BUILD_BUG_ON(offsetof(struct batadv_unicast_packet, dest) != 4);
BUILD_BUG_ON(offsetof(struct batadv_unicast_tvlv_packet, dst) != 4);
BUILD_BUG_ON(offsetof(struct batadv_frag_packet, dest) != 4);
- BUILD_BUG_ON(offsetof(struct batadv_icmp_packet, icmph.dst) != 4);
- BUILD_BUG_ON(offsetof(struct batadv_icmp_packet_rr, icmph.dst) != 4);
+ BUILD_BUG_ON(offsetof(struct batadv_icmp_packet, dst) != 4);
+ BUILD_BUG_ON(offsetof(struct batadv_icmp_packet_rr, dst) != 4);
/* broadcast packet */
batadv_rx_handler[BATADV_BCAST] = batadv_recv_bcast_packet;
#define BATADV_OGM_HLEN sizeof(struct batadv_ogm_packet)
/**
- * batadv_icmp_header - common ICMP header
+ * batadv_icmp_header - common members among all the ICMP packets
* @packet_type: batman-adv packet type, part of the general header
* @version: batman-adv protocol version, part of the genereal header
* @ttl: time to live for this packet, part of the genereal header
* @dst: address of the destination node
* @orig: address of the source node
* @uid: local ICMP socket identifier
+ * @align: not used - useful for alignment purposes only
+ *
+ * This structure is used for ICMP packets parsing only and it is never sent
+ * over the wire. The alignment field at the end is there to ensure that
+ * members are padded the same way as they are in real packets.
*/
struct batadv_icmp_header {
uint8_t packet_type;
uint8_t dst[ETH_ALEN];
uint8_t orig[ETH_ALEN];
uint8_t uid;
+ uint8_t align[3];
};
/**
* batadv_icmp_packet - ICMP packet
- * @icmph: common ICMP header
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
* @reserved: not used - useful for alignment
* @seqno: ICMP sequence number
*/
struct batadv_icmp_packet {
- struct batadv_icmp_header icmph;
+ uint8_t packet_type;
+ uint8_t version;
+ uint8_t ttl;
+ uint8_t msg_type; /* see ICMP message types above */
+ uint8_t dst[ETH_ALEN];
+ uint8_t orig[ETH_ALEN];
+ uint8_t uid;
uint8_t reserved;
__be16 seqno;
};
/**
* batadv_icmp_packet_rr - ICMP RouteRecord packet
- * @icmph: common ICMP header
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the genereal header
+ * @ttl: time to live for this packet, part of the genereal header
+ * @msg_type: ICMP packet type
+ * @dst: address of the destination node
+ * @orig: address of the source node
+ * @uid: local ICMP socket identifier
* @rr_cur: number of entries the rr array
* @seqno: ICMP sequence number
* @rr: route record array
*/
struct batadv_icmp_packet_rr {
- struct batadv_icmp_header icmph;
+ uint8_t packet_type;
+ uint8_t version;
+ uint8_t ttl;
+ uint8_t msg_type; /* see ICMP message types above */
+ uint8_t dst[ETH_ALEN];
+ uint8_t orig[ETH_ALEN];
+ uint8_t uid;
uint8_t rr_cur;
__be16 seqno;
uint8_t rr[BATADV_RR_LEN][ETH_ALEN];
icmp_packet = (struct batadv_icmp_packet *)skb->data;
/* send TTL exceeded if packet is an echo request (traceroute) */
- if (icmp_packet->icmph.msg_type != BATADV_ECHO_REQUEST) {
+ if (icmp_packet->msg_type != BATADV_ECHO_REQUEST) {
pr_debug("Warning - can't forward icmp packet from %pM to %pM: ttl exceeded\n",
- icmp_packet->icmph.orig, icmp_packet->icmph.dst);
+ icmp_packet->orig, icmp_packet->dst);
goto out;
}
goto out;
/* get routing information */
- orig_node = batadv_orig_hash_find(bat_priv, icmp_packet->icmph.orig);
+ orig_node = batadv_orig_hash_find(bat_priv, icmp_packet->orig);
if (!orig_node)
goto out;
icmp_packet = (struct batadv_icmp_packet *)skb->data;
- memcpy(icmp_packet->icmph.dst, icmp_packet->icmph.orig, ETH_ALEN);
- memcpy(icmp_packet->icmph.orig, primary_if->net_dev->dev_addr,
+ memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
+ memcpy(icmp_packet->orig, primary_if->net_dev->dev_addr,
ETH_ALEN);
- icmp_packet->icmph.msg_type = BATADV_TTL_EXCEEDED;
- icmp_packet->icmph.ttl = BATADV_TTL;
+ icmp_packet->msg_type = BATADV_TTL_EXCEEDED;
+ icmp_packet->ttl = BATADV_TTL;
if (batadv_send_skb_to_orig(skb, orig_node, NULL) != NET_XMIT_DROP)
ret = NET_RX_SUCCESS;