blackfin: bf60x: enable gptimer clock source
authorSteven Miao <realmz6@gmail.com>
Wed, 16 May 2012 10:11:10 +0000 (18:11 +0800)
committerBob Liu <lliubbo@gmail.com>
Mon, 21 May 2012 06:54:20 +0000 (14:54 +0800)
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
arch/blackfin/include/asm/gptimers.h
arch/blackfin/kernel/gptimers.c
arch/blackfin/kernel/time-ts.c

index 38bddcb190c8e63529716a97ab6b9b292acb9a87..381e3d621a4c649af391e1a661dfe8c836d8676f 100644 (file)
 # define TIMER8_GROUP_REG      TMRS4_ENABLE
 # define TIMER_GROUP2          1
 #endif
+/*
+ * BF609: 8 timers:
+ */
+#if defined(CONFIG_BF60x)
+# define MAX_BLACKFIN_GPTIMERS 8
+# define TIMER0_GROUP_REG     TIMER_RUN
+#endif
 /*
  * All others: 3 timers:
  */
 # define FS2_TIMER_BIT TIMER1bit
 #endif
 
+#ifdef CONFIG_BF60x
+/*
+ * Timer Configuration Register Bits
+ */
+#define TIMER_EMU_RUN       0x8000
+#define TIMER_BPER_EN       0x4000
+#define TIMER_BWID_EN       0x2000
+#define TIMER_BDLY_EN       0x1000
+#define TIMER_OUT_DIS       0x0800
+#define TIMER_TIN_SEL       0x0400
+#define TIMER_CLK_SEL       0x0300
+#define TIMER_CLK_SCLK      0x0000
+#define TIMER_CLK_ALT_CLK0  0x0100
+#define TIMER_CLK_ALT_CLK1  0x0300
+#define TIMER_PULSE_HI             0x0080
+#define TIMER_SLAVE_TRIG    0x0040
+#define TIMER_IRQ_MODE      0x0030
+#define TIMER_IRQ_ACT_EDGE  0x0000
+#define TIMER_IRQ_DLY       0x0010
+#define TIMER_IRQ_WID_DLY   0x0020
+#define TIMER_IRQ_PER       0x0030
+#define TIMER_MODE          0x000f
+#define TIMER_MODE_WDOG_P   0x0008
+#define TIMER_MODE_WDOG_W   0x0009
+#define TIMER_MODE_PWM_CONT 0x000c
+#define TIMER_MODE_PWM      0x000d
+#define TIMER_MODE_WDTH     0x000a
+#define TIMER_MODE_WDTH_D   0x000b
+#define TIMER_MODE_EXT_CLK  0x000e
+#define TIMER_MODE_PININT   0x000f
+
+/*
+ * Timer Status Register Bits
+ */
+#define TIMER_STATUS_TIMIL0  0x0001
+#define TIMER_STATUS_TIMIL1  0x0002
+#define TIMER_STATUS_TIMIL2  0x0004
+#define TIMER_STATUS_TIMIL3  0x0008
+#define TIMER_STATUS_TIMIL4  0x0010
+#define TIMER_STATUS_TIMIL5  0x0020
+#define TIMER_STATUS_TIMIL6  0x0040
+#define TIMER_STATUS_TIMIL7  0x0080
+
+#define TIMER_STATUS_TOVF0   0x0001    /* timer 0 overflow error */
+#define TIMER_STATUS_TOVF1   0x0002
+#define TIMER_STATUS_TOVF2   0x0004
+#define TIMER_STATUS_TOVF3   0x0008
+#define TIMER_STATUS_TOVF4   0x0010
+#define TIMER_STATUS_TOVF5   0x0020
+#define TIMER_STATUS_TOVF6   0x0040
+#define TIMER_STATUS_TOVF7   0x0080
+
+/*
+ * Timer Slave Enable Status : write 1 to clear
+ */
+#define TIMER_STATUS_TRUN0  0x0001
+#define TIMER_STATUS_TRUN1  0x0002
+#define TIMER_STATUS_TRUN2  0x0004
+#define TIMER_STATUS_TRUN3  0x0008
+#define TIMER_STATUS_TRUN4  0x0010
+#define TIMER_STATUS_TRUN5  0x0020
+#define TIMER_STATUS_TRUN6  0x0040
+#define TIMER_STATUS_TRUN7  0x0080
+
+#else
+
 /*
  * Timer Configuration Register Bits
  */
 #define TIMER_STATUS_TRUN10 0x4000
 #define TIMER_STATUS_TRUN11 0x8000
 
+#endif
+
 /* The actual gptimer API */
 
 void     set_gptimer_pwidth(unsigned int timer_id, uint32_t width);
 uint32_t get_gptimer_pwidth(unsigned int timer_id);
 void     set_gptimer_period(unsigned int timer_id, uint32_t period);
 uint32_t get_gptimer_period(unsigned int timer_id);
+#ifdef CONFIG_BF60x
+void     set_gptimer_delay(unsigned int timer_id, uint32_t delay);
+uint32_t get_gptimer_delay(unsigned int timer_id);
+#endif
 uint32_t get_gptimer_count(unsigned int timer_id);
 int      get_gptimer_intr(unsigned int timer_id);
 void     clear_gptimer_intr(unsigned int timer_id);
@@ -217,16 +296,41 @@ struct bfin_gptimer_regs {
        u32 counter;
        u32 period;
        u32 width;
+#ifdef CONFIG_BF60x
+       u32 delay;
+#endif
 };
 
 /*
  * bfin group timer registers layout
  */
+#ifndef CONFIG_BF60x
 struct bfin_gptimer_group_regs {
        __BFP(enable);
        __BFP(disable);
        u32 status;
 };
+#else
+struct bfin_gptimer_group_regs {
+       __BFP(run);
+       __BFP(enable);
+       __BFP(disable);
+       __BFP(stop_cfg);
+       __BFP(stop_cfg_set);
+       __BFP(stop_cfg_clr);
+       __BFP(data_imsk);
+       __BFP(stat_imsk);
+       __BFP(tr_msk);
+       __BFP(tr_ie);
+       __BFP(data_ilat);
+       __BFP(stat_ilat);
+       __BFP(err_status);
+       __BFP(bcast_per);
+       __BFP(bcast_wid);
+       __BFP(bcast_dly);
+
+};
+#endif
 
 #undef __BFP
 
index 06459f4bf43a61371af9a1dcaf159edb35abd4bb..f7afe570f880c2afc4361e2e273103e3efee3a98 100644 (file)
                printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
 #endif
 
-#define BFIN_TIMER_NUM_GROUP  (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
+#ifndef CONFIG_BF60x
+# define BFIN_TIMER_NUM_GROUP  (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
+#else
+# define BFIN_TIMER_NUM_GROUP  1
+#endif
 
 static struct bfin_gptimer_regs * const timer_regs[MAX_BLACKFIN_GPTIMERS] =
 {
@@ -158,6 +162,74 @@ uint32_t get_gptimer_count(unsigned int timer_id)
 }
 EXPORT_SYMBOL(get_gptimer_count);
 
+#ifdef CONFIG_BF60x
+void set_gptimer_delay(unsigned int timer_id, uint32_t delay)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       bfin_write(&timer_regs[timer_id]->delay, delay);
+       SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_delay);
+
+uint32_t get_gptimer_delay(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       return bfin_read(&timer_regs[timer_id]->delay);
+}
+EXPORT_SYMBOL(get_gptimer_delay);
+#endif
+
+#ifdef CONFIG_BF60x
+int get_gptimer_intr(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat) & timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_intr);
+
+void clear_gptimer_intr(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->data_ilat, timil_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_intr);
+
+int get_gptimer_over(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat) & tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_over);
+
+void clear_gptimer_over(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       bfin_write(&group_regs[BFIN_TIMER_OCTET(timer_id)]->stat_ilat, tovf_mask[timer_id]);
+}
+EXPORT_SYMBOL(clear_gptimer_over);
+
+int get_gptimer_run(unsigned int timer_id)
+{
+       tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+       return !!(bfin_read(&group_regs[BFIN_TIMER_OCTET(timer_id)]->run) & trun_mask[timer_id]);
+}
+EXPORT_SYMBOL(get_gptimer_run);
+
+uint32_t get_gptimer_status(unsigned int group)
+{
+       tassert(group < BFIN_TIMER_NUM_GROUP);
+       return bfin_read(&group_regs[group]->data_ilat);
+}
+EXPORT_SYMBOL(get_gptimer_status);
+
+void set_gptimer_status(unsigned int group, uint32_t value)
+{
+       tassert(group < BFIN_TIMER_NUM_GROUP);
+       bfin_write(&group_regs[group]->data_ilat, value);
+       SSYNC();
+}
+EXPORT_SYMBOL(set_gptimer_status);
+#else
 uint32_t get_gptimer_status(unsigned int group)
 {
        tassert(group < BFIN_TIMER_NUM_GROUP);
@@ -212,6 +284,7 @@ int get_gptimer_run(unsigned int timer_id)
        return !!(read_gptimer_status(timer_id) & trun_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_run);
+#endif
 
 void set_gptimer_config(unsigned int timer_id, uint16_t config)
 {
@@ -231,6 +304,12 @@ EXPORT_SYMBOL(get_gptimer_config);
 void enable_gptimers(uint16_t mask)
 {
        int i;
+#ifdef CONFIG_BF60x
+       uint16_t imask;
+       imask = bfin_read16(TIMER_DATA_IMSK);
+       imask &= ~mask;
+       bfin_write16(TIMER_DATA_IMSK, imask);
+#endif
        tassert((mask & ~BLACKFIN_GPTIMER_IDMASK) == 0);
        for (i = 0; i < BFIN_TIMER_NUM_GROUP; ++i) {
                bfin_write(&group_regs[i]->enable, mask & 0xFF);
@@ -255,10 +334,12 @@ void disable_gptimers(uint16_t mask)
 {
        int i;
        _disable_gptimers(mask);
+#ifndef CONFIG_BF60x
        for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
                if (mask & (1 << i))
                        bfin_write(&group_regs[BFIN_TIMER_OCTET(i)]->status, trun_mask[i]);
        SSYNC();
+#endif
 }
 EXPORT_SYMBOL(disable_gptimers);
 
index d98f2d69b0c4a3d29dd812c1112a192e66721940..f608f02f29a3505dfe4c84055e90e782f2ebb795 100644 (file)
@@ -66,8 +66,14 @@ void __init setup_gptimer0(void)
 {
        disable_gptimers(TIMER0bit);
 
+#ifdef CONFIG_BF60x
+       bfin_write16(TIMER_DATA_IMSK, 0);
+       set_gptimer_config(TIMER0_id,  TIMER_OUT_DIS
+               | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
+#else
        set_gptimer_config(TIMER0_id, \
                TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+#endif
        set_gptimer_period(TIMER0_id, -1);
        set_gptimer_pwidth(TIMER0_id, -2);
        SSYNC();
@@ -135,9 +141,15 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
 {
        switch (mode) {
        case CLOCK_EVT_MODE_PERIODIC: {
+#ifndef CONFIG_BF60x
                set_gptimer_config(TIMER0_id, \
                        TIMER_OUT_DIS | TIMER_IRQ_ENA | \
                        TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+#else
+               set_gptimer_config(TIMER0_id,  TIMER_OUT_DIS
+                       | TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
+#endif
+
                set_gptimer_period(TIMER0_id, get_sclk() / HZ);
                set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
                enable_gptimers(TIMER0bit);
@@ -145,8 +157,14 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
        }
        case CLOCK_EVT_MODE_ONESHOT:
                disable_gptimers(TIMER0bit);
+#ifndef CONFIG_BF60x
                set_gptimer_config(TIMER0_id, \
                        TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+#else
+               set_gptimer_config(TIMER0_id, TIMER_OUT_DIS | TIMER_MODE_PWM
+                       | TIMER_PULSE_HI | TIMER_IRQ_WID_DLY);
+#endif
+
                set_gptimer_period(TIMER0_id, 0);
                break;
        case CLOCK_EVT_MODE_UNUSED:
@@ -160,7 +178,7 @@ static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
 
 static void bfin_gptmr0_ack(void)
 {
-       set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
+       clear_gptimer_intr(TIMER0_id);
 }
 
 static void __init bfin_gptmr0_init(void)
@@ -197,7 +215,7 @@ static struct clock_event_device clockevent_gptmr0 = {
        .rating         = 300,
        .irq            = IRQ_TIMER0,
        .shift          = 32,
-       .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+       .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
        .set_next_event = bfin_gptmr0_set_next_event,
        .set_mode       = bfin_gptmr0_set_mode,
 };
@@ -307,6 +325,11 @@ void bfin_coretmr_clockevent_init(void)
        unsigned int cpu = smp_processor_id();
        struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
 
+#ifdef CONFIG_SMP
+       evt->broadcast = smp_timer_broadcast;
+#endif
+
+
 #ifdef CONFIG_SMP
        evt->broadcast = smp_timer_broadcast;
 #endif