd_ha->hw_prof.bios.maj,
+ asd_ha->hw_prof.bios.min,
+ asd_ha->hw_prof.bios.bld);
+ }
+ asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
+ asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
+ ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
+ asd_ha->hw_prof.ue.size);
+ size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
+ if (size > 0) {
+ err = -ENOMEM;
+ asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
+ if (!asd_ha->hw_prof.ue.area)
+ goto out2;
+ err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
+ offs + sizeof(*bc_struct), size);
+ if (err) {
+ kfree(asd_ha->hw_prof.ue.area);
+ asd_ha->hw_prof.ue.area = NULL;
+ asd_ha->hw_prof.ue.num = 0;
+ asd_ha->hw_prof.ue.size = 0;
+ ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
+ }
+ }
+out2:
+ kfree(bc_struct);
+out:
+ return err;
+}
+
+static void
+asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ /* Zero OCM */
+ for (i = 0; i < OCM_MAX_SIZE; i += 4)
+ asd_write_ocm_dword(asd_ha, i, 0);
+
+ /* Write Dir */
+ asd_write_ocm_seg(asd_ha, &OCMDirInit, 0,
+ sizeof(struct asd_ocm_dir));
+
+ /* Write Dir Entries */
+ for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++)
+ asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i],
+ sizeof(struct asd_ocm_dir) +
+ (i * sizeof(struct asd_ocm_dir_ent))
+ , sizeof(struct asd_ocm_dir_ent));
+
+}
+
+static int
+asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha)
+{
+ struct pci_dev *pcidev = asd_ha->pcidev;
+ u32 reg;
+ int err = 0;
+ u32 v;
+
+ /* check if OCM has been initialized by BIOS */
+ reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+ if (!(reg & OCMINITIALIZED)) {
+ err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v);
+ if (err) {
+ asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n",
+ pci_name(pcidev));
+ goto out;
+ }
+
+ printk(KERN_INFO "OCM is not initialized by BIOS,"
+ "reinitialize it and ignore it, current IntrptStatus"
+ "is 0x%x\n", v);
+
+ if (v)
+ err = pci_write_config_dword(pcidev,
+ PCIC_INTRPT_STAT, v);
+ if (err) {
+ asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n",
+ pci_name(pcidev));
+ goto out;
+ }
+
+ asd_hwi_initialize_ocm_dir(asd_ha);
+
+ }
+out:
+ return err;
+}
+
+/**
+ * asd_read_ocm - read on chip memory (OCM)
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_ocm(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_ocm_dir *dir;
+
+ if (asd_hwi_check_ocm_access(asd_ha))
+ return -1;
+
+ dir = kmalloc(sizeof(*dir), GFP_KERNEL);
+ if (!dir) {
+ asd_printk("no memory for ocm dir\n");
+ return -ENOMEM;
+ }
+
+ err = asd_read_ocm_dir(asd_ha, dir, 0);
+ if (err)
+ goto out;
+
+ err = asd_get_bios_chim(asd_ha, dir);
+out:
+ kfree(dir);
+ return err;
+}
+
+/* ---------- FLASH stuff ---------- */
+
+#define FLASH_RESET 0xF0
+#define FLASH_MANUF_AMD 1
+
+#define FLASH_SIZE 0x200000
+#define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** "
+#define FLASH_NEXT_ENTRY_OFFS 0x2000
+#define FLASH_MAX_DIR_ENTRIES 32
+
+#define FLASH_DE_TYPE_MASK 0x3FFFFFFF
+#define FLASH_DE_MS 0x120
+#define FLASH_DE_CTRL_A_USER 0xE0
+
+struct asd_flash_de {
+ __le32 type;
+ __le32 offs;
+ __le32 pad_size;
+ __le32 image_size;
+ __le32 chksum;
+ u8 _r[12];
+ u8 version[32];
+} __attribute__ ((packed));
+
+struct asd_flash_dir {
+ u8 cookie[32];
+ __le32 rev; /* 2 */
+ __le32 chksum;
+ __le32 chksum_antidote;
+ __le32 bld;
+ u8 bld_id[32]; /* build id data */
+ u8 ver_data[32]; /* date and time of build */
+ __le32 ae_mask;
+ __le32 v_mask;
+ __le32 oc_mask;
+ u8 _r[20];
+ struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
+} __attribute__ ((packed));
+
+struct asd_manuf_sec {
+ char sig[2]; /* 'S', 'M' */
+ u16 offs_next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ u16 chksum;
+ u16 size;
+ u8 _r[6];
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 pcba_sn[ASD_PCBA_SN_SIZE];
+ /* Here start the other segments */
+ u8 linked_list[0];
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_desc {
+ u8 state; /* low 4 bits */
+#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_REPORTED 1
+#define MS_PHY_STATE_HIDDEN 2
+ u8 phy_id;
+ u16 _r;
+ u8 phy_control_0; /* mode 5 reg 0x160 */
+ u8 phy_control_1; /* mode 5 reg 0x161 */
+ u8 phy_control_2; /* mode 5 reg 0x162 */
+ u8 phy_control_3; /* mode 5 reg 0x163 */
+} __attribute__ ((packed));
+
+struct asd_manuf_phy_param {
+ char sig[2]; /* 'P', 'M' */
+ u16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 2 */
+ u8 num_phy_desc; /* 8 */
+ u8 phy_desc_size; /* 8 */
+ u8 _r[3];
+ u8 usage_model_id;
+ u32 _r2;
+ struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_sb_type[] = {
+ "unknown",
+ "SGPIO",
+ [2 ... 0x7F] = "unknown",
+ [0x80] = "ADPT_I2C",
+ [0x81 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+#endif
+
+struct asd_ms_sb_desc {
+ u8 type;
+ u8 node_desc_index;
+ u8 conn_desc_index;
+ u8 _recvd[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_conn_type[] = {
+ [0 ... 7] = "unknown",
+ "SFF8470",
+ "SFF8482",
+ "SFF8484",
+ [0x80] = "PCIX_DAUGHTER0",
+ [0x81] = "SAS_DAUGHTER0",
+ [0x82 ... 0xFF] = "VENDOR_UNIQUExx"
+};
+
+static const char *asd_conn_location[] = {
+ "unknown",
+ "internal",
+ "external",
+ "board_to_board",
+};
+#endif
+
+struct asd_ms_conn_desc {
+ u8 type;
+ u8 location;
+ u8 num_sideband_desc;
+ u8 size_sideband_desc;
+ u32 _resvd;
+ u8 name[16];
+ struct asd_ms_sb_desc sb_desc[0];
+} __attribute__ ((packed));
+
+struct asd_nd_phy_desc {
+ u8 vp_attch_type;
+ u8 attch_specific[0];
+} __attribute__ ((packed));
+
+#if 0
+static const char *asd_node_type[] = {
+ "IOP",
+ "IO_CONTROLLER",
+ "EXPANDER",
+ "PORT_MULTIPLIER",
+ "PORT_MULTIPLEXER",
+ "MULTI_DROP_I2C_BUS",
+};
+#endif
+
+struct asd_ms_node_desc {
+ u8 type;
+ u8 num_phy_desc;
+ u8 size_phy_desc;
+ u8 _resvd;
+ u8 name[16];
+ struct asd_nd_phy_desc phy_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ms_conn_map {
+ char sig[2]; /* 'M', 'C' */
+ __le16 next;
+ u8 maj; /* 0 */
+ u8 min; /* 0 */
+ __le16 cm_size; /* size of this struct */
+ u8 num_conn;
+ u8 conn_size;
+ u8 num_nodes;
+ u8 usage_model_id;
+ u32 _resvd;
+ struct asd_ms_conn_desc conn_desc[0];
+ struct asd_ms_node_desc node_desc[0];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_entry {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 sas_link_rates; /* max in hi bits, min in low bits */
+ u8 flags;
+ u8 sata_link_rates;
+ u8 _r[5];
+} __attribute__ ((packed));
+
+struct asd_ctrla_phy_settings {
+ u8 id0; /* P'h'y */
+ u8 _r;
+ u16 next;
+ u8 num_phys; /* number of PHYs in the PCI function */
+ u8 _r2[3];
+ struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct asd_ll_el {
+ u8 id0;
+ u8 id1;
+ __le16 next;
+ u8 something_here[0];
+} __attribute__ ((packed));
+
+static int asd_poll_flash(struct asd_ha_struct *asd_ha)
+{
+ int c;
+ u8 d;
+
+ for (c = 5000; c > 0; c--) {
+ d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
+ if (!d)
+ return 0;
+ udelay(5);
+ }
+ return -ENOENT;
+}
+
+static int asd_reset_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_poll_flash(asd_ha);
+ if (err)
+ return err;
+ asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
+ err = asd_poll_flash(asd_ha);
+
+ return err;
+}
+
+static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
+ void *buffer, u32 offs, int size)
+{
+ asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
+ size);
+ return 0;
+}
+
+/**
+ * asd_find_flash_dir - finds and reads the flash directory
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to flash directory structure
+ *
+ * If found, the flash directory segment will be copied to
+ * @flash_dir. Return 1 if found, 0 if not.
+ */
+static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ u32 v;
+ for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(FLASH_DIR_COOKIE)-1);
+ if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
+ sizeof(FLASH_DIR_COOKIE)-1) == 0) {
+ asd_ha->hw_prof.flash.dir_offs = v;
+ asd_read_flash_seg(asd_ha, flash_dir, v,
+ sizeof(*flash_dir));
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int asd_flash_getid(struct asd_ha_struct *asd_ha)
+{
+ int err = 0;
+ u32 reg, inc;
+
+ reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
+
+ if (!(reg & FLASHEX)) {
+ ASD_DPRINTK("flash doesn't exist\n");
+ return -ENOENT;
+ }
+ if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
+ &asd_ha->hw_prof.flash.bar)) {
+ asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
+ pci_name(asd_ha->pcidev));
+ return -ENOENT;
+ }
+ asd_ha->hw_prof.flash.present = 1;
+ asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
+ err = asd_reset_flash(asd_ha);
+ if (err) {
+ ASD_DPRINTK("couldn't reset flash(%d)\n", err);
+ return err;
+ }
+ /* Get flash info. This would most likely be AMD Am29LV family flash.
+ * First try the sequence for word mode. It is the same as for
+ * 008B (byte mode only), 160B (word mode) and 800D (word mode).
+ */
+ reg = asd_ha->hw_prof.flash.bar;
+ inc = asd_ha->hw_prof.flash.wide ? 2 : 1;
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0xAA);
+ asd_write_reg_byte(asd_ha, reg + 0x2AA, 0x55);
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0x90);
+ asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+ asd_ha->hw_prof.flash.dev_id= asd_read_reg_byte(asd_ha,reg+inc);
+ asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha,reg+inc+inc);
+ /* Get out of autoselect mode. */
+ err = asd_reset_flash(asd_ha);
+
+ if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+ ASD_DPRINTK("0Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+ "sec_prot:%d\n",
+ asd_ha->hw_prof.flash.wide ? 16 : 8,
+ asd_ha->hw_prof.flash.manuf,
+ asd_ha->hw_prof.flash.dev_id,
+ asd_ha->hw_prof.flash.sec_prot);
+ return 0;
+ }
+
+ /* Ok, try the sequence for byte mode of 160B and 800D.
+ * We may actually never need this.
+ */
+ asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA);
+ asd_write_reg_byte(asd_ha, reg + 0x555, 0x55);
+ asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90);
+ asd_ha->hw_prof.flash.manuf = asd_read_reg_byte(asd_ha, reg);
+ asd_ha->hw_prof.flash.dev_id = asd_read_reg_byte(asd_ha, reg + 2);
+ asd_ha->hw_prof.flash.sec_prot = asd_read_reg_byte(asd_ha, reg + 4);
+ err = asd_reset_flash(asd_ha);
+
+ if (asd_ha->hw_prof.flash.manuf == FLASH_MANUF_AMD) {
+ ASD_DPRINTK("1Found FLASH(%d) manuf:%d, dev_id:0x%x, "
+ "sec_prot:%d\n",
+ asd_ha->hw_prof.flash.wide ? 16 : 8,
+ asd_ha->hw_prof.flash.manuf,
+ asd_ha->hw_prof.flash.dev_id,
+ asd_ha->hw_prof.flash.sec_prot);
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+static u16 asd_calc_flash_chksum(u16 *p, int size)
+{
+ u16 chksum = 0;
+
+ while (size-- > 0)
+ chksum += *p++;
+
+ return chksum;
+}
+
+
+static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
+ u32 *offs, u32 *size)
+{
+ int i;
+ struct asd_flash_de *de;
+
+ for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
+ u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
+
+ type &= FLASH_DE_TYPE_MASK;
+ if (type == entry_type)
+ break;
+ }
+ if (i >= FLASH_MAX_DIR_ENTRIES)
+ return -ENOENT;
+ de = &flash_dir->dir_entry[i];
+ *offs = le32_to_cpu(de->offs);
+ *size = le32_to_cpu(de->pad_size);
+ return 0;
+}
+
+static int asd_validate_ms(struct asd_manuf_sec *ms)
+{
+ if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
+ ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
+ ms->sig[0], ms->sig[1]);
+ return -ENOENT;
+ }
+ if (ms->maj != 0) {
+ asd_printk("unsupported manuf. sector. major version:%x\n",
+ ms->maj);
+ return -ENOENT;
+ }
+ ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
+ ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
+ ms->size = le16_to_cpu((__force __le16) ms->size);
+
+ if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
+ asd_printk("failed manuf sector checksum\n");
+ }
+
+ return 0;
+}
+
+static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
+ return 0;
+}
+
+static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *ms)
+{
+ memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
+ asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
+ return 0;
+}
+
+/**
+ * asd_find_ll_by_id - find a linked list entry by its id
+ * @start: void pointer to the first element in the linked list
+ * @id0: the first byte of the id (offs 0)
+ * @id1: the second byte of the id (offs 1)
+ *
+ * @start has to be the _base_ element start, since the
+ * linked list entries's offset is from this pointer.
+ * Some linked list entries use only the first id, in which case
+ * you can pass 0xFF for the second.
+ */
+static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
+{
+ struct asd_ll_el *el = start;
+
+ do {
+ switch (id1) {
+ default:
+ if (el->id1 == id1)
+ case 0xFF:
+ if (el->id0 == id0)
+ return el;
+ }
+ el = start + le16_to_cpu(el->next);
+ } while (el != start);
+
+ return NULL;
+}
+
+/**
+ * asd_ms_get_phy_params - get phy parameters from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @manuf_sec: pointer to the manufacturing sector
+ *
+ * The manufacturing sector contans also the linked list of sub-segments,
+ * since when it was read, its size was taken from the flash directory,
+ * not from the structure size.
+ *
+ * HIDDEN phys do not count in the total count. REPORTED phys cannot
+ * be enabled but are reported and counted towards the total.
+ * ENEBLEABLE phys are enabled by default and count towards the total.
+ * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
+ * merely specifies the number of phys the host adapter decided to
+ * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
+ * are actually enabled (enabled by default, max number of phys
+ * enableable in this case).
+ */
+static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ int i;
+ int en_phys = 0;
+ int rep_phys = 0;
+ struct asd_manuf_phy_param *phy_param;
+ struct asd_manuf_phy_param dflt_phy_param;
+
+ phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
+ if (!phy_param) {
+ ASD_DPRINTK("ms: no phy parameters found\n");
+ ASD_DPRINTK("ms: Creating default phy parameters\n");
+ dflt_phy_param.sig[0] = 'P';
+ dflt_phy_param.sig[1] = 'M';
+ dflt_phy_param.maj = 0;
+ dflt_phy_param.min = 2;
+ dflt_phy_param.num_phy_desc = 8;
+ dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc);
+ for (i =0; i < ASD_MAX_PHYS; i++) {
+ dflt_phy_param.phy_desc[i].state = 0;
+ dflt_phy_param.phy_desc[i].phy_id = i;
+ dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6;
+ dflt_phy_param.phy_desc[i].phy_control_1 = 0x10;
+ dflt_phy_param.phy_desc[i].phy_control_2 = 0x43;
+ dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb;
+ }
+
+ phy_param = &dflt_phy_param;
+
+ }
+
+ if (phy_param->maj != 0) {
+ asd_printk("unsupported manuf. phy param major version:0x%x\n",
+ phy_param->maj);
+ return -ENOENT;
+ }
+
+ ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
+ asd_ha->hw_prof.enabled_phys = 0;
+ for (i = 0; i < phy_param->num_phy_desc; i++) {
+ struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
+ switch (pd->state & 0xF) {
+ case MS_PHY_STATE_HIDDEN:
+ ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
+ continue;
+ case MS_PHY_STATE_REPORTED:
+ ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ rep_phys++;
+ continue;
+ case MS_PHY_STATE_ENABLEABLE:
+ ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+ asd_ha->hw_prof.enabled_phys |= (1 << i);
+ en_phys++;
+ break;
+ }
+ asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
+ asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
+ asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
+ asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
+ }
+ asd_ha->hw_prof.max_phys = rep_phys + en_phys;
+ asd_ha->hw_prof.num_phys = en_phys;
+ ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
+ asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
+ ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
+ return 0;
+}
+
+static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
+ struct asd_manuf_sec *manuf_sec)
+{
+ struct asd_ms_conn_map *cm;
+
+ cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
+ if (!cm) {
+ ASD_DPRINTK("ms: no connector map found\n");
+ return 0;
+ }
+
+ if (cm->maj != 0) {
+ ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
+ "\n", cm->maj);
+ return -ENOENT;
+ }
+
+ /* XXX */
+
+ return 0;
+}
+
+
+/**
+ * asd_process_ms - find and extract information from the manufacturing sector
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ms(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err;
+ struct asd_manuf_sec *manuf_sec;
+ u32 offs, size;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("Couldn't find the manuf. sector\n");
+ goto out;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ manuf_sec = kmalloc(size, GFP_KERNEL);
+ if (!manuf_sec) {
+ ASD_DPRINTK("no mem for manuf sector\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
+ offs, size);
+ goto out2;
+ }
+
+ err = asd_validate_ms(manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't validate manuf sector\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the SAS_ADDR\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
+ SAS_ADDR(asd_ha->hw_prof.sas_addr));
+
+ err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("couldn't read the PCBA SN\n");
+ goto out2;
+ }
+ ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
+
+ err = asd_ms_get_phy_params(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get phy parameters\n");
+ goto out2;
+ }
+
+ err = asd_ms_get_connector_map(asd_ha, manuf_sec);
+ if (err) {
+ ASD_DPRINTK("ms: couldn't get connector map\n");
+ goto out2;
+ }
+
+out2:
+ kfree(manuf_sec);
+out:
+ return err;
+}
+
+static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
+ struct asd_ctrla_phy_settings *ps)
+{
+ int i;
+ for (i = 0; i < ps->num_phys; i++) {
+ struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
+
+ if (!PHY_ENABLED(asd_ha, i))
+ continue;
+ if (*(u64 *)pe->sas_addr == 0) {
+ asd_ha->hw_prof.enabled_phys &= ~(1 << i);
+ continue;
+ }
+ /* This is the SAS address which should be sent in IDENTIFY. */
+ memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
+ SAS_ADDR_SIZE);
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
+ (pe->sas_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
+ (pe->sas_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
+ (pe->sata_link_rates & 0xF0) >> 4;
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
+ (pe->sata_link_rates & 0x0F);
+ asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
+ ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
+ " sata rate:0x%x-0x%x, flags:0x%x\n",
+ i,
+ SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
+ asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
+ asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
+ asd_ha->hw_prof.phy_desc[i].flags);
+ }
+
+ return 0;
+}
+
+/**
+ * asd_process_ctrl_a_user - process CTRL-A user settings
+ * @asd_ha: pointer to the host adapter structure
+ * @flash_dir: pointer to the flash directory
+ */
+static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
+ struct asd_flash_dir *flash_dir)
+{
+ int err, i;
+ u32 offs, size;
+ struct asd_ll_el *el;
+ struct asd_ctrla_phy_settings *ps;
+ struct asd_ctrla_phy_settings dflt_ps;
+
+ err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
+ if (err) {
+ ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
+ ASD_DPRINTK("Creating default CTRL-A user settings section\n");
+
+ dflt_ps.id0 = 'h';
+ dflt_ps.num_phys = 8;
+ for (i =0; i < ASD_MAX_PHYS; i++) {
+ memcpy(dflt_ps.phy_ent[i].sas_addr,
+ asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
+ dflt_ps.phy_ent[i].sas_link_rates = 0x98;
+ dflt_ps.phy_ent[i].flags = 0x0;
+ dflt_ps.phy_ent[i].sata_link_rates = 0x0;
+ }
+
+ size = sizeof(struct asd_ctrla_phy_settings);
+ ps = &dflt_ps;
+ }
+
+ if (size == 0)
+ goto out;
+
+ err = -ENOMEM;
+ el = kmalloc(size, GFP_KERNEL);
+ if (!el) {
+ ASD_DPRINTK("no mem for ctrla user settings section\n");
+ goto out;
+ }
+
+ err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
+ if (err) {
+ ASD_DPRINTK("couldn't read ctrla phy settings section\n");
+ goto out2;
+ }
+
+ err = -ENOENT;
+ ps = asd_find_ll_by_id(el, 'h', 0xFF);
+ if (!ps) {
+ ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
+ goto out2;
+ }
+
+ err = asd_process_ctrla_phy_settings(asd_ha, ps);
+ if (err) {
+ ASD_DPRINTK("couldn't process ctrla phy settings\n");
+ goto out2;
+ }
+out2:
+ kfree(el);
+out:
+ return err;
+}
+
+/**
+ * asd_read_flash - read flash memory
+ * @asd_ha: pointer to the host adapter structure
+ */
+int asd_read_flash(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ struct asd_flash_dir *flash_dir;
+
+ err = asd_flash_getid(asd_ha);
+ if (err)
+ return err;
+
+ flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
+ if (!flash_dir)
+ return -ENOMEM;
+
+ err = -ENOENT;
+ if (!asd_find_flash_dir(asd_ha, flash_dir)) {
+ ASD_DPRINTK("couldn't find flash directory\n");
+ goto out;
+ }
+
+ if (le32_to_cpu(flash_dir->rev) != 2) {
+ asd_printk("unsupported flash dir version:0x%x\n",
+ le32_to_cpu(flash_dir->rev));
+ goto out;
+ }
+
+ err = asd_process_ms(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process manuf sector settings\n");
+ goto out;
+ }
+
+ err = asd_process_ctrl_a_user(asd_ha, flash_dir);
+ if (err) {
+ ASD_DPRINTK("couldn't process CTRL-A user settings\n");
+ goto out;
+ }
+
+out:
+ kfree(flash_dir);
+ return err;
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver sequencer interface.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * Parts of this code adapted from David Chaw's adp94xx_seq.c.
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+
+#include "aic94xx_seq.h"
+#include "aic94xx_dump.h"
+
+/* It takes no more than 0.05 us for an instruction
+ * to complete. So waiting for 1 us should be more than
+ * plenty.
+ */
+#define PAUSE_DELAY 1
+#define PAUSE_TRIES 1000
+
+static const struct firmware *sequencer_fw;
+static const char *sequencer_version;
+static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
+ cseq_idle_loop, lseq_idle_loop;
+static u8 *cseq_code, *lseq_code;
+static u32 cseq_code_size, lseq_code_size;
+
+static u16 first_scb_site_no = 0xFFFF;
+static u16 last_scb_site_no;
+
+/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
+
+/**
+ * asd_pause_cseq - pause the central sequencer
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_cseq(struct asd_ha_struct *asd_ha)
+{
+ int count = PAUSE_TRIES;
+ u32 arp2ctl;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (arp2ctl & PAUSED)
+ return 0;
+
+ asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (arp2ctl & PAUSED)
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't pause CSEQ\n");
+ return -1;
+}
+
+/**
+ * asd_unpause_cseq - unpause the central sequencer.
+ * @asd_ha: pointer to host adapter structure.
+ *
+ * Return 0 on success, negative on error.
+ */
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (!(arp2ctl & PAUSED))
+ return 0;
+
+ asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
+ if (!(arp2ctl & PAUSED))
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't unpause the CSEQ\n");
+ return -1;
+}
+
+/**
+ * asd_seq_pause_lseq - pause a link sequencer
+ * @asd_ha: pointer to a host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (arp2ctl & PAUSED)
+ return 0;
+
+ asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (arp2ctl & PAUSED)
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
+ return -1;
+}
+
+/**
+ * asd_pause_lseq - pause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+ int err = 0;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_pause_lseq(asd_ha, lseq);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+/**
+ * asd_seq_unpause_lseq - unpause a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: link sequencer of interest
+ *
+ * Return 0 on success, negative on error.
+ */
+static inline int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u32 arp2ctl;
+ int count = PAUSE_TRIES;
+
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (!(arp2ctl & PAUSED))
+ return 0;
+
+ asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
+ do {
+ arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
+ if (!(arp2ctl & PAUSED))
+ return 0;
+ udelay(PAUSE_DELAY);
+ } while (--count > 0);
+
+ ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
+ return 0;
+}
+
+
+/**
+ * asd_unpause_lseq - unpause the link sequencer(s)
+ * @asd_ha: pointer to host adapter structure
+ * @lseq_mask: mask of link sequencers of interest
+ *
+ * Return 0 on success, negative on failure.
+ */
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
+{
+ int lseq;
+ int err = 0;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_unpause_lseq(asd_ha, lseq);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+/* ---------- Downloading CSEQ/LSEQ microcode ---------- */
+
+static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size)
+{
+ u32 addr = CSEQ_RAM_REG_BASE_ADR;
+ const u32 *prog = (u32 *) _prog;
+ u32 i;
+
+ for (i = 0; i < size; i += 4, prog++, addr += 4) {
+ u32 val = asd_read_reg_dword(asd_ha, addr);
+
+ if (le32_to_cpu(*prog) != val) {
+ asd_printk("%s: cseq verify failed at %u "
+ "read:0x%x, wanted:0x%x\n",
+ pci_name(asd_ha->pcidev),
+ i, val, le32_to_cpu(*prog));
+ return -1;
+ }
+ }
+ ASD_DPRINTK("verified %d bytes, passed\n", size);
+ return 0;
+}
+
+/**
+ * asd_verify_lseq - verify the microcode of a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @_prog: pointer to the microcode
+ * @size: size of the microcode in bytes
+ * @lseq: link sequencer of interest
+ *
+ * The link sequencer code is accessed in 4 KB pages, which are selected
+ * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
+ * The 10 KB LSEQm instruction code is mapped, page at a time, at
+ * LmSEQRAM address.
+ */
+static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size, int lseq)
+{
+#define LSEQ_CODEPAGE_SIZE 4096
+ int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
+ u32 page;
+ const u32 *prog = (u32 *) _prog;
+
+ for (page = 0; page < pages; page++) {
+ u32 i;
+
+ asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
+ page << LmRAMPAGE_LSHIFT);
+ for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
+ i += 4, prog++, size-=4) {
+
+ u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
+
+ if (le32_to_cpu(*prog) != val) {
+ asd_printk("%s: LSEQ%d verify failed "
+ "page:%d, offs:%d\n",
+ pci_name(asd_ha->pcidev),
+ lseq, page, i);
+ return -1;
+ }
+ }
+ }
+ ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
+ (int)((u8 *)prog-_prog));
+ return 0;
+}
+
+/**
+ * asd_verify_seq -- verify CSEQ/LSEQ microcode
+ * @asd_ha: pointer to host adapter structure
+ * @prog: pointer to microcode
+ * @size: size of the microcode
+ * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
+ *
+ * Return 0 if microcode is correct, negative on mismatch.
+ */
+static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
+ u32 size, u8 lseq_mask)
+{
+ if (lseq_mask == 0)
+ return asd_verify_cseq(asd_ha, prog, size);
+ else {
+ int lseq, err;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_verify_lseq(asd_ha, prog, size, lseq);
+ if (err)
+ return err;
+ }
+ }
+
+ return 0;
+}
+#define ASD_DMA_MODE_DOWNLOAD
+#ifdef ASD_DMA_MODE_DOWNLOAD
+/* This is the size of the CSEQ Mapped instruction page */
+#define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
+static int asd_download_seq(struct asd_ha_struct *asd_ha,
+ const u8 * const prog, u32 size, u8 lseq_mask)
+{
+ u32 comstaten;
+ u32 reg;
+ int page;
+ const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
+ struct asd_dma_tok *token;
+ int err = 0;
+
+ if (size % 4) {
+ asd_printk("sequencer program not multiple of 4\n");
+ return -1;
+ }
+
+ asd_pause_cseq(asd_ha);
+ asd_pause_lseq(asd_ha, 0xFF);
+
+ /* save, disable and clear interrupts */
+ comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
+ asd_write_reg_dword(asd_ha, COMSTATEN, 0);
+ asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
+
+ asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
+ asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
+
+ token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
+ if (!token) {
+ asd_printk("out of memory for dma SEQ download\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ ASD_DPRINTK("dma-ing %d bytes\n", size);
+
+ for (page = 0; page < pages; page++) {
+ int i;
+ u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
+ (u32)MAX_DMA_OVLY_COUNT);
+
+ memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
+ asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
+ asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
+ reg = !page ? RESETOVLYDMA : 0;
+ reg |= (STARTOVLYDMA | OVLYHALTERR);
+ reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+ /* Start DMA. */
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ for (i = PAUSE_TRIES*100; i > 0; i--) {
+ u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
+ if (!(dmadone & OVLYDMAACT))
+ break;
+ udelay(PAUSE_DELAY);
+ }
+ }
+
+ reg = asd_read_reg_dword(asd_ha, COMSTAT);
+ if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
+ || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
+ asd_printk("%s: error DMA-ing sequencer code\n",
+ pci_name(asd_ha->pcidev));
+ err = -ENODEV;
+ }
+
+ asd_free_coherent(asd_ha, token);
+ out:
+ asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
+
+ return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
+}
+#else /* ASD_DMA_MODE_DOWNLOAD */
+static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
+ u32 size, u8 lseq_mask)
+{
+ int i;
+ u32 reg = 0;
+ const u32 *prog = (u32 *) _prog;
+
+ if (size % 4) {
+ asd_printk("sequencer program not multiple of 4\n");
+ return -1;
+ }
+
+ asd_pause_cseq(asd_ha);
+ asd_pause_lseq(asd_ha, 0xFF);
+
+ reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
+ reg |= PIOCMODE;
+
+ asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
+ lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
+
+ for (i = 0; i < size; i += 4, prog++)
+ asd_write_reg_dword(asd_ha, SPIODATA, *prog);
+
+ reg = (reg & ~PIOCMODE) | OVLYHALTERR;
+ asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
+
+ return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
+}
+#endif /* ASD_DMA_MODE_DOWNLOAD */
+
+/**
+ * asd_seq_download_seqs - download the sequencer microcode
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Download the central and link sequencer microcode.
+ */
+static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ if (!asd_ha->hw_prof.enabled_phys) {
+ asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
+ return -ENODEV;
+ }
+
+ /* Download the CSEQ */
+ ASD_DPRINTK("downloading CSEQ...\n");
+ err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
+ if (err) {
+ asd_printk("CSEQ download failed:%d\n", err);
+ return err;
+ }
+
+ /* Download the Link Sequencers code. All of the Link Sequencers
+ * microcode can be downloaded at the same time.
+ */
+ ASD_DPRINTK("downloading LSEQs...\n");
+ err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
+ asd_ha->hw_prof.enabled_phys);
+ if (err) {
+ /* Try it one at a time */
+ u8 lseq;
+ u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
+
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_download_seq(asd_ha, lseq_code,
+ lseq_code_size, 1<<lseq);
+ if (err)
+ break;
+ }
+ }
+ if (err)
+ asd_printk("LSEQs download failed:%d\n", err);
+
+ return err;
+}
+
+/* ---------- Initializing the chip, chip memory, etc. ---------- */
+
+/**
+ * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
+{
+ /* CSEQ Mode Independent, page 4 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
+ asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
+ {
+ u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
+ u8 val = hweight8(con);
+ asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
+ }
+ asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
+
+ /* CSEQ Mode independent, page 5 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
+
+ /* CSEQ Mode independent, page 6 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
+ asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
+ asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
+ /* Calculate the free scb mask. */
+ {
+ u16 cmdctx = asd_get_cmdctx_size(asd_ha);
+ cmdctx = (~((cmdctx/128)-1)) >> 8;
+ asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
+ }
+ asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
+ first_scb_site_no);
+ asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
+ last_scb_site_no);
+ asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
+
+ /* CSEQ Mode independent, page 7 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
+ asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
+}
+
+/**
+ * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
+{
+ int i;
+ int moffs;
+
+ moffs = CSEQ_PAGE_SIZE * 2;
+
+ /* CSEQ Mode dependent, modes 0-7, page 0 setup. */
+ for (i = 0; i < 8; i++) {
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
+ asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
+ asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
+ }
+
+ /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
+
+ /* CSEQ Mode dependent, mode 8, page 0 setup. */
+ asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
+ asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
+ asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
+ asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
+ asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
+ asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
+ asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
+ asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
+ asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
+ asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
+ (u16)last_scb_site_no+1);
+ asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
+ (u16)asd_ha->hw_prof.max_ddbs);
+
+ /* CSEQ Mode dependent, mode 8, page 1 setup. */
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
+ asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
+
+ /* CSEQ Mode dependent, mode 8, page 2 setup. */
+ /* Tell the sequencer the bus address of the first SCB. */
+ asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
+ asd_ha->seq.next_scb.dma_handle);
+ ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
+ (unsigned long long)asd_ha->seq.next_scb.dma_handle);
+
+ /* Tell the sequencer the first Done List entry address. */
+ asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
+ asd_ha->seq.actual_dl->dma_handle);
+
+ /* Initialize the Q_DONE_POINTER with the least significant
+ * 4 bytes of the first Done List address. */
+ asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
+ ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
+
+ asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
+
+ /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
+}
+
+/**
+ * asd_init_cseq_scratch -- setup and init CSEQ
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Setup and initialize Central sequencers. Initialiaze the mode
+ * independent and dependent scratch page to the default settings.
+ */
+static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
+{
+ asd_init_cseq_mip(asd_ha);
+ asd_init_cseq_mdp(asd_ha);
+}
+
+/**
+ * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
+{
+ int i;
+
+ /* LSEQ Mode independent page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
+ asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
+ ASD_NOTIFY_ENABLE_SPINUP);
+ asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
+ asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
+
+ /* LSEQ Mode independent page 1 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
+
+ /* LSEQ Mode Independent page 2 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
+ for (i = 0; i < 12; i += 4)
+ asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
+
+ /* LSEQ Mode Independent page 3 setup. */
+
+ /* Device present timer timeout */
+ asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
+ ASD_DEV_PRESENT_TIMEOUT);
+
+ /* SATA interlock timer disabled */
+ asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
+ ASD_SATA_INTERLOCK_TIMEOUT);
+
+ /* STP shutdown timer timeout constant, IGNORED by the sequencer,
+ * always 0. */
+ asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
+ ASD_STP_SHUTDOWN_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
+ ASD_SRST_ASSERT_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
+ ASD_RCV_FIS_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
+ ASD_ONE_MILLISEC_TIMEOUT);
+
+ /* COM_INIT timer */
+ asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
+ ASD_TEN_MILLISEC_TIMEOUT);
+
+ asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
+ ASD_SMP_RCV_TIMEOUT);
+}
+
+/**
+ * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
+{
+ int i;
+ u32 moffs;
+ u16 ret_addr[] = {
+ 0xFFFF, /* mode 0 */
+ 0xFFFF, /* mode 1 */
+ mode2_task, /* mode 2 */
+ 0,
+ 0xFFFF, /* mode 4/5 */
+ 0xFFFF, /* mode 4/5 */
+ };
+
+ /*
+ * Mode 0,1,2 and 4/5 have common field on page 0 for the first
+ * 14 bytes.
+ */
+ for (i = 0; i < 3; i++) {
+ moffs = i * LSEQ_MODE_SCRATCH_SIZE;
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
+ ret_addr[i]);
+ asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
+ asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
+ asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
+ }
+ /*
+ * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
+ */
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
+ ret_addr[5]);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
+ asd_write_reg_byte(asd_ha,
+ LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
+ asd_write_reg_word(asd_ha,
+ LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
+
+ /* LSEQ Mode dependent 0, page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
+ (u16)asd_ha->hw_prof.max_ddbs);
+ asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
+ (u16)last_scb_site_no+1);
+ asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
+ (u16) LmM0INTEN_MASK & 0xFFFF0000 >> 16);
+ asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
+ (u16) LmM0INTEN_MASK & 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
+
+ /* LSEQ mode dependent, mode 1, page 0 setup. */
+ asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
+ asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
+
+ /* LSEQ Mode dependent mode 2, page 0 setup */
+ asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
+
+ /* LSEQ Mode dependent, mode 4/5, page 0 setup. */
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
+ /*
+ * Set the desired interval between transmissions of the NOTIFY
+ * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ */
+ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
+ ASD_NOTIFY_TIMEOUT - 1);
+ /* No delay for the first NOTIFY to be sent to the attached target. */
+ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
+ ASD_NOTIFY_DOWN_COUNT);
+
+ /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
+ for (i = 0; i < 2; i++) {
+ int j;
+ /* Start from Page 1 of Mode 0 and 1. */
+ moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
+ /* All the fields of page 1 can be intialized to 0. */
+ for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
+ asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
+ }
+
+ /* LSEQ Mode dependent, mode 2, page 1 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
+
+ /* LSEQ Mode dependent, mode 4/5, page 1. */
+ for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
+ asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
+ asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
+ asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
+
+ /* LSEQ Mode dependent, mode 0, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
+ asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
+ asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
+
+ /* LSEQ Mode Dependent 1, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
+
+ /* LSEQ Mode Dependent 2, page 2 setup. */
+ /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
+ * i.e. always 0. */
+ asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
+ asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
+ asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
+
+ /* LSEQ Mode Dependent 4/5, page 2 setup. */
+ asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
+ asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
+}
+
+/**
+ * asd_init_lseq_scratch -- setup and init link sequencers
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
+{
+ u8 lseq;
+ u8 lseq_mask;
+
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ asd_init_lseq_mip(asd_ha, lseq);
+ asd_init_lseq_mdp(asd_ha, lseq);
+ }
+}
+
+/**
+ * asd_init_scb_sites -- initialize sequencer SCB sites (memory).
+ * @asd_ha: pointer to host adapter structure
+ *
+ * This should be done before initializing common CSEQ and LSEQ
+ * scratch since those areas depend on some computed values here,
+ * last_scb_site_no, etc.
+ */
+static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
+{
+ u16 site_no;
+ u16 max_scbs = 0;
+
+ for (site_no = asd_ha->hw_prof.max_scbs-1;
+ site_no != (u16) -1;
+ site_no--) {
+ u16 i;
+
+ /* Initialize all fields in the SCB site to 0. */
+ for (i = 0; i < ASD_SCB_SIZE; i += 4)
+ asd_scbsite_write_dword(asd_ha, site_no, i, 0);
+
+ /* Workaround needed by SEQ to fix a SATA issue is to exclude
+ * certain SCB sites from the free list. */
+ if (!SCB_SITE_VALID(site_no))
+ continue;
+
+ if (last_scb_site_no == 0)
+ last_scb_site_no = site_no;
+
+ /* For every SCB site, we need to initialize the
+ * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
+ * and SG Element Flag. */
+
+ /* Q_NEXT field of the last SCB is invalidated. */
+ asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
+
+ /* Initialize SCB Site Opcode field to invalid. */
+ asd_scbsite_write_byte(asd_ha, site_no,
+ offsetof(struct scb_header, opcode),
+ 0xFF);
+
+ /* Initialize SCB Site Flags field to mean a response
+ * frame has been received. This means inadvertent
+ * frames received to be dropped. */
+ asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
+
+ first_scb_site_no = site_no;
+ max_scbs++;
+ }
+ asd_ha->hw_prof.max_scbs = max_scbs;
+ ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
+ ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
+ ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
+}
+
+/**
+ * asd_init_cseq_cio - initialize CSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
+ asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
+ asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
+ asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
+ asd_ha->seq.scbpro = 0;
+ asd_write_reg_dword(asd_ha, SCBPRO, 0);
+ asd_write_reg_dword(asd_ha, CSEQCON, 0);
+
+ /* Intialize CSEQ Mode 11 Interrupt Vectors.
+ * The addresses are 16 bit wide and in dword units.
+ * The values of their macros are in byte units.
+ * Thus we have to divide by 4. */
+ asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
+ asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
+ asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
+
+ /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+ asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
+
+ /* Initialize CSEQ Scratch Page to 0x04. */
+ asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
+
+ /* Initialize CSEQ Mode[0-8] Dependent registers. */
+ /* Initialize Scratch Page to 0. */
+ for (i = 0; i < 9; i++)
+ asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
+
+ /* Reset the ARP2 Program Count. */
+ asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+ for (i = 0; i < 8; i++) {
+ /* Intialize Mode n Link m Interrupt Enable. */
+ asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
+ /* Initialize Mode n Request Mailbox. */
+ asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
+ }
+}
+
+/**
+ * asd_init_lseq_cio -- initialize LmSEQ CIO registers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
+{
+ u8 *sas_addr;
+ int i;
+
+ /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
+ asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
+
+ asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
+
+ /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
+ for (i = 0; i < 3; i++)
+ asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
+
+ /* Initialize Mode 5 SCRATCHPAGE to 0. */
+ asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
+
+ asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
+ /* Initialize Mode 0,1,2 and 5 Interrupt Enable and
+ * Interrupt registers. */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
+ /* Mode 1 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
+ /* Mode 2 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
+ /* Mode 5 */
+ asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
+ asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
+
+ /* Enable HW Timer status. */
+ asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
+
+ /* Enable Primitive Status 0 and 1. */
+ asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
+ asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
+
+ /* Enable Frame Error. */
+ asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
+ asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
+
+ /* Initialize Mode 0 Transfer Level to 512. */
+ asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
+ /* Initialize Mode 1 Transfer Level to 256. */
+ asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
+
+ /* Initialize Program Count. */
+ asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+ /* Enable Blind SG Move. */
+ asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
+ asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
+ ASD_SATA_INTERLOCK_TIMEOUT);
+
+ (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
+
+ /* Clear Primitive Status 0 and 1. */
+ asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
+ asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
+
+ /* Clear HW Timer status. */
+ asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
+
+ /* Clear DMA Errors for Mode 0 and 1. */
+ asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
+ asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
+
+ /* Clear SG DMA Errors for Mode 0 and 1. */
+ asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
+ asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
+
+ /* Clear Mode 0 Buffer Parity Error. */
+ asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
+
+ /* Clear Mode 0 Frame Error register. */
+ asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
+
+ /* Reset LSEQ external interrupt arbiter. */
+ asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
+
+ /* Set the Phy SAS for the LmSEQ WWN. */
+ sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
+ for (i = 0; i < SAS_ADDR_SIZE; i++)
+ asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
+
+ /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
+ asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
+
+ /* Set the Bus Inactivity Time Limit Timer. */
+ asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
+
+ /* Enable SATA Port Multiplier. */
+ asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
+
+ /* Initialize Interrupt Vector[0-10] address in Mode 3.
+ * See the comment on CSEQ_INT_* */
+ asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
+ asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
+ /*
+ * Program the Link LED control, applicable only for
+ * Chip Rev. B or later.
+ */
+ asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
+ (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
+
+ /* Set the Align Rate for SAS and STP mode. */
+ asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
+ asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
+}
+
+
+/**
+ * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
+ * @asd_ha: pointer to host adapter struct
+ */
+static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
+ for (i = 0; i < 8; i++)
+ asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
+ /* Reset the external interrupt arbiter. */
+ asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
+}
+
+/**
+ * asd_init_ddb_0 -- initialize DDB 0
+ * @asd_ha: pointer to host adapter structure
+ *
+ * Initialize DDB site 0 which is used internally by the sequencer.
+ */
+static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ /* Zero out the DDB explicitly */
+ for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
+ asd_ddbsite_write_dword(asd_ha, 0, i, 0);
+
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
+ asd_ha->hw_prof.max_ddbs-1);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
+ asd_ddbsite_write_word(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
+ asd_ha->hw_prof.num_phys * 2);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
+ /* DDB 0 is reserved */
+ set_bit(0, asd_ha->hw_prof.ddb_bitmap);
+}
+
+/**
+ * asd_seq_setup_seqs -- setup and initialize central and link sequencers
+ * @asd_ha: pointer to host adapter structure
+ */
+static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
+{
+ int lseq;
+ u8 lseq_mask;
+
+ /* Initialize SCB sites. Done first to compute some values which
+ * the rest of the init code depends on. */
+ asd_init_scb_sites(asd_ha);
+
+ /* Initialize CSEQ Scratch RAM registers. */
+ asd_init_cseq_scratch(asd_ha);
+
+ /* Initialize LmSEQ Scratch RAM registers. */
+ asd_init_lseq_scratch(asd_ha);
+
+ /* Initialize CSEQ CIO registers. */
+ asd_init_cseq_cio(asd_ha);
+
+ asd_init_ddb_0(asd_ha);
+
+ /* Initialize LmSEQ CIO registers. */
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq)
+ asd_init_lseq_cio(asd_ha, lseq);
+ asd_post_init_cseq(asd_ha);
+}
+
+
+/**
+ * asd_seq_start_cseq -- start the central sequencer, CSEQ
+ * @asd_ha: pointer to host adapter structure
+ */
+static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
+{
+ /* Reset the ARP2 instruction to location zero. */
+ asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
+
+ /* Unpause the CSEQ */
+ return asd_unpause_cseq(asd_ha);
+}
+
+/**
+ * asd_seq_start_lseq -- start a link sequencer
+ * @asd_ha: pointer to host adapter structure
+ * @lseq: the link sequencer of interest
+ */
+static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
+{
+ /* Reset the ARP2 instruction to location zero. */
+ asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
+
+ /* Unpause the LmSEQ */
+ return asd_seq_unpause_lseq(asd_ha, lseq);
+}
+
+static int asd_request_firmware(struct asd_ha_struct *asd_ha)
+{
+ int err, i;
+ struct sequencer_file_header header, *hdr_ptr;
+ u32 csum = 0;
+ u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
+
+ if (sequencer_fw)
+ /* already loaded */
+ return 0;
+
+ err = request_firmware(&sequencer_fw,
+ SAS_RAZOR_SEQUENCER_FW_FILE,
+ &asd_ha->pcidev->dev);
+ if (err)
+ return err;
+
+ hdr_ptr = (struct sequencer_file_header *)sequencer_fw->data;
+
+ header.csum = le32_to_cpu(hdr_ptr->csum);
+ header.major = le32_to_cpu(hdr_ptr->major);
+ header.minor = le32_to_cpu(hdr_ptr->minor);
+ sequencer_version = hdr_ptr->version;
+ header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
+ header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
+ header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
+ header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
+ header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
+ header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
+ header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
+ header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
+ header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
+ header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
+ header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
+
+ for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
+ csum += sequencer_fw->data[i];
+
+ if (csum != header.csum) {
+ asd_printk("Firmware file checksum mismatch\n");
+ return -EINVAL;
+ }
+
+ if (header.cseq_table_size != CSEQ_NUM_VECS ||
+ header.lseq_table_size != LSEQ_NUM_VECS) {
+ asd_printk("Firmware file table size mismatch\n");
+ return -EINVAL;
+ }
+
+ ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
+ ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
+ mode2_task = header.mode2_task;
+ cseq_idle_loop = header.cseq_idle_loop;
+ lseq_idle_loop = header.lseq_idle_loop;
+
+ for (i = 0; i < CSEQ_NUM_VECS; i++)
+ cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
+
+ for (i = 0; i < LSEQ_NUM_VECS; i++)
+ lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
+
+ cseq_code = &sequencer_fw->data[header.cseq_code_offset];
+ cseq_code_size = header.cseq_code_size;
+ lseq_code = &sequencer_fw->data[header.lseq_code_offset];
+ lseq_code_size = header.lseq_code_size;
+
+ return 0;
+}
+
+int asd_init_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+
+ err = asd_request_firmware(asd_ha);
+
+ if (err) {
+ asd_printk("Failed to load sequencer firmware file %s, error %d\n",
+ SAS_RAZOR_SEQUENCER_FW_FILE, err);
+ return err;
+ }
+
+ asd_printk("using sequencer %s\n", sequencer_version);
+ err = asd_seq_download_seqs(asd_ha);
+ if (err) {
+ asd_printk("couldn't download sequencers for %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ asd_seq_setup_seqs(asd_ha);
+
+ return 0;
+}
+
+int asd_start_seqs(struct asd_ha_struct *asd_ha)
+{
+ int err;
+ u8 lseq_mask;
+ int lseq;
+
+ err = asd_seq_start_cseq(asd_ha);
+ if (err) {
+ asd_printk("couldn't start CSEQ for %s\n",
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+
+ lseq_mask = asd_ha->hw_prof.enabled_phys;
+ for_each_sequencer(lseq_mask, lseq_mask, lseq) {
+ err = asd_seq_start_lseq(asd_ha, lseq);
+ if (err) {
+ asd_printk("coudln't start LSEQ %d for %s\n", lseq,
+ pci_name(asd_ha->pcidev));
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * asd_update_port_links -- update port_map_by_links and phy_is_up
+ * @sas_phy: pointer to the phy which has been added to a port
+ *
+ * 1) When a link reset has completed and we got BYTES DMAED with a
+ * valid frame we call this function for that phy, to indicate that
+ * the phy is up, i.e. we update the phy_is_up in DDB 0. The
+ * sequencer checks phy_is_up when pending SCBs are to be sent, and
+ * when an open address frame has been received.
+ *
+ * 2) When we know of ports, we call this function to update the map
+ * of phys participaing in that port, i.e. we update the
+ * port_map_by_links in DDB 0. When a HARD_RESET primitive has been
+ * received, the sequencer disables all phys in that port.
+ * port_map_by_links is also used as the conn_mask byte in the
+ * initiator/target port DDB.
+ */
+void asd_update_port_links(struct asd_sas_phy *sas_phy)
+{
+ struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
+ const u8 phy_mask = (u8) sas_phy->port->phy_mask;
+ u8 phy_is_up;
+ u8 mask;
+ int i, err;
+
+ for_each_phy(phy_mask, mask, i)
+ asd_ddbsite_write_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared,
+ port_map_by_links)+i,phy_mask);
+
+ for (i = 0; i < 12; i++) {
+ phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up));
+ err = asd_ddbsite_update_byte(asd_ha, 0,
+ offsetof(struct asd_ddb_seq_shared, phy_is_up),
+ phy_is_up,
+ phy_is_up | phy_mask);
+ if (!err)
+ break;
+ else if (err == -EFAULT) {
+ asd_printk("phy_is_up: parity error in DDB 0\n");
+ break;
+ }
+ }
+
+ if (err)
+ asd_printk("couldn't update DDB 0:error:%d\n", err);
+}
--- /dev/null
+/*
+ * Aic94xx SAS/SATA driver sequencer interface header file.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef _AIC94XX_SEQ_H_
+#define _AIC94XX_SEQ_H_
+
+#define CSEQ_NUM_VECS 3
+#define LSEQ_NUM_VECS 11
+
+#define SAS_RAZOR_SEQUENCER_FW_FILE "aic94xx-seq.fw"
+
+/* Note: All quantites in the sequencer file are little endian */
+struct sequencer_file_header {
+ /* Checksum of the entire contents of the sequencer excluding
+ * these four bytes */
+ u32 csum;
+ /* numeric major version */
+ u32 major;
+ /* numeric minor version */
+ u32 minor;
+ /* version string printed by driver */
+ char version[16];
+ u32 cseq_table_offset;
+ u32 cseq_table_size;
+ u32 lseq_table_offset;
+ u32 lseq_table_size;
+ u32 cseq_code_offset;
+ u32 cseq_code_size;
+ u32 lseq_code_offset;
+ u32 lseq_code_size;
+ u16 mode2_task;
+ u16 cseq_idle_loop;
+ u16 lseq_idle_loop;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+int asd_pause_cseq(struct asd_ha_struct *asd_ha);
+int asd_unpause_cseq(struct asd_ha_struct *asd_ha);
+int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
+int asd_init_seqs(struct asd_ha_struct *asd_ha);
+int asd_start_seqs(struct asd_ha_struct *asd_ha);
+
+void asd_update_port_links(struct asd_sas_phy *phy);
+#endif
+
+#endif
--- /dev/null
+/*
+ * Aic94xx SAS/SATA Tasks
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a);
+static void asd_unbuild_smp_ascb(struct asd_ascb *a);
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a);
+
+static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ asd_ha->seq.can_queue += num;
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+}
+
+/* PCI_DMA_... to our direction translation.
+ */
+static const u8 data_dir_flags[] = {
+ [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */
+ [PCI_DMA_TODEVICE] = DATA_DIR_OUT, /* OUTBOUND */
+ [PCI_DMA_FROMDEVICE] = DATA_DIR_IN, /* INBOUND */
+ [PCI_DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */
+};
+
+static inline int asd_map_scatterlist(struct sas_task *task,
+ struct sg_el *sg_arr,
+ unsigned long gfp_flags)
+{
+ struct asd_ascb *ascb = task->lldd_task;
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct scatterlist *sc;
+ int num_sg, res;
+
+ if (task->data_dir == PCI_DMA_NONE)
+ return 0;
+
+ if (task->num_scatter == 0) {
+ void *p = task->scatter;
+ dma_addr_t dma = pci_map_single(asd_ha->pcidev, p,
+ task->total_xfer_len,
+ task->data_dir);
+ sg_arr[0].bus_addr = cpu_to_le64((u64)dma);
+ sg_arr[0].size = cpu_to_le32(task->total_xfer_len);
+ sg_arr[0].flags |= ASD_SG_EL_LIST_EOL;
+ return 0;
+ }
+
+ num_sg = pci_map_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+ if (num_sg == 0)
+ return -ENOMEM;
+
+ if (num_sg > 3) {
+ int i;
+
+ ascb->sg_arr = asd_alloc_coherent(asd_ha,
+ num_sg*sizeof(struct sg_el),
+ gfp_flags);
+ if (!ascb->sg_arr) {
+ res = -ENOMEM;
+ goto err_unmap;
+ }
+ for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+ struct sg_el *sg =
+ &((struct sg_el *)ascb->sg_arr->vaddr)[i];
+ sg->bus_addr = cpu_to_le64((u64)sg_dma_address(sc));
+ sg->size = cpu_to_le32((u32)sg_dma_len(sc));
+ if (i == num_sg-1)
+ sg->flags |= ASD_SG_EL_LIST_EOL;
+ }
+
+ for (sc = task->scatter, i = 0; i < 2; i++, sc++) {
+ sg_arr[i].bus_addr =
+ cpu_to_le64((u64)sg_dma_address(sc));
+ sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+ }
+ sg_arr[1].next_sg_offs = 2 * sizeof(*sg_arr);
+ sg_arr[1].flags |= ASD_SG_EL_LIST_EOS;
+
+ memset(&sg_arr[2], 0, sizeof(*sg_arr));
+ sg_arr[2].bus_addr=cpu_to_le64((u64)ascb->sg_arr->dma_handle);
+ } else {
+ int i;
+ for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) {
+ sg_arr[i].bus_addr =
+ cpu_to_le64((u64)sg_dma_address(sc));
+ sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc));
+ }
+ sg_arr[i-1].flags |= ASD_SG_EL_LIST_EOL;
+ }
+
+ return 0;
+err_unmap:
+ pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+ return res;
+}
+
+static inline void asd_unmap_scatterlist(struct asd_ascb *ascb)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_task *task = ascb->uldd_task;
+
+ if (task->data_dir == PCI_DMA_NONE)
+ return;
+
+ if (task->num_scatter == 0) {
+ dma_addr_t dma = (dma_addr_t)
+ le64_to_cpu(ascb->scb->ssp_task.sg_element[0].bus_addr);
+ pci_unmap_single(ascb->ha->pcidev, dma, task->total_xfer_len,
+ task->data_dir);
+ return;
+ }
+
+ asd_free_coherent(asd_ha, ascb->sg_arr);
+ pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter,
+ task->data_dir);
+}
+
+/* ---------- Task complete tasklet ---------- */
+
+static void asd_get_response_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_task *task = ascb->uldd_task;
+ struct task_status_struct *ts = &task->task_status;
+ unsigned long flags;
+ struct tc_resp_sb_struct {
+ __le16 index_escb;
+ u8 len_lsb;
+ u8 flags;
+ } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+/* int size = ((resp_sb->flags & 7) << 8) | resp_sb->len_lsb; */
+ int edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+ struct asd_ascb *escb;
+ struct asd_dma_tok *edb;
+ void *r;
+
+ spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+ escb = asd_tc_index_find(&asd_ha->seq,
+ (int)le16_to_cpu(resp_sb->index_escb));
+ spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+ if (!escb) {
+ ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+ return;
+ }
+
+ ts->buf_valid_size = 0;
+ edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+ r = edb->vaddr;
+ if (task->task_proto == SAS_PROTO_SSP) {
+ struct ssp_response_iu *iu =
+ r + 16 + sizeof(struct ssp_frame_hdr);
+
+ ts->residual = le32_to_cpu(*(__le32 *)r);
+ ts->resp = SAS_TASK_COMPLETE;
+ if (iu->datapres == 0)
+ ts->stat = iu->status;
+ else if (iu->datapres == 1)
+ ts->stat = iu->resp_data[3];
+ else if (iu->datapres == 2) {
+ ts->stat = SAM_CHECK_COND;
+ ts->buf_valid_size = min((u32) SAS_STATUS_BUF_SIZE,
+ be32_to_cpu(iu->sense_data_len));
+ memcpy(ts->buf, iu->sense_data, ts->buf_valid_size);
+ if (iu->status != SAM_CHECK_COND) {
+ ASD_DPRINTK("device %llx sent sense data, but "
+ "stat(0x%x) is not CHECK_CONDITION"
+ "\n",
+ SAS_ADDR(task->dev->sas_addr),
+ ts->stat);
+ }
+ }
+ } else {
+ struct ata_task_resp *resp = (void *) &ts->buf[0];
+
+ ts->residual = le32_to_cpu(*(__le32 *)r);
+
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
+ memcpy(&resp->ending_fis[0], r+16, 24);
+ ts->buf_valid_size = sizeof(*resp);
+ }
+ }
+
+ asd_invalidate_edb(escb, edb_id);
+}
+
+static void asd_task_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct sas_task *task = ascb->uldd_task;
+ struct task_status_struct *ts = &task->task_status;
+ unsigned long flags;
+ u8 opcode = dl->opcode;
+
+ asd_can_dequeue(ascb->ha, 1);
+
+Again:
+ switch (opcode) {
+ case TC_NO_ERROR:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ break;
+ case TC_UNDERRUN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = le32_to_cpu(*(__le32 *)dl->status_block);
+ break;
+ case TC_OVERRUN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ case TC_SSP_RESP:
+ case TC_ATA_RESP:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ asd_get_response_tasklet(ascb, dl);
+ break;
+ case TF_OPEN_REJECT:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ if (dl->status_block[1] & 2)
+ ts->open_rej_reason = 1 + dl->status_block[2];
+ else if (dl->status_block[1] & 1)
+ ts->open_rej_reason = (dl->status_block[2] >> 4)+10;
+ else
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case TF_OPEN_TO:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case TF_PHY_DOWN:
+ case TU_PHY_DOWN:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case TI_PHY_DOWN:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case TI_BREAK:
+ case TI_PROTO_ERR:
+ case TI_NAK:
+ case TI_ACK_NAK_TO:
+ case TF_SMP_XMIT_RCV_ERR:
+ case TC_ATA_R_ERR_RECV:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case TF_BREAK:
+ case TU_BREAK:
+ case TU_ACK_NAK_TO:
+ case TF_SMPRSP_TO:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case TF_NAK_RECV:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case TA_I_T_NEXUS_LOSS:
+ opcode = dl->status_block[0];
+ goto Again;
+ break;
+ case TF_INV_CONN_HANDLE:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEVICE_UNKNOWN;
+ break;
+ case TF_REQUESTED_N_PENDING:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PENDING;
+ break;
+ case TC_TASK_CLEARED:
+ case TA_ON_REQ:
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+
+ case TF_NO_SMP_CONN:
+ case TF_TMF_NO_CTX:
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE:
+ case TF_TMF_TASK_DONE:
+ case TF_TMF_NO_CONN_HANDLE:
+ case TF_IRTT_TO:
+ case TF_IU_SHORT:
+ case TF_DATA_OFFS_ERR:
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+
+ case TC_LINK_ADM_RESP:
+ case TC_CONTROL_PHY:
+ case TC_RESUME:
+ case TC_PARTIAL_SG_LIST:
+ default:
+ ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode);
+ break;
+ }
+
+ switch (task->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ asd_unbuild_ata_ascb(ascb);
+ break;
+ case SAS_PROTO_SMP:
+ asd_unbuild_smp_ascb(ascb);
+ break;
+ case SAS_PROTO_SSP:
+ asd_unbuild_ssp_ascb(ascb);
+ default:
+ break;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ task, opcode, ts->resp, ts->stat);
+ complete(&ascb->completion);
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ task->lldd_task = NULL;
+ asd_ascb_free(ascb);
+ mb();
+ task->task_done(task);
+ }
+}
+
+/* ---------- ATA ---------- */
+
+static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+ u8 flags;
+ int res = 0;
+
+ scb = ascb->scb;
+
+ if (unlikely(task->ata_task.device_control_reg_update))
+ scb->header.opcode = CONTROL_ATA_DEV;
+ else if (dev->sata_dev.command_set == ATA_COMMAND_SET)
+ scb->header.opcode = INITIATE_ATA_TASK;
+ else
+ scb->header.opcode = INITIATE_ATAPI_TASK;
+
+ scb->ata_task.proto_conn_rate = (1 << 5); /* STP */
+ if (dev->port->oob_mode == SAS_OOB_MODE)
+ scb->ata_task.proto_conn_rate |= dev->linkrate;
+
+ scb->ata_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+ scb->ata_task.fis = task->ata_task.fis;
+ scb->ata_task.fis.fis_type = 0x27;
+ if (likely(!task->ata_task.device_control_reg_update))
+ scb->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+ scb->ata_task.fis.flags &= 0xF0; /* PM_PORT field shall be 0 */
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+ memcpy(scb->ata_task.atapi_packet, task->ata_task.atapi_packet,
+ 16);
+ scb->ata_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ata_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)dev->lldd_dev);
+
+ if (likely(!task->ata_task.device_control_reg_update)) {
+ flags = 0;
+ if (task->ata_task.dma_xfer)
+ flags |= DATA_XFER_MODE_DMA;
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.command_set != ATAPI_COMMAND_SET)
+ flags |= ATA_Q_TYPE_NCQ;
+ flags |= data_dir_flags[task->data_dir];
+ scb->ata_task.ata_flags = flags;
+
+ scb->ata_task.retry_count = task->ata_task.retry_count;
+
+ flags = 0;
+ if (task->ata_task.set_affil_pol)
+ flags |= SET_AFFIL_POLICY;
+ if (task->ata_task.stp_affil_pol)
+ flags |= STP_AFFIL_POLICY;
+ scb->ata_task.flags = flags;
+ }
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ if (likely(!task->ata_task.device_control_reg_update))
+ res = asd_map_scatterlist(task, scb->ata_task.sg_element,
+ gfp_flags);
+
+ return res;
+}
+
+static void asd_unbuild_ata_ascb(struct asd_ascb *a)
+{
+ asd_unmap_scatterlist(a);
+}
+
+/* ---------- SMP ---------- */
+
+static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+
+ pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1,
+ PCI_DMA_FROMDEVICE);
+ pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+
+ scb = ascb->scb;
+
+ scb->header.opcode = INITIATE_SMP_TASK;
+
+ scb->smp_task.proto_conn_rate = dev->linkrate;
+
+ scb->smp_task.smp_req.bus_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ scb->smp_task.smp_req.size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+
+ scb->smp_task.smp_resp.bus_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+ scb->smp_task.smp_resp.size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+
+ scb->smp_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->smp_task.conn_handle = cpu_to_le16((u16)
+ (unsigned long)dev->lldd_dev);
+
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ return 0;
+}
+
+static void asd_unbuild_smp_ascb(struct asd_ascb *a)
+{
+ struct sas_task *task = a->uldd_task;
+
+ BUG_ON(!task);
+ pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+}
+
+/* ---------- SSP ---------- */
+
+static int asd_build_ssp_ascb(struct asd_ascb *ascb, struct sas_task *task,
+ unsigned long gfp_flags)
+{
+ struct domain_device *dev = task->dev;
+ struct scb *scb;
+ int res = 0;
+
+ scb = ascb->scb;
+
+ scb->header.opcode = INITIATE_SSP_TASK;
+
+ scb->ssp_task.proto_conn_rate = (1 << 4); /* SSP */
+ scb->ssp_task.proto_conn_rate |= dev->linkrate;
+ scb->ssp_task.total_xfer_len = cpu_to_le32(task->total_xfer_len);
+ scb->ssp_task.ssp_frame.frame_type = SSP_DATA;
+ memcpy(scb->ssp_task.ssp_frame.hashed_dest_addr, dev->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->ssp_task.ssp_frame.hashed_src_addr,
+ dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ scb->ssp_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+ memcpy(scb->ssp_task.ssp_cmd.lun, task->ssp_task.LUN, 8);
+ if (task->ssp_task.enable_first_burst)
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= EFB_MASK;
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+ scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(scb->ssp_task.ssp_cmd.cdb, task->ssp_task.cdb, 16);
+
+ scb->ssp_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ssp_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)dev->lldd_dev);
+ scb->ssp_task.data_dir = data_dir_flags[task->data_dir];
+ scb->ssp_task.retry_count = scb->ssp_task.retry_count;
+
+ ascb->tasklet_complete = asd_task_tasklet_complete;
+
+ res = asd_map_scatterlist(task, scb->ssp_task.sg_element, gfp_flags);
+
+ return res;
+}
+
+static void asd_unbuild_ssp_ascb(struct asd_ascb *a)
+{
+ asd_unmap_scatterlist(a);
+}
+
+/* ---------- Execute Task ---------- */
+
+static inline int asd_can_queue(struct asd_ha_struct *asd_ha, int num)
+{
+ int res = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
+ if ((asd_ha->seq.can_queue - num) < 0)
+ res = -SAS_QUEUE_FULL;
+ else
+ asd_ha->seq.can_queue -= num;
+ spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
+
+ return res;
+}
+
+int asd_execute_task(struct sas_task *task, const int num,
+ unsigned long gfp_flags)
+{
+ int res = 0;
+ LIST_HEAD(alist);
+ struct sas_task *t = task;
+ struct asd_ascb *ascb = NULL, *a;
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+
+ res = asd_can_queue(asd_ha, num);
+ if (res)
+ return res;
+
+ res = num;
+ ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags);
+ if (res) {
+ res = -ENOMEM;
+ goto out_err;
+ }
+
+ __list_add(&alist, ascb->list.prev, &ascb->list);
+ list_for_each_entry(a, &alist, list) {
+ a->uldd_task = t;
+ t->lldd_task = a;
+ t = list_entry(t->list.next, struct sas_task, list);
+ }
+ list_for_each_entry(a, &alist, list) {
+ t = a->uldd_task;
+ a->uldd_timer = 1;
+ if (t->task_proto & SAS_PROTO_STP)
+ t->task_proto = SAS_PROTO_STP;
+ switch (t->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ res = asd_build_ata_ascb(a, t, gfp_flags);
+ break;
+ case SAS_PROTO_SMP:
+ res = asd_build_smp_ascb(a, t, gfp_flags);
+ break;
+ case SAS_PROTO_SSP:
+ res = asd_build_ssp_ascb(a, t, gfp_flags);
+ break;
+ default:
+ asd_printk("unknown sas_task proto: 0x%x\n",
+ t->task_proto);
+ res = -ENOMEM;
+ break;
+ }
+ if (res)
+ goto out_err_unmap;
+ }
+ list_del_init(&alist);
+
+ res = asd_post_ascb_list(asd_ha, ascb, num);
+ if (unlikely(res)) {
+ a = NULL;
+ __list_add(&alist, ascb->list.prev, &ascb->list);
+ goto out_err_unmap;
+ }
+
+ return 0;
+out_err_unmap:
+ {
+ struct asd_ascb *b = a;
+ list_for_each_entry(a, &alist, list) {
+ if (a == b)
+ break;
+ t = a->uldd_task;
+ switch (t->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ asd_unbuild_ata_ascb(a);
+ break;
+ case SAS_PROTO_SMP:
+ asd_unbuild_smp_ascb(a);
+ break;
+ case SAS_PROTO_SSP:
+ asd_unbuild_ssp_ascb(a);
+ default:
+ break;
+ }
+ t->lldd_task = NULL;
+ }
+ }
+ list_del_init(&alist);
+out_err:
+ if (ascb)
+ asd_ascb_free_list(ascb);
+ asd_can_dequeue(asd_ha, num);
+ return res;
+}
--- /dev/null
+/*
+ * Aic94xx Task Management Functions
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/spinlock.h>
+#include "aic94xx.h"
+#include "aic94xx_sas.h"
+#include "aic94xx_hwi.h"
+
+/* ---------- Internal enqueue ---------- */
+
+static int asd_enqueue_internal(struct asd_ascb *ascb,
+ void (*tasklet_complete)(struct asd_ascb *,
+ struct done_list_struct *),
+ void (*timed_out)(unsigned long))
+{
+ int res;
+
+ ascb->tasklet_complete = tasklet_complete;
+ ascb->uldd_timer = 1;
+
+ ascb->timer.data = (unsigned long) ascb;
+ ascb->timer.function = timed_out;
+ ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
+
+ add_timer(&ascb->timer);
+
+ res = asd_post_ascb_list(ascb->ha, ascb, 1);
+ if (unlikely(res))
+ del_timer(&ascb->timer);
+ return res;
+}
+
+static inline void asd_timedout_common(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+ struct asd_seq_data *seq = &ascb->ha->seq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&seq->pend_q_lock, flags);
+ seq->pending--;
+ list_del_init(&ascb->list);
+ spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+}
+
+/* ---------- CLEAR NEXUS ---------- */
+
+static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ ASD_DPRINTK("%s: here\n", __FUNCTION__);
+ if (!del_timer(&ascb->timer)) {
+ ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
+ return;
+ }
+ ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
+ ascb->uldd_task = (void *) (unsigned long) dl->opcode;
+ complete(&ascb->completion);
+}
+
+static void asd_clear_nexus_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+
+ ASD_DPRINTK("%s: here\n", __FUNCTION__);
+ asd_timedout_common(data);
+ ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+ complete(&ascb->completion);
+}
+
+#define CLEAR_NEXUS_PRE \
+ ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
+ res = 1; \
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
+ if (!ascb) \
+ return -ENOMEM; \
+ \
+ scb = ascb->scb; \
+ scb->header.opcode = CLEAR_NEXUS
+
+#define CLEAR_NEXUS_POST \
+ ASD_DPRINTK("%s: POST\n", __FUNCTION__); \
+ res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \
+ asd_clear_nexus_timedout); \
+ if (res) \
+ goto out_err; \
+ ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
+ wait_for_completion(&ascb->completion); \
+ res = (int) (unsigned long) ascb->uldd_task; \
+ if (res == TC_NO_ERROR) \
+ res = TMF_RESP_FUNC_COMPLETE; \
+out_err: \
+ asd_ascb_free(ascb); \
+ return res
+
+int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha)
+{
+ struct asd_ha_struct *asd_ha = sas_ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_ADAPTER;
+ CLEAR_NEXUS_POST;
+}
+
+int asd_clear_nexus_port(struct asd_sas_port *port)
+{
+ struct asd_ha_struct *asd_ha = port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_PORT;
+ scb->clear_nexus.conn_mask = port->phy_mask;
+ CLEAR_NEXUS_POST;
+}
+
+#if 0
+static int asd_clear_nexus_I_T(struct domain_device *dev)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_I_T;
+ scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ if (dev->tproto)
+ scb->clear_nexus.flags |= SUSPEND_TX;
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+#endif
+
+static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_I_T_L;
+ scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ if (dev->tproto)
+ scb->clear_nexus.flags |= SUSPEND_TX;
+ memcpy(scb->clear_nexus.ssp_task.lun, lun, 8);
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_tag(struct sas_task *task)
+{
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_TAG;
+ memcpy(scb->clear_nexus.ssp_task.lun, task->ssp_task.LUN, 8);
+ scb->clear_nexus.ssp_task.tag = tascb->tag;
+ if (task->dev->tproto)
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ task->dev->lldd_dev);
+ CLEAR_NEXUS_POST;
+}
+
+static int asd_clear_nexus_index(struct sas_task *task)
+{
+ struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ascb *ascb;
+ struct scb *scb;
+ int res;
+
+ CLEAR_NEXUS_PRE;
+ scb->clear_nexus.nexus = NEXUS_TRANS_CX;
+ if (task->dev->tproto)
+ scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
+ task->dev->lldd_dev);
+ scb->clear_nexus.index = cpu_to_le16(tascb->tc_index);
+ CLEAR_NEXUS_POST;
+}
+
+/* ---------- TMFs ---------- */
+
+static void asd_tmf_timedout(unsigned long data)
+{
+ struct asd_ascb *ascb = (void *) data;
+
+ ASD_DPRINTK("tmf timed out\n");
+ asd_timedout_common(data);
+ ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
+ complete(&ascb->completion);
+}
+
+static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ unsigned long flags;
+ struct tc_resp_sb_struct {
+ __le16 index_escb;
+ u8 len_lsb;
+ u8 flags;
+ } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block;
+
+ int edb_id = ((resp_sb->flags & 0x70) >> 4)-1;
+ struct asd_ascb *escb;
+ struct asd_dma_tok *edb;
+ struct ssp_frame_hdr *fh;
+ struct ssp_response_iu *ru;
+ int res = TMF_RESP_FUNC_FAILED;
+
+ ASD_DPRINTK("tmf resp tasklet\n");
+
+ spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags);
+ escb = asd_tc_index_find(&asd_ha->seq,
+ (int)le16_to_cpu(resp_sb->index_escb));
+ spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags);
+
+ if (!escb) {
+ ASD_DPRINTK("Uh-oh! No escb for this dl?!\n");
+ return res;
+ }
+
+ edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index];
+ ascb->tag = *(__be16 *)(edb->vaddr+4);
+ fh = edb->vaddr + 16;
+ ru = edb->vaddr + 16 + sizeof(*fh);
+ res = ru->status;
+ if (ru->datapres == 1) /* Response data present */
+ res = ru->resp_data[3];
+#if 0
+ ascb->tag = fh->tag;
+#endif
+ ascb->tag_valid = 1;
+
+ asd_invalidate_edb(escb, edb_id);
+ return res;
+}
+
+static void asd_tmf_tasklet_complete(struct asd_ascb *ascb,
+ struct done_list_struct *dl)
+{
+ if (!del_timer(&ascb->timer))
+ return;
+
+ ASD_DPRINTK("tmf tasklet complete\n");
+
+ if (dl->opcode == TC_SSP_RESP)
+ ascb->uldd_task = (void *) (unsigned long)
+ asd_get_tmf_resp_tasklet(ascb, dl);
+ else
+ ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode;
+
+ complete(&ascb->completion);
+}
+
+static inline int asd_clear_nexus(struct sas_task *task)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct asd_ascb *tascb = task->lldd_task;
+ unsigned long flags;
+
+ ASD_DPRINTK("task not done, clearing nexus\n");
+ if (tascb->tag_valid)
+ res = asd_clear_nexus_tag(task);
+ else
+ res = asd_clear_nexus_index(task);
+ wait_for_completion_timeout(&tascb->completion,
+ AIC94XX_SCB_TIMEOUT);
+ ASD_DPRINTK("came back from clear nexus\n");
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return res;
+}
+
+/**
+ * asd_abort_task -- ABORT TASK TMF
+ * @task: the task to be aborted
+ *
+ * Before calling ABORT TASK the task state flags should be ORed with
+ * SAS_TASK_STATE_ABORTED (unless SAS_TASK_STATE_DONE is set) under
+ * the task_state_lock IRQ spinlock, then ABORT TASK *must* be called.
+ *
+ * Implements the ABORT TASK TMF, I_T_L_Q nexus.
+ * Returns: SAS TMF responses (see sas_task.h),
+ * -ENOMEM,
+ * -SAS_QUEUE_FULL.
+ *
+ * When ABORT TASK returns, the caller of ABORT TASK checks first the
+ * task->task_state_flags, and then the return value of ABORT TASK.
+ *
+ * If the task has task state bit SAS_TASK_STATE_DONE set, then the
+ * task was completed successfully prior to it being aborted. The
+ * caller of ABORT TASK has responsibility to call task->task_done()
+ * xor free the task, depending on their framework. The return code
+ * is TMF_RESP_FUNC_FAILED in this case.
+ *
+ * Else the SAS_TASK_STATE_DONE bit is not set,
+ * If the return code is TMF_RESP_FUNC_COMPLETE, then
+ * the task was aborted successfully. The caller of
+ * ABORT TASK has responsibility to call task->task_done()
+ * to finish the task, xor free the task depending on their
+ * framework.
+ * else
+ * the ABORT TASK returned some kind of error. The task
+ * was _not_ cancelled. Nothing can be assumed.
+ * The caller of ABORT TASK may wish to retry.
+ */
+int asd_abort_task(struct sas_task *task)
+{
+ struct asd_ascb *tascb = task->lldd_task;
+ struct asd_ha_struct *asd_ha = tascb->ha;
+ int res = 1;
+ unsigned long flags;
+ struct asd_ascb *ascb = NULL;
+ struct scb *scb;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ res = TMF_RESP_FUNC_COMPLETE;
+ ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+ goto out_done;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+ scb = ascb->scb;
+
+ scb->header.opcode = ABORT_TASK;
+
+ switch (task->task_proto) {
+ case SATA_PROTO:
+ case SAS_PROTO_STP:
+ scb->abort_task.proto_conn_rate = (1 << 5); /* STP */
+ break;
+ case SAS_PROTO_SSP:
+ scb->abort_task.proto_conn_rate = (1 << 4); /* SSP */
+ scb->abort_task.proto_conn_rate |= task->dev->linkrate;
+ break;
+ case SAS_PROTO_SMP:
+ break;
+ default:
+ break;
+ }
+
+ if (task->task_proto == SAS_PROTO_SSP) {
+ scb->abort_task.ssp_frame.frame_type = SSP_TASK;
+ memcpy(scb->abort_task.ssp_frame.hashed_dest_addr,
+ task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->abort_task.ssp_frame.hashed_src_addr,
+ task->dev->port->ha->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ scb->abort_task.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+
+ memcpy(scb->abort_task.ssp_task.lun, task->ssp_task.LUN, 8);
+ scb->abort_task.ssp_task.tmf = TMF_ABORT_TASK;
+ scb->abort_task.ssp_task.tag = cpu_to_be16(0xFFFF);
+ }
+
+ scb->abort_task.sister_scb = cpu_to_le16(0xFFFF);
+ scb->abort_task.conn_handle = cpu_to_le16(
+ (u16)(unsigned long)task->dev->lldd_dev);
+ scb->abort_task.retry_count = 1;
+ scb->abort_task.index = cpu_to_le16((u16)tascb->tc_index);
+ scb->abort_task.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+
+ res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+ asd_tmf_timedout);
+ if (res)
+ goto out;
+ wait_for_completion(&ascb->completion);
+ ASD_DPRINTK("tmf came back\n");
+
+ res = (int) (unsigned long) ascb->uldd_task;
+ tascb->tag = ascb->tag;
+ tascb->tag_valid = ascb->tag_valid;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ res = TMF_RESP_FUNC_COMPLETE;
+ ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task);
+ goto out_done;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ switch (res) {
+ /* The task to be aborted has been sent to the device.
+ * We got a Response IU for the ABORT TASK TMF. */
+ case TC_NO_ERROR + 0xFF00:
+ case TMF_RESP_FUNC_COMPLETE:
+ case TMF_RESP_FUNC_FAILED:
+ res = asd_clear_nexus(task);
+ break;
+ case TMF_RESP_INVALID_FRAME:
+ case TMF_RESP_OVERLAPPED_TAG:
+ case TMF_RESP_FUNC_ESUPP:
+ case TMF_RESP_NO_LUN:
+ goto out_done; break;
+ }
+ /* In the following we assume that the managing layer
+ * will _never_ make a mistake, when issuing ABORT TASK.
+ */
+ switch (res) {
+ default:
+ res = asd_clear_nexus(task);
+ /* fallthrough */
+ case TC_NO_ERROR + 0xFF00:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ /* The task hasn't been sent to the device xor we never got
+ * a (sane) Response IU for the ABORT TASK TMF.
+ */
+ case TF_NAK_RECV + 0xFF00:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */
+ res = TMF_RESP_FUNC_FAILED;
+ wait_for_completion_timeout(&tascb->completion,
+ AIC94XX_SCB_TIMEOUT);
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ goto out_done;
+ case TF_TMF_NO_TAG + 0xFF00:
+ case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ res = TMF_RESP_FUNC_COMPLETE;
+ goto out_done;
+ case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ goto out;
+ }
+out_done:
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ task->lldd_task = NULL;
+ mb();
+ asd_ascb_free(tascb);
+ }
+out:
+ asd_ascb_free(ascb);
+ ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
+ return res;
+}
+
+/**
+ * asd_initiate_ssp_tmf -- send a TMF to an I_T_L or I_T_L_Q nexus
+ * @dev: pointer to struct domain_device of interest
+ * @lun: pointer to u8[8] which is the LUN
+ * @tmf: the TMF to be performed (see sas_task.h or the SAS spec)
+ * @index: the transaction context of the task to be queried if QT TMF
+ *
+ * This function is used to send ABORT TASK SET, CLEAR ACA,
+ * CLEAR TASK SET, LU RESET and QUERY TASK TMFs.
+ *
+ * No SCBs should be queued to the I_T_L nexus when this SCB is
+ * pending.
+ *
+ * Returns: TMF response code (see sas_task.h or the SAS spec)
+ */
+static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun,
+ int tmf, int index)
+{
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ struct asd_ascb *ascb;
+ int res = 1;
+ struct scb *scb;
+
+ if (!(dev->tproto & SAS_PROTO_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+ if (!ascb)
+ return -ENOMEM;
+ scb = ascb->scb;
+
+ if (tmf == TMF_QUERY_TASK)
+ scb->header.opcode = QUERY_SSP_TASK;
+ else
+ scb->header.opcode = INITIATE_SSP_TMF;
+
+ scb->ssp_tmf.proto_conn_rate = (1 << 4); /* SSP */
+ scb->ssp_tmf.proto_conn_rate |= dev->linkrate;
+ /* SSP frame header */
+ scb->ssp_tmf.ssp_frame.frame_type = SSP_TASK;
+ memcpy(scb->ssp_tmf.ssp_frame.hashed_dest_addr,
+ dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ memcpy(scb->ssp_tmf.ssp_frame.hashed_src_addr,
+ dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ scb->ssp_tmf.ssp_frame.tptt = cpu_to_be16(0xFFFF);
+ /* SSP Task IU */
+ memcpy(scb->ssp_tmf.ssp_task.lun, lun, 8);
+ scb->ssp_tmf.ssp_task.tmf = tmf;
+
+ scb->ssp_tmf.sister_scb = cpu_to_le16(0xFFFF);
+ scb->ssp_tmf.conn_handle= cpu_to_le16((u16)(unsigned long)
+ dev->lldd_dev);
+ scb->ssp_tmf.retry_count = 1;
+ scb->ssp_tmf.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST);
+ if (tmf == TMF_QUERY_TASK)
+ scb->ssp_tmf.index = cpu_to_le16(index);
+
+ res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
+ asd_tmf_timedout);
+ if (res)
+ goto out_err;
+ wait_for_completion(&ascb->completion);
+ res = (int) (unsigned long) ascb->uldd_task;
+
+ switch (res) {
+ case TC_NO_ERROR + 0xFF00:
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ case TF_NAK_RECV + 0xFF00:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE + 0xFF00:
+ res = TMF_RESP_FUNC_FAILED;
+ break;
+ case TF_TMF_NO_TAG + 0xFF00:
+ case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ break;
+ default:
+ ASD_DPRINTK("%s: converting result 0x%x to TMF_RESP_FUNC_FAILED\n",
+ __FUNCTION__, res);
+ res = TMF_RESP_FUNC_FAILED;
+ break;
+ }
+out_err:
+ asd_ascb_free(ascb);
+ return res;
+}
+
+int asd_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_ABORT_TASK_SET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_clear_aca(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_ACA, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_TASK_SET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+int asd_lu_reset(struct domain_device *dev, u8 *lun)
+{
+ int res = asd_initiate_ssp_tmf(dev, lun, TMF_LU_RESET, 0);
+
+ if (res == TMF_RESP_FUNC_COMPLETE)
+ asd_clear_nexus_I_T_L(dev, lun);
+ return res;
+}
+
+/**
+ * asd_query_task -- send a QUERY TASK TMF to an I_T_L_Q nexus
+ * task: pointer to sas_task struct of interest
+ *
+ * Returns: TMF_RESP_FUNC_COMPLETE if the task is not in the task set,
+ * or TMF_RESP_FUNC_SUCC if the task is in the task set.
+ *
+ * Normally the management layer sets the task to aborted state,
+ * and then calls query task and then abort task.
+ */
+int asd_query_task(struct sas_task *task)
+{
+ struct asd_ascb *ascb = task->lldd_task;
+ int index;
+
+ if (ascb) {
+ index = ascb->tc_index;
+ return asd_initiate_ssp_tmf(task->dev, task->ssp_task.LUN,
+ TMF_QUERY_TASK, index);
+ }
+ return TMF_RESP_FUNC_COMPLETE;
+}
--- /dev/null
+#
+# Kernel configuration file for the SAS Class
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+
+config SCSI_SAS_LIBSAS
+ tristate "SAS Domain Transport Attributes"
+ depends on SCSI
+ select SCSI_SAS_ATTRS
+ help
+ This provides transport specific helpers for SAS drivers which
+ use the domain device construct (like the aic94xxx).
+
+config SCSI_SAS_LIBSAS_DEBUG
+ bool "Compile the SAS Domain Transport Attributes in debug mode"
+ default y
+ depends on SCSI_SAS_LIBSAS
+ help
+ Compiles the SAS Layer in debug mode. In debug mode, the
+ SAS Layer prints diagnostic and debug messages.
--- /dev/null
+#
+# Kernel Makefile for the libsas helpers
+#
+# Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
+ EXTRA_CFLAGS += -DSAS_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
+libsas-y += sas_init.o \
+ sas_phy.o \
+ sas_port.o \
+ sas_event.o \
+ sas_dump.o \
+ sas_discover.o \
+ sas_expander.o \
+ sas_scsi_host.o
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Discover process
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Basic task processing for discovery purposes ---------- */
+
+void sas_init_dev(struct domain_device *dev)
+{
+ INIT_LIST_HEAD(&dev->siblings);
+ INIT_LIST_HEAD(&dev->dev_list_node);
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ INIT_LIST_HEAD(&dev->ex_dev.children);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ case SATA_PM_PORT:
+ INIT_LIST_HEAD(&dev->sata_dev.children);
+ break;
+ default:
+ break;
+ }
+}
+
+static void sas_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct scatterlist *scatter = NULL;
+ struct task_status_struct *ts = &task->task_status;
+ int num_scatter = 0;
+ int retries = 0;
+ struct sas_internal *i =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+ if (pci_dma_dir != PCI_DMA_NONE) {
+ scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
+ if (!scatter)
+ goto out;
+
+ sg_init_one(scatter, buffer, size);
+ num_scatter = 1;
+ }
+
+ task->task_proto = task->dev->tproto;
+ task->scatter = scatter;
+ task->num_scatter = num_scatter;
+ task->total_xfer_len = size;
+ task->data_dir = pci_dma_dir;
+ task->task_done = sas_disc_task_done;
+
+ for (retries = 0; retries < 5; retries++) {
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_completion(&task->completion);
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = sas_task_timedout;
+ task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+ res);
+ goto ex_err;
+ }
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ int res2;
+ SAS_DPRINTK("task aborted, flags:0x%x\n",
+ task->task_state_flags);
+ res2 = i->dft->lldd_abort_task(task);
+ SAS_DPRINTK("came back from abort task\n");
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ if (res2 == TMF_RESP_FUNC_COMPLETE)
+ continue; /* Retry the task */
+ else
+ goto ex_err;
+ }
+ }
+ if (task->task_status.stat == SAM_BUSY ||
+ task->task_status.stat == SAM_TASK_SET_FULL ||
+ task->task_status.stat == SAS_QUEUE_FULL) {
+ SAS_DPRINTK("task: q busy, sleeping...\n");
+ schedule_timeout_interruptible(HZ);
+ } else if (task->task_status.stat == SAM_CHECK_COND) {
+ struct scsi_sense_hdr shdr;
+
+ if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+ &shdr)) {
+ SAS_DPRINTK("couldn't normalize sense\n");
+ continue;
+ }
+ if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+ (shdr.sense_key == 2 && shdr.asc == 4 &&
+ shdr.ascq == 1)) {
+ SAS_DPRINTK("device %016llx LUN: %016llx "
+ "powering up or not ready yet, "
+ "sleeping...\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN));
+
+ schedule_timeout_interruptible(5*HZ);
+ } else if (shdr.sense_key == 1) {
+ res = 0;
+ break;
+ } else if (shdr.sense_key == 5) {
+ break;
+ } else {
+ SAS_DPRINTK("dev %016llx LUN: %016llx "
+ "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+ "\n",
+ SAS_ADDR(task->dev->sas_addr),
+ SAS_ADDR(task->ssp_task.LUN),
+ shdr.sense_key,
+ shdr.asc, shdr.ascq);
+ }
+ } else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+ task->task_status.stat != SAM_GOOD) {
+ SAS_DPRINTK("task finished with resp:0x%x, "
+ "stat:0x%x\n",
+ task->task_status.resp,
+ task->task_status.stat);
+ goto ex_err;
+ } else {
+ res = 0;
+ break;
+ }
+ }
+ex_err:
+ if (pci_dma_dir != PCI_DMA_NONE)
+ kfree(scatter);
+out:
+ return res;
+}
+
+/* ---------- Domain device discovery ---------- */
+
+/**
+ * sas_get_port_device -- Discover devices which caused port creation
+ * @port: pointer to struct sas_port of interest
+ *
+ * Devices directly attached to a HA port, have no parent. This is
+ * how we know they are (domain) "root" devices. All other devices
+ * do, and should have their "parent" pointer set appropriately as
+ * soon as a child device is discovered.
+ */
+static int sas_get_port_device(struct asd_sas_port *port)
+{
+ unsigned long flags;
+ struct asd_sas_phy *phy;
+ struct sas_rphy *rphy;
+ struct domain_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ if (list_empty(&port->phy_list)) {
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+ kfree(dev);
+ return -ENODEV;
+ }
+ phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el);
+ spin_lock(&phy->frame_rcvd_lock);
+ memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd),
+ (size_t)phy->frame_rcvd_size));
+ spin_unlock(&phy->frame_rcvd_lock);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+
+ if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) {
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+ if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
+ fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
+ && (fis->device & ~0x10) == 0)
+ dev->dev_type = SATA_PM;
+ else
+ dev->dev_type = SATA_DEV;
+ dev->tproto = SATA_PROTO;
+ } else {
+ struct sas_identify_frame *id =
+ (struct sas_identify_frame *) dev->frame_rcvd;
+ dev->dev_type = id->dev_type;
+ dev->iproto = id->initiator_bits;
+ dev->tproto = id->target_bits;
+ }
+
+ sas_init_dev(dev);
+
+ switch (dev->dev_type) {
+ case SAS_END_DEV:
+ rphy = sas_end_device_alloc(port->port);
+ break;
+ case EDGE_DEV:
+ rphy = sas_expander_alloc(port->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case FANOUT_DEV:
+ rphy = sas_expander_alloc(port->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ case SATA_DEV:
+ default:
+ printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+ rphy = NULL;
+ break;
+ }
+
+ if (!rphy) {
+ kfree(dev);
+ return -ENODEV;
+ }
+ rphy->identify.phy_identifier = phy->phy->identify.phy_identifier;
+ memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_fill_in_rphy(dev, rphy);
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ port->port_dev = dev;
+ dev->port = port;
+ dev->linkrate = port->linkrate;
+ dev->min_linkrate = port->linkrate;
+ dev->max_linkrate = port->linkrate;
+ dev->pathways = port->num_phys;
+ memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE);
+ memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE);
+ port->disc.max_level = 0;
+
+ dev->rphy = rphy;
+ spin_lock(&port->dev_list_lock);
+ list_add_tail(&dev->dev_list_node, &port->dev_list);
+ spin_unlock(&port->dev_list_lock);
+
+ return 0;
+}
+
+/* ---------- Discover and Revalidate ---------- */
+
+/* ---------- SATA ---------- */
+
+static void sas_get_ata_command_set(struct domain_device *dev)
+{
+ struct dev_to_host_fis *fis =
+ (struct dev_to_host_fis *) dev->frame_rcvd;
+
+ if ((fis->sector_count == 1 && /* ATA */
+ fis->lbal == 1 &&
+ fis->lbam == 0 &&
+ fis->lbah == 0 &&
+ fis->device == 0)
+ ||
+ (fis->sector_count == 0 && /* CE-ATA (mATA) */
+ fis->lbal == 0 &&
+ fis->lbam == 0xCE &&
+ fis->lbah == 0xAA &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+ else if ((fis->interrupt_reason == 1 && /* ATAPI */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x14 &&
+ fis->byte_count_high == 0xEB &&
+ (fis->device & ~0x10) == 0))
+
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+ else if ((fis->sector_count == 1 && /* SEMB */
+ fis->lbal == 1 &&
+ fis->lbam == 0x3C &&
+ fis->lbah == 0xC3 &&
+ fis->device == 0)
+ ||
+ (fis->interrupt_reason == 1 && /* SATA PM */
+ fis->lbal == 1 &&
+ fis->byte_count_low == 0x69 &&
+ fis->byte_count_high == 0x96 &&
+ (fis->device & ~0x10) == 0))
+
+ /* Treat it as a superset? */
+ dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+ u8 features, void *buffer, int size,
+ int pci_dma_dir)
+{
+ int res = 0;
+ struct sas_task *task;
+ struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+ &dev->frame_rcvd[0];
+
+ res = -ENOMEM;
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ goto out;
+
+ task->dev = dev;
+
+ task->ata_task.fis.command = command;
+ task->ata_task.fis.features = features;
+ task->ata_task.fis.device = d2h_fis->device;
+ task->ata_task.retry_count = 1;
+
+ res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+ sas_free_task(task);
+out:
+ return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+ unsigned long flags;
+ struct asd_sas_port *port = dev->port;
+ struct asd_sas_phy *phy;
+
+ BUG_ON(dev->parent);
+
+ memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_lock_irqsave(&port->phy_list_lock, flags);
+ list_for_each_entry(phy, &port->phy_list, port_phy_el)
+ memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+ spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV 0xEC
+#define ATA_IDENTIFY_PACKET_DEV 0xA1
+#define ATA_SET_FEATURES 0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+ int res;
+ __le16 *identify_x;
+ u8 command;
+
+ identify_x = kzalloc(512, GFP_KERNEL);
+ if (!identify_x)
+ return -ENOMEM;
+
+ if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+ dev->sata_dev.identify_device = identify_x;
+ command = ATA_IDENTIFY_DEV;
+ } else {
+ dev->sata_dev.identify_packet_device = identify_x;
+ command = ATA_IDENTIFY_PACKET_DEV;
+ }
+
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+
+ /* lives on the media? */
+ if (le16_to_cpu(identify_x[0]) & 4) {
+ /* incomplete response */
+ SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+ "dev %llx\n", SAS_ADDR(dev->sas_addr));
+ if (!le16_to_cpu(identify_x[83] & (1<<6)))
+ goto cont1;
+ res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+ ATA_FEATURE_PUP_STBY_SPIN_UP,
+ NULL, 0, PCI_DMA_NONE);
+ if (res)
+ goto cont1;
+
+ schedule_timeout_interruptible(5*HZ); /* More time? */
+ res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+ PCI_DMA_FROMDEVICE);
+ if (res)
+ goto out_err;
+ }
+cont1:
+ /* Get WWN */
+ if (dev->port->oob_mode != SATA_OOB_MODE) {
+ memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+ (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+ == 0x5000) {
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ dev->sas_addr[2*i] =
+ (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+ dev->sas_addr[2*i+1] =
+ le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+ }
+ }
+ sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+ if (!dev->parent)
+ sas_sata_propagate_sas_addr(dev);
+
+ /* XXX Hint: register this SATA device with SATL.
+ When this returns, dev->sata_dev->lu is alive and
+ present.
+ sas_satl_register_dev(dev);
+ */
+ return 0;
+out_err:
+ dev->sata_dev.identify_packet_device = NULL;
+ dev->sata_dev.identify_device = NULL;
+ kfree(identify_x);
+ return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+ return -ENODEV;
+}
+
+int sas_notify_lldd_dev_found(struct domain_device *dev)
+{
+ int res = 0;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (i->dft->lldd_dev_found) {
+ res = i->dft->lldd_dev_found(dev);
+ if (res) {
+ printk("sas: driver on pcidev %s cannot handle "
+ "device %llx, error:%d\n",
+ pci_name(sas_ha->pcidev),
+ SAS_ADDR(dev->sas_addr), res);
+ }
+ }
+ return res;
+}
+
+
+void sas_notify_lldd_dev_gone(struct domain_device *dev)
+{
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ if (i->dft->lldd_dev_gone)
+ i->dft->lldd_dev_gone(dev);
+}
+
+/* ---------- Common/dispatchers ---------- */
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it. Then depending on the type of device we call the appropriate
+ * discover functions. Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it. That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time. Devices directly attached to a HA
+ * port, have no parents. All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+ int res;
+
+ sas_get_ata_command_set(dev);
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ switch (dev->dev_type) {
+ case SATA_DEV:
+ res = sas_discover_sata_dev(dev);
+ break;
+ case SATA_PM:
+ res = sas_discover_sata_pm(dev);
+ break;
+ default:
+ break;
+ }
+
+ sas_notify_lldd_dev_gone(dev);
+ if (!res) {
+ sas_notify_lldd_dev_found(dev);
+ }
+ return res;
+}
+
+/**
+ * sas_discover_end_dev -- discover an end device (SSP, etc)
+ * @end: pointer to domain device of interest
+ *
+ * See comment in sas_discover_sata().
+ */
+int sas_discover_end_dev(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_rphy_add(dev->rphy);
+ if (res)
+ goto out_err;
+
+ /* do this to get the end device port attributes which will have
+ * been scanned in sas_rphy_add */
+ sas_notify_lldd_dev_gone(dev);
+ sas_notify_lldd_dev_found(dev);
+
+ return 0;
+
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+/* ---------- Device registration and unregistration ---------- */
+
+static inline void sas_unregister_common_dev(struct domain_device *dev)
+{
+ sas_notify_lldd_dev_gone(dev);
+ if (!dev->parent)
+ dev->port->port_dev = NULL;
+ else
+ list_del_init(&dev->siblings);
+ list_del_init(&dev->dev_list_node);
+}
+
+void sas_unregister_dev(struct domain_device *dev)
+{
+ if (dev->rphy) {
+ sas_remove_children(&dev->rphy->dev);
+ sas_rphy_delete(dev->rphy);
+ dev->rphy = NULL;
+ }
+ if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+ /* remove the phys and ports, everything else should be gone */
+ kfree(dev->ex_dev.ex_phy);
+ dev->ex_dev.ex_phy = NULL;
+ }
+ sas_unregister_common_dev(dev);
+}
+
+void sas_unregister_domain_devices(struct asd_sas_port *port)
+{
+ struct domain_device *dev, *n;
+
+ list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node)
+ sas_unregister_dev(dev);
+
+ port->port->rphy = NULL;
+
+}
+
+/* ---------- Discovery and Revalidation ---------- */
+
+/**
+ * sas_discover_domain -- discover the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+static void sas_discover_domain(void *data)
+{
+ int error = 0;
+ struct asd_sas_port *port = data;
+
+ sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock,
+ &port->disc.pending);
+
+ if (port->port_dev)
+ return ;
+ else {
+ error = sas_get_port_device(port);
+ if (error)
+ return;
+ }
+
+ SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+ current->pid);
+
+ switch (port->port_dev->dev_type) {
+ case SAS_END_DEV:
+ error = sas_discover_end_dev(port->port_dev);
+ break;
+ case EDGE_DEV:
+ case FANOUT_DEV:
+ error = sas_discover_root_expander(port->port_dev);
+ break;
+ case SATA_DEV:
+ case SATA_PM:
+ error = sas_discover_sata(port->port_dev);
+ break;
+ default:
+ SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+ break;
+ }
+
+ if (error) {
+ kfree(port->port_dev); /* not kobject_register-ed yet */
+ port->port_dev = NULL;
+ }
+
+ SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+ current->pid, error);
+}
+
+static void sas_revalidate_domain(void *data)
+{
+ int res = 0;
+ struct asd_sas_port *port = data;
+
+ sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock,
+ &port->disc.pending);
+
+ SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+ current->pid);
+ if (port->port_dev)
+ res = sas_ex_revalidate_domain(port->port_dev);
+
+ SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+ port->id, current->pid, res);
+}
+
+/* ---------- Events ---------- */
+
+int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
+{
+ struct sas_discovery *disc;
+
+ if (!port)
+ return 0;
+ disc = &port->disc;
+
+ BUG_ON(ev >= DISC_NUM_EVENTS);
+
+ sas_queue_event(ev, &disc->disc_event_lock, &disc->pending,
+ &disc->disc_work[ev], port->ha->core.shost);
+
+ return 0;
+}
+
+/**
+ * sas_init_disc -- initialize the discovery struct in the port
+ * @port: pointer to struct port
+ *
+ * Called when the ports are being initialized.
+ */
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port)
+{
+ int i;
+
+ static void (*sas_event_fns[DISC_NUM_EVENTS])(void *) = {
+ [DISCE_DISCOVER_DOMAIN] = sas_discover_domain,
+ [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain,
+ };
+
+ spin_lock_init(&disc->disc_event_lock);
+ disc->pending = 0;
+ for (i = 0; i < DISC_NUM_EVENTS; i++)
+ INIT_WORK(&disc->disc_work[i], sas_event_fns[i], port);
+}
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_dump.h"
+
+#ifdef SAS_DEBUG
+
+static const char *sas_hae_str[] = {
+ [0] = "HAE_RESET",
+};
+
+static const char *sas_porte_str[] = {
+ [0] = "PORTE_BYTES_DMAED",
+ [1] = "PORTE_BROADCAST_RCVD",
+ [2] = "PORTE_LINK_RESET_ERR",
+ [3] = "PORTE_TIMER_EVENT",
+ [4] = "PORTE_HARD_RESET",
+};
+
+static const char *sas_phye_str[] = {
+ [0] = "PHYE_LOSS_OF_SIGNAL",
+ [1] = "PHYE_OOB_DONE",
+ [2] = "PHYE_OOB_ERROR",
+ [3] = "PHYE_SPINUP_HOLD",
+};
+
+void sas_dprint_porte(int phyid, enum port_event pe)
+{
+ SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
+}
+void sas_dprint_phye(int phyid, enum phy_event pe)
+{
+ SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
+}
+
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he)
+{
+ SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev),
+ sas_hae_str[he]);
+}
+
+void sas_dump_port(struct asd_sas_port *port)
+{
+ SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
+ SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->sas_addr));
+ SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
+ SAS_ADDR(port->attached_sas_addr));
+ SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
+ SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
+ SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
+ SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
+}
+
+#endif /* SAS_DEBUG */
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Dump/Debugging routines header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#ifdef SAS_DEBUG
+
+void sas_dprint_porte(int phyid, enum port_event pe);
+void sas_dprint_phye(int phyid, enum phy_event pe);
+void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
+void sas_dump_port(struct asd_sas_port *port);
+
+#else /* SAS_DEBUG */
+
+static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
+static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
+static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
+ enum ha_event he) { }
+static inline void sas_dump_port(struct asd_sas_port *port) { }
+
+#endif /* SAS_DEBUG */
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Event processing
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <scsi/scsi_host.h>
+#include "sas_internal.h"
+#include "sas_dump.h"
+
+static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
+{
+ BUG_ON(event >= HA_NUM_EVENTS);
+
+ sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending,
+ &sas_ha->ha_events[event], sas_ha->core.shost);
+}
+
+static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
+{
+ struct sas_ha_struct *ha = phy->ha;
+
+ BUG_ON(event >= PORT_NUM_EVENTS);
+
+ sas_queue_event(event, &ha->event_lock, &phy->port_events_pending,
+ &phy->port_events[event], ha->core.shost);
+}
+
+static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
+{
+ struct sas_ha_struct *ha = phy->ha;
+
+ BUG_ON(event >= PHY_NUM_EVENTS);
+
+ sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending,
+ &phy->phy_events[event], ha->core.shost);
+}
+
+int sas_init_events(struct sas_ha_struct *sas_ha)
+{
+ static void (*sas_ha_event_fns[HA_NUM_EVENTS])(void *) = {
+ [HAE_RESET] = sas_hae_reset,
+ };
+
+ int i;
+
+ spin_lock_init(&sas_ha->event_lock);
+
+ for (i = 0; i < HA_NUM_EVENTS; i++)
+ INIT_WORK(&sas_ha->ha_events[i], sas_ha_event_fns[i], sas_ha);
+
+ sas_ha->notify_ha_event = notify_ha_event;
+ sas_ha->notify_port_event = notify_port_event;
+ sas_ha->notify_phy_event = notify_phy_event;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static int sas_discover_expander(struct domain_device *dev);
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include);
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr);
+
+#if 0
+/* FIXME: smp needs to migrate into the sas class */
+static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+#endif
+
+/* ---------- SMP task management ---------- */
+
+static void smp_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void smp_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+/* Give it some long enough timeout. In seconds. */
+#define SMP_TIMEOUT 10
+
+static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
+ void *resp, int resp_size)
+{
+ int res;
+ struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ sg_init_one(&task->smp_task.smp_req, req, req_size);
+ sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+ task->task_done = smp_task_done;
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = smp_task_timedout;
+ task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SMP task failed:%d\n", res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ SAS_DPRINTK("smp task timed out or aborted\n");
+ i->dft->lldd_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ SAS_DPRINTK("SMP task aborted and not done\n");
+ goto ex_err;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD)
+ res = 0;
+ else
+ SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ex_err:
+ sas_free_task(task);
+ return res;
+}
+
+/* ---------- Allocations ---------- */
+
+static inline void *alloc_smp_req(int size)
+{
+ u8 *p = kzalloc(size, GFP_KERNEL);
+ if (p)
+ p[0] = SMP_REQUEST;
+ return p;
+}
+
+static inline void *alloc_smp_resp(int size)
+{
+ return kzalloc(size, GFP_KERNEL);
+}
+
+/* ---------- Expander configuration ---------- */
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
+ void *disc_resp)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ struct smp_resp *resp = disc_resp;
+ struct discover_resp *dr = &resp->disc;
+ struct sas_rphy *rphy = dev->rphy;
+ int rediscover = (phy->phy != NULL);
+
+ if (!rediscover) {
+ phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
+
+ /* FIXME: error_handling */
+ BUG_ON(!phy->phy);
+ }
+
+ switch (resp->result) {
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ return;
+ default:
+ phy->phy_state = PHY_NOT_PRESENT;
+ return;
+ case SMP_RESP_FUNC_ACC:
+ phy->phy_state = PHY_EMPTY; /* do not know yet */
+ break;
+ }
+
+ phy->phy_id = phy_id;
+ phy->attached_dev_type = dr->attached_dev_type;
+ phy->linkrate = dr->linkrate;
+ phy->attached_sata_host = dr->attached_sata_host;
+ phy->attached_sata_dev = dr->attached_sata_dev;
+ phy->attached_sata_ps = dr->attached_sata_ps;
+ phy->attached_iproto = dr->iproto << 1;
+ phy->attached_tproto = dr->tproto << 1;
+ memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
+ phy->attached_phy_id = dr->attached_phy_id;
+ phy->phy_change_count = dr->change_count;
+ phy->routing_attr = dr->routing_attr;
+ phy->virtual = dr->virtual;
+ phy->last_da_index = -1;
+
+ phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
+ phy->phy->identify.target_port_protocols = phy->attached_tproto;
+ phy->phy->identify.phy_identifier = phy_id;
+ phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ switch (phy->linkrate) {
+ case PHY_LINKRATE_1_5:
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ case PHY_LINKRATE_3:
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case PHY_LINKRATE_6:
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ break;
+ default:
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ break;
+ }
+
+ if (!rediscover)
+ sas_phy_add(phy->phy);
+
+ SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n",
+ SAS_ADDR(dev->sas_addr), phy->phy_id,
+ phy->routing_attr == TABLE_ROUTING ? 'T' :
+ phy->routing_attr == DIRECT_ROUTING ? 'D' :
+ phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?',
+ SAS_ADDR(phy->attached_sas_addr));
+
+ return;
+}
+
+#define DISCOVER_REQ_SIZE 16
+#define DISCOVER_RESP_SIZE 56
+
+static int sas_ex_phy_discover(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ u8 *disc_req;
+ u8 *disc_resp;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE);
+ if (!disc_resp) {
+ kfree(disc_req);
+ return -ENOMEM;
+ }
+
+ disc_req[1] = SMP_DISCOVER;
+
+ if (0 <= single && single < ex->num_phys) {
+ disc_req[9] = single;
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ goto out_err;
+ sas_set_ex_phy(dev, single, disc_resp);
+ } else {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ disc_req[9] = i;
+ res = smp_execute_task(dev, disc_req,
+ DISCOVER_REQ_SIZE, disc_resp,
+ DISCOVER_RESP_SIZE);
+ if (res)
+ goto out_err;
+ sas_set_ex_phy(dev, i, disc_resp);
+ }
+ }
+out_err:
+ kfree(disc_resp);
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_expander_discover(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = -ENOMEM;
+
+ ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL);
+ if (!ex->ex_phy)
+ return -ENOMEM;
+
+ res = sas_ex_phy_discover(dev, -1);
+ if (res)
+ goto out_err;
+
+ return 0;
+ out_err:
+ kfree(ex->ex_phy);
+ ex->ex_phy = NULL;
+ return res;
+}
+
+#define MAX_EXPANDER_PHYS 128
+
+static void ex_assign_report_general(struct domain_device *dev,
+ struct smp_resp *resp)
+{
+ struct report_general_resp *rg = &resp->rg;
+
+ dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
+ dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
+ dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
+ dev->ex_dev.conf_route_table = rg->conf_route_table;
+ dev->ex_dev.configuring = rg->configuring;
+ memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8);
+}
+
+#define RG_REQ_SIZE 8
+#define RG_RESP_SIZE 32
+
+static int sas_ex_general(struct domain_device *dev)
+{
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+ int res;
+ int i;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ for (i = 0; i < 5; i++) {
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+
+ if (res) {
+ SAS_DPRINTK("RG to ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), rg_resp->result);
+ res = rg_resp->result;
+ goto out;
+ }
+
+ ex_assign_report_general(dev, rg_resp);
+
+ if (dev->ex_dev.configuring) {
+ SAS_DPRINTK("RG: ex %llx self-configuring...\n",
+ SAS_ADDR(dev->sas_addr));
+ schedule_timeout_interruptible(5*HZ);
+ } else
+ break;
+ }
+out:
+ kfree(rg_req);
+ kfree(rg_resp);
+ return res;
+}
+
+static void ex_assign_manuf_info(struct domain_device *dev, void
+ *_mi_resp)
+{
+ u8 *mi_resp = _mi_resp;
+ struct sas_rphy *rphy = dev->rphy;
+ struct sas_expander_device *edev = rphy_to_expander_device(rphy);
+
+ memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
+ memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
+ memcpy(edev->product_rev, mi_resp + 36,
+ SAS_EXPANDER_PRODUCT_REV_LEN);
+
+ if (mi_resp[8] & 1) {
+ memcpy(edev->component_vendor_id, mi_resp + 40,
+ SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
+ edev->component_id = mi_resp[48] << 8 | mi_resp[49];
+ edev->component_revision_id = mi_resp[50];
+ }
+}
+
+#define MI_REQ_SIZE 8
+#define MI_RESP_SIZE 64
+
+static int sas_ex_manuf_info(struct domain_device *dev)
+{
+ u8 *mi_req;
+ u8 *mi_resp;
+ int res;
+
+ mi_req = alloc_smp_req(MI_REQ_SIZE);
+ if (!mi_req)
+ return -ENOMEM;
+
+ mi_resp = alloc_smp_resp(MI_RESP_SIZE);
+ if (!mi_resp) {
+ kfree(mi_req);
+ return -ENOMEM;
+ }
+
+ mi_req[1] = SMP_REPORT_MANUF_INFO;
+
+ res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE);
+ if (res) {
+ SAS_DPRINTK("MI: ex %016llx failed:0x%x\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out;
+ } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n",
+ SAS_ADDR(dev->sas_addr), mi_resp[2]);
+ goto out;
+ }
+
+ ex_assign_manuf_info(dev, mi_resp);
+out:
+ kfree(mi_req);
+ kfree(mi_resp);
+ return res;
+}
+
+#define PC_REQ_SIZE 44
+#define PC_RESP_SIZE 8
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func)
+{
+ u8 *pc_req;
+ u8 *pc_resp;
+ int res;
+
+ pc_req = alloc_smp_req(PC_REQ_SIZE);
+ if (!pc_req)
+ return -ENOMEM;
+
+ pc_resp = alloc_smp_resp(PC_RESP_SIZE);
+ if (!pc_resp) {
+ kfree(pc_req);
+ return -ENOMEM;
+ }
+
+ pc_req[1] = SMP_PHY_CONTROL;
+ pc_req[9] = phy_id;
+ pc_req[10]= phy_func;
+
+ res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
+
+ kfree(pc_resp);
+ kfree(pc_req);
+ return res;
+}
+
+static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+
+ sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE);
+ phy->linkrate = PHY_DISABLED;
+}
+
+static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
+ sas_ex_disable_phy(dev, i);
+ }
+}
+
+static int sas_dev_present_in_domain(struct asd_sas_port *port,
+ u8 *sas_addr)
+{
+ struct domain_device *dev;
+
+ if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
+ return 1;
+ }
+ return 0;
+}
+
+#define RPEL_REQ_SIZE 16
+#define RPEL_RESP_SIZE 32
+int sas_smp_get_phy_events(struct sas_phy *phy)
+{
+ int res;
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *dev = sas_find_dev_by_rphy(rphy);
+ u8 *req = alloc_smp_req(RPEL_REQ_SIZE);
+ u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL);
+
+ if (!resp)
+ return -ENOMEM;
+
+ req[1] = SMP_REPORT_PHY_ERR_LOG;
+ req[9] = phy->number;
+
+ res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
+ resp, RPEL_RESP_SIZE);
+
+ if (!res)
+ goto out;
+
+ phy->invalid_dword_count = scsi_to_u32(&resp[12]);
+ phy->running_disparity_error_count = scsi_to_u32(&resp[16]);
+ phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]);
+ phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
+
+ out:
+ kfree(resp);
+ return res;
+
+}
+
+#define RPS_REQ_SIZE 16
+#define RPS_RESP_SIZE 60
+
+static int sas_get_report_phy_sata(struct domain_device *dev,
+ int phy_id,
+ struct smp_resp *rps_resp)
+{
+ int res;
+ u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+
+ if (!rps_req)
+ return -ENOMEM;
+
+ rps_req[1] = SMP_REPORT_PHY_SATA;
+ rps_req[9] = phy_id;
+
+ res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
+ rps_resp, RPS_RESP_SIZE);
+
+ kfree(rps_req);
+ return 0;
+}
+
+static void sas_ex_get_linkrate(struct domain_device *parent,
+ struct domain_device *child,
+ struct ex_phy *parent_phy)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct sas_port *port;
+ int i;
+
+ child->pathways = 0;
+
+ port = parent_phy->port;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *phy = &parent_ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr)) {
+
+ child->min_linkrate = min(parent->min_linkrate,
+ phy->linkrate);
+ child->max_linkrate = max(parent->max_linkrate,
+ phy->linkrate);
+ child->pathways++;
+ sas_port_add_phy(port, phy->phy);
+ }
+ }
+ child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
+ child->pathways = min(child->pathways, parent->pathways);
+}
+
+static struct domain_device *sas_ex_discover_end_dev(
+ struct domain_device *parent, int phy_id)
+{
+ struct expander_device *parent_ex = &parent->ex_dev;
+ struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ int res;
+
+ if (phy->attached_sata_host || phy->attached_sata_ps)
+ return NULL;
+
+ child = kzalloc(sizeof(*child), GFP_KERNEL);
+ if (!child)
+ return NULL;
+
+ child->parent = parent;
+ child->port = parent->port;
+ child->iproto = phy->attached_iproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ BUG_ON(!phy->port);
+ /* FIXME: better error handling*/
+ BUG_ON(sas_port_add(phy->port) != 0);
+ sas_ex_get_linkrate(parent, child, phy);
+
+ if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
+ child->dev_type = SATA_DEV;
+ if (phy->attached_tproto & SAS_PROTO_STP)
+ child->tproto = phy->attached_tproto;
+ if (phy->attached_sata_dev)
+ child->tproto |= SATA_DEV;
+ res = sas_get_report_phy_sata(parent, phy_id,
+ &child->sata_dev.rps_resp);
+ if (res) {
+ SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+ "0x%x\n", SAS_ADDR(parent->sas_addr),
+ phy_id, res);
+ kfree(child);
+ return NULL;
+ }
+ memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
+ sizeof(struct dev_to_host_fis));
+ sas_init_dev(child);
+ res = sas_discover_sata(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_sata() for device %16llx at "
+ "%016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ kfree(child);
+ return NULL;
+ }
+ } else if (phy->attached_tproto & SAS_PROTO_SSP) {
+ child->dev_type = SAS_END_DEV;
+ rphy = sas_end_device_alloc(phy->port);
+ /* FIXME: error handling */
+ BUG_ON(!rphy);
+ child->tproto = phy->attached_tproto;
+ sas_init_dev(child);
+
+ child->rphy = rphy;
+ sas_fill_in_rphy(child, rphy);
+
+ spin_lock(&parent->port->dev_list_lock);
+ list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+ spin_unlock(&parent->port->dev_list_lock);
+
+ res = sas_discover_end_dev(child);
+ if (res) {
+ SAS_DPRINTK("sas_discover_end_dev() for device %16llx "
+ "at %016llx:0x%x returned 0x%x\n",
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(parent->sas_addr), phy_id, res);
+ /* FIXME: this kfrees list elements without removing them */
+ //kfree(child);
+ return NULL;
+ }
+ } else {
+ SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
+ phy->attached_tproto, SAS_ADDR(parent->sas_addr),
+ phy_id);
+ }
+
+ list_add_tail(&child->siblings, &parent_ex->children);
+ return child;
+}
+
+static struct domain_device *sas_ex_discover_expander(
+ struct domain_device *parent, int phy_id)
+{
+ struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
+ struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ struct sas_rphy *rphy;
+ struct sas_expander_device *edev;
+ struct asd_sas_port *port;
+ int res;
+
+ if (phy->routing_attr == DIRECT_ROUTING) {
+ SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not "
+ "allowed\n",
+ SAS_ADDR(parent->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr),
+ phy->attached_phy_id);
+ return NULL;
+ }
+ child = kzalloc(sizeof(*child), GFP_KERNEL);
+ if (!child)
+ return NULL;
+
+ phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
+ /* FIXME: better error handling */
+ BUG_ON(sas_port_add(phy->port) != 0);
+
+
+ switch (phy->attached_dev_type) {
+ case EDGE_DEV:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_EDGE_EXPANDER_DEVICE);
+ break;
+ case FANOUT_DEV:
+ rphy = sas_expander_alloc(phy->port,
+ SAS_FANOUT_EXPANDER_DEVICE);
+ break;
+ default:
+ rphy = NULL; /* shut gcc up */
+ BUG();
+ }
+ port = parent->port;
+ child->rphy = rphy;
+ edev = rphy_to_expander_device(rphy);
+ child->dev_type = phy->attached_dev_type;
+ child->parent = parent;
+ child->port = port;
+ child->iproto = phy->attached_iproto;
+ child->tproto = phy->attached_tproto;
+ memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+ sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
+ sas_ex_get_linkrate(parent, child, phy);
+ edev->level = parent_ex->level + 1;
+ parent->port->disc.max_level = max(parent->port->disc.max_level,
+ edev->level);
+ sas_init_dev(child);
+ sas_fill_in_rphy(child, rphy);
+ sas_rphy_add(rphy);
+
+ spin_lock(&parent->port->dev_list_lock);
+ list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+ spin_unlock(&parent->port->dev_list_lock);
+
+ res = sas_discover_expander(child);
+ if (res) {
+ kfree(child);
+ return NULL;
+ }
+ list_add_tail(&child->siblings, &parent->ex_dev.children);
+ return child;
+}
+
+static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+ struct domain_device *child = NULL;
+ int res = 0;
+
+ /* Phy state */
+ if (ex_phy->linkrate == PHY_SPINUP_HOLD) {
+ if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET))
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ return res;
+ }
+
+ /* Parent and domain coherency */
+ if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->port->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ return 0;
+ }
+ if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) ==
+ SAS_ADDR(dev->parent->sas_addr))) {
+ sas_add_parent_port(dev, phy_id);
+ if (ex_phy->routing_attr == TABLE_ROUTING)
+ sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
+ return 0;
+ }
+
+ if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
+ sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
+
+ if (ex_phy->attached_dev_type == NO_DEVICE) {
+ if (ex_phy->routing_attr == DIRECT_ROUTING) {
+ memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ }
+ return 0;
+ } else if (ex_phy->linkrate == PHY_LINKRATE_UNKNOWN)
+ return 0;
+
+ if (ex_phy->attached_dev_type != SAS_END_DEV &&
+ ex_phy->attached_dev_type != FANOUT_DEV &&
+ ex_phy->attached_dev_type != EDGE_DEV) {
+ SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
+ "phy 0x%x\n", ex_phy->attached_dev_type,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ return 0;
+ }
+
+ res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
+ if (res) {
+ SAS_DPRINTK("configure routing for dev %016llx "
+ "reported 0x%x. Forgotten\n",
+ SAS_ADDR(ex_phy->attached_sas_addr), res);
+ sas_disable_routing(dev, ex_phy->attached_sas_addr);
+ return res;
+ }
+
+ switch (ex_phy->attached_dev_type) {
+ case SAS_END_DEV:
+ child = sas_ex_discover_end_dev(dev, phy_id);
+ break;
+ case FANOUT_DEV:
+ if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
+ SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
+ "attached to ex %016llx phy 0x%x\n",
+ SAS_ADDR(ex_phy->attached_sas_addr),
+ ex_phy->attached_phy_id,
+ SAS_ADDR(dev->sas_addr),
+ phy_id);
+ sas_ex_disable_phy(dev, phy_id);
+ break;
+ } else
+ memcpy(dev->port->disc.fanout_sas_addr,
+ ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
+ /* fallthrough */
+ case EDGE_DEV:
+ child = sas_ex_discover_expander(dev, phy_id);
+ break;
+ default:
+ break;
+ }
+
+ if (child) {
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ if (ex->ex_phy[i].phy_state == PHY_VACANT ||
+ ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr))
+ ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ }
+ }
+
+ return res;
+}
+
+static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == EDGE_DEV ||
+ phy->attached_dev_type == FANOUT_DEV) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
+
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int sas_check_level_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child;
+ u8 sub_addr[8] = {0, };
+
+ list_for_each_entry(child, &ex->children, siblings) {
+ if (child->dev_type != EDGE_DEV &&
+ child->dev_type != FANOUT_DEV)
+ continue;
+ if (sub_addr[0] == 0) {
+ sas_find_sub_addr(child, sub_addr);
+ continue;
+ } else {
+ u8 s2[8];
+
+ if (sas_find_sub_addr(child, s2) &&
+ (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
+
+ SAS_DPRINTK("ex %016llx->%016llx-?->%016llx "
+ "diverges from subtractive "
+ "boundary %016llx\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(child->sas_addr),
+ SAS_ADDR(s2),
+ SAS_ADDR(sub_addr));
+
+ sas_ex_disable_port(child, s2);
+ }
+ }
+ }
+ return 0;
+}
+/**
+ * sas_ex_discover_devices -- discover devices attached to this expander
+ * dev: pointer to the expander domain device
+ * single: if you want to do a single phy, else set to -1;
+ *
+ * Configure this expander for use with its devices and register the
+ * devices of this expander.
+ */
+static int sas_ex_discover_devices(struct domain_device *dev, int single)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, end = ex->num_phys;
+ int res = 0;
+
+ if (0 <= single && single < end) {
+ i = single;
+ end = i+1;
+ }
+
+ for ( ; i < end; i++) {
+ struct ex_phy *ex_phy = &ex->ex_phy[i];
+
+ if (ex_phy->phy_state == PHY_VACANT ||
+ ex_phy->phy_state == PHY_NOT_PRESENT ||
+ ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
+ continue;
+
+ switch (ex_phy->linkrate) {
+ case PHY_DISABLED:
+ case PHY_RESET_PROBLEM:
+ case PHY_PORT_SELECTOR:
+ continue;
+ default:
+ res = sas_ex_discover_dev(dev, i);
+ if (res)
+ break;
+ continue;
+ }
+ }
+
+ if (!res)
+ sas_check_level_subtractive_boundary(dev);
+
+ return res;
+}
+
+static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int i;
+ u8 *sub_sas_addr = NULL;
+
+ if (dev->dev_type != EDGE_DEV)
+ return 0;
+
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (phy->phy_state == PHY_VACANT ||
+ phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if ((phy->attached_dev_type == FANOUT_DEV ||
+ phy->attached_dev_type == EDGE_DEV) &&
+ phy->routing_attr == SUBTRACTIVE_ROUTING) {
+
+ if (!sub_sas_addr)
+ sub_sas_addr = &phy->attached_sas_addr[0];
+ else if (SAS_ADDR(sub_sas_addr) !=
+ SAS_ADDR(phy->attached_sas_addr)) {
+
+ SAS_DPRINTK("ex %016llx phy 0x%x "
+ "diverges(%016llx) on subtractive "
+ "boundary(%016llx). Disabled\n",
+ SAS_ADDR(dev->sas_addr), i,
+ SAS_ADDR(phy->attached_sas_addr),
+ SAS_ADDR(sub_sas_addr));
+ sas_ex_disable_phy(dev, i);
+ }
+ }
+ }
+ return 0;
+}
+
+static void sas_print_parent_topology_bug(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ static const char ra_char[] = {
+ [DIRECT_ROUTING] = 'D',
+ [SUBTRACTIVE_ROUTING] = 'S',
+ [TABLE_ROUTING] = 'T',
+ };
+ static const char *ex_type[] = {
+ [EDGE_DEV] = "edge",
+ [FANOUT_DEV] = "fanout",
+ };
+ struct domain_device *parent = child->parent;
+
+ sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x "
+ "has %c:%c routing link!\n",
+
+ ex_type[parent->dev_type],
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+
+ ex_type[child->dev_type],
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+
+ ra_char[parent_phy->routing_attr],
+ ra_char[child_phy->routing_attr]);
+}
+
+static int sas_check_eeds(struct domain_device *child,
+ struct ex_phy *parent_phy,
+ struct ex_phy *child_phy)
+{
+ int res = 0;
+ struct domain_device *parent = child->parent;
+
+ if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx "
+ "phy S:0x%x, while there is a fanout ex %016llx\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id,
+ SAS_ADDR(parent->port->disc.fanout_sas_addr));
+ } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
+ memcpy(parent->port->disc.eeds_a, parent->sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(parent->port->disc.eeds_b, child->sas_addr,
+ SAS_ADDR_SIZE);
+ } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_a) ==
+ SAS_ADDR(child->sas_addr)))
+ &&
+ ((SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(parent->sas_addr)) ||
+ (SAS_ADDR(parent->port->disc.eeds_b) ==
+ SAS_ADDR(child->sas_addr))))
+ ;
+ else {
+ res = -ENODEV;
+ SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx "
+ "phy 0x%x link forms a third EEDS!\n",
+ SAS_ADDR(parent->sas_addr),
+ parent_phy->phy_id,
+ SAS_ADDR(child->sas_addr),
+ child_phy->phy_id);
+ }
+
+ return res;
+}
+
+/* Here we spill over 80 columns. It is intentional.
+ */
+static int sas_check_parent_topology(struct domain_device *child)
+{
+ struct expander_device *child_ex = &child->ex_dev;
+ struct expander_device *parent_ex;
+ int i;
+ int res = 0;
+
+ if (!child->parent)
+ return 0;
+
+ if (child->parent->dev_type != EDGE_DEV &&
+ child->parent->dev_type != FANOUT_DEV)
+ return 0;
+
+ parent_ex = &child->parent->ex_dev;
+
+ for (i = 0; i < parent_ex->num_phys; i++) {
+ struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
+ struct ex_phy *child_phy;
+
+ if (parent_phy->phy_state == PHY_VACANT ||
+ parent_phy->phy_state == PHY_NOT_PRESENT)
+ continue;
+
+ if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr))
+ continue;
+
+ child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
+
+ switch (child->parent->dev_type) {
+ case EDGE_DEV:
+ if (child->dev_type == FANOUT_DEV) {
+ if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
+ child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
+ res = sas_check_eeds(child, parent_phy, child_phy);
+ } else if (child_phy->routing_attr != TABLE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ } else if (parent_phy->routing_attr == TABLE_ROUTING &&
+ child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ break;
+ case FANOUT_DEV:
+ if (parent_phy->routing_attr != TABLE_ROUTING ||
+ child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
+ sas_print_parent_topology_bug(child, parent_phy, child_phy);
+ res = -ENODEV;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ return res;
+}
+
+#define RRI_REQ_SIZE 16
+#define RRI_RESP_SIZE 44
+
+static int sas_configure_present(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int *index, int *present)
+{
+ int i, res = 0;
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ u8 *rri_req;
+ u8 *rri_resp;
+
+ *present = 0;
+ *index = 0;
+
+ rri_req = alloc_smp_req(RRI_REQ_SIZE);
+ if (!rri_req)
+ return -ENOMEM;
+
+ rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
+ if (!rri_resp) {
+ kfree(rri_req);
+ return -ENOMEM;
+ }
+
+ rri_req[1] = SMP_REPORT_ROUTE_INFO;
+ rri_req[9] = phy_id;
+
+ for (i = 0; i < ex->max_route_indexes ; i++) {
+ *(__be16 *)(rri_req+6) = cpu_to_be16(i);
+ res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
+ RRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = rri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx "
+ "phy 0x%x index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, i);
+ goto out;
+ } else if (res != SMP_RESP_FUNC_ACC) {
+ SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x "
+ "result 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr), phy_id, i, res);
+ goto out;
+ }
+ if (SAS_ADDR(sas_addr) != 0) {
+ if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
+ *index = i;
+ if ((rri_resp[12] & 0x80) == 0x80)
+ *present = 0;
+ else
+ *present = 1;
+ goto out;
+ } else if (SAS_ADDR(rri_resp+16) == 0) {
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ } else if (SAS_ADDR(rri_resp+16) == 0 &&
+ phy->last_da_index < i) {
+ phy->last_da_index = i;
+ *index = i;
+ *present = 0;
+ goto out;
+ }
+ }
+ res = -1;
+out:
+ kfree(rri_req);
+ kfree(rri_resp);
+ return res;
+}
+
+#define CRI_REQ_SIZE 44
+#define CRI_RESP_SIZE 8
+
+static int sas_configure_set(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int index, int include)
+{
+ int res;
+ u8 *cri_req;
+ u8 *cri_resp;
+
+ cri_req = alloc_smp_req(CRI_REQ_SIZE);
+ if (!cri_req)
+ return -ENOMEM;
+
+ cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
+ if (!cri_resp) {
+ kfree(cri_req);
+ return -ENOMEM;
+ }
+
+ cri_req[1] = SMP_CONF_ROUTE_INFO;
+ *(__be16 *)(cri_req+6) = cpu_to_be16(index);
+ cri_req[9] = phy_id;
+ if (SAS_ADDR(sas_addr) == 0 || !include)
+ cri_req[12] |= 0x80;
+ memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
+
+ res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
+ CRI_RESP_SIZE);
+ if (res)
+ goto out;
+ res = cri_resp[2];
+ if (res == SMP_RESP_NO_INDEX) {
+ SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x "
+ "index 0x%x\n",
+ SAS_ADDR(dev->sas_addr), phy_id, index);
+ }
+out:
+ kfree(cri_req);
+ kfree(cri_resp);
+ return res;
+}
+
+static int sas_configure_phy(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, int include)
+{
+ int index;
+ int present;
+ int res;
+
+ res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
+ if (res)
+ return res;
+ if (include ^ present)
+ return sas_configure_set(dev, phy_id, sas_addr, index,include);
+
+ return res;
+}
+
+/**
+ * sas_configure_parent -- configure routing table of parent
+ * parent: parent expander
+ * child: child expander
+ * sas_addr: SAS port identifier of device directly attached to child
+ */
+static int sas_configure_parent(struct domain_device *parent,
+ struct domain_device *child,
+ u8 *sas_addr, int include)
+{
+ struct expander_device *ex_parent = &parent->ex_dev;
+ int res = 0;
+ int i;
+
+ if (parent->parent) {
+ res = sas_configure_parent(parent->parent, parent, sas_addr,
+ include);
+ if (res)
+ return res;
+ }
+
+ if (ex_parent->conf_route_table == 0) {
+ SAS_DPRINTK("ex %016llx has self-configuring routing table\n",
+ SAS_ADDR(parent->sas_addr));
+ return 0;
+ }
+
+ for (i = 0; i < ex_parent->num_phys; i++) {
+ struct ex_phy *phy = &ex_parent->ex_phy[i];
+
+ if ((phy->routing_attr == TABLE_ROUTING) &&
+ (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(child->sas_addr))) {
+ res = sas_configure_phy(parent, i, sas_addr, include);
+ if (res)
+ return res;
+ }
+ }
+
+ return res;
+}
+
+/**
+ * sas_configure_routing -- configure routing
+ * dev: expander device
+ * sas_addr: port identifier of device directly attached to the expander device
+ */
+static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 1);
+ return 0;
+}
+
+static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr)
+{
+ if (dev->parent)
+ return sas_configure_parent(dev->parent, dev, sas_addr, 0);
+ return 0;
+}
+
+#if 0
+#define SMP_BIN_ATTR_NAME "smp_portal"
+
+static void sas_ex_smp_hook(struct domain_device *dev)
+{
+ struct expander_device *ex_dev = &dev->ex_dev;
+ struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
+
+ memset(bin_attr, 0, sizeof(*bin_attr));
+
+ bin_attr->attr.name = SMP_BIN_ATTR_NAME;
+ bin_attr->attr.owner = THIS_MODULE;
+ bin_attr->attr.mode = 0600;
+
+ bin_attr->size = 0;
+ bin_attr->private = NULL;
+ bin_attr->read = smp_portal_read;
+ bin_attr->write= smp_portal_write;
+ bin_attr->mmap = NULL;
+
+ ex_dev->smp_portal_pid = -1;
+ init_MUTEX(&ex_dev->smp_sema);
+}
+#endif
+
+/**
+ * sas_discover_expander -- expander discovery
+ * @ex: pointer to expander domain device
+ *
+ * See comment in sas_discover_sata().
+ */
+static int sas_discover_expander(struct domain_device *dev)
+{
+ int res;
+
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ return res;
+
+ res = sas_ex_general(dev);
+ if (res)
+ goto out_err;
+ res = sas_ex_manuf_info(dev);
+ if (res)
+ goto out_err;
+
+ res = sas_expander_discover(dev);
+ if (res) {
+ SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n",
+ SAS_ADDR(dev->sas_addr), res);
+ goto out_err;
+ }
+
+ sas_check_ex_subtractive_boundary(dev);
+ res = sas_check_parent_topology(dev);
+ if (res)
+ goto out_err;
+ return 0;
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+ return res;
+}
+
+static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
+{
+ int res = 0;
+ struct domain_device *dev;
+
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (dev->dev_type == EDGE_DEV ||
+ dev->dev_type == FANOUT_DEV) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(dev->rphy);
+
+ if (level == ex->level)
+ res = sas_ex_discover_devices(dev, -1);
+ else if (level > 0)
+ res = sas_ex_discover_devices(port->port_dev, -1);
+
+ }
+ }
+
+ return res;
+}
+
+static int sas_ex_bfs_disc(struct asd_sas_port *port)
+{
+ int res;
+ int level;
+
+ do {
+ level = port->disc.max_level;
+ res = sas_ex_level_discovery(port, level);
+ mb();
+ } while (level < port->disc.max_level);
+
+ return res;
+}
+
+int sas_discover_root_expander(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+
+ sas_rphy_add(dev->rphy);
+
+ ex->level = dev->port->disc.max_level; /* 0 */
+ res = sas_discover_expander(dev);
+ if (!res)
+ sas_ex_bfs_disc(dev->port);
+
+ return res;
+}
+
+/* ---------- Domain revalidation ---------- */
+
+static int sas_get_phy_discover(struct domain_device *dev,
+ int phy_id, struct smp_resp *disc_resp)
+{
+ int res;
+ u8 *disc_req;
+
+ disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
+ if (!disc_req)
+ return -ENOMEM;
+
+ disc_req[1] = SMP_DISCOVER;
+ disc_req[9] = phy_id;
+
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ goto out;
+ else if (disc_resp->result != SMP_RESP_FUNC_ACC) {
+ res = disc_resp->result;
+ goto out;
+ }
+out:
+ kfree(disc_req);
+ return res;
+}
+
+static int sas_get_phy_change_count(struct domain_device *dev,
+ int phy_id, int *pcc)
+{
+ int res;
+ struct smp_resp *disc_resp;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (!res)
+ *pcc = disc_resp->disc.change_count;
+
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_get_phy_attached_sas_addr(struct domain_device *dev,
+ int phy_id, u8 *attached_sas_addr)
+{
+ int res;
+ struct smp_resp *disc_resp;
+ struct discover_resp *dr;
+
+ disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
+ if (!disc_resp)
+ return -ENOMEM;
+ dr = &disc_resp->disc;
+
+ res = sas_get_phy_discover(dev, phy_id, disc_resp);
+ if (!res) {
+ memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
+ if (dr->attached_dev_type == 0)
+ memset(attached_sas_addr, 0, 8);
+ }
+ kfree(disc_resp);
+ return res;
+}
+
+static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
+ int from_phy)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int res = 0;
+ int i;
+
+ for (i = from_phy; i < ex->num_phys; i++) {
+ int phy_change_count = 0;
+
+ res = sas_get_phy_change_count(dev, i, &phy_change_count);
+ if (res)
+ goto out;
+ else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
+ ex->ex_phy[i].phy_change_count = phy_change_count;
+ *phy_id = i;
+ return 0;
+ }
+ }
+out:
+ return res;
+}
+
+static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
+{
+ int res;
+ u8 *rg_req;
+ struct smp_resp *rg_resp;
+
+ rg_req = alloc_smp_req(RG_REQ_SIZE);
+ if (!rg_req)
+ return -ENOMEM;
+
+ rg_resp = alloc_smp_resp(RG_RESP_SIZE);
+ if (!rg_resp) {
+ kfree(rg_req);
+ return -ENOMEM;
+ }
+
+ rg_req[1] = SMP_REPORT_GENERAL;
+
+ res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
+ RG_RESP_SIZE);
+ if (res)
+ goto out;
+ if (rg_resp->result != SMP_RESP_FUNC_ACC) {
+ res = rg_resp->result;
+ goto out;
+ }
+
+ *ecc = be16_to_cpu(rg_resp->rg.change_count);
+out:
+ kfree(rg_resp);
+ kfree(rg_req);
+ return res;
+}
+
+static int sas_find_bcast_dev(struct domain_device *dev,
+ struct domain_device **src_dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ int ex_change_count = -1;
+ int res;
+
+ res = sas_get_ex_change_count(dev, &ex_change_count);
+ if (res)
+ goto out;
+ if (ex_change_count != -1 &&
+ ex_change_count != ex->ex_change_count) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ } else {
+ struct domain_device *ch;
+
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == EDGE_DEV ||
+ ch->dev_type == FANOUT_DEV) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (src_dev)
+ return res;
+ }
+ }
+ }
+out:
+ return res;
+}
+
+static void sas_unregister_ex_tree(struct domain_device *dev)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct domain_device *child, *n;
+
+ list_for_each_entry_safe(child, n, &ex->children, siblings) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ }
+ sas_unregister_dev(dev);
+}
+
+static void sas_unregister_devs_sas_addr(struct domain_device *parent,
+ int phy_id)
+{
+ struct expander_device *ex_dev = &parent->ex_dev;
+ struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
+ struct domain_device *child, *n;
+
+ list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ break;
+ }
+ }
+ sas_disable_routing(parent, phy->attached_sas_addr);
+ memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ sas_port_delete_phy(phy->port, phy->phy);
+ if (phy->port->num_phys == 0)
+ sas_port_delete(phy->port);
+ phy->port = NULL;
+}
+
+static int sas_discover_bfs_by_root_level(struct domain_device *root,
+ const int level)
+{
+ struct expander_device *ex_root = &root->ex_dev;
+ struct domain_device *child;
+ int res = 0;
+
+ list_for_each_entry(child, &ex_root->children, siblings) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV) {
+ struct sas_expander_device *ex =
+ rphy_to_expander_device(child->rphy);
+
+ if (level > ex->level)
+ res = sas_discover_bfs_by_root_level(child,
+ level);
+ else if (level == ex->level)
+ res = sas_ex_discover_devices(child, -1);
+ }
+ }
+ return res;
+}
+
+static int sas_discover_bfs_by_root(struct domain_device *dev)
+{
+ int res;
+ struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
+ int level = ex->level+1;
+
+ res = sas_ex_discover_devices(dev, -1);
+ if (res)
+ goto out;
+ do {
+ res = sas_discover_bfs_by_root_level(dev, level);
+ mb();
+ level += 1;
+ } while (level <= dev->port->disc.max_level);
+out:
+ return res;
+}
+
+static int sas_discover_new(struct domain_device *dev, int phy_id)
+{
+ struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
+ struct domain_device *child;
+ int res;
+
+ SAS_DPRINTK("ex %016llx phy%d new device attached\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+ res = sas_ex_phy_discover(dev, phy_id);
+ if (res)
+ goto out;
+ res = sas_ex_discover_devices(dev, phy_id);
+ if (res)
+ goto out;
+ list_for_each_entry(child, &dev->ex_dev.children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ res = sas_discover_bfs_by_root(child);
+ break;
+ }
+ }
+out:
+ return res;
+}
+
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *phy = &ex->ex_phy[phy_id];
+ u8 attached_sas_addr[8];
+ int res;
+
+ res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
+ switch (res) {
+ case SMP_RESP_NO_PHY:
+ phy->phy_state = PHY_NOT_PRESENT;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ goto out; break;
+ case SMP_RESP_PHY_VACANT:
+ phy->phy_state = PHY_VACANT;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ goto out; break;
+ case SMP_RESP_FUNC_ACC:
+ break;
+ }
+
+ if (SAS_ADDR(attached_sas_addr) == 0) {
+ phy->phy_state = PHY_EMPTY;
+ sas_unregister_devs_sas_addr(dev, phy_id);
+ } else if (SAS_ADDR(attached_sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+ } else
+ res = sas_discover_new(dev, phy_id);
+out:
+ return res;
+}
+
+static int sas_rediscover(struct domain_device *dev, const int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
+ int res = 0;
+ int i;
+
+ SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
+ SAS_ADDR(dev->sas_addr), phy_id);
+
+ if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
+ for (i = 0; i < ex->num_phys; i++) {
+ struct ex_phy *phy = &ex->ex_phy[i];
+
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(changed_phy->attached_sas_addr)) {
+ SAS_DPRINTK("phy%d part of wide port with "
+ "phy%d\n", phy_id, i);
+ goto out;
+ }
+ }
+ res = sas_rediscover_dev(dev, phy_id);
+ } else
+ res = sas_discover_new(dev, phy_id);
+out:
+ return res;
+}
+
+/**
+ * sas_revalidate_domain -- revalidate the domain
+ * @port: port to the domain of interest
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.
+ */
+int sas_ex_revalidate_domain(struct domain_device *port_dev)
+{
+ int res;
+ struct domain_device *dev = NULL;
+
+ res = sas_find_bcast_dev(port_dev, &dev);
+ if (res)
+ goto out;
+ if (dev) {
+ struct expander_device *ex = &dev->ex_dev;
+ int i = 0, phy_id;
+
+ do {
+ phy_id = -1;
+ res = sas_find_bcast_phy(dev, &phy_id, i);
+ if (phy_id == -1)
+ break;
+ res = sas_rediscover(dev, phy_id);
+ i = phy_id + 1;
+ } while (i < ex->num_phys);
+ }
+out:
+ return res;
+}
+
+#if 0
+/* ---------- SMP portal ---------- */
+
+static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
+ size_t size)
+{
+ struct domain_device *dev = to_dom_device(kobj);
+ struct expander_device *ex = &dev->ex_dev;
+
+ if (offs != 0)
+ return -EFBIG;
+ else if (size == 0)
+ return 0;
+
+ down_interruptible(&ex->smp_sema);
+ if (ex->smp_req)
+ kfree(ex->smp_req);
+ ex->smp_req = kzalloc(size, GFP_USER);
+ if (!ex->smp_req) {
+ up(&ex->smp_sema);
+ return -ENOMEM;
+ }
+ memcpy(ex->smp_req, buf, size);
+ ex->smp_req_size = size;
+ ex->smp_portal_pid = current->pid;
+ up(&ex->smp_sema);
+
+ return size;
+}
+
+static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
+ size_t size)
+{
+ struct domain_device *dev = to_dom_device(kobj);
+ struct expander_device *ex = &dev->ex_dev;
+ u8 *smp_resp;
+ int res = -EINVAL;
+
+ /* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
+ * it should be 0.
+ */
+
+ down_interruptible(&ex->smp_sema);
+ if (!ex->smp_req || ex->smp_portal_pid != current->pid)
+ goto out;
+
+ res = 0;
+ if (size == 0)
+ goto out;
+
+ res = -ENOMEM;
+ smp_resp = alloc_smp_resp(size);
+ if (!smp_resp)
+ goto out;
+ res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
+ smp_resp, size);
+ if (!res) {
+ memcpy(buf, smp_resp, size);
+ res = size;
+ }
+
+ kfree(smp_resp);
+out:
+ kfree(ex->smp_req);
+ ex->smp_req = NULL;
+ ex->smp_req_size = 0;
+ ex->smp_portal_pid = -1;
+ up(&ex->smp_sema);
+ return res;
+}
+#endif
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Transport Layer initialization
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+
+#include "sas_internal.h"
+
+#include "../scsi_sas_internal.h"
+
+kmem_cache_t *sas_task_cache;
+
+/*------------ SAS addr hash -----------*/
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr)
+{
+ const u32 poly = 0x00DB2777;
+ u32 r = 0;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ int b;
+ for (b = 7; b >= 0; b--) {
+ r <<= 1;
+ if ((1 << b) & sas_addr[i]) {
+ if (!(r & 0x01000000))
+ r ^= poly;
+ } else if (r & 0x01000000)
+ r ^= poly;
+ }
+ }
+
+ hashed[0] = (r >> 16) & 0xFF;
+ hashed[1] = (r >> 8) & 0xFF ;
+ hashed[2] = r & 0xFF;
+}
+
+
+/* ---------- HA events ---------- */
+
+void sas_hae_reset(void *data)
+{
+ struct sas_ha_struct *ha = data;
+
+ sas_begin_event(HAE_RESET, &ha->event_lock,
+ &ha->pending);
+}
+
+int sas_register_ha(struct sas_ha_struct *sas_ha)
+{
+ int error = 0;
+
+ spin_lock_init(&sas_ha->phy_port_lock);
+ sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
+
+ if (sas_ha->lldd_queue_size == 0)
+ sas_ha->lldd_queue_size = 1;
+ else if (sas_ha->lldd_queue_size == -1)
+ sas_ha->lldd_queue_size = 128; /* Sanity */
+
+ error = sas_register_phys(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+ return error;
+ }
+
+ error = sas_register_ports(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+ goto Undo_phys;
+ }
+
+ error = sas_init_events(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+ goto Undo_ports;
+ }
+
+ if (sas_ha->lldd_max_execute_num > 1) {
+ error = sas_init_queue(sas_ha);
+ if (error) {
+ printk(KERN_NOTICE "couldn't start queue thread:%d, "
+ "running in direct mode\n", error);
+ sas_ha->lldd_max_execute_num = 1;
+ }
+ }
+
+ return 0;
+
+Undo_ports:
+ sas_unregister_ports(sas_ha);
+Undo_phys:
+
+ return error;
+}
+
+int sas_unregister_ha(struct sas_ha_struct *sas_ha)
+{
+ if (sas_ha->lldd_max_execute_num > 1) {
+ sas_shutdown_queue(sas_ha);
+ }
+
+ sas_unregister_ports(sas_ha);
+
+ return 0;
+}
+
+static int sas_get_linkerrors(struct sas_phy *phy)
+{
+ if (scsi_is_sas_phy_local(phy))
+ /* FIXME: we have no local phy stats
+ * gathering at this time */
+ return -EINVAL;
+
+ return sas_smp_get_phy_events(phy);
+}
+
+static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ int ret;
+ enum phy_func reset_type;
+
+ if (hard_reset)
+ reset_type = PHY_FUNC_HARD_RESET;
+ else
+ reset_type = PHY_FUNC_LINK_RESET;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ ret = i->dft->lldd_control_phy(asd_phy, reset_type);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number, reset_type);
+ }
+ return ret;
+}
+
+static struct sas_function_template sft = {
+ .phy_reset = sas_phy_reset,
+ .get_linkerrors = sas_get_linkerrors,
+};
+
+struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *dft)
+{
+ struct scsi_transport_template *stt = sas_attach_transport(&sft);
+ struct sas_internal *i;
+
+ if (!stt)
+ return stt;
+
+ i = to_sas_internal(stt);
+ i->dft = dft;
+ stt->create_work_queue = 1;
+ stt->eh_timed_out = sas_scsi_timed_out;
+ stt->eh_strategy_handler = sas_scsi_recover_host;
+
+ return stt;
+}
+EXPORT_SYMBOL_GPL(sas_domain_attach_transport);
+
+
+void sas_domain_release_transport(struct scsi_transport_template *stt)
+{
+ sas_release_transport(stt);
+}
+EXPORT_SYMBOL_GPL(sas_domain_release_transport);
+
+/* ---------- SAS Class register/unregister ---------- */
+
+static int __init sas_class_init(void)
+{
+ sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task),
+ 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ if (!sas_task_cache)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void __exit sas_class_exit(void)
+{
+ kmem_cache_destroy(sas_task_cache);
+}
+
+MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>");
+MODULE_DESCRIPTION("SAS Transport Layer");
+MODULE_LICENSE("GPL v2");
+
+module_init(sas_class_init);
+module_exit(sas_class_exit);
+
+EXPORT_SYMBOL_GPL(sas_register_ha);
+EXPORT_SYMBOL_GPL(sas_unregister_ha);
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) class internal header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_INTERNAL_H_
+#define _SAS_INTERNAL_H_
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/libsas.h>
+
+#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+
+#ifdef SAS_DEBUG
+#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
+#else
+#define SAS_DPRINTK(fmt, ...)
+#endif
+
+void sas_scsi_recover_host(struct Scsi_Host *shost);
+
+int sas_show_class(enum sas_class class, char *buf);
+int sas_show_proto(enum sas_proto proto, char *buf);
+int sas_show_linkrate(enum sas_phy_linkrate linkrate, char *buf);
+int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
+
+int sas_register_phys(struct sas_ha_struct *sas_ha);
+void sas_unregister_phys(struct sas_ha_struct *sas_ha);
+
+int sas_register_ports(struct sas_ha_struct *sas_ha);
+void sas_unregister_ports(struct sas_ha_struct *sas_ha);
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
+
+int sas_init_queue(struct sas_ha_struct *sas_ha);
+int sas_init_events(struct sas_ha_struct *sas_ha);
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
+
+void sas_deform_port(struct asd_sas_phy *phy);
+
+void sas_porte_bytes_dmaed(void *);
+void sas_porte_broadcast_rcvd(void *);
+void sas_porte_link_reset_err(void *);
+void sas_porte_timer_event(void *);
+void sas_porte_hard_reset(void *);
+
+int sas_notify_lldd_dev_found(struct domain_device *);
+void sas_notify_lldd_dev_gone(struct domain_device *);
+
+int sas_smp_phy_control(struct domain_device *dev, int phy_id,
+ enum phy_func phy_func);
+int sas_smp_get_phy_events(struct sas_phy *phy);
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
+
+void sas_hae_reset(void *);
+
+static inline void sas_queue_event(int event, spinlock_t *lock,
+ unsigned long *pending,
+ struct work_struct *work,
+ struct Scsi_Host *shost)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+ if (test_bit(event, pending)) {
+ spin_unlock_irqrestore(lock, flags);
+ return;
+ }
+ __set_bit(event, pending);
+ spin_unlock_irqrestore(lock, flags);
+ scsi_queue_work(shost, work);
+}
+
+static inline void sas_begin_event(int event, spinlock_t *lock,
+ unsigned long *pending)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(lock, flags);
+ __clear_bit(event, pending);
+ spin_unlock_irqrestore(lock, flags);
+}
+
+static inline void sas_fill_in_rphy(struct domain_device *dev,
+ struct sas_rphy *rphy)
+{
+ rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
+ rphy->identify.initiator_port_protocols = dev->iproto;
+ rphy->identify.target_port_protocols = dev->tproto;
+ switch (dev->dev_type) {
+ case SATA_DEV:
+ /* FIXME: need sata device type */
+ case SAS_END_DEV:
+ rphy->identify.device_type = SAS_END_DEVICE;
+ break;
+ case EDGE_DEV:
+ rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
+ break;
+ case FANOUT_DEV:
+ rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
+ break;
+ default:
+ rphy->identify.device_type = SAS_PHY_UNUSED;
+ break;
+ }
+}
+
+static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
+{
+ struct expander_device *ex = &dev->ex_dev;
+ struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
+
+ if (!ex->parent_port) {
+ ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
+ /* FIXME: error handling */
+ BUG_ON(!ex->parent_port);
+ BUG_ON(sas_port_add(ex->parent_port));
+ sas_port_mark_backlink(ex->parent_port);
+ }
+ sas_port_add_phy(ex->parent_port, ex_phy->phy);
+}
+
+#endif /* _SAS_INTERNAL_H_ */
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Phy class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/* ---------- Phy events ---------- */
+
+static void sas_phye_loss_of_signal(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+ phy->error = 0;
+ sas_deform_port(phy);
+}
+
+static void sas_phye_oob_done(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+ phy->error = 0;
+}
+
+static void sas_phye_oob_error(void *data)
+{
+ struct asd_sas_phy *phy = data;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+
+ sas_deform_port(phy);
+
+ if (!port && phy->enabled && i->dft->lldd_control_phy) {
+ phy->error++;
+ switch (phy->error) {
+ case 1:
+ case 2:
+ i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET);
+ break;
+ case 3:
+ default:
+ phy->error = 0;
+ phy->enabled = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE);
+ break;
+ }
+ }
+}
+
+static void sas_phye_spinup_hold(void *data)
+{
+ struct asd_sas_phy *phy = data;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock,
+ &phy->phy_events_pending);
+
+ phy->error = 0;
+ i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD);
+}
+
+/* ---------- Phy class registration ---------- */
+
+int sas_register_phys(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = {
+ [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal,
+ [PHYE_OOB_DONE] = sas_phye_oob_done,
+ [PHYE_OOB_ERROR] = sas_phye_oob_error,
+ [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold,
+ };
+
+ static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = {
+ [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed,
+ [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd,
+ [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err,
+ [PORTE_TIMER_EVENT] = sas_porte_timer_event,
+ [PORTE_HARD_RESET] = sas_porte_hard_reset,
+ };
+
+ /* Now register the phys. */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ int k;
+ struct asd_sas_phy *phy = sas_ha->sas_phy[i];
+
+ phy->error = 0;
+ INIT_LIST_HEAD(&phy->port_phy_el);
+ for (k = 0; k < PORT_NUM_EVENTS; k++)
+ INIT_WORK(&phy->port_events[k], sas_port_event_fns[k],
+ phy);
+
+ for (k = 0; k < PHY_NUM_EVENTS; k++)
+ INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k],
+ phy);
+ phy->port = NULL;
+ phy->ha = sas_ha;
+ spin_lock_init(&phy->frame_rcvd_lock);
+ spin_lock_init(&phy->sas_prim_lock);
+ phy->frame_rcvd_size = 0;
+
+ phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev,
+ i);
+ if (!phy->phy)
+ return -ENOMEM;
+
+ phy->phy->identify.initiator_port_protocols =
+ phy->iproto;
+ phy->phy->identify.target_port_protocols = phy->tproto;
+ phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
+ phy->phy->identify.phy_identifier = i;
+ phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ sas_phy_add(phy->phy);
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) Port class
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+/**
+ * sas_form_port -- add this phy to a port
+ * @phy: the phy of interest
+ *
+ * This function adds this phy to an existing port, thus creating a wide
+ * port, or it creates a port and adds the phy to the port.
+ */
+static void sas_form_port(struct asd_sas_phy *phy)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (port) {
+ if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE) == 0)
+ sas_deform_port(phy);
+ else {
+ SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+ __FUNCTION__, phy->id, phy->port->id,
+ phy->port->num_phys);
+ return;
+ }
+ }
+
+ /* find a port */
+ spin_lock(&sas_ha->phy_port_lock);
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *) port->sas_addr &&
+ memcmp(port->attached_sas_addr,
+ phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
+ port->num_phys > 0) {
+ /* wide port */
+ SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+ port->id);
+ break;
+ } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
+ memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+
+ if (i >= sas_ha->num_phys) {
+ printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
+ __FUNCTION__);
+ spin_unlock(&sas_ha->phy_port_lock);
+ return;
+ }
+
+ /* add the phy to the port */
+ list_add_tail(&phy->port_phy_el, &port->phy_list);
+ phy->port = port;
+ port->num_phys++;
+ port->phy_mask |= (1U << phy->id);
+
+ if (!port->phy)
+ port->phy = phy->phy;
+
+ SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
+ port->id, port->phy_mask);
+
+ if (*(u64 *)port->attached_sas_addr == 0) {
+ port->class = phy->class;
+ memcpy(port->attached_sas_addr, phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ port->iproto = phy->iproto;
+ port->tproto = phy->tproto;
+ port->oob_mode = phy->oob_mode;
+ port->linkrate = phy->linkrate;
+ } else
+ port->linkrate = max(port->linkrate, phy->linkrate);
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ if (!port->port) {
+ port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
+ BUG_ON(!port->port);
+ sas_port_add(port->port);
+ }
+ sas_port_add_phy(port->port, phy->phy);
+
+ if (port->port_dev)
+ port->port_dev->pathways = port->num_phys;
+
+ /* Tell the LLDD about this port formation. */
+ if (si->dft->lldd_port_formed)
+ si->dft->lldd_port_formed(phy);
+
+ sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
+}
+
+/**
+ * sas_deform_port -- remove this phy from the port it belongs to
+ * @phy: the phy of interest
+ *
+ * This is called when the physical link to the other phy has been
+ * lost (on this phy), in Event thread context. We cannot delay here.
+ */
+void sas_deform_port(struct asd_sas_phy *phy)
+{
+ struct sas_ha_struct *sas_ha = phy->ha;
+ struct asd_sas_port *port = phy->port;
+ struct sas_internal *si =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (!port)
+ return; /* done by a phy event */
+
+ if (port->port_dev)
+ port->port_dev->pathways--;
+
+ if (port->num_phys == 1) {
+ sas_unregister_domain_devices(port);
+ sas_port_delete(port->port);
+ port->port = NULL;
+ } else
+ sas_port_delete_phy(port->port, phy->phy);
+
+
+ if (si->dft->lldd_port_deformed)
+ si->dft->lldd_port_deformed(phy);
+
+ spin_lock(&sas_ha->phy_port_lock);
+ spin_lock(&port->phy_list_lock);
+
+ list_del_init(&phy->port_phy_el);
+ phy->port = NULL;
+ port->num_phys--;
+ port->phy_mask &= ~(1U << phy->id);
+
+ if (port->num_phys == 0) {
+ INIT_LIST_HEAD(&port->phy_list);
+ memset(port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ port->class = 0;
+ port->iproto = 0;
+ port->tproto = 0;
+ port->oob_mode = 0;
+ port->phy_mask = 0;
+ }
+ spin_unlock(&port->phy_list_lock);
+ spin_unlock(&sas_ha->phy_port_lock);
+
+ return;
+}
+
+/* ---------- SAS port events ---------- */
+
+void sas_porte_bytes_dmaed(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_form_port(phy);
+}
+
+void sas_porte_broadcast_rcvd(void *data)
+{
+ unsigned long flags;
+ u32 prim;
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ spin_lock_irqsave(&phy->sas_prim_lock, flags);
+ prim = phy->sas_prim;
+ spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
+
+ SAS_DPRINTK("broadcast received: %d\n", prim);
+ sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
+}
+
+void sas_porte_link_reset_err(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_timer_event(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+void sas_porte_hard_reset(void *data)
+{
+ struct asd_sas_phy *phy = data;
+
+ sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock,
+ &phy->port_events_pending);
+
+ sas_deform_port(phy);
+}
+
+/* ---------- SAS port registration ---------- */
+
+static void sas_init_port(struct asd_sas_port *port,
+ struct sas_ha_struct *sas_ha, int i)
+{
+ port->id = i;
+ INIT_LIST_HEAD(&port->dev_list);
+ spin_lock_init(&port->phy_list_lock);
+ INIT_LIST_HEAD(&port->phy_list);
+ port->num_phys = 0;
+ port->phy_mask = 0;
+ port->ha = sas_ha;
+
+ spin_lock_init(&port->dev_list_lock);
+}
+
+int sas_register_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ /* initialize the ports and discovery */
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ struct asd_sas_port *port = sas_ha->sas_port[i];
+
+ sas_init_port(port, sas_ha, i);
+ sas_init_disc(&port->disc, port);
+ }
+ return 0;
+}
+
+void sas_unregister_ports(struct sas_ha_struct *sas_ha)
+{
+ int i;
+
+ for (i = 0; i < sas_ha->num_phys; i++)
+ if (sas_ha->sas_phy[i]->port)
+ sas_deform_port(sas_ha->sas_phy[i]);
+
+}
--- /dev/null
+/*
+ * Serial Attached SCSI (SAS) class SCSI Host glue.
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+#include <linux/err.h>
+#include <linux/blkdev.h>
+#include <linux/scatterlist.h>
+
+/* ---------- SCSI Host glue ---------- */
+
+#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
+static void sas_scsi_task_done(struct sas_task *task)
+{
+ struct task_status_struct *ts = &task->task_status;
+ struct scsi_cmnd *sc = task->uldd_task;
+ unsigned ts_flags = task->task_state_flags;
+ int hs = 0, stat = 0;
+
+ if (unlikely(!sc)) {
+ SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+ list_del_init(&task->list);
+ sas_free_task(task);
+ return;
+ }
+
+ if (ts->resp == SAS_TASK_UNDELIVERED) {
+ /* transport error */
+ hs = DID_NO_CONNECT;
+ } else { /* ts->resp == SAS_TASK_COMPLETE */
+ /* task delivered, what happened afterwards? */
+ switch (ts->stat) {
+ case SAS_DEV_NO_RESPONSE:
+ case SAS_INTERRUPTED:
+ case SAS_PHY_DOWN:
+ case SAS_NAK_R_ERR:
+ case SAS_OPEN_TO:
+ hs = DID_NO_CONNECT;
+ break;
+ case SAS_DATA_UNDERRUN:
+ sc->resid = ts->residual;
+ if (sc->request_bufflen - sc->resid < sc->underflow)
+ hs = DID_ERROR;
+ break;
+ case SAS_DATA_OVERRUN:
+ hs = DID_ERROR;
+ break;
+ case SAS_QUEUE_FULL:
+ hs = DID_SOFT_ERROR; /* retry */
+ break;
+ case SAS_DEVICE_UNKNOWN:
+ hs = DID_BAD_TARGET;
+ break;
+ case SAS_SG_ERR:
+ hs = DID_PARITY;
+ break;
+ case SAS_OPEN_REJECT:
+ if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY)
+ hs = DID_SOFT_ERROR; /* retry */
+ else
+ hs = DID_ERROR;
+ break;
+ case SAS_PROTO_RESPONSE:
+ SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
+ "task; please report this\n",
+ task->dev->port->ha->sas_ha_name);
+ break;
+ case SAS_ABORTED_TASK:
+ hs = DID_ABORT;
+ break;
+ case SAM_CHECK_COND:
+ memcpy(sc->sense_buffer, ts->buf,
+ max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+ stat = SAM_CHECK_COND;
+ break;
+ default:
+ stat = ts->stat;
+ break;
+ }
+ }
+ ASSIGN_SAS_TASK(sc, NULL);
+ sc->result = (hs << 16) | stat;
+ list_del_init(&task->list);
+ sas_free_task(task);
+ /* This is very ugly but this is how SCSI Core works. */
+ if (ts_flags & SAS_TASK_STATE_ABORTED)
+ scsi_finish_command(sc);
+ else
+ sc->scsi_done(sc);
+}
+
+static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
+{
+ enum task_attribute ta = TASK_ATTR_SIMPLE;
+ if (cmd->request && blk_rq_tagged(cmd->request)) {
+ if (cmd->device->ordered_tags &&
+ (cmd->request->flags & REQ_HARDBARRIER))
+ ta = TASK_ATTR_HOQ;
+ }
+ return ta;
+}
+
+static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
+ struct domain_device *dev,
+ unsigned long gfp_flags)
+{
+ struct sas_task *task = sas_alloc_task(gfp_flags);
+ struct scsi_lun lun;
+
+ if (!task)
+ return NULL;
+
+ *(u32 *)cmd->sense_buffer = 0;
+ task->uldd_task = cmd;
+ ASSIGN_SAS_TASK(cmd, task);
+
+ task->dev = dev;
+ task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */
+
+ task->ssp_task.retry_count = 1;
+ int_to_scsilun(cmd->device->lun, &lun);
+ memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8);
+ task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd);
+ memcpy(task->ssp_task.cdb, cmd->cmnd, 16);
+
+ task->scatter = cmd->request_buffer;
+ task->num_scatter = cmd->use_sg;
+ task->total_xfer_len = cmd->request_bufflen;
+ task->data_dir = cmd->sc_data_direction;
+
+ task->task_done = sas_scsi_task_done;
+
+ return task;
+}
+
+static int sas_queue_up(struct sas_task *task)
+{
+ struct sas_ha_struct *sas_ha = task->dev->port->ha;
+ struct scsi_core *core = &sas_ha->core;
+ unsigned long flags;
+ LIST_HEAD(list);
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ return -SAS_QUEUE_FULL;
+ }
+ list_add_tail(&task->list, &core->task_queue);
+ core->task_queue_size += 1;
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ up(&core->queue_thread_sema);
+
+ return 0;
+}
+
+/**
+ * sas_queuecommand -- Enqueue a command for processing
+ * @parameters: See SCSI Core documentation
+ *
+ * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
+ * call us without holding an IRQ spinlock...
+ */
+int sas_queuecommand(struct scsi_cmnd *cmd,
+ void (*scsi_done)(struct scsi_cmnd *))
+{
+ int res = 0;
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct Scsi_Host *host = cmd->device->host;
+ struct sas_internal *i = to_sas_internal(host->transportt);
+
+ spin_unlock_irq(host->host_lock);
+
+ {
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct sas_task *task;
+
+ res = -ENOMEM;
+ task = sas_create_task(cmd, dev, GFP_ATOMIC);
+ if (!task)
+ goto out;
+
+ cmd->scsi_done = scsi_done;
+ /* Queue up, Direct Mode or Task Collector Mode. */
+ if (sas_ha->lldd_max_execute_num < 2)
+ res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+ else
+ res = sas_queue_up(task);
+
+ /* Examine */
+ if (res) {
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ if (res == -SAS_QUEUE_FULL) {
+ cmd->result = DID_SOFT_ERROR << 16; /* retry */
+ res = 0;
+ scsi_done(cmd);
+ }
+ goto out;
+ }
+ }
+out:
+ spin_lock_irq(host->host_lock);
+ return res;
+}
+
+static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ if (cmd == my_cmd)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+static void sas_scsi_clear_queue_I_T(struct list_head *error_q,
+ struct domain_device *dev)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *x = cmd_to_domain_dev(cmd);
+
+ if (x == dev)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+static void sas_scsi_clear_queue_port(struct list_head *error_q,
+ struct asd_sas_port *port)
+{
+ struct scsi_cmnd *cmd, *n;
+
+ list_for_each_entry_safe(cmd, n, error_q, eh_entry) {
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct asd_sas_port *x = dev->port;
+
+ if (x == port)
+ list_del_init(&cmd->eh_entry);
+ }
+}
+
+enum task_disposition {
+ TASK_IS_DONE,
+ TASK_IS_ABORTED,
+ TASK_IS_AT_LU,
+ TASK_IS_NOT_AT_LU,
+};
+
+static enum task_disposition sas_scsi_find_task(struct sas_task *task)
+{
+ struct sas_ha_struct *ha = task->dev->port->ha;
+ unsigned long flags;
+ int i, res;
+ struct sas_internal *si =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+ if (ha->lldd_max_execute_num > 1) {
+ struct scsi_core *core = &ha->core;
+ struct sas_task *t, *n;
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ list_for_each_entry_safe(t, n, &core->task_queue, list) {
+ if (task == t) {
+ list_del_init(&t->list);
+ spin_unlock_irqrestore(&core->task_queue_lock,
+ flags);
+ SAS_DPRINTK("%s: task 0x%p aborted from "
+ "task_queue\n",
+ __FUNCTION__, task);
+ return TASK_IS_ABORTED;
+ }
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ }
+
+ for (i = 0; i < 5; i++) {
+ SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
+ res = si->dft->lldd_abort_task(task);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ task);
+ return TASK_IS_DONE;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __FUNCTION__, task);
+ return TASK_IS_ABORTED;
+ } else if (si->dft->lldd_query_task) {
+ SAS_DPRINTK("%s: querying task 0x%p\n",
+ __FUNCTION__, task);
+ res = si->dft->lldd_query_task(task);
+ if (res == TMF_RESP_FUNC_SUCC) {
+ SAS_DPRINTK("%s: task 0x%p at LU\n",
+ __FUNCTION__, task);
+ return TASK_IS_AT_LU;
+ } else if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("%s: task 0x%p not at LU\n",
+ __FUNCTION__, task);
+ return TASK_IS_NOT_AT_LU;
+ }
+ }
+ }
+ return res;
+}
+
+static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct scsi_lun lun;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ int_to_scsilun(cmd->device->lun, &lun);
+
+ SAS_DPRINTK("eh: device %llx LUN %x has the task\n",
+ SAS_ADDR(dev->sas_addr),
+ cmd->device->lun);
+
+ if (i->dft->lldd_abort_task_set)
+ res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun);
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_clear_task_set)
+ res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun);
+ }
+
+ if (res == TMF_RESP_FUNC_FAILED) {
+ if (i->dft->lldd_lu_reset)
+ res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+ }
+
+ return res;
+}
+
+static int sas_recover_I_T(struct domain_device *dev)
+{
+ int res = TMF_RESP_FUNC_FAILED;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+
+ SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+ SAS_ADDR(dev->sas_addr));
+
+ if (i->dft->lldd_I_T_nexus_reset)
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+
+ return res;
+}
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ unsigned long flags;
+ LIST_HEAD(error_q);
+ struct scsi_cmnd *cmd, *n;
+ enum task_disposition res = TASK_IS_DONE;
+ int tmf_resp;
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_splice_init(&shost->eh_cmd_q, &error_q);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+
+ /* All tasks on this list were marked SAS_TASK_STATE_ABORTED
+ * by sas_scsi_timed_out() callback.
+ */
+Again:
+ SAS_DPRINTK("going over list...\n");
+ list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ struct sas_task *task = TO_SAS_TASK(cmd);
+
+ SAS_DPRINTK("trying to find task 0x%p\n", task);
+ list_del_init(&cmd->eh_entry);
+ res = sas_scsi_find_task(task);
+
+ cmd->eh_eflags = 0;
+ shost->host_failed--;
+
+ switch (res) {
+ case TASK_IS_DONE:
+ SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
+ task);
+ task->task_done(task);
+ continue;
+ case TASK_IS_ABORTED:
+ SAS_DPRINTK("%s: task 0x%p is aborted\n",
+ __FUNCTION__, task);
+ task->task_done(task);
+ continue;
+ case TASK_IS_AT_LU:
+ SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ tmf_resp = sas_recover_lu(task->dev, cmd);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("dev %016llx LU %x is "
+ "recovered\n",
+ SAS_ADDR(task->dev),
+ cmd->device->lun);
+ task->task_done(task);
+ sas_scsi_clear_queue_lu(&error_q, cmd);
+ goto Again;
+ }
+ /* fallthrough */
+ case TASK_IS_NOT_AT_LU:
+ SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+ task);
+ tmf_resp = sas_recover_I_T(task->dev);
+ if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("I_T %016llx recovered\n",
+ SAS_ADDR(task->dev->sas_addr));
+ task->task_done(task);
+ sas_scsi_clear_queue_I_T(&error_q, task->dev);
+ goto Again;
+ }
+ /* Hammer time :-) */
+ if (i->dft->lldd_clear_nexus_port) {
+ struct asd_sas_port *port = task->dev->port;
+ SAS_DPRINTK("clearing nexus for port:%d\n",
+ port->id);
+ res = i->dft->lldd_clear_nexus_port(port);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus port:%d "
+ "succeeded\n", port->id);
+ task->task_done(task);
+ sas_scsi_clear_queue_port(&error_q,
+ port);
+ goto Again;
+ }
+ }
+ if (i->dft->lldd_clear_nexus_ha) {
+ SAS_DPRINTK("clear nexus ha\n");
+ res = i->dft->lldd_clear_nexus_ha(ha);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ SAS_DPRINTK("clear nexus ha "
+ "succeeded\n");
+ task->task_done(task);
+ goto out;
+ }
+ }
+ /* If we are here -- this means that no amount
+ * of effort could recover from errors. Quite
+ * possibly the HA just disappeared.
+ */
+ SAS_DPRINTK("error from device %llx, LUN %x "
+ "couldn't be recovered in any way\n",
+ SAS_ADDR(task->dev->sas_addr),
+ cmd->device->lun);
+
+ task->task_done(task);
+ goto clear_q;
+ }
+ }
+out:
+ SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+ return;
+clear_q:
+ SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
+ list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ struct sas_task *task = TO_SAS_TASK(cmd);
+ list_del_init(&cmd->eh_entry);
+ task->task_done(task);
+ }
+}
+
+enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct sas_task *task = TO_SAS_TASK(cmd);
+ unsigned long flags;
+
+ if (!task) {
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+ cmd, task);
+ return EH_HANDLED;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+ cmd, task);
+ return EH_HANDLED;
+ }
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n",
+ cmd, task);
+
+ return EH_NOT_HANDLED;
+}
+
+struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct domain_device *found_dev = NULL;
+ int i;
+
+ spin_lock(&ha->phy_port_lock);
+ for (i = 0; i < ha->num_phys; i++) {
+ struct asd_sas_port *port = ha->sas_port[i];
+ struct domain_device *dev;
+
+ spin_lock(&port->dev_list_lock);
+ list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ if (rphy == dev->rphy) {
+ found_dev = dev;
+ spin_unlock(&port->dev_list_lock);
+ goto found;
+ }
+ }
+ spin_unlock(&port->dev_list_lock);
+ }
+ found:
+ spin_unlock(&ha->phy_port_lock);
+
+ return found_dev;
+}
+
+static inline struct domain_device *sas_find_target(struct scsi_target *starget)
+{
+ struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent);
+
+ return sas_find_dev_by_rphy(rphy);
+}
+
+int sas_target_alloc(struct scsi_target *starget)
+{
+ struct domain_device *found_dev = sas_find_target(starget);
+
+ if (!found_dev)
+ return -ENODEV;
+
+ starget->hostdata = found_dev;
+ return 0;
+}
+
+#define SAS_DEF_QD 32
+#define SAS_MAX_QD 64
+
+int sas_slave_configure(struct scsi_device *scsi_dev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ struct sas_ha_struct *sas_ha;
+
+ BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
+
+ sas_ha = dev->port->ha;
+
+ sas_read_port_mode_page(scsi_dev);
+
+ if (scsi_dev->tagged_supported) {
+ scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG);
+ scsi_activate_tcq(scsi_dev, SAS_DEF_QD);
+ } else {
+ SAS_DPRINTK("device %llx, LUN %x doesn't support "
+ "TCQ\n", SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
+ scsi_dev->tagged_supported = 0;
+ scsi_set_tag_type(scsi_dev, 0);
+ scsi_deactivate_tcq(scsi_dev, 1);
+ }
+
+ return 0;
+}
+
+void sas_slave_destroy(struct scsi_device *scsi_dev)
+{
+}
+
+int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
+{
+ int res = min(new_depth, SAS_MAX_QD);
+
+ if (scsi_dev->tagged_supported)
+ scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
+ res);
+ else {
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ sas_printk("device %llx LUN %x queue depth changed to 1\n",
+ SAS_ADDR(dev->sas_addr),
+ scsi_dev->lun);
+ scsi_adjust_queue_depth(scsi_dev, 0, 1);
+ res = 1;
+ }
+
+ return res;
+}
+
+int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
+{
+ if (!scsi_dev->tagged_supported)
+ return 0;
+
+ scsi_deactivate_tcq(scsi_dev, 1);
+
+ scsi_set_tag_type(scsi_dev, qt);
+ scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
+
+ return qt;
+}
+
+int sas_bios_param(struct scsi_device *scsi_dev,
+ struct block_device *bdev,
+ sector_t capacity, int *hsc)
+{
+ hsc[0] = 255;
+ hsc[1] = 63;
+ sector_div(capacity, 255*63);
+ hsc[2] = capacity;
+
+ return 0;
+}
+
+/* ---------- Task Collector Thread implementation ---------- */
+
+static void sas_queue(struct sas_ha_struct *sas_ha)
+{
+ struct scsi_core *core = &sas_ha->core;
+ unsigned long flags;
+ LIST_HEAD(q);
+ int can_queue;
+ int res;
+ struct sas_internal *i = to_sas_internal(core->shost->transportt);
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ while (!core->queue_thread_kill &&
+ !list_empty(&core->task_queue)) {
+
+ can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
+ if (can_queue >= 0) {
+ can_queue = core->task_queue_size;
+ list_splice_init(&core->task_queue, &q);
+ } else {
+ struct list_head *a, *n;
+
+ can_queue = sas_ha->lldd_queue_size;
+ list_for_each_safe(a, n, &core->task_queue) {
+ list_move_tail(a, &q);
+ if (--can_queue == 0)
+ break;
+ }
+ can_queue = sas_ha->lldd_queue_size;
+ }
+ core->task_queue_size -= can_queue;
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+ {
+ struct sas_task *task = list_entry(q.next,
+ struct sas_task,
+ list);
+ list_del_init(&q);
+ res = i->dft->lldd_execute_task(task, can_queue,
+ GFP_KERNEL);
+ if (unlikely(res))
+ __list_add(&q, task->list.prev, &task->list);
+ }
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ if (res) {
+ list_splice_init(&q, &core->task_queue); /*at head*/
+ core->task_queue_size += can_queue;
+ }
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+static DECLARE_COMPLETION(queue_th_comp);
+
+/**
+ * sas_queue_thread -- The Task Collector thread
+ * @_sas_ha: pointer to struct sas_ha
+ */
+static int sas_queue_thread(void *_sas_ha)
+{
+ struct sas_ha_struct *sas_ha = _sas_ha;
+ struct scsi_core *core = &sas_ha->core;
+
+ daemonize("sas_queue_%d", core->shost->host_no);
+ current->flags |= PF_NOFREEZE;
+
+ complete(&queue_th_comp);
+
+ while (1) {
+ down_interruptible(&core->queue_thread_sema);
+ sas_queue(sas_ha);
+ if (core->queue_thread_kill)
+ break;
+ }
+
+ complete(&queue_th_comp);
+
+ return 0;
+}
+
+int sas_init_queue(struct sas_ha_struct *sas_ha)
+{
+ int res;
+ struct scsi_core *core = &sas_ha->core;
+
+ spin_lock_init(&core->task_queue_lock);
+ core->task_queue_size = 0;
+ INIT_LIST_HEAD(&core->task_queue);
+ init_MUTEX_LOCKED(&core->queue_thread_sema);
+
+ res = kernel_thread(sas_queue_thread, sas_ha, 0);
+ if (res >= 0)
+ wait_for_completion(&queue_th_comp);
+
+ return res < 0 ? res : 0;
+}
+
+void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
+{
+ unsigned long flags;
+ struct scsi_core *core = &sas_ha->core;
+ struct sas_task *task, *n;
+
+ init_completion(&queue_th_comp);
+ core->queue_thread_kill = 1;
+ up(&core->queue_thread_sema);
+ wait_for_completion(&queue_th_comp);
+
+ if (!list_empty(&core->task_queue))
+ SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
+ SAS_ADDR(sas_ha->sas_addr));
+
+ spin_lock_irqsave(&core->task_queue_lock, flags);
+ list_for_each_entry_safe(task, n, &core->task_queue, list) {
+ struct scsi_cmnd *cmd = task->uldd_task;
+
+ list_del_init(&task->list);
+
+ ASSIGN_SAS_TASK(cmd, NULL);
+ sas_free_task(task);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd);
+ }
+ spin_unlock_irqrestore(&core->task_queue_lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(sas_queuecommand);
+EXPORT_SYMBOL_GPL(sas_target_alloc);
+EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_slave_destroy);
+EXPORT_SYMBOL_GPL(sas_change_queue_depth);
+EXPORT_SYMBOL_GPL(sas_change_queue_type);
+EXPORT_SYMBOL_GPL(sas_bios_param);
--- /dev/null
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/list.h>
+#include <asm/semaphore.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+
+struct block_device;
+
+enum sas_class {
+ SAS,
+ EXPANDER
+};
+
+enum sas_phy_role {
+ PHY_ROLE_NONE = 0,
+ PHY_ROLE_TARGET = 0x40,
+ PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+ PHY_TYPE_PHYSICAL,
+ PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+ HAE_RESET = 0U,
+ HA_NUM_EVENTS = 1,
+};
+
+enum port_event {
+ PORTE_BYTES_DMAED = 0U,
+ PORTE_BROADCAST_RCVD = 1,
+ PORTE_LINK_RESET_ERR = 2,
+ PORTE_TIMER_EVENT = 3,
+ PORTE_HARD_RESET = 4,
+ PORT_NUM_EVENTS = 5,
+};
+
+enum phy_event {
+ PHYE_LOSS_OF_SIGNAL = 0U,
+ PHYE_OOB_DONE = 1,
+ PHYE_OOB_ERROR = 2,
+ PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
+ PHY_NUM_EVENTS = 4,
+};
+
+enum discover_event {
+ DISCE_DISCOVER_DOMAIN = 0U,
+ DISCE_REVALIDATE_DOMAIN = 1,
+ DISCE_PORT_GONE = 2,
+ DISC_NUM_EVENTS = 3,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define ETASK 0xFA
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
+ attr)
+
+enum routing_attribute {
+ DIRECT_ROUTING,
+ SUBTRACTIVE_ROUTING,
+ TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+ PHY_EMPTY,
+ PHY_VACANT,
+ PHY_NOT_PRESENT,
+ PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+ int phy_id;
+
+ enum ex_phy_state phy_state;
+
+ enum sas_dev_type attached_dev_type;
+ enum sas_phy_linkrate linkrate;
+
+ u8 attached_sata_host:1;
+ u8 attached_sata_dev:1;
+ u8 attached_sata_ps:1;
+
+ enum sas_proto attached_tproto;
+ enum sas_proto attached_iproto;
+
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u8 attached_phy_id;
+
+ u8 phy_change_count;
+ enum routing_attribute routing_attr;
+ u8 virtual:1;
+
+ int last_da_index;
+
+ struct sas_phy *phy;
+ struct sas_port *port;
+};
+
+struct expander_device {
+ struct list_head children;
+
+ u16 ex_change_count;
+ u16 max_route_indexes;
+ u8 num_phys;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+ u8 enclosure_logical_id[8];
+
+ struct ex_phy *ex_phy;
+ struct sas_port *parent_port;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+ ATA_COMMAND_SET = 0,
+ ATAPI_COMMAND_SET = 1,
+};
+
+struct sata_device {
+ enum ata_command_set command_set;
+ struct smp_resp rps_resp; /* report_phy_sata_resp */
+ __le16 *identify_device;
+ __le16 *identify_packet_device;
+
+ u8 port_no; /* port number, if this is a PM (Port) */
+ struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- Domain device ---------- */
+struct domain_device {
+ enum sas_dev_type dev_type;
+
+ enum sas_phy_linkrate linkrate;
+ enum sas_phy_linkrate min_linkrate;
+ enum sas_phy_linkrate max_linkrate;
+
+ int pathways;
+
+ struct domain_device *parent;
+ struct list_head siblings; /* devices on the same level */
+ struct asd_sas_port *port; /* shortcut to root of the tree */
+
+ struct list_head dev_list_node;
+
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ struct sas_rphy *rphy;
+
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ u8 frame_rcvd[32];
+
+ union {
+ struct expander_device ex_dev;
+ struct sata_device sata_dev; /* STP & directly attached */
+ };
+
+ void *lldd_dev;
+};
+
+struct sas_discovery {
+ spinlock_t disc_event_lock;
+ struct work_struct disc_work[DISC_NUM_EVENTS];
+ unsigned long pending;
+ u8 fanout_sas_addr[8];
+ u8 eeds_a[8];
+ u8 eeds_b[8];
+ int max_level;
+};
+
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+ struct completion port_gone_completion;
+
+ struct sas_discovery disc;
+ struct domain_device *port_dev;
+ spinlock_t dev_list_lock;
+ struct list_head dev_list;
+ enum sas_phy_linkrate linkrate;
+
+ struct sas_phy *phy;
+ struct work_struct work;
+
+/* public: */
+ int id;
+
+ enum sas_class class;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_oob_mode oob_mode;
+
+ spinlock_t phy_list_lock;
+ struct list_head phy_list;
+ int num_phys;
+ u32 phy_mask;
+
+ struct sas_ha_struct *ha;
+
+ struct sas_port *port;
+
+ void *lldd_port; /* not touched by the sas class code */
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+ /* protected by ha->event_lock */
+ struct work_struct port_events[PORT_NUM_EVENTS];
+ struct work_struct phy_events[PHY_NUM_EVENTS];
+
+ unsigned long port_events_pending;
+ unsigned long phy_events_pending;
+
+ int error;
+
+ struct sas_phy *phy;
+
+/* public: */
+ /* The following are class:RO, driver:R/W */
+ int enabled; /* must be set */
+
+ int id; /* must be set */
+ enum sas_class class;
+ enum sas_proto iproto;
+ enum sas_proto tproto;
+
+ enum sas_phy_type type;
+ enum sas_phy_role role;
+ enum sas_oob_mode oob_mode;
+ enum sas_phy_linkrate linkrate;
+
+ u8 *sas_addr; /* must be set */
+ u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+ spinlock_t frame_rcvd_lock;
+ u8 *frame_rcvd; /* must be set */
+ int frame_rcvd_size;
+
+ spinlock_t sas_prim_lock;
+ u32 sas_prim;
+
+ struct list_head port_phy_el; /* driver:RO */
+ struct asd_sas_port *port; /* Class:RW, driver: RO */
+
+ struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+ void *lldd_phy; /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+ struct Scsi_Host *shost;
+
+ spinlock_t task_queue_lock;
+ struct list_head task_queue;
+ int task_queue_size;
+
+ struct semaphore queue_thread_sema;
+ int queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+ spinlock_t event_lock;
+ struct work_struct ha_events[HA_NUM_EVENTS];
+ unsigned long pending;
+
+ struct scsi_core core;
+
+/* public: */
+ char *sas_ha_name;
+ struct pci_dev *pcidev; /* should be set */
+ struct module *lldd_module; /* should be set */
+
+ u8 *sas_addr; /* must be set */
+ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+ spinlock_t phy_port_lock;
+ struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */
+ struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+ int num_phys; /* must be set, gt 0, static */
+
+ /* The class calls this to send a task for execution. */
+ int lldd_max_execute_num;
+ int lldd_queue_size;
+
+ /* LLDD calls these to notify the class of an event. */
+ void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+ void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+ void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+ void *lldd_ha; /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+ return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+ return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+ return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+ phy->oob_mode = OOB_NOT_CONNECTED;
+ phy->linkrate = PHY_LINKRATE_NONE;
+}
+
+/* ---------- Tasks ---------- */
+/*
+ service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
+ exec_status | | |
+ ---------------------+---------------------+-----------------------+
+ SAM_... | X | |
+ DEV_NO_RESPONSE | X | X |
+ INTERRUPTED | X | |
+ QUEUE_FULL | | X |
+ DEVICE_UNKNOWN | | X |
+ SG_ERR | | X |
+ ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+ SAS_TASK_COMPLETE,
+ SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+ SAM_GOOD = 0,
+ SAM_CHECK_COND = 2,
+ SAM_COND_MET = 4,
+ SAM_BUSY = 8,
+ SAM_INTERMEDIATE = 0x10,
+ SAM_IM_COND_MET = 0x12,
+ SAM_RESV_CONFLICT= 0x14,
+ SAM_TASK_SET_FULL= 0x28,
+ SAM_ACA_ACTIVE = 0x30,
+ SAM_TASK_ABORTED = 0x40,
+
+ SAS_DEV_NO_RESPONSE = 0x80,
+ SAS_DATA_UNDERRUN,
+ SAS_DATA_OVERRUN,
+ SAS_INTERRUPTED,
+ SAS_QUEUE_FULL,
+ SAS_DEVICE_UNKNOWN,
+ SAS_SG_ERR,
+ SAS_OPEN_REJECT,
+ SAS_OPEN_TO,
+ SAS_PROTO_RESPONSE,
+ SAS_PHY_DOWN,
+ SAS_NAK_R_ERR,
+ SAS_PENDING,
+ SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * - For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * - For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set. If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+ u16 frame_len;
+ u8 ending_fis[24]; /* dev to host or data-in */
+ u32 sstatus;
+ u32 serror;
+ u32 scontrol;
+ u32 sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+ enum service_response resp;
+ enum exec_status stat;
+ int buf_valid_size;
+
+ u8 buf[SAS_STATUS_BUF_SIZE];
+
+ u32 residual;
+ enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+ struct host_to_dev_fis fis;
+ u8 atapi_packet[16]; /* 0 if not ATAPI task */
+
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 dma_xfer:1; /* PIO:0 or DMA:1 */
+ u8 use_ncq:1;
+ u8 set_affil_pol:1;
+ u8 stp_affil_pol:1;
+
+ u8 device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+ struct scatterlist smp_req;
+ struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+ TASK_ATTR_SIMPLE = 0,
+ TASK_ATTR_HOQ = 1,
+ TASK_ATTR_ORDERED= 2,
+ TASK_ATTR_ACA = 4,
+};
+
+struct sas_ssp_task {
+ u8 retry_count; /* hardware retry, should be > 0 */
+
+ u8 LUN[8];
+ u8 enable_first_burst:1;
+ enum task_attribute task_attr;
+ u8 task_prio;
+ u8 cdb[16];
+};
+
+struct sas_task {
+ struct domain_device *dev;
+ struct list_head list;
+
+ spinlock_t task_state_lock;
+ unsigned task_state_flags;
+
+ enum sas_proto task_proto;
+
+ /* Used by the discovery code. */
+ struct timer_list timer;
+ struct completion completion;
+
+ union {
+ struct sas_ata_task ata_task;
+ struct sas_smp_task smp_task;
+ struct sas_ssp_task ssp_task;
+ };
+
+ struct scatterlist *scatter;
+ int num_scatter;
+ u32 total_xfer_len;
+ u8 data_dir:2; /* Use PCI_DMA_... */
+
+ struct task_status_struct task_status;
+ void (*task_done)(struct sas_task *);
+
+ void *lldd_task; /* for use by LLDDs */
+ void *uldd_task;
+};
+
+
+
+#define SAS_TASK_STATE_PENDING 1
+#define SAS_TASK_STATE_DONE 2
+#define SAS_TASK_STATE_ABORTED 4
+
+static inline struct sas_task *sas_alloc_task(unsigned long flags)
+{
+ extern kmem_cache_t *sas_task_cache;
+ struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+ if (task) {
+ memset(task, 0, sizeof(*task));
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+
+ return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+ if (task) {
+ extern kmem_cache_t *sas_task_cache;
+ BUG_ON(!list_empty(&task->list));
+ kmem_cache_free(sas_task_cache, task);
+ }
+}
+
+struct sas_domain_function_template {
+ /* The class calls these to notify the LLDD of an event. */
+ void (*lldd_port_formed)(struct asd_sas_phy *);
+ void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+ /* The class calls these when a device is found or gone. */
+ int (*lldd_dev_found)(struct domain_device *);
+ void (*lldd_dev_gone)(struct domain_device *);
+
+ int (*lldd_execute_task)(struct sas_task *, int num,
+ unsigned long gfp_flags);
+
+ /* Task Management Functions. Must be called from process context. */
+ int (*lldd_abort_task)(struct sas_task *);
+ int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+ int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+ int (*lldd_I_T_nexus_reset)(struct domain_device *);
+ int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+ int (*lldd_query_task)(struct sas_task *);
+
+ /* Port and Adapter management */
+ int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+ int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+ /* Phy management */
+ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+extern int sas_queuecommand(struct scsi_cmnd *,
+ void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_slave_configure(struct scsi_device *);
+extern void sas_slave_destroy(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+ struct block_device *,
+ sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int sas_discover_sata(struct domain_device *);
+int sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+#endif /* _SASLIB_H_ */
--- /dev/null
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE 8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST 0x40
+#define SMP_RESPONSE 0x41
+
+#define SSP_DATA 0x01
+#define SSP_XFER_RDY 0x05
+#define SSP_COMMAND 0x06
+#define SSP_RESPONSE 0x07
+#define SSP_TASK 0x16
+
+#define SMP_REPORT_GENERAL 0x00
+#define SMP_REPORT_MANUF_INFO 0x01
+#define SMP_READ_GPIO_REG 0x02
+#define SMP_DISCOVER 0x10
+#define SMP_REPORT_PHY_ERR_LOG 0x11
+#define SMP_REPORT_PHY_SATA 0x12
+#define SMP_REPORT_ROUTE_INFO 0x13
+#define SMP_WRITE_GPIO_REG 0x82
+#define SMP_CONF_ROUTE_INFO 0x90
+#define SMP_PHY_CONTROL 0x91
+#define SMP_PHY_TEST_FUNCTION 0x92
+
+#define SMP_RESP_FUNC_ACC 0x00
+#define SMP_RESP_FUNC_UNK 0x01
+#define SMP_RESP_FUNC_FAILED 0x02
+#define SMP_RESP_INV_FRM_LEN 0x03
+#define SMP_RESP_NO_PHY 0x10
+#define SMP_RESP_NO_INDEX 0x11
+#define SMP_RESP_PHY_NO_SATA 0x12
+#define SMP_RESP_PHY_UNK_OP 0x13
+#define SMP_RESP_PHY_UNK_TESTF 0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT 0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK 0x01
+#define TMF_ABORT_TASK_SET 0x02
+#define TMF_CLEAR_TASK_SET 0x04
+#define TMF_LU_RESET 0x08
+#define TMF_CLEAR_ACA 0x40
+#define TMF_QUERY_TASK 0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE 0x00
+#define TMF_RESP_INVALID_FRAME 0x02
+#define TMF_RESP_FUNC_ESUPP 0x04
+#define TMF_RESP_FUNC_FAILED 0x05
+#define TMF_RESP_FUNC_SUCC 0x08
+#define TMF_RESP_NO_LUN 0x09
+#define TMF_RESP_OVERLAPPED_TAG 0x0A
+
+enum sas_oob_mode {
+ OOB_NOT_CONNECTED,
+ SATA_OOB_MODE,
+ SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+ NO_DEVICE = 0, /* protocol */
+ SAS_END_DEV = 1, /* protocol */
+ EDGE_DEV = 2, /* protocol */
+ FANOUT_DEV = 3, /* protocol */
+ SAS_HA = 4,
+ SATA_DEV = 5,
+ SATA_PM = 7,
+ SATA_PM_PORT= 8,
+};
+
+enum sas_phy_linkrate {
+ PHY_LINKRATE_NONE = 0,
+ PHY_LINKRATE_UNKNOWN = 0,
+ PHY_DISABLED,
+ PHY_RESET_PROBLEM,
+ PHY_SPINUP_HOLD,
+ PHY_PORT_SELECTOR,
+ PHY_LINKRATE_1_5 = 0x08,
+ PHY_LINKRATE_G1 = PHY_LINKRATE_1_5,
+ PHY_LINKRATE_3 = 0x09,
+ PHY_LINKRATE_G2 = PHY_LINKRATE_3,
+ PHY_LINKRATE_6 = 0x0A,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+ SATA_PROTO = 1,
+ SAS_PROTO_SMP = 2, /* protocol */
+ SAS_PROTO_STP = 4, /* protocol */
+ SAS_PROTO_SSP = 8, /* protocol */
+ SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+ PHY_FUNC_NOP,
+ PHY_FUNC_LINK_RESET, /* Enables the phy */
+ PHY_FUNC_HARD_RESET,
+ PHY_FUNC_DISABLE,
+ PHY_FUNC_CLEAR_ERROR_LOG = 5,
+ PHY_FUNC_CLEAR_AFFIL,
+ PHY_FUNC_TX_SATA_PS_SIGNAL,
+ PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+ SAS_PRIM_AIP_NORMAL = 1,
+ SAS_PRIM_AIP_R0 = 2,
+ SAS_PRIM_AIP_R1 = 3,
+ SAS_PRIM_AIP_R2 = 4,
+ SAS_PRIM_AIP_WC = 5,
+ SAS_PRIM_AIP_WD = 6,
+ SAS_PRIM_AIP_WP = 7,
+ SAS_PRIM_AIP_RWP = 8,
+
+ SAS_PRIM_BC_CH = 9,
+ SAS_PRIM_BC_RCH0 = 10,
+ SAS_PRIM_BC_RCH1 = 11,
+ SAS_PRIM_BC_R0 = 12,
+ SAS_PRIM_BC_R1 = 13,
+ SAS_PRIM_BC_R2 = 14,
+ SAS_PRIM_BC_R3 = 15,
+ SAS_PRIM_BC_R4 = 16,
+
+ SAS_PRIM_NOTIFY_ENSP= 17,
+ SAS_PRIM_NOTIFY_R0 = 18,
+ SAS_PRIM_NOTIFY_R1 = 19,
+ SAS_PRIM_NOTIFY_R2 = 20,
+
+ SAS_PRIM_CLOSE_CLAF = 21,
+ SAS_PRIM_CLOSE_NORM = 22,
+ SAS_PRIM_CLOSE_R0 = 23,
+ SAS_PRIM_CLOSE_R1 = 24,
+
+ SAS_PRIM_OPEN_RTRY = 25,
+ SAS_PRIM_OPEN_RJCT = 26,
+ SAS_PRIM_OPEN_ACPT = 27,
+
+ SAS_PRIM_DONE = 28,
+ SAS_PRIM_BREAK = 29,
+
+ SATA_PRIM_DMAT = 33,
+ SATA_PRIM_PMNAK = 34,
+ SATA_PRIM_PMACK = 35,
+ SATA_PRIM_PMREQ_S = 36,
+ SATA_PRIM_PMREQ_P = 37,
+ SATA_SATA_R_ERR = 38,
+};
+
+enum sas_open_rej_reason {
+ /* Abandon open */
+ SAS_OREJ_UNKNOWN = 0,
+ SAS_OREJ_BAD_DEST = 1,
+ SAS_OREJ_CONN_RATE = 2,
+ SAS_OREJ_EPROTO = 3,
+ SAS_OREJ_RESV_AB0 = 4,
+ SAS_OREJ_RESV_AB1 = 5,
+ SAS_OREJ_RESV_AB2 = 6,
+ SAS_OREJ_RESV_AB3 = 7,
+ SAS_OREJ_WRONG_DEST= 8,
+ SAS_OREJ_STP_NORES = 9,
+
+ /* Retry open */
+ SAS_OREJ_NO_DEST = 10,
+ SAS_OREJ_PATH_BLOCKED = 11,
+ SAS_OREJ_RSVD_CONT0 = 12,
+ SAS_OREJ_RSVD_CONT1 = 13,
+ SAS_OREJ_RSVD_INIT0 = 14,
+ SAS_OREJ_RSVD_INIT1 = 15,
+ SAS_OREJ_RSVD_STOP0 = 16,
+ SAS_OREJ_RSVD_STOP1 = 17,
+ SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct dev_to_host_fis {
+ u8 fis_type; /* 0x34 */
+ u8 flags;
+ u8 status;
+ u8 error;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 _r_c;
+
+ u32 _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+ u8 fis_type; /* 0x27 */
+ u8 flags;
+ u8 command;
+ u8 features;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 features_exp;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_a;
+ u8 control;
+
+ u32 _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 changing_data_ptr:1;
+ u8 retransmit:1;
+ u8 retry_data_frames:1;
+ u8 _r_c:5;
+
+ u8 num_fill_bytes:2;
+ u8 _r_d:6;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 datapres:2;
+ u8 _r_b:6;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 conf_route_table:1;
+ u8 configuring:1;
+ u8 _r_b:6;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_c:4;
+ u8 attached_dev_type:3;
+ u8 _r_d:1;
+
+ u8 linkrate:4;
+ u8 _r_e:4;
+
+ u8 attached_sata_host:1;
+ u8 iproto:3;
+ u8 _r_f:4;
+
+ u8 attached_sata_dev:1;
+ u8 tproto:3;
+ u8 _r_g:3;
+ u8 attached_sata_ps:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 hmin_linkrate:4;
+ u8 pmin_linkrate:4;
+ u8 hmax_linkrate:4;
+ u8 pmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 pptv:4;
+ u8 _r_i:3;
+ u8 virtual:1;
+
+ u8 routing_attr:4;
+ u8 _r_j:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 affil_valid:1;
+ u8 affil_supp:1;
+ u8 _r_c:6;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 _r_c:5;
+ u8 retry_data_frames:1;
+ u8 retransmit:1;
+ u8 changing_data_ptr:1;
+
+ u8 _r_d:6;
+ u8 num_fill_bytes:2;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 _r_b:6;
+ u8 datapres:2;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 _r_b:6;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_d:1;
+ u8 attached_dev_type:3;
+ u8 _r_c:4;
+
+ u8 _r_e:4;
+ u8 linkrate:4;
+
+ u8 _r_f:4;
+ u8 iproto:3;
+ u8 attached_sata_host:1;
+
+ u8 attached_sata_ps:1;
+ u8 _r_g:3;
+ u8 tproto:3;
+ u8 attached_sata_dev:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 pmin_linkrate:4;
+ u8 hmin_linkrate:4;
+ u8 pmax_linkrate:4;
+ u8 hmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 virtual:1;
+ u8 _r_i:3;
+ u8 pptv:4;
+
+ u8 _r_j:4;
+ u8 routing_attr:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 _r_c:6;
+ u8 affil_supp:1;
+ u8 affil_valid:1;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline u32 scsi_to_u32(u8 *ptr)
+{
+ return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
#endif /* _SCSI_SCSI_H */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff