SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
};
+/* (temp & vin) channel status register alarm bits (pdf sec.11.5.12) */
+#define CHAN_ALM_MIN 0x02 /* min limit crossed */
+#define CHAN_ALM_MAX 0x04 /* max limit exceeded */
+#define TEMP_ALM_CRIT 0x08 /* temp crit exceeded (temp only) */
+
#define VIN_UNIT_ATTRS(X) \
&in_input[X].dev_attr.attr, \
&in_status[X].dev_attr.attr, \
mutex_unlock(&(data->lock));
}
+/* (temp & vin) channel conversion status register flags (pdf sec.11.5.12) */
+#define CHAN_CNVRTD 0x80 /* new data ready */
+#define CHAN_ENA 0x01 /* enabled channel (temp or vin) */
+#define CHAN_ALM_ENA 0x10 /* propagate to alarms-reg ?? (chk val!) */
+#define CHAN_READY (CHAN_ENA|CHAN_CNVRTD) /* sample ready mask */
+
static void pc87360_init_device(struct platform_device *pdev,
int use_thermistors)
{
/* Forcibly enable voltage channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling in%d\n", i);
pc87360_write_value(data, LD_IN, i,
for (i = 11; i < data->innr; i++) {
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS);
- use_thermistors = use_thermistors || (reg & 0x01);
+ use_thermistors = use_thermistors || (reg & CHAN_ENA);
}
i = use_thermistors ? 2 : 0;
/* Forcibly enable temperature channel */
reg = pc87360_read_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i+1);
pc87360_write_value(data, LD_TEMP, i,
diodes */
reg = pc87360_read_value(data, LD_TEMP,
(i-11)/2, PC87365_REG_TEMP_STATUS);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Skipping "
"temp%d, pin already in use "
"by temp%d\n", i-7, (i-11)/2);
/* Forcibly enable thermistor channel */
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_IN_STATUS);
- if (!(reg & 0x01)) {
+ if (!(reg & CHAN_ENA)) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling temp%d\n", i-7);
pc87360_write_value(data, LD_IN, i,
if (data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONFIG);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Forcibly "
"enabling monitoring (VLM)\n");
pc87360_write_value(data, LD_IN, NO_BANK,
if (data->tempnr) {
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
PC87365_REG_TEMP_CONFIG);
- if (reg & 0x01) {
+ if (reg & CHAN_ENA) {
dev_dbg(&pdev->dev, "Forcibly enabling "
"monitoring (TMS)\n");
pc87360_write_value(data, LD_TEMP, NO_BANK,
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
data->in_status[i]);
- if ((data->in_status[i] & 0x81) == 0x81) {
+ if ((data->in_status[i] & CHAN_READY) == CHAN_READY) {
data->in[i] = pc87360_read_value(data, LD_IN,
i, PC87365_REG_IN);
}
- if (data->in_status[i] & 0x01) {
+ if (data->in_status[i] & CHAN_ENA) {
data->in_min[i] = pc87360_read_value(data,
LD_IN, i,
PC87365_REG_IN_MIN);
pc87360_write_value(data, LD_TEMP, i,
PC87365_REG_TEMP_STATUS,
data->temp_status[i]);
- if ((data->temp_status[i] & 0x81) == 0x81) {
+ if ((data->temp_status[i] & CHAN_READY) == CHAN_READY) {
data->temp[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP);
}
- if (data->temp_status[i] & 0x01) {
+ if (data->temp_status[i] & CHAN_ENA) {
data->temp_min[i] = pc87360_read_value(data,
LD_TEMP, i,
PC87365_REG_TEMP_MIN);