F: Documentation/video4linux/zr364xx.txt
F: drivers/media/usb/zr364xx/
+ULPI BUS
+M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/usb/common/ulpi.c
+F: include/linux/ulpi/
+
USER-MODE LINUX (UML)
M: Jeff Dike <jdike@addtoit.com>
M: Richard Weinberger <richard@nod.at>
usb-common-$(CONFIG_USB_LED_TRIG) += led.o
obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
+obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o
--- /dev/null
+/**
+ * ulpi.c - USB ULPI PHY bus
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ulpi/interface.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+/* -------------------------------------------------------------------------- */
+
+int ulpi_read(struct ulpi *ulpi, u8 addr)
+{
+ return ulpi->ops->read(ulpi->ops, addr);
+}
+EXPORT_SYMBOL_GPL(ulpi_read);
+
+int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val)
+{
+ return ulpi->ops->write(ulpi->ops, addr, val);
+}
+EXPORT_SYMBOL_GPL(ulpi_write);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_match(struct device *dev, struct device_driver *driver)
+{
+ struct ulpi_driver *drv = to_ulpi_driver(driver);
+ struct ulpi *ulpi = to_ulpi_dev(dev);
+ const struct ulpi_device_id *id;
+
+ for (id = drv->id_table; id->vendor; id++)
+ if (id->vendor == ulpi->id.vendor &&
+ id->product == ulpi->id.product)
+ return 1;
+
+ return 0;
+}
+
+static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct ulpi *ulpi = to_ulpi_dev(dev);
+
+ if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x",
+ ulpi->id.vendor, ulpi->id.product))
+ return -ENOMEM;
+ return 0;
+}
+
+static int ulpi_probe(struct device *dev)
+{
+ struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+
+ return drv->probe(to_ulpi_dev(dev));
+}
+
+static int ulpi_remove(struct device *dev)
+{
+ struct ulpi_driver *drv = to_ulpi_driver(dev->driver);
+
+ if (drv->remove)
+ drv->remove(to_ulpi_dev(dev));
+
+ return 0;
+}
+
+static struct bus_type ulpi_bus = {
+ .name = "ulpi",
+ .match = ulpi_match,
+ .uevent = ulpi_uevent,
+ .probe = ulpi_probe,
+ .remove = ulpi_remove,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ulpi *ulpi = to_ulpi_dev(dev);
+
+ return sprintf(buf, "ulpi:v%04xp%04x\n",
+ ulpi->id.vendor, ulpi->id.product);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ulpi_dev_attrs[] = {
+ &dev_attr_modalias.attr,
+ NULL
+};
+
+static struct attribute_group ulpi_dev_attr_group = {
+ .attrs = ulpi_dev_attrs,
+};
+
+static const struct attribute_group *ulpi_dev_attr_groups[] = {
+ &ulpi_dev_attr_group,
+ NULL
+};
+
+static void ulpi_dev_release(struct device *dev)
+{
+ kfree(to_ulpi_dev(dev));
+}
+
+static struct device_type ulpi_dev_type = {
+ .name = "ulpi_device",
+ .groups = ulpi_dev_attr_groups,
+ .release = ulpi_dev_release,
+};
+
+/* -------------------------------------------------------------------------- */
+
+/**
+ * ulpi_register_driver - register a driver with the ULPI bus
+ * @drv: driver being registered
+ *
+ * Registers a driver with the ULPI bus.
+ */
+int ulpi_register_driver(struct ulpi_driver *drv)
+{
+ if (!drv->probe)
+ return -EINVAL;
+
+ drv->driver.bus = &ulpi_bus;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(ulpi_register_driver);
+
+/**
+ * ulpi_unregister_driver - unregister a driver with the ULPI bus
+ * @drv: driver to unregister
+ *
+ * Unregisters a driver with the ULPI bus.
+ */
+void ulpi_unregister_driver(struct ulpi_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_driver);
+
+/* -------------------------------------------------------------------------- */
+
+static int ulpi_register(struct device *dev, struct ulpi *ulpi)
+{
+ int ret;
+
+ /* Test the interface */
+ ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa);
+ if (ret < 0)
+ return ret;
+
+ ret = ulpi_read(ulpi, ULPI_SCRATCH);
+ if (ret < 0)
+ return ret;
+
+ if (ret != 0xaa)
+ return -ENODEV;
+
+ ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW);
+ ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8;
+
+ ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
+ ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
+
+ ulpi->dev.parent = dev;
+ ulpi->dev.bus = &ulpi_bus;
+ ulpi->dev.type = &ulpi_dev_type;
+ dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
+
+ ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev));
+
+ request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
+
+ ret = device_register(&ulpi->dev);
+ if (ret)
+ return ret;
+
+ dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n",
+ ulpi->id.vendor, ulpi->id.product);
+
+ return 0;
+}
+
+/**
+ * ulpi_register_interface - instantiate new ULPI device
+ * @dev: USB controller's device interface
+ * @ops: ULPI register access
+ *
+ * Allocates and registers a ULPI device and an interface for it. Called from
+ * the USB controller that provides the ULPI interface.
+ */
+struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops)
+{
+ struct ulpi *ulpi;
+ int ret;
+
+ ulpi = kzalloc(sizeof(*ulpi), GFP_KERNEL);
+ if (!ulpi)
+ return ERR_PTR(-ENOMEM);
+
+ ulpi->ops = ops;
+ ops->dev = dev;
+
+ ret = ulpi_register(dev, ulpi);
+ if (ret) {
+ kfree(ulpi);
+ return ERR_PTR(ret);
+ }
+
+ return ulpi;
+}
+EXPORT_SYMBOL_GPL(ulpi_register_interface);
+
+/**
+ * ulpi_unregister_interface - unregister ULPI interface
+ * @intrf: struct ulpi_interface
+ *
+ * Unregisters a ULPI device and it's interface that was created with
+ * ulpi_create_interface().
+ */
+void ulpi_unregister_interface(struct ulpi *ulpi)
+{
+ device_unregister(&ulpi->dev);
+}
+EXPORT_SYMBOL_GPL(ulpi_unregister_interface);
+
+/* -------------------------------------------------------------------------- */
+
+static int __init ulpi_init(void)
+{
+ return bus_register(&ulpi_bus);
+}
+module_init(ulpi_init);
+
+static void __exit ulpi_exit(void)
+{
+ bus_unregister(&ulpi_bus);
+}
+module_exit(ulpi_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB ULPI PHY bus");
Implements OTG Finite State Machine as specified in On-The-Go
and Embedded Host Supplement to the USB Revision 2.0 Specification.
+config USB_ULPI_BUS
+ tristate "USB ULPI PHY interface support"
+ depends on USB_SUPPORT
+ help
+ UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+ USB 2.0 PHY interface. The ULPI specification defines a standard set
+ of registers that can be used to detect the vendor and product which
+ allows ULPI to be handled as a bus. This module is the driver for that
+ bus.
+
+ The ULPI interfaces (the buses) are registered by the drivers for USB
+ controllers which support ULPI register access and have ULPI PHY
+ attached to them. The ULPI PHY drivers themselves are normal PHY
+ drivers.
+
+ ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+ protocol) and USB charger detection.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ulpi.
kernel_ulong_t driver_data;
};
+struct ulpi_device_id {
+ __u16 vendor;
+ __u16 product;
+ kernel_ulong_t driver_data;
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
--- /dev/null
+#ifndef __LINUX_ULPI_DRIVER_H
+#define __LINUX_ULPI_DRIVER_H
+
+#include <linux/mod_devicetable.h>
+
+#include <linux/device.h>
+
+struct ulpi_ops;
+
+/**
+ * struct ulpi - describes ULPI PHY device
+ * @id: vendor and product ids for ULPI device
+ * @ops: I/O access
+ * @dev: device interface
+ */
+struct ulpi {
+ struct ulpi_device_id id;
+ struct ulpi_ops *ops;
+ struct device dev;
+};
+
+#define to_ulpi_dev(d) container_of(d, struct ulpi, dev)
+
+static inline void ulpi_set_drvdata(struct ulpi *ulpi, void *data)
+{
+ dev_set_drvdata(&ulpi->dev, data);
+}
+
+static inline void *ulpi_get_drvdata(struct ulpi *ulpi)
+{
+ return dev_get_drvdata(&ulpi->dev);
+}
+
+/**
+ * struct ulpi_driver - describes a ULPI PHY driver
+ * @id_table: array of device identifiers supported by this driver
+ * @probe: binds this driver to ULPI device
+ * @remove: unbinds this driver from ULPI device
+ * @driver: the name and owner members must be initialized by the drivers
+ */
+struct ulpi_driver {
+ const struct ulpi_device_id *id_table;
+ int (*probe)(struct ulpi *ulpi);
+ void (*remove)(struct ulpi *ulpi);
+ struct device_driver driver;
+};
+
+#define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver)
+
+int ulpi_register_driver(struct ulpi_driver *drv);
+void ulpi_unregister_driver(struct ulpi_driver *drv);
+
+#define module_ulpi_driver(__ulpi_driver) \
+ module_driver(__ulpi_driver, ulpi_register_driver, \
+ ulpi_unregister_driver)
+
+int ulpi_read(struct ulpi *ulpi, u8 addr);
+int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val);
+
+#endif /* __LINUX_ULPI_DRIVER_H */
--- /dev/null
+#ifndef __LINUX_ULPI_INTERFACE_H
+#define __LINUX_ULPI_INTERFACE_H
+
+#include <linux/types.h>
+
+struct ulpi;
+
+/**
+ * struct ulpi_ops - ULPI register access
+ * @dev: the interface provider
+ * @read: read operation for ULPI register access
+ * @write: write operation for ULPI register access
+ */
+struct ulpi_ops {
+ struct device *dev;
+ int (*read)(struct ulpi_ops *ops, u8 addr);
+ int (*write)(struct ulpi_ops *ops, u8 addr, u8 val);
+};
+
+struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *);
+void ulpi_unregister_interface(struct ulpi *);
+
+#endif /* __LINUX_ULPI_INTERFACE_H */
--- /dev/null
+#ifndef __LINUX_ULPI_REGS_H
+#define __LINUX_ULPI_REGS_H
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a) (a + 1)
+#define ULPI_CLR(a) (a + 2)
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW 0x00
+#define ULPI_VENDOR_ID_HIGH 0x01
+#define ULPI_PRODUCT_ID_LOW 0x02
+#define ULPI_PRODUCT_ID_HIGH 0x03
+#define ULPI_FUNC_CTRL 0x04
+#define ULPI_IFC_CTRL 0x07
+#define ULPI_OTG_CTRL 0x0a
+#define ULPI_USB_INT_EN_RISE 0x0d
+#define ULPI_USB_INT_EN_FALL 0x10
+#define ULPI_USB_INT_STS 0x13
+#define ULPI_USB_INT_LATCH 0x14
+#define ULPI_DEBUG 0x15
+#define ULPI_SCRATCH 0x16
+/* Optional Carkit Registers */
+#define ULPI_CARKIT_CTRL 0x19
+#define ULPI_CARKIT_INT_DELAY 0x1c
+#define ULPI_CARKIT_INT_EN 0x1d
+#define ULPI_CARKIT_INT_STS 0x20
+#define ULPI_CARKIT_INT_LATCH 0x21
+#define ULPI_CARKIT_PLS_CTRL 0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH 0x25
+#define ULPI_TX_NEG_WIDTH 0x26
+#define ULPI_POLARITY_RECOVERY 0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED 0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC 0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC 0x80
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL BIT(0)
+#define ULPI_FUNC_CTRL_XCVRSEL_MASK 0x3
+#define ULPI_FUNC_CTRL_HIGH_SPEED 0x0
+#define ULPI_FUNC_CTRL_FULL_SPEED 0x1
+#define ULPI_FUNC_CTRL_LOW_SPEED 0x2
+#define ULPI_FUNC_CTRL_FS4LS 0x3
+#define ULPI_FUNC_CTRL_TERMSELECT BIT(2)
+#define ULPI_FUNC_CTRL_OPMODE BIT(3)
+#define ULPI_FUNC_CTRL_OPMODE_MASK (0x3 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0x0 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (0x1 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (0x2 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (0x3 << 3)
+#define ULPI_FUNC_CTRL_RESET BIT(5)
+#define ULPI_FUNC_CTRL_SUSPENDM BIT(6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE BIT(0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE BIT(1)
+#define ULPI_IFC_CTRL_CARKITMODE BIT(2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM BIT(3)
+#define ULPI_IFC_CTRL_AUTORESUME BIT(4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS BIT(5)
+#define ULPI_IFC_CTRL_PASSTHRU BIT(6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE BIT(7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP BIT(0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN BIT(1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN BIT(2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS BIT(3)
+#define ULPI_OTG_CTRL_CHRGVBUS BIT(4)
+#define ULPI_OTG_CTRL_DRVVBUS BIT(5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT BIT(6)
+#define ULPI_OTG_CTRL_EXTVBUSIND BIT(7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT BIT(0)
+#define ULPI_INT_VBUS_VALID BIT(1)
+#define ULPI_INT_SESS_VALID BIT(2)
+#define ULPI_INT_SESS_END BIT(3)
+#define ULPI_INT_IDGRD BIT(4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0 BIT(0)
+#define ULPI_DEBUG_LINESTATE1 BIT(1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR BIT(0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV BIT(1)
+#define ULPI_CARKIT_CTRL_TXDEN BIT(2)
+#define ULPI_CARKIT_CTRL_RXDEN BIT(3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN BIT(4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN BIT(5)
+#define ULPI_CARKIT_CTRL_MICEN BIT(6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE BIT(0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL BIT(1)
+#define ULPI_CARKIT_INT_EN_CARINTDET BIT(2)
+#define ULPI_CARKIT_INT_EN_DP_RISE BIT(3)
+#define ULPI_CARKIT_INT_EN_DP_FALL BIT(4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT BIT(0)
+#define ULPI_CARKIT_INT_CARINTDET BIT(1)
+#define ULPI_CARKIT_INT_DP BIT(2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN BIT(0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN BIT(1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN BIT(2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN BIT(3)
+
+#endif /* __LINUX_ULPI_REGS_H */
#define __LINUX_USB_ULPI_H
#include <linux/usb/otg.h>
+#include <linux/ulpi/regs.h>
+
/*-------------------------------------------------------------------------*/
/*
/*-------------------------------------------------------------------------*/
-/*
- * Macros for Set and Clear
- * See ULPI 1.1 specification to find the registers with Set and Clear offsets
- */
-#define ULPI_SET(a) (a + 1)
-#define ULPI_CLR(a) (a + 2)
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Map
- */
-#define ULPI_VENDOR_ID_LOW 0x00
-#define ULPI_VENDOR_ID_HIGH 0x01
-#define ULPI_PRODUCT_ID_LOW 0x02
-#define ULPI_PRODUCT_ID_HIGH 0x03
-#define ULPI_FUNC_CTRL 0x04
-#define ULPI_IFC_CTRL 0x07
-#define ULPI_OTG_CTRL 0x0a
-#define ULPI_USB_INT_EN_RISE 0x0d
-#define ULPI_USB_INT_EN_FALL 0x10
-#define ULPI_USB_INT_STS 0x13
-#define ULPI_USB_INT_LATCH 0x14
-#define ULPI_DEBUG 0x15
-#define ULPI_SCRATCH 0x16
-/* Optional Carkit Registers */
-#define ULPI_CARCIT_CTRL 0x19
-#define ULPI_CARCIT_INT_DELAY 0x1c
-#define ULPI_CARCIT_INT_EN 0x1d
-#define ULPI_CARCIT_INT_STS 0x20
-#define ULPI_CARCIT_INT_LATCH 0x21
-#define ULPI_CARCIT_PLS_CTRL 0x22
-/* Other Optional Registers */
-#define ULPI_TX_POS_WIDTH 0x25
-#define ULPI_TX_NEG_WIDTH 0x26
-#define ULPI_POLARITY_RECOVERY 0x27
-/* Access Extended Register Set */
-#define ULPI_ACCESS_EXTENDED 0x2f
-/* Vendor Specific */
-#define ULPI_VENDOR_SPECIFIC 0x30
-/* Extended Registers */
-#define ULPI_EXT_VENDOR_SPECIFIC 0x80
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Bits
- */
-
-/* Function Control */
-#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0)
-#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0)
-#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0)
-#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0)
-#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0)
-#define ULPI_FUNC_CTRL_FS4LS (3 << 0)
-#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2)
-#define ULPI_FUNC_CTRL_OPMODE (1 << 3)
-#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3)
-#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3)
-#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3)
-#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3)
-#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3)
-#define ULPI_FUNC_CTRL_RESET (1 << 5)
-#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6)
-
-/* Interface Control */
-#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0)
-#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1)
-#define ULPI_IFC_CTRL_CARKITMODE (1 << 2)
-#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3)
-#define ULPI_IFC_CTRL_AUTORESUME (1 << 4)
-#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5)
-#define ULPI_IFC_CTRL_PASSTHRU (1 << 6)
-#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7)
-
-/* OTG Control */
-#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0)
-#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1)
-#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2)
-#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3)
-#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4)
-#define ULPI_OTG_CTRL_DRVVBUS (1 << 5)
-#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6)
-#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7)
-
-/* USB Interrupt Enable Rising,
- * USB Interrupt Enable Falling,
- * USB Interrupt Status and
- * USB Interrupt Latch
- */
-#define ULPI_INT_HOST_DISCONNECT (1 << 0)
-#define ULPI_INT_VBUS_VALID (1 << 1)
-#define ULPI_INT_SESS_VALID (1 << 2)
-#define ULPI_INT_SESS_END (1 << 3)
-#define ULPI_INT_IDGRD (1 << 4)
-
-/* Debug */
-#define ULPI_DEBUG_LINESTATE0 (1 << 0)
-#define ULPI_DEBUG_LINESTATE1 (1 << 1)
-
-/* Carkit Control */
-#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0)
-#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1)
-#define ULPI_CARKIT_CTRL_TXDEN (1 << 2)
-#define ULPI_CARKIT_CTRL_RXDEN (1 << 3)
-#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4)
-#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5)
-#define ULPI_CARKIT_CTRL_MICEN (1 << 6)
-
-/* Carkit Interrupt Enable */
-#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0)
-#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1)
-#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2)
-#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3)
-#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4)
-
-/* Carkit Interrupt Status and
- * Carkit Interrupt Latch
- */
-#define ULPI_CARKIT_INT_IDFLOAT (1 << 0)
-#define ULPI_CARKIT_INT_CARINTDET (1 << 1)
-#define ULPI_CARKIT_INT_DP (1 << 2)
-
-/* Carkit Pulse Control*/
-#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
-#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
-#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
-#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
-
-/*-------------------------------------------------------------------------*/
-
#if IS_ENABLED(CONFIG_USB_ULPI)
struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
unsigned int flags);
DEVID_FIELD(rio_device_id, asm_did);
DEVID_FIELD(rio_device_id, asm_vid);
+ DEVID(ulpi_device_id);
+ DEVID_FIELD(ulpi_device_id, vendor);
+ DEVID_FIELD(ulpi_device_id, product);
+
return 0;
}
}
ADD_TO_DEVTABLE("rapidio", rio_device_id, do_rio_entry);
+/* Looks like: ulpi:vNpN */
+static int do_ulpi_entry(const char *filename, void *symval,
+ char *alias)
+{
+ DEF_FIELD(symval, ulpi_device_id, vendor);
+ DEF_FIELD(symval, ulpi_device_id, product);
+
+ sprintf(alias, "ulpi:v%04xp%04x", vendor, product);
+
+ return 1;
+}
+ADD_TO_DEVTABLE("ulpi", ulpi_device_id, do_ulpi_entry);
+
/* Does namelen bytes of name exactly match the symbol? */
static bool sym_is(const char *name, unsigned namelen, const char *symbol)
{
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff