drivers/net: Add Micrel KS8841/42 support to ks8842 driver

Body of the explanation:
   -support 16bit and 32bit bus width.
   -add device reset for ks8842/8841 Micrel device.
   -set 100Mbps as a default for Micrel device.
   -set MAC address in both MAC/Switch layer with different sequence for Micrel
    device, as mentioned in data sheet.
   -use private data to set options both 16/32bit bus width and Micrel device/
    Timberdale(FPGA).
   -update Kconfig in order to put more information about ks8842 device.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f65857e88ec12e38bb4ffed73d47cf649a3c7b23..88294762f9e6c1e5eecece68467812dcb657e841 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1750,11 +1750,12 @@ config TLAN
          Please email feedback to <torben.mathiasen@compaq.com>.
 
 config KS8842
-       tristate "Micrel KSZ8842"
+       tristate "Micrel KSZ8841/42 with generic bus interface"
        depends on HAS_IOMEM
        help
-         This platform driver is for Micrel KSZ8842 / KS8842
-         2-port ethernet switch chip (managed, VLAN, QoS).
+        This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+        ethernet switch chip (managed, VLAN, QoS) from Micrel or
+        Timberdale(FPGA).
 
 config KS8851
        tristate "Micrel KS8851 SPI"

diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 0be92613acf0550582ed058c3d8a19ad17debc2e..ee69dea69be82868301932ca4e0ed267f378f703 100644 (file)
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -18,6 +18,7 @@
 
 /* Supports:
  * The Micrel KS8842 behind the timberdale FPGA
+ * The genuine Micrel KS8841/42 device with ISA 16/32bit bus interface
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -114,9 +115,14 @@
 #define REG_P1CR4              0x02
 #define REG_P1SR               0x04
 
+/* flags passed by platform_device for configuration */
+#define        MICREL_KS884X           0x01    /* 0=Timeberdale(FPGA), 1=Micrel */
+#define        KS884X_16BIT            0x02    /*  1=16bit, 0=32bit */
+
 struct ks8842_adapter {
        void __iomem    *hw_addr;
        int             irq;
+       unsigned long   conf_flags;     /* copy of platform_device config */
        struct tasklet_struct   tasklet;
        spinlock_t      lock; /* spinlock to be interrupt safe */
        struct work_struct timeout_work;
@@ -192,15 +198,21 @@ static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
 
 static void ks8842_reset(struct ks8842_adapter *adapter)
 {
-       /* The KS8842 goes haywire when doing softare reset
-        * a work around in the timberdale IP is implemented to
-        * do a hardware reset instead
-       ks8842_write16(adapter, 3, 1, REG_GRR);
-       msleep(10);
-       iowrite16(0, adapter->hw_addr + REG_GRR);
-       */
-       iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
-       msleep(20);
+       if (adapter->conf_flags & MICREL_KS884X) {
+               ks8842_write16(adapter, 3, 1, REG_GRR);
+               msleep(10);
+               iowrite16(0, adapter->hw_addr + REG_GRR);
+       } else {
+               /* The KS8842 goes haywire when doing softare reset
+               * a work around in the timberdale IP is implemented to
+               * do a hardware reset instead
+               ks8842_write16(adapter, 3, 1, REG_GRR);
+               msleep(10);
+               iowrite16(0, adapter->hw_addr + REG_GRR);
+               */
+               iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
+               msleep(20);
+       }
 }
 
 static void ks8842_update_link_status(struct net_device *netdev,
@@ -269,8 +281,10 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
 
        /* restart port auto-negotiation */
        ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
-       /* only advertise 10Mbps */
-       ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
+
+       if (!(adapter->conf_flags & MICREL_KS884X))
+               /* only advertise 10Mbps */
+               ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4);
 
        /* Enable the transmitter */
        ks8842_enable_tx(adapter);
@@ -296,13 +310,28 @@ static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
        for (i = 0; i < ETH_ALEN; i++)
                dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
 
-       /* make sure the switch port uses the same MAC as the QMU */
-       mac = ks8842_read16(adapter, 2, REG_MARL);
-       ks8842_write16(adapter, 39, mac, REG_MACAR1);
-       mac = ks8842_read16(adapter, 2, REG_MARM);
-       ks8842_write16(adapter, 39, mac, REG_MACAR2);
-       mac = ks8842_read16(adapter, 2, REG_MARH);
-       ks8842_write16(adapter, 39, mac, REG_MACAR3);
+       if (adapter->conf_flags & MICREL_KS884X) {
+               /*
+               the sequence of saving mac addr between MAC and Switch is
+               different.
+               */
+
+               mac = ks8842_read16(adapter, 2, REG_MARL);
+               ks8842_write16(adapter, 39, mac, REG_MACAR3);
+               mac = ks8842_read16(adapter, 2, REG_MARM);
+               ks8842_write16(adapter, 39, mac, REG_MACAR2);
+               mac = ks8842_read16(adapter, 2, REG_MARH);
+               ks8842_write16(adapter, 39, mac, REG_MACAR1);
+       } else {
+
+               /* make sure the switch port uses the same MAC as the QMU */
+               mac = ks8842_read16(adapter, 2, REG_MARL);
+               ks8842_write16(adapter, 39, mac, REG_MACAR1);
+               mac = ks8842_read16(adapter, 2, REG_MARM);
+               ks8842_write16(adapter, 39, mac, REG_MACAR2);
+               mac = ks8842_read16(adapter, 2, REG_MARH);
+               ks8842_write16(adapter, 39, mac, REG_MACAR3);
+       }
 }
 
 static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
@@ -313,8 +342,25 @@ static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
        spin_lock_irqsave(&adapter->lock, flags);
        for (i = 0; i < ETH_ALEN; i++) {
                ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
-               ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
-                       REG_MACAR1 + i);
+               if (!(adapter->conf_flags & MICREL_KS884X))
+                       ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
+                               REG_MACAR1 + i);
+       }
+
+       if (adapter->conf_flags & MICREL_KS884X) {
+               /*
+               the sequence of saving mac addr between MAC and Switch is
+               different.
+               */
+
+               u16 mac;
+
+               mac = ks8842_read16(adapter, 2, REG_MARL);
+               ks8842_write16(adapter, 39, mac, REG_MACAR3);
+               mac = ks8842_read16(adapter, 2, REG_MARM);
+               ks8842_write16(adapter, 39, mac, REG_MACAR2);
+               mac = ks8842_read16(adapter, 2, REG_MARH);
+               ks8842_write16(adapter, 39, mac, REG_MACAR1);
        }
        spin_unlock_irqrestore(&adapter->lock, flags);
 }
@@ -328,8 +374,6 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
 {
        struct ks8842_adapter *adapter = netdev_priv(netdev);
        int len = skb->len;
-       u32 *ptr = (u32 *)skb->data;
-       u32 ctrl;
 
        netdev_dbg(netdev, "%s: len %u head %p data %p tail %p end %p\n",
                __func__, skb->len, skb->head, skb->data,
@@ -339,17 +383,34 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
        if (ks8842_tx_fifo_space(adapter) < len + 8)
                return NETDEV_TX_BUSY;
 
-       /* the control word, enable IRQ, port 1 and the length */
-       ctrl = 0x8000 | 0x100 | (len << 16);
-       ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
+       if (adapter->conf_flags & KS884X_16BIT) {
+               u16 *ptr16 = (u16 *)skb->data;
+               ks8842_write16(adapter, 17, 0x8000 | 0x100, REG_QMU_DATA_LO);
+               ks8842_write16(adapter, 17, (u16)len, REG_QMU_DATA_HI);
+               netdev->stats.tx_bytes += len;
+
+               /* copy buffer */
+               while (len > 0) {
+                       iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_LO);
+                       iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_HI);
+                       len -= sizeof(u32);
+               }
+       } else {
+
+               u32 *ptr = (u32 *)skb->data;
+               u32 ctrl;
+               /* the control word, enable IRQ, port 1 and the length */
+               ctrl = 0x8000 | 0x100 | (len << 16);
+               ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
 
-       netdev->stats.tx_bytes += len;
+               netdev->stats.tx_bytes += len;
 
-       /* copy buffer */
-       while (len > 0) {
-               iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
-               len -= sizeof(u32);
-               ptr++;
+               /* copy buffer */
+               while (len > 0) {
+                       iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
+                       len -= sizeof(u32);
+                       ptr++;
+               }
        }
 
        /* enqueue packet */
@@ -363,12 +424,23 @@ static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
 static void ks8842_rx_frame(struct net_device *netdev,
        struct ks8842_adapter *adapter)
 {
-       u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
-       int len = (status >> 16) & 0x7ff;
+       u16 status16;
+       u32 status;
+       int len;
 
-       status &= 0xffff;
-
-       netdev_dbg(netdev, "%s - rx_data: status: %x\n", __func__, status);
+       if (adapter->conf_flags & KS884X_16BIT) {
+               status16 = ks8842_read16(adapter, 17, REG_QMU_DATA_LO);
+               len  = (int)ks8842_read16(adapter, 17, REG_QMU_DATA_HI);
+               len &= 0xffff;
+               netdev_dbg(netdev, "%s - rx_data: status: %x\n",
+                          __func__, status16);
+       } else {
+               status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
+               len = (status >> 16) & 0x7ff;
+               status &= 0xffff;
+               netdev_dbg(netdev, "%s - rx_data: status: %x\n",
+                          __func__, status);
+       }
 
        /* check the status */
        if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
@@ -376,22 +448,32 @@ static void ks8842_rx_frame(struct net_device *netdev,
 
                netdev_dbg(netdev, "%s, got package, len: %d\n", __func__, len);
                if (skb) {
-                       u32 *data;
 
                        netdev->stats.rx_packets++;
                        netdev->stats.rx_bytes += len;
                        if (status & RXSR_MULTICAST)
                                netdev->stats.multicast++;
 
-                       data = (u32 *)skb_put(skb, len);
-
-                       ks8842_select_bank(adapter, 17);
-                       while (len > 0) {
-                               *data++ = ioread32(adapter->hw_addr +
-                                       REG_QMU_DATA_LO);
-                               len -= sizeof(u32);
+                       if (adapter->conf_flags & KS884X_16BIT) {
+                               u16 *data16 = (u16 *)skb_put(skb, len);
+                               ks8842_select_bank(adapter, 17);
+                               while (len > 0) {
+                                       *data16++ = ioread16(adapter->hw_addr +
+                                               REG_QMU_DATA_LO);
+                                       *data16++ = ioread16(adapter->hw_addr +
+                                               REG_QMU_DATA_HI);
+                                       len -= sizeof(u32);
+                               }
+                       } else {
+                               u32 *data = (u32 *)skb_put(skb, len);
+
+                               ks8842_select_bank(adapter, 17);
+                               while (len > 0) {
+                                       *data++ = ioread32(adapter->hw_addr +
+                                               REG_QMU_DATA_LO);
+                                       len -= sizeof(u32);
+                               }
                        }
-
                        skb->protocol = eth_type_trans(skb, netdev);
                        netif_rx(skb);
                } else
@@ -669,6 +751,8 @@ static int __devinit ks8842_probe(struct platform_device *pdev)
        adapter->netdev = netdev;
        INIT_WORK(&adapter->timeout_work, ks8842_tx_timeout_work);
        adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
+       adapter->conf_flags = iomem->flags;
+
        if (!adapter->hw_addr)
                goto err_ioremap;