--- /dev/null
+/* This is the serial hardware link layer (HLL) for the Gigaset 307x isdn
+ * DECT base (aka Sinus 45 isdn) using the RS232 DECT data module M101,
+ * written as a line discipline.
+ *
+ * =====================================================================
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/poll.h>
+
+/* Version Information */
+#define DRIVER_AUTHOR "Tilman Schmidt"
+#define DRIVER_DESC "Serial Driver for Gigaset 307x using Siemens M101"
+
+#define GIGASET_MINORS 1
+#define GIGASET_MINOR 0
+#define GIGASET_MODULENAME "ser_gigaset"
+#define GIGASET_DEVNAME "ttyGS"
+
+/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+#define IF_WRITEBUF 264
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_GIGASET_M101);
+
+static int startmode = SM_ISDN;
+module_param(startmode, int, S_IRUGO);
+MODULE_PARM_DESC(startmode, "initial operation mode");
+static int cidmode = 1;
+module_param(cidmode, int, S_IRUGO);
+MODULE_PARM_DESC(cidmode, "stay in CID mode when idle");
+
+static struct gigaset_driver *driver;
+
+struct ser_cardstate {
+ struct platform_device dev;
+ struct tty_struct *tty;
+ atomic_t refcnt;
+ struct mutex dead_mutex;
+};
+
+static struct platform_driver device_driver = {
+ .driver = {
+ .name = GIGASET_MODULENAME,
+ },
+};
+
+static void flush_send_queue(struct cardstate *);
+
+/* transmit data from current open skb
+ * result: number of bytes sent or error code < 0
+ */
+static int write_modem(struct cardstate *cs)
+{
+ struct tty_struct *tty = cs->hw.ser->tty;
+ struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
+ struct sk_buff *skb = bcs->tx_skb;
+ int sent;
+
+ if (!tty || !tty->driver || !skb)
+ return -EFAULT;
+
+ if (!skb->len) {
+ dev_kfree_skb_any(skb);
+ bcs->tx_skb = NULL;
+ return -EINVAL;
+ }
+
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ sent = tty->driver->write(tty, skb->data, skb->len);
+ gig_dbg(DEBUG_OUTPUT, "write_modem: sent %d", sent);
+ if (sent < 0) {
+ /* error */
+ flush_send_queue(cs);
+ return sent;
+ }
+ skb_pull(skb, sent);
+ if (!skb->len) {
+ /* skb sent completely */
+ gigaset_skb_sent(bcs, skb);
+
+ gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
+ (unsigned long) skb);
+ dev_kfree_skb_any(skb);
+ bcs->tx_skb = NULL;
+ }
+ return sent;
+}
+
+/*
+ * transmit first queued command buffer
+ * result: number of bytes sent or error code < 0
+ */
+static int send_cb(struct cardstate *cs)
+{
+ struct tty_struct *tty = cs->hw.ser->tty;
+ struct cmdbuf_t *cb, *tcb;
+ unsigned long flags;
+ int sent = 0;
+
+ if (!tty || !tty->driver)
+ return -EFAULT;
+
+ cb = cs->cmdbuf;
+ if (!cb)
+ return 0; /* nothing to do */
+
+ if (cb->len) {
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ sent = tty->driver->write(tty, cb->buf + cb->offset, cb->len);
+ if (sent < 0) {
+ /* error */
+ gig_dbg(DEBUG_OUTPUT, "send_cb: write error %d", sent);
+ flush_send_queue(cs);
+ return sent;
+ }
+ cb->offset += sent;
+ cb->len -= sent;
+ gig_dbg(DEBUG_OUTPUT, "send_cb: sent %d, left %u, queued %u",
+ sent, cb->len, cs->cmdbytes);
+ }
+
+ while (cb && !cb->len) {
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cs->cmdbytes -= cs->curlen;
+ tcb = cb;
+ cs->cmdbuf = cb = cb->next;
+ if (cb) {
+ cb->prev = NULL;
+ cs->curlen = cb->len;
+ } else {
+ cs->lastcmdbuf = NULL;
+ cs->curlen = 0;
+ }
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ if (tcb->wake_tasklet)
+ tasklet_schedule(tcb->wake_tasklet);
+ kfree(tcb);
+ }
+ return sent;
+}
+
+/*
+ * send queue tasklet
+ * If there is already a skb opened, put data to the transfer buffer
+ * by calling "write_modem".
+ * Otherwise take a new skb out of the queue.
+ */
+static void gigaset_modem_fill(unsigned long data)
+{
+ struct cardstate *cs = (struct cardstate *) data;
+ struct bc_state *bcs;
+ int sent = 0;
+
+ if (!cs || !(bcs = cs->bcs)) {
+ gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
+ return;
+ }
+ if (!bcs->tx_skb) {
+ /* no skb is being sent; send command if any */
+ sent = send_cb(cs);
+ gig_dbg(DEBUG_OUTPUT, "%s: send_cb -> %d", __func__, sent);
+ if (sent)
+ /* something sent or error */
+ return;
+
+ /* no command to send; get skb */
+ if (!(bcs->tx_skb = skb_dequeue(&bcs->squeue)))
+ /* no skb either, nothing to do */
+ return;
+
+ gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)",
+ (unsigned long) bcs->tx_skb);
+ }
+
+ /* send skb */
+ gig_dbg(DEBUG_OUTPUT, "%s: tx_skb", __func__);
+ if (write_modem(cs) < 0)
+ gig_dbg(DEBUG_OUTPUT, "%s: write_modem failed", __func__);
+}
+
+/*
+ * throw away all data queued for sending
+ */
+static void flush_send_queue(struct cardstate *cs)
+{
+ struct sk_buff *skb;
+ struct cmdbuf_t *cb;
+ unsigned long flags;
+
+ /* command queue */
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ while ((cb = cs->cmdbuf) != NULL) {
+ cs->cmdbuf = cb->next;
+ if (cb->wake_tasklet)
+ tasklet_schedule(cb->wake_tasklet);
+ kfree(cb);
+ }
+ cs->cmdbuf = cs->lastcmdbuf = NULL;
+ cs->cmdbytes = cs->curlen = 0;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ /* data queue */
+ if (cs->bcs->tx_skb)
+ dev_kfree_skb_any(cs->bcs->tx_skb);
+ while ((skb = skb_dequeue(&cs->bcs->squeue)) != NULL)
+ dev_kfree_skb_any(skb);
+}
+
+
+/* Gigaset Driver Interface */
+/* ======================== */
+
+/*
+ * queue an AT command string for transmission to the Gigaset device
+ * parameters:
+ * cs controller state structure
+ * buf buffer containing the string to send
+ * len number of characters to send
+ * wake_tasklet tasklet to run when transmission is complete, or NULL
+ * return value:
+ * number of bytes queued, or error code < 0
+ */
+static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
+ int len, struct tasklet_struct *wake_tasklet)
+{
+ struct cmdbuf_t *cb;
+ unsigned long flags;
+
+ gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ?
+ DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+ "CMD Transmit", len, buf);
+
+ if (len <= 0)
+ return 0;
+
+ if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+ dev_err(cs->dev, "%s: out of memory!\n", __func__);
+ return -ENOMEM;
+ }
+
+ memcpy(cb->buf, buf, len);
+ cb->len = len;
+ cb->offset = 0;
+ cb->next = NULL;
+ cb->wake_tasklet = wake_tasklet;
+
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ cb->prev = cs->lastcmdbuf;
+ if (cs->lastcmdbuf)
+ cs->lastcmdbuf->next = cb;
+ else {
+ cs->cmdbuf = cb;
+ cs->curlen = len;
+ }
+ cs->cmdbytes += len;
+ cs->lastcmdbuf = cb;
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+ spin_lock_irqsave(&cs->lock, flags);
+ if (cs->connected)
+ tasklet_schedule(&cs->write_tasklet);
+ spin_unlock_irqrestore(&cs->lock, flags);
+ return len;
+}
+
+/*
+ * tty_driver.write_room interface routine
+ * return number of characters the driver will accept to be written
+ * parameter:
+ * controller state structure
+ * return value:
+ * number of characters
+ */
+static int gigaset_write_room(struct cardstate *cs)
+{
+ unsigned bytes;
+
+ bytes = cs->cmdbytes;
+ return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
+}
+
+/*
+ * tty_driver.chars_in_buffer interface routine
+ * return number of characters waiting to be sent
+ * parameter:
+ * controller state structure
+ * return value:
+ * number of characters
+ */
+static int gigaset_chars_in_buffer(struct cardstate *cs)
+{
+ return cs->cmdbytes;
+}
+
+/*
+ * implementation of ioctl(GIGASET_BRKCHARS)
+ * parameter:
+ * controller state structure
+ * return value:
+ * -EINVAL (unimplemented function)
+ */
+static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
+{
+ /* not implemented */
+ return -EINVAL;
+}
+
+/*
+ * Open B channel
+ * Called by "do_action" in ev-layer.c
+ */
+static int gigaset_init_bchannel(struct bc_state *bcs)
+{
+ /* nothing to do for M10x */
+ gigaset_bchannel_up(bcs);
+ return 0;
+}
+
+/*
+ * Close B channel
+ * Called by "do_action" in ev-layer.c
+ */
+static int gigaset_close_bchannel(struct bc_state *bcs)
+{
+ /* nothing to do for M10x */
+ gigaset_bchannel_down(bcs);
+ return 0;
+}
+
+/*
+ * Set up B channel structure
+ * This is called by "gigaset_initcs" in common.c
+ */
+static int gigaset_initbcshw(struct bc_state *bcs)
+{
+ /* unused */
+ bcs->hw.ser = NULL;
+ return 1;
+}
+
+/*
+ * Free B channel structure
+ * Called by "gigaset_freebcs" in common.c
+ */
+static int gigaset_freebcshw(struct bc_state *bcs)
+{
+ /* unused */
+ return 1;
+}
+
+/*
+ * Reinitialize B channel structure
+ * This is called by "bcs_reinit" in common.c
+ */
+static void gigaset_reinitbcshw(struct bc_state *bcs)
+{
+ /* nothing to do for M10x */
+}
+
+/*
+ * Free hardware specific device data
+ * This will be called by "gigaset_freecs" in common.c
+ */
+static void gigaset_freecshw(struct cardstate *cs)
+{
+ tasklet_kill(&cs->write_tasklet);
+ if (!cs->hw.ser)
+ return;
+ dev_set_drvdata(&cs->hw.ser->dev.dev, NULL);
+ platform_device_unregister(&cs->hw.ser->dev);
+ kfree(cs->hw.ser);
+ cs->hw.ser = NULL;
+}
+
+static void gigaset_device_release(struct device *dev)
+{
+ struct platform_device *pdev =
+ container_of(dev, struct platform_device, dev);
+
+ /* adapted from platform_device_release() in drivers/base/platform.c */
+ //FIXME is this actually necessary?
+ kfree(dev->platform_data);
+ kfree(pdev->resource);
+}
+
+/*
+ * Set up hardware specific device data
+ * This is called by "gigaset_initcs" in common.c
+ */
+static int gigaset_initcshw(struct cardstate *cs)
+{
+ int rc;
+
+ if (!(cs->hw.ser = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL))) {
+ err("%s: out of memory!", __func__);
+ return 0;
+ }
+
+ cs->hw.ser->dev.name = GIGASET_MODULENAME;
+ cs->hw.ser->dev.id = cs->minor_index;
+ cs->hw.ser->dev.dev.release = gigaset_device_release;
+ if ((rc = platform_device_register(&cs->hw.ser->dev)) != 0) {
+ err("error %d registering platform device", rc);
+ kfree(cs->hw.ser);
+ cs->hw.ser = NULL;
+ return 0;
+ }
+ dev_set_drvdata(&cs->hw.ser->dev.dev, cs);
+
+ tasklet_init(&cs->write_tasklet,
+ &gigaset_modem_fill, (unsigned long) cs);
+ return 1;
+}
+
+/*
+ * set modem control lines
+ * Parameters:
+ * card state structure
+ * modem control line state ([TIOCM_DTR]|[TIOCM_RTS])
+ * Called by "gigaset_start" and "gigaset_enterconfigmode" in common.c
+ * and by "if_lock" and "if_termios" in interface.c
+ */
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state)
+{
+ struct tty_struct *tty = cs->hw.ser->tty;
+ unsigned int set, clear;
+
+ if (!tty || !tty->driver || !tty->driver->tiocmset)
+ return -EFAULT;
+ set = new_state & ~old_state;
+ clear = old_state & ~new_state;
+ if (!set && !clear)
+ return 0;
+ gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
+ return tty->driver->tiocmset(tty, NULL, set, clear);
+}
+
+static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+
+static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
+{
+ return -EINVAL;
+}
+
+static struct gigaset_ops ops = {
+ gigaset_write_cmd,
+ gigaset_write_room,
+ gigaset_chars_in_buffer,
+ gigaset_brkchars,
+ gigaset_init_bchannel,
+ gigaset_close_bchannel,
+ gigaset_initbcshw,
+ gigaset_freebcshw,
+ gigaset_reinitbcshw,
+ gigaset_initcshw,
+ gigaset_freecshw,
+ gigaset_set_modem_ctrl,
+ gigaset_baud_rate,
+ gigaset_set_line_ctrl,
+ gigaset_m10x_send_skb, /* asyncdata.c */
+ gigaset_m10x_input, /* asyncdata.c */
+};
+
+
+/* Line Discipline Interface */
+/* ========================= */
+
+/* helper functions for cardstate refcounting */
+static struct cardstate *cs_get(struct tty_struct *tty)
+{
+ struct cardstate *cs = tty->disc_data;
+
+ if (!cs || !cs->hw.ser) {
+ gig_dbg(DEBUG_ANY, "%s: no cardstate", __func__);
+ return NULL;
+ }
+ atomic_inc(&cs->hw.ser->refcnt);
+ return cs;
+}
+
+static void cs_put(struct cardstate *cs)
+{
+ if (atomic_dec_and_test(&cs->hw.ser->refcnt))
+ mutex_unlock(&cs->hw.ser->dead_mutex);
+}
+
+/*
+ * Called by the tty driver when the line discipline is pushed onto the tty.
+ * Called in process context.
+ */
+static int
+gigaset_tty_open(struct tty_struct *tty)
+{
+ struct cardstate *cs;
+
+ gig_dbg(DEBUG_INIT, "Starting HLL for Gigaset M101");
+
+ info(DRIVER_AUTHOR);
+ info(DRIVER_DESC);
+
+ if (!driver) {
+ err("%s: no driver structure", __func__);
+ return -ENODEV;
+ }
+
+ /* allocate memory for our device state and intialize it */
+ if (!(cs = gigaset_initcs(driver, 1, 1, 0, cidmode,
+ GIGASET_MODULENAME)))
+ goto error;
+
+ cs->dev = &cs->hw.ser->dev.dev;
+ cs->hw.ser->tty = tty;
+ mutex_init(&cs->hw.ser->dead_mutex);
+ atomic_set(&cs->hw.ser->refcnt, 1);
+
+ tty->disc_data = cs;
+
+ /* OK.. Initialization of the datastructures and the HW is done.. Now
+ * startup system and notify the LL that we are ready to run
+ */
+ if (startmode == SM_LOCKED)
+ atomic_set(&cs->mstate, MS_LOCKED);
+ if (!gigaset_start(cs)) {
+ tasklet_kill(&cs->write_tasklet);
+ goto error;
+ }
+
+ gig_dbg(DEBUG_INIT, "Startup of HLL done");
+ mutex_lock(&cs->hw.ser->dead_mutex);
+ return 0;
+
+error:
+ gig_dbg(DEBUG_INIT, "Startup of HLL failed");
+ tty->disc_data = NULL;
+ gigaset_freecs(cs);
+ return -ENODEV;
+}
+
+/*
+ * Called by the tty driver when the line discipline is removed.
+ * Called from process context.
+ */
+static void
+gigaset_tty_close(struct tty_struct *tty)
+{
+ struct cardstate *cs = tty->disc_data;
+
+ gig_dbg(DEBUG_INIT, "Stopping HLL for Gigaset M101");
+
+ if (!cs) {
+ gig_dbg(DEBUG_INIT, "%s: no cardstate", __func__);
+ return;
+ }
+
+ /* prevent other callers from entering ldisc methods */
+ tty->disc_data = NULL;
+
+ if (!cs->hw.ser)
+ err("%s: no hw cardstate", __func__);
+ else {
+ /* wait for running methods to finish */
+ if (!atomic_dec_and_test(&cs->hw.ser->refcnt))
+ mutex_lock(&cs->hw.ser->dead_mutex);
+ }
+
+ /* stop operations */
+ gigaset_stop(cs);
+ tasklet_kill(&cs->write_tasklet);
+ flush_send_queue(cs);
+ cs->dev = NULL;
+ gigaset_freecs(cs);
+
+ gig_dbg(DEBUG_INIT, "Shutdown of HLL done");
+}
+
+/*
+ * Called by the tty driver when the tty line is hung up.
+ * Wait for I/O to driver to complete and unregister ISDN device.
+ * This is already done by the close routine, so just call that.
+ * Called from process context.
+ */
+static int gigaset_tty_hangup(struct tty_struct *tty)
+{
+ gigaset_tty_close(tty);
+ return 0;
+}
+
+/*
+ * Read on the tty.
+ * Unused, received data goes only to the Gigaset driver.
+ */
+static ssize_t
+gigaset_tty_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t count)
+{
+ return -EAGAIN;
+}
+
+/*
+ * Write on the tty.
+ * Unused, transmit data comes only from the Gigaset driver.
+ */
+static ssize_t
+gigaset_tty_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *buf, size_t count)
+{
+ return -EAGAIN;
+}
+
+/*
+ * Ioctl on the tty.
+ * Called in process context only.
+ * May be re-entered by multiple ioctl calling threads.
+ */
+static int
+gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct cardstate *cs = cs_get(tty);
+ int rc, val;
+ int __user *p = (int __user *)arg;
+
+ if (!cs)
+ return -ENXIO;
+
+ switch (cmd) {
+ case TCGETS:
+ case TCGETA:
+ /* pass through to underlying serial device */
+ rc = n_tty_ioctl(tty, file, cmd, arg);
+ break;
+
+ case TCFLSH:
+ /* flush our buffers and the serial port's buffer */
+ switch (arg) {
+ case TCIFLUSH:
+ /* no own input buffer to flush */
+ break;
+ case TCIOFLUSH:
+ case TCOFLUSH:
+ flush_send_queue(cs);
+ break;
+ }
+ /* flush the serial port's buffer */
+ rc = n_tty_ioctl(tty, file, cmd, arg);
+ break;
+
+ case FIONREAD:
+ /* unused, always return zero */
+ val = 0;
+ rc = put_user(val, p);
+ break;
+
+ default:
+ rc = -ENOIOCTLCMD;
+ }
+
+ cs_put(cs);
+ return rc;
+}
+
+/*
+ * Poll on the tty.
+ * Unused, always return zero.
+ */
+static unsigned int
+gigaset_tty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
+{
+ return 0;
+}
+
+/*
+ * Called by the tty driver when a block of data has been received.
+ * Will not be re-entered while running but other ldisc functions
+ * may be called in parallel.
+ * Can be called from hard interrupt level as well as soft interrupt
+ * level or mainline.
+ * Parameters:
+ * tty tty structure
+ * buf buffer containing received characters
+ * cflags buffer containing error flags for received characters (ignored)
+ * count number of received characters
+ */
+static void
+gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf,
+ char *cflags, int count)
+{
+ struct cardstate *cs = cs_get(tty);
+ unsigned tail, head, n;
+ struct inbuf_t *inbuf;
+
+ if (!cs)
+ return;
+ if (!(inbuf = cs->inbuf)) {
+ dev_err(cs->dev, "%s: no inbuf\n", __func__);
+ cs_put(cs);
+ return;
+ }
+
+ tail = atomic_read(&inbuf->tail);
+ head = atomic_read(&inbuf->head);
+ gig_dbg(DEBUG_INTR, "buffer state: %u -> %u, receive %u bytes",
+ head, tail, count);
+
+ if (head <= tail) {
+ /* possible buffer wraparound */
+ n = min_t(unsigned, count, RBUFSIZE - tail);
+ memcpy(inbuf->data + tail, buf, n);
+ tail = (tail + n) % RBUFSIZE;
+ buf += n;
+ count -= n;
+ }
+
+ if (count > 0) {
+ /* tail < head and some data left */
+ n = head - tail - 1;
+ if (count > n) {
+ dev_err(cs->dev,
+ "inbuf overflow, discarding %d bytes\n",
+ count - n);
+ count = n;
+ }
+ memcpy(inbuf->data + tail, buf, count);
+ tail += count;
+ }
+
+ gig_dbg(DEBUG_INTR, "setting tail to %u", tail);
+ atomic_set(&inbuf->tail, tail);
+
+ /* Everything was received .. Push data into handler */
+ gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
+ gigaset_schedule_event(cs);
+ cs_put(cs);
+}
+
+/*
+ * Called by the tty driver when there's room for more data to send.
+ */
+static void
+gigaset_tty_wakeup(struct tty_struct *tty)
+{
+ struct cardstate *cs = cs_get(tty);
+
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ if (!cs)
+ return;
+ tasklet_schedule(&cs->write_tasklet);
+ cs_put(cs);
+}
+
+static struct tty_ldisc gigaset_ldisc = {
+ .owner = THIS_MODULE,
+ .magic = TTY_LDISC_MAGIC,
+ .name = "ser_gigaset",
+ .open = gigaset_tty_open,
+ .close = gigaset_tty_close,
+ .hangup = gigaset_tty_hangup,
+ .read = gigaset_tty_read,
+ .write = gigaset_tty_write,
+ .ioctl = gigaset_tty_ioctl,
+ .poll = gigaset_tty_poll,
+ .receive_buf = gigaset_tty_receive,
+ .write_wakeup = gigaset_tty_wakeup,
+};
+
+
+/* Initialization / Shutdown */
+/* ========================= */
+
+static int __init ser_gigaset_init(void)
+{
+ int rc;
+
+ gig_dbg(DEBUG_INIT, "%s", __func__);
+ if ((rc = platform_driver_register(&device_driver)) != 0) {
+ err("error %d registering platform driver", rc);
+ return rc;
+ }
+
+ /* allocate memory for our driver state and intialize it */
+ if (!(driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+ GIGASET_MODULENAME, GIGASET_DEVNAME,
+ &ops, THIS_MODULE)))
+ goto error;
+
+ if ((rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc)) != 0) {
+ err("error %d registering line discipline", rc);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ if (driver) {
+ gigaset_freedriver(driver);
+ driver = NULL;
+ }
+ platform_driver_unregister(&device_driver);
+ return rc;
+}
+
+static void __exit ser_gigaset_exit(void)
+{
+ int rc;
+
+ gig_dbg(DEBUG_INIT, "%s", __func__);
+
+ if (driver) {
+ gigaset_freedriver(driver);
+ driver = NULL;
+ }
+
+ if ((rc = tty_unregister_ldisc(N_GIGASET_M101)) != 0)
+ err("error %d unregistering line discipline", rc);
+
+ platform_driver_unregister(&device_driver);
+}
+
+module_init(ser_gigaset_init);
+module_exit(ser_gigaset_exit);
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff