aha1542: Use shost_printk instead of printk

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 6e44a7fb67ca29937d7d022e587b64de55bf73c3..d607f59f922a0681665a9f12f74f5550509b4184 100644 (file)
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -105,10 +105,8 @@ static int aha1542_outb(unsigned int base, u8 val)
        unsigned long flags;
 
        while (1) {
-               if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) {
-                       printk(KERN_ERR "aha1542_outb failed");
+               if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
                        return 1;
-               }
                spin_lock_irqsave(&aha1542_lock, flags);
                if (inb(STATUS(base)) & CDF) {
                        spin_unlock_irqrestore(&aha1542_lock, flags);
@@ -128,7 +126,6 @@ static int aha1542_out(unsigned int base, u8 *buf, int len)
        while (len--) {
                if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) {
                        spin_unlock_irqrestore(&aha1542_lock, flags);
-                       printk(KERN_ERR "aha1542_out failed(%d): ", len + 1);
                        return 1;
                }
                outb(*buf++, DATA(base));
@@ -151,8 +148,6 @@ static int aha1542_in(unsigned int base, u8 *buf, int len, int timeout)
        while (len--) {
                if (!wait_mask(STATUS(base), DF, DF, 0, timeout)) {
                        spin_unlock_irqrestore(&aha1542_lock, flags);
-                       if (timeout == 0)
-                               printk(KERN_ERR "aha1542_in failed(%d): ", len + 1);
                        return 1;
                }
                *buf++ = inb(DATA(base));
@@ -284,7 +279,7 @@ static void aha1542_intr_handle(struct Scsi_Host *sh)
 #ifdef DEBUG
        {
                flag = inb(INTRFLAGS(sh->io_port));
-               printk(KERN_DEBUG "aha1542_intr_handle: ");
+               shost_printk(KERN_DEBUG, sh, "aha1542_intr_handle: ");
                if (!(flag & ANYINTR))
                        printk("no interrupt?");
                if (flag & MBIF)
@@ -334,7 +329,7 @@ static void aha1542_intr_handle(struct Scsi_Host *sh)
                        spin_unlock_irqrestore(&aha1542_lock, flags);
                        /* Hmm, no mail.  Must have read it the last time around */
                        if (!number_serviced)
-                               printk(KERN_WARNING "aha1542.c: interrupt received, but no mail.\n");
+                               shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
                        return;
                };
 
@@ -347,7 +342,7 @@ static void aha1542_intr_handle(struct Scsi_Host *sh)
 #ifdef DEBUG
                {
                        if (ccb[mbo].tarstat | ccb[mbo].hastat)
-                               printk(KERN_DEBUG "aha1542_command: returning %x (status %d)\n",
+                               shost_printk(KERN_DEBUG, sh, "aha1542_command: returning %x (status %d)\n",
                                       ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status);
                };
 #endif
@@ -356,14 +351,14 @@ static void aha1542_intr_handle(struct Scsi_Host *sh)
                        continue;       /* Aborted command not found */
 
 #ifdef DEBUG
-               printk(KERN_DEBUG "...done %d %d\n", mbo, mbi);
+               shost_printk(KERN_DEBUG, sh, "...done %d %d\n", mbo, mbi);
 #endif
 
                tmp_cmd = aha1542->int_cmds[mbo];
 
                if (!tmp_cmd || !tmp_cmd->scsi_done) {
-                       printk(KERN_WARNING "aha1542_intr_handle: Unexpected interrupt\n");
-                       printk(KERN_WARNING "tarstat=%x, hastat=%x idlun=%x ccb#=%d \n", ccb[mbo].tarstat,
+                       shost_printk(KERN_WARNING, sh, "Unexpected interrupt\n");
+                       shost_printk(KERN_WARNING, sh, "tarstat=%x, hastat=%x idlun=%x ccb#=%d\n", ccb[mbo].tarstat,
                               ccb[mbo].hastat, ccb[mbo].idlun, mbo);
                        return;
                }
@@ -389,7 +384,7 @@ static void aha1542_intr_handle(struct Scsi_Host *sh)
 
 #ifdef DEBUG
                if (errstatus)
-                       printk(KERN_DEBUG "(aha1542 error:%x %x %x) ", errstatus,
+                       shost_printk(KERN_DEBUG, sh, "(aha1542 error:%x %x %x) ", errstatus,
                               ccb[mbo].hastat, ccb[mbo].tarstat);
 #endif
 
@@ -433,7 +428,8 @@ static irqreturn_t do_aha1542_intr_handle(int dummy, void *dev_id)
 
 static int aha1542_queuecommand_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *))
 {
-       struct aha1542_hostdata *aha1542 = shost_priv(cmd->device->host);
+       struct Scsi_Host *sh = cmd->device->host;
+       struct aha1542_hostdata *aha1542 = shost_priv(sh);
        u8 direction;
        u8 target = cmd->device->id;
        u8 lun = cmd->device->lun;
@@ -465,10 +461,10 @@ static int aha1542_queuecommand_lck(struct scsi_cmnd *cmd, void (*done) (struct
        else
                i = -1;
        if (done)
-               printk(KERN_DEBUG "aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd->cmnd, i, bufflen);
+               shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd->cmnd, i, bufflen);
        else
-               printk(KERN_DEBUG "aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd->cmnd, i, bufflen);
-       printk(KERN_DEBUG "aha1542_queuecommand: dumping scsi cmd:");
+               shost_printk(KERN_DEBUG, sh, "aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd->cmnd, i, bufflen);
+       shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dumping scsi cmd:");
        for (i = 0; i < cmd->cmd_len; i++)
                printk("%02x ", cmd->cmnd[i]);
        printk("\n");
@@ -501,7 +497,7 @@ static int aha1542_queuecommand_lck(struct scsi_cmnd *cmd, void (*done) (struct
        spin_unlock_irqrestore(&aha1542_lock, flags);
 
 #ifdef DEBUG
-       printk(KERN_DEBUG "Sending command (%d %x)...", mbo, done);
+       shost_printk(KERN_DEBUG, sh, "Sending command (%d %x)...", mbo, done);
 #endif
 
        any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo]));   /* This gets trashed for some reason */
@@ -561,7 +557,7 @@ static int aha1542_queuecommand_lck(struct scsi_cmnd *cmd, void (*done) (struct
 #ifdef DEBUG
        {
                int i;
-               printk(KERN_DEBUG "aha1542_command: sending.. ");
+               shost_printk(KERN_DEBUG, sh, "aha1542_command: sending.. ");
                for (i = 0; i < sizeof(ccb[mbo]) - 10; i++)
                        printk("%02x ", ((u8 *) &ccb[mbo])[i]);
        };
@@ -597,7 +593,7 @@ static void setup_mailboxes(struct Scsi_Host *sh)
        aha1542_intr_reset(sh->io_port);        /* reset interrupts, so they don't block */
        any2scsi((mb_cmd + 2), isa_virt_to_bus(mb));
        if (aha1542_out(sh->io_port, mb_cmd, 5))
-               printk(KERN_ERR "aha1542_detect: failed setting up mailboxes\n");
+               shost_printk(KERN_ERR, sh, "failed setting up mailboxes\n");
        aha1542_intr_reset(sh->io_port);
 }
 
@@ -612,7 +608,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
        aha1542_outb(sh->io_port, CMD_RETCONF);
        aha1542_in(sh->io_port, inquiry_result, 3, 0);
        if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
-               printk(KERN_ERR "aha1542_detect: query board settings\n");
+               shost_printk(KERN_ERR, sh, "error querying board settings\n");
        aha1542_intr_reset(sh->io_port);
        switch (inquiry_result[0]) {
        case 0x80:
@@ -633,7 +629,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
                sh->dma_channel = 0xFF;
                break;
        default:
-               printk(KERN_ERR "Unable to determine Adaptec DMA priority.  Disabling board\n");
+               shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
                return -1;
        };
        switch (inquiry_result[1]) {
@@ -656,7 +652,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
                sh->irq = 9;
                break;
        default:
-               printk(KERN_ERR "Unable to determine Adaptec IRQ level.  Disabling board\n");
+               shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
                return -1;
        };
        sh->this_id = inquiry_result[2] & 7;
@@ -694,7 +690,7 @@ static int aha1542_mbenable(struct Scsi_Host *sh)
        };
        while (0) {
 fail:
-               printk(KERN_ERR "aha1542_mbenable: Mailbox init failed\n");
+               shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
        }
        aha1542_intr_reset(sh->io_port);
        return retval;
@@ -713,7 +709,7 @@ static int aha1542_query(struct Scsi_Host *sh)
        aha1542_outb(sh->io_port, CMD_INQUIRY);
        aha1542_in(sh->io_port, inquiry_result, 4, 0);
        if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
-               printk(KERN_ERR "aha1542_detect: query card type\n");
+               shost_printk(KERN_ERR, sh, "error querying card type\n");
        aha1542_intr_reset(sh->io_port);
 
        aha1542->bios_translation = BIOS_TRANSLATION_6432;      /* Default case */
@@ -725,7 +721,7 @@ static int aha1542_query(struct Scsi_Host *sh)
         */
 
        if (inquiry_result[0] == 0x43) {
-               printk(KERN_INFO "aha1542.c: Emulation mode not supported for AHA 174N hardware.\n");
+               shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
                return 1;
        };
 
@@ -784,7 +780,7 @@ static void aha1542_set_bus_times(struct Scsi_Host *sh, int bus_on, int bus_off,
        aha1542_intr_reset(sh->io_port);
        return;
 fail:
-       printk(KERN_ERR "setting bus on/off-time failed\n");
+       shost_printk(KERN_ERR, sh, "setting bus on/off-time failed\n");
        aha1542_intr_reset(sh->io_port);
 }
 
@@ -794,6 +790,7 @@ static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct
        unsigned int base_io = io[indx];
        struct Scsi_Host *sh;
        struct aha1542_hostdata *aha1542;
+       char dma_info[] = "no DMA";
 
        if (base_io == 0)
                return NULL;
@@ -821,23 +818,23 @@ static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct
        if (aha1542_getconfig(sh) == -1)
                goto unregister;
 
-       printk(KERN_INFO "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d", sh->this_id, base_io, sh->irq);
        if (sh->dma_channel != 0xFF)
-               printk(", DMA %d", sh->dma_channel);
-       printk("\n");
+               snprintf(dma_info, sizeof(dma_info), "DMA %d", sh->dma_channel);
+       shost_printk(KERN_INFO, sh, "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d, %s\n",
+                               sh->this_id, base_io, sh->irq, dma_info);
        if (aha1542->bios_translation == BIOS_TRANSLATION_25563)
-               printk(KERN_INFO "aha1542.c: Using extended bios translation\n");
+               shost_printk(KERN_INFO, sh, "Using extended bios translation\n");
 
        setup_mailboxes(sh);
 
        if (request_irq(sh->irq, do_aha1542_intr_handle, 0,
                                        "aha1542", sh)) {
-               printk(KERN_ERR "Unable to allocate IRQ for adaptec controller.\n");
+               shost_printk(KERN_ERR, sh, "Unable to allocate IRQ.\n");
                goto unregister;
        }
        if (sh->dma_channel != 0xFF) {
                if (request_dma(sh->dma_channel, "aha1542")) {
-                       printk(KERN_ERR "Unable to allocate DMA channel for Adaptec.\n");
+                       shost_printk(KERN_ERR, sh, "Unable to allocate DMA channel.\n");
                        goto free_irq;
                }
                if (sh->dma_channel == 0 || sh->dma_channel >= 5) {
@@ -979,7 +976,7 @@ static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
         * out.  We do not try and restart any commands or anything - 
         * the strategy handler takes care of that crap.
         */
-       printk(KERN_WARNING "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
+       shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
 
        for (i = 0; i < AHA1542_MAILBOXES; i++) {
                if (aha1542->int_cmds[i] != NULL) {
@@ -1105,7 +1102,7 @@ static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *i
                /* The card can be queried for its DMA, we have
                   the DMA set up that is enough */
 
-               printk(KERN_INFO "ISAPnP found an AHA1535 at I/O 0x%03X\n", io[indx]);
+               dev_info(&pdev->dev, "ISAPnP found an AHA1535 at I/O 0x%03X", io[indx]);
        }
 
        sh = aha1542_hw_init(&driver_template, &pdev->dev, indx);