serial8250: Use dl_read()/dl_write() on RM9K
authorMagnus Damm <damm@opensource.se>
Wed, 2 May 2012 12:47:09 +0000 (21:47 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 2 May 2012 21:07:28 +0000 (14:07 -0700)
Convert the 8250 RM9K support code to make
use of the new dl_read()/dl_write() callbacks.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/8250/8250.c

index 2d62c89195e9a4740611122137822855c61b7832..cc398b1bcebf0e617a2b07746ee660dc5677ab1b 100644 (file)
@@ -297,25 +297,6 @@ static void default_dl_write(struct uart_8250_port *up, int value)
        serial_out(up, UART_DLM, value >> 8 & 0xff);
 }
 
-#if defined(CONFIG_SERIAL_8250_RM9K)
-static int _serial_dl_read(struct uart_8250_port *up)
-{
-       return  (up->port.iotype == UPIO_RM9000) ?
-               (((__raw_readl(up->port.membase + 0x10) << 8) |
-               (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
-               default_dl_read(up);
-}
-
-static void _serial_dl_write(struct uart_8250_port *up, int value)
-{
-       if (up->port.iotype == UPIO_RM9000) {
-               __raw_writel(value, up->port.membase + 0x08);
-               __raw_writel(value >> 8, up->port.membase + 0x10);
-       } else {
-               default_dl_write(up, value);
-       }
-}
-#else
 static int _serial_dl_read(struct uart_8250_port *up)
 {
        return default_dl_read(up);
@@ -325,7 +306,6 @@ static void _serial_dl_write(struct uart_8250_port *up, int value)
 {
        default_dl_write(up, value);
 }
-#endif
 
 #ifdef CONFIG_MIPS_ALCHEMY
 
@@ -373,7 +353,7 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value)
 
 #endif
 
-#if defined(CONFIG_SERIAL_8250_RM9K)
+#ifdef CONFIG_SERIAL_8250_RM9K
 
 static const u8
        regmap_in[8] = {
@@ -397,28 +377,36 @@ static const u8
                [UART_SCR]      = 0x2c
        };
 
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
+static unsigned int rm9k_serial_in(struct uart_port *p, int offset)
 {
-       if (p->iotype != UPIO_RM9000)
-               return offset;
-       return regmap_in[offset];
+       offset = regmap_in[offset] << p->regshift;
+       return readl(p->membase + offset);
 }
 
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
+static void rm9k_serial_out(struct uart_port *p, int offset, int value)
 {
-       if (p->iotype != UPIO_RM9000)
-               return offset;
-       return regmap_out[offset];
+       offset = regmap_out[offset] << p->regshift;
+       writel(value, p->membase + offset);
 }
 
-#else
+static int rm9k_serial_dl_read(struct uart_8250_port *up)
+{
+       return ((__raw_readl(up->port.membase + 0x10) << 8) |
+               (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff;
+}
+
+static void rm9k_serial_dl_write(struct uart_8250_port *up, int value)
+{
+       __raw_writel(value, up->port.membase + 0x08);
+       __raw_writel(value >> 8, up->port.membase + 0x10);
+}
+
+#endif
 
 /* sane hardware needs no mapping */
 #define map_8250_in_reg(up, offset) (offset)
 #define map_8250_out_reg(up, offset) (offset)
 
-#endif
-
 static unsigned int hub6_serial_in(struct uart_port *p, int offset)
 {
        offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -490,12 +478,20 @@ static void set_io_from_upio(struct uart_port *p)
                p->serial_out = mem_serial_out;
                break;
 
-       case UPIO_RM9000:
        case UPIO_MEM32:
                p->serial_in = mem32_serial_in;
                p->serial_out = mem32_serial_out;
                break;
 
+#ifdef CONFIG_SERIAL_8250_RM9K
+       case UPIO_RM9000:
+               p->serial_in = rm9k_serial_in;
+               p->serial_out = rm9k_serial_out;
+               up->dl_read = rm9k_serial_dl_read;
+               up->dl_write = rm9k_serial_dl_write;
+               break;
+#endif
+
 #ifdef CONFIG_MIPS_ALCHEMY
        case UPIO_AU:
                p->serial_in = au_serial_in;