#include <linux/slab.h>
#include <linux/vgaarb.h>
+
+/* Access macro for slots in vblank timestamp ringbuffer. */
+#define vblanktimestamp(dev, crtc, count) ( \
+ (dev)->_vblank_time[(crtc) * DRM_VBLANKTIME_RBSIZE + \
+ ((count) % DRM_VBLANKTIME_RBSIZE)])
+
+/* Retry timestamp calculation up to 3 times to satisfy
+ * drm_timestamp_precision before giving up.
+ */
+#define DRM_TIMESTAMP_MAXRETRIES 3
+
+/* Threshold in nanoseconds for detection of redundant
+ * vblank irq in drm_handle_vblank(). 1 msec should be ok.
+ */
+#define DRM_REDUNDANT_VBLIRQ_THRESH_NS 1000000
+
/**
* Get interrupt from bus id.
*
return 0;
}
+/*
+ * Clear vblank timestamp buffer for a crtc.
+ */
+static void clear_vblank_timestamps(struct drm_device *dev, int crtc)
+{
+ memset(&dev->_vblank_time[crtc * DRM_VBLANKTIME_RBSIZE], 0,
+ DRM_VBLANKTIME_RBSIZE * sizeof(struct timeval));
+}
+
+/*
+ * Disable vblank irq's on crtc, make sure that last vblank count
+ * of hardware and corresponding consistent software vblank counter
+ * are preserved, even if there are any spurious vblank irq's after
+ * disable.
+ */
+static void vblank_disable_and_save(struct drm_device *dev, int crtc)
+{
+ unsigned long irqflags;
+ u32 vblcount;
+ s64 diff_ns;
+ int vblrc;
+ struct timeval tvblank;
+
+ /* Prevent vblank irq processing while disabling vblank irqs,
+ * so no updates of timestamps or count can happen after we've
+ * disabled. Needed to prevent races in case of delayed irq's.
+ * Disable preemption, so vblank_time_lock is held as short as
+ * possible, even under a kernel with PREEMPT_RT patches.
+ */
+ preempt_disable();
+ spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
+
+ dev->driver->disable_vblank(dev, crtc);
+ dev->vblank_enabled[crtc] = 0;
+
+ /* No further vblank irq's will be processed after
+ * this point. Get current hardware vblank count and
+ * vblank timestamp, repeat until they are consistent.
+ *
+ * FIXME: There is still a race condition here and in
+ * drm_update_vblank_count() which can cause off-by-one
+ * reinitialization of software vblank counter. If gpu
+ * vblank counter doesn't increment exactly at the leading
+ * edge of a vblank interval, then we can lose 1 count if
+ * we happen to execute between start of vblank and the
+ * delayed gpu counter increment.
+ */
+ do {
+ dev->last_vblank[crtc] = dev->driver->get_vblank_counter(dev, crtc);
+ vblrc = drm_get_last_vbltimestamp(dev, crtc, &tvblank, 0);
+ } while (dev->last_vblank[crtc] != dev->driver->get_vblank_counter(dev, crtc));
+
+ /* Compute time difference to stored timestamp of last vblank
+ * as updated by last invocation of drm_handle_vblank() in vblank irq.
+ */
+ vblcount = atomic_read(&dev->_vblank_count[crtc]);
+ diff_ns = timeval_to_ns(&tvblank) -
+ timeval_to_ns(&vblanktimestamp(dev, crtc, vblcount));
+
+ /* If there is at least 1 msec difference between the last stored
+ * timestamp and tvblank, then we are currently executing our
+ * disable inside a new vblank interval, the tvblank timestamp
+ * corresponds to this new vblank interval and the irq handler
+ * for this vblank didn't run yet and won't run due to our disable.
+ * Therefore we need to do the job of drm_handle_vblank() and
+ * increment the vblank counter by one to account for this vblank.
+ *
+ * Skip this step if there isn't any high precision timestamp
+ * available. In that case we can't account for this and just
+ * hope for the best.
+ */
+ if ((vblrc > 0) && (abs(diff_ns) > 1000000))
+ atomic_inc(&dev->_vblank_count[crtc]);
+
+ /* Invalidate all timestamps while vblank irq's are off. */
+ clear_vblank_timestamps(dev, crtc);
+
+ spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
+ preempt_enable();
+}
+
static void vblank_disable_fn(unsigned long arg)
{
struct drm_device *dev = (struct drm_device *)arg;
if (atomic_read(&dev->vblank_refcount[i]) == 0 &&
dev->vblank_enabled[i]) {
DRM_DEBUG("disabling vblank on crtc %d\n", i);
- dev->last_vblank[i] =
- dev->driver->get_vblank_counter(dev, i);
- dev->driver->disable_vblank(dev, i);
- dev->vblank_enabled[i] = 0;
+ vblank_disable_and_save(dev, i);
}
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
kfree(dev->last_vblank);
kfree(dev->last_vblank_wait);
kfree(dev->vblank_inmodeset);
+ kfree(dev->_vblank_time);
dev->num_crtcs = 0;
}
setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
(unsigned long)dev);
spin_lock_init(&dev->vbl_lock);
+ spin_lock_init(&dev->vblank_time_lock);
+
dev->num_crtcs = num_crtcs;
dev->vbl_queue = kmalloc(sizeof(wait_queue_head_t) * num_crtcs,
if (!dev->vblank_inmodeset)
goto err;
+ dev->_vblank_time = kcalloc(num_crtcs * DRM_VBLANKTIME_RBSIZE,
+ sizeof(struct timeval), GFP_KERNEL);
+ if (!dev->_vblank_time)
+ goto err;
+
+ DRM_INFO("Supports vblank timestamp caching Rev 1 (10.10.2010).\n");
+
+ /* Driver specific high-precision vblank timestamping supported? */
+ if (dev->driver->get_vblank_timestamp)
+ DRM_INFO("Driver supports precise vblank timestamp query.\n");
+ else
+ DRM_INFO("No driver support for vblank timestamp query.\n");
+
/* Zero per-crtc vblank stuff */
for (i = 0; i < num_crtcs; i++) {
init_waitqueue_head(&dev->vbl_queue[i]);
*
* Calls the driver's \c drm_driver_irq_uninstall() function, and stops the irq.
*/
-int drm_irq_uninstall(struct drm_device * dev)
+int drm_irq_uninstall(struct drm_device *dev)
{
unsigned long irqflags;
int irq_enabled, i;
{
struct drm_control *ctl = data;
- /* if we haven't irq we fallback for compatibility reasons - this used to be a separate function in drm_dma.h */
+ /* if we haven't irq we fallback for compatibility reasons -
+ * this used to be a separate function in drm_dma.h
+ */
switch (ctl->func) {
}
}
+/**
+ * drm_calc_timestamping_constants - Calculate and
+ * store various constants which are later needed by
+ * vblank and swap-completion timestamping, e.g, by
+ * drm_calc_vbltimestamp_from_scanoutpos().
+ * They are derived from crtc's true scanout timing,
+ * so they take things like panel scaling or other
+ * adjustments into account.
+ *
+ * @crtc drm_crtc whose timestamp constants should be updated.
+ *
+ */
+void drm_calc_timestamping_constants(struct drm_crtc *crtc)
+{
+ s64 linedur_ns = 0, pixeldur_ns = 0, framedur_ns = 0;
+ u64 dotclock;
+
+ /* Dot clock in Hz: */
+ dotclock = (u64) crtc->hwmode.clock * 1000;
+
+ /* Valid dotclock? */
+ if (dotclock > 0) {
+ /* Convert scanline length in pixels and video dot clock to
+ * line duration, frame duration and pixel duration in
+ * nanoseconds:
+ */
+ pixeldur_ns = (s64) div64_u64(1000000000, dotclock);
+ linedur_ns = (s64) div64_u64(((u64) crtc->hwmode.crtc_htotal *
+ 1000000000), dotclock);
+ framedur_ns = (s64) crtc->hwmode.crtc_vtotal * linedur_ns;
+ } else
+ DRM_ERROR("crtc %d: Can't calculate constants, dotclock = 0!\n",
+ crtc->base.id);
+
+ crtc->pixeldur_ns = pixeldur_ns;
+ crtc->linedur_ns = linedur_ns;
+ crtc->framedur_ns = framedur_ns;
+
+ DRM_DEBUG("crtc %d: hwmode: htotal %d, vtotal %d, vdisplay %d\n",
+ crtc->base.id, crtc->hwmode.crtc_htotal,
+ crtc->hwmode.crtc_vtotal, crtc->hwmode.crtc_vdisplay);
+ DRM_DEBUG("crtc %d: clock %d kHz framedur %d linedur %d, pixeldur %d\n",
+ crtc->base.id, (int) dotclock/1000, (int) framedur_ns,
+ (int) linedur_ns, (int) pixeldur_ns);
+}
+EXPORT_SYMBOL(drm_calc_timestamping_constants);
+
+/**
+ * drm_calc_vbltimestamp_from_scanoutpos - helper routine for kms
+ * drivers. Implements calculation of exact vblank timestamps from
+ * given drm_display_mode timings and current video scanout position
+ * of a crtc. This can be called from within get_vblank_timestamp()
+ * implementation of a kms driver to implement the actual timestamping.
+ *
+ * Should return timestamps conforming to the OML_sync_control OpenML
+ * extension specification. The timestamp corresponds to the end of
+ * the vblank interval, aka start of scanout of topmost-leftmost display
+ * pixel in the following video frame.
+ *
+ * Requires support for optional dev->driver->get_scanout_position()
+ * in kms driver, plus a bit of setup code to provide a drm_display_mode
+ * that corresponds to the true scanout timing.
+ *
+ * The current implementation only handles standard video modes. It
+ * returns as no operation if a doublescan or interlaced video mode is
+ * active. Higher level code is expected to handle this.
+ *
+ * @dev: DRM device.
+ * @crtc: Which crtc's vblank timestamp to retrieve.
+ * @max_error: Desired maximum allowable error in timestamps (nanosecs).
+ * On return contains true maximum error of timestamp.
+ * @vblank_time: Pointer to struct timeval which should receive the timestamp.
+ * @flags: Flags to pass to driver:
+ * 0 = Default.
+ * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
+ * @refcrtc: drm_crtc* of crtc which defines scanout timing.
+ *
+ * Returns negative value on error, failure or if not supported in current
+ * video mode:
+ *
+ * -EINVAL - Invalid crtc.
+ * -EAGAIN - Temporary unavailable, e.g., called before initial modeset.
+ * -ENOTSUPP - Function not supported in current display mode.
+ * -EIO - Failed, e.g., due to failed scanout position query.
+ *
+ * Returns or'ed positive status flags on success:
+ *
+ * DRM_VBLANKTIME_SCANOUTPOS_METHOD - Signal this method used for timestamping.
+ * DRM_VBLANKTIME_INVBL - Timestamp taken while scanout was in vblank interval.
+ *
+ */
+int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc,
+ int *max_error,
+ struct timeval *vblank_time,
+ unsigned flags,
+ struct drm_crtc *refcrtc)
+{
+ struct timeval stime, raw_time;
+ struct drm_display_mode *mode;
+ int vbl_status, vtotal, vdisplay;
+ int vpos, hpos, i;
+ s64 framedur_ns, linedur_ns, pixeldur_ns, delta_ns, duration_ns;
+ bool invbl;
+
+ if (crtc < 0 || crtc >= dev->num_crtcs) {
+ DRM_ERROR("Invalid crtc %d\n", crtc);
+ return -EINVAL;
+ }
+
+ /* Scanout position query not supported? Should not happen. */
+ if (!dev->driver->get_scanout_position) {
+ DRM_ERROR("Called from driver w/o get_scanout_position()!?\n");
+ return -EIO;
+ }
+
+ mode = &refcrtc->hwmode;
+ vtotal = mode->crtc_vtotal;
+ vdisplay = mode->crtc_vdisplay;
+
+ /* Durations of frames, lines, pixels in nanoseconds. */
+ framedur_ns = refcrtc->framedur_ns;
+ linedur_ns = refcrtc->linedur_ns;
+ pixeldur_ns = refcrtc->pixeldur_ns;
+
+ /* If mode timing undefined, just return as no-op:
+ * Happens during initial modesetting of a crtc.
+ */
+ if (vtotal <= 0 || vdisplay <= 0 || framedur_ns == 0) {
+ DRM_DEBUG("crtc %d: Noop due to uninitialized mode.\n", crtc);
+ return -EAGAIN;
+ }
+
+ /* Don't know yet how to handle interlaced or
+ * double scan modes. Just no-op for now.
+ */
+ if (mode->flags & (DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_DBLSCAN)) {
+ DRM_DEBUG("crtc %d: Noop due to unsupported mode.\n", crtc);
+ return -ENOTSUPP;
+ }
+
+ /* Get current scanout position with system timestamp.
+ * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times
+ * if single query takes longer than max_error nanoseconds.
+ *
+ * This guarantees a tight bound on maximum error if
+ * code gets preempted or delayed for some reason.
+ */
+ for (i = 0; i < DRM_TIMESTAMP_MAXRETRIES; i++) {
+ /* Disable preemption to make it very likely to
+ * succeed in the first iteration even on PREEMPT_RT kernel.
+ */
+ preempt_disable();
+
+ /* Get system timestamp before query. */
+ do_gettimeofday(&stime);
+
+ /* Get vertical and horizontal scanout pos. vpos, hpos. */
+ vbl_status = dev->driver->get_scanout_position(dev, crtc, &vpos, &hpos);
+
+ /* Get system timestamp after query. */
+ do_gettimeofday(&raw_time);
+
+ preempt_enable();
+
+ /* Return as no-op if scanout query unsupported or failed. */
+ if (!(vbl_status & DRM_SCANOUTPOS_VALID)) {
+ DRM_DEBUG("crtc %d : scanoutpos query failed [%d].\n",
+ crtc, vbl_status);
+ return -EIO;
+ }
+
+ duration_ns = timeval_to_ns(&raw_time) - timeval_to_ns(&stime);
+
+ /* Accept result with < max_error nsecs timing uncertainty. */
+ if (duration_ns <= (s64) *max_error)
+ break;
+ }
+
+ /* Noisy system timing? */
+ if (i == DRM_TIMESTAMP_MAXRETRIES) {
+ DRM_DEBUG("crtc %d: Noisy timestamp %d us > %d us [%d reps].\n",
+ crtc, (int) duration_ns/1000, *max_error/1000, i);
+ }
+
+ /* Return upper bound of timestamp precision error. */
+ *max_error = (int) duration_ns;
+
+ /* Check if in vblank area:
+ * vpos is >=0 in video scanout area, but negative
+ * within vblank area, counting down the number of lines until
+ * start of scanout.
+ */
+ invbl = vbl_status & DRM_SCANOUTPOS_INVBL;
+
+ /* Convert scanout position into elapsed time at raw_time query
+ * since start of scanout at first display scanline. delta_ns
+ * can be negative if start of scanout hasn't happened yet.
+ */
+ delta_ns = (s64) vpos * linedur_ns + (s64) hpos * pixeldur_ns;
+
+ /* Is vpos outside nominal vblank area, but less than
+ * 1/100 of a frame height away from start of vblank?
+ * If so, assume this isn't a massively delayed vblank
+ * interrupt, but a vblank interrupt that fired a few
+ * microseconds before true start of vblank. Compensate
+ * by adding a full frame duration to the final timestamp.
+ * Happens, e.g., on ATI R500, R600.
+ *
+ * We only do this if DRM_CALLED_FROM_VBLIRQ.
+ */
+ if ((flags & DRM_CALLED_FROM_VBLIRQ) && !invbl &&
+ ((vdisplay - vpos) < vtotal / 100)) {
+ delta_ns = delta_ns - framedur_ns;
+
+ /* Signal this correction as "applied". */
+ vbl_status |= 0x8;
+ }
+
+ /* Subtract time delta from raw timestamp to get final
+ * vblank_time timestamp for end of vblank.
+ */
+ *vblank_time = ns_to_timeval(timeval_to_ns(&raw_time) - delta_ns);
+
+ DRM_DEBUG("crtc %d : v %d p(%d,%d)@ %d.%d -> %d.%d [e %d us, %d rep]\n",
+ crtc, (int) vbl_status, hpos, vpos, raw_time.tv_sec,
+ raw_time.tv_usec, vblank_time->tv_sec, vblank_time->tv_usec,
+ (int) duration_ns/1000, i);
+
+ vbl_status = DRM_VBLANKTIME_SCANOUTPOS_METHOD;
+ if (invbl)
+ vbl_status |= DRM_VBLANKTIME_INVBL;
+
+ return vbl_status;
+}
+EXPORT_SYMBOL(drm_calc_vbltimestamp_from_scanoutpos);
+
+/**
+ * drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent
+ * vblank interval.
+ *
+ * @dev: DRM device
+ * @crtc: which crtc's vblank timestamp to retrieve
+ * @tvblank: Pointer to target struct timeval which should receive the timestamp
+ * @flags: Flags to pass to driver:
+ * 0 = Default.
+ * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler.
+ *
+ * Fetches the system timestamp corresponding to the time of the most recent
+ * vblank interval on specified crtc. May call into kms-driver to
+ * compute the timestamp with a high-precision GPU specific method.
+ *
+ * Returns zero if timestamp originates from uncorrected do_gettimeofday()
+ * call, i.e., it isn't very precisely locked to the true vblank.
+ *
+ * Returns non-zero if timestamp is considered to be very precise.
+ */
+u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
+ struct timeval *tvblank, unsigned flags)
+{
+ int ret = 0;
+
+ /* Define requested maximum error on timestamps (nanoseconds). */
+ int max_error = (int) drm_timestamp_precision * 1000;
+
+ /* Query driver if possible and precision timestamping enabled. */
+ if (dev->driver->get_vblank_timestamp && (max_error > 0)) {
+ ret = dev->driver->get_vblank_timestamp(dev, crtc, &max_error,
+ tvblank, flags);
+ if (ret > 0)
+ return (u32) ret;
+ }
+
+ /* GPU high precision timestamp query unsupported or failed.
+ * Return gettimeofday timestamp as best estimate.
+ */
+ do_gettimeofday(tvblank);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_get_last_vbltimestamp);
+
/**
* drm_vblank_count - retrieve "cooked" vblank counter value
* @dev: DRM device
}
EXPORT_SYMBOL(drm_vblank_count);
+/**
+ * drm_vblank_count_and_time - retrieve "cooked" vblank counter value
+ * and the system timestamp corresponding to that vblank counter value.
+ *
+ * @dev: DRM device
+ * @crtc: which counter to retrieve
+ * @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
+ *
+ * Fetches the "cooked" vblank count value that represents the number of
+ * vblank events since the system was booted, including lost events due to
+ * modesetting activity. Returns corresponding system timestamp of the time
+ * of the vblank interval that corresponds to the current value vblank counter
+ * value.
+ */
+u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
+ struct timeval *vblanktime)
+{
+ u32 cur_vblank;
+
+ /* Read timestamp from slot of _vblank_time ringbuffer
+ * that corresponds to current vblank count. Retry if
+ * count has incremented during readout. This works like
+ * a seqlock.
+ */
+ do {
+ cur_vblank = atomic_read(&dev->_vblank_count[crtc]);
+ *vblanktime = vblanktimestamp(dev, crtc, cur_vblank);
+ smp_rmb();
+ } while (cur_vblank != atomic_read(&dev->_vblank_count[crtc]));
+
+ return cur_vblank;
+}
+EXPORT_SYMBOL(drm_vblank_count_and_time);
+
/**
* drm_update_vblank_count - update the master vblank counter
* @dev: DRM device
*/
static void drm_update_vblank_count(struct drm_device *dev, int crtc)
{
- u32 cur_vblank, diff;
+ u32 cur_vblank, diff, tslot, rc;
+ struct timeval t_vblank;
/*
* Interrupts were disabled prior to this call, so deal with counter
* NOTE! It's possible we lost a full dev->max_vblank_count events
* here if the register is small or we had vblank interrupts off for
* a long time.
+ *
+ * We repeat the hardware vblank counter & timestamp query until
+ * we get consistent results. This to prevent races between gpu
+ * updating its hardware counter while we are retrieving the
+ * corresponding vblank timestamp.
*/
- cur_vblank = dev->driver->get_vblank_counter(dev, crtc);
+ do {
+ cur_vblank = dev->driver->get_vblank_counter(dev, crtc);
+ rc = drm_get_last_vbltimestamp(dev, crtc, &t_vblank, 0);
+ } while (cur_vblank != dev->driver->get_vblank_counter(dev, crtc));
+
+ /* Deal with counter wrap */
diff = cur_vblank - dev->last_vblank[crtc];
if (cur_vblank < dev->last_vblank[crtc]) {
diff += dev->max_vblank_count;
DRM_DEBUG("enabling vblank interrupts on crtc %d, missed %d\n",
crtc, diff);
+ /* Reinitialize corresponding vblank timestamp if high-precision query
+ * available. Skip this step if query unsupported or failed. Will
+ * reinitialize delayed at next vblank interrupt in that case.
+ */
+ if (rc) {
+ tslot = atomic_read(&dev->_vblank_count[crtc]) + diff;
+ vblanktimestamp(dev, crtc, tslot) = t_vblank;
+ smp_wmb();
+ }
+
atomic_add(diff, &dev->_vblank_count[crtc]);
}
*/
int drm_vblank_get(struct drm_device *dev, int crtc)
{
- unsigned long irqflags;
+ unsigned long irqflags, irqflags2;
int ret = 0;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Going from 0->1 means we have to enable interrupts again */
if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
+ /* Disable preemption while holding vblank_time_lock. Do
+ * it explicitely to guard against PREEMPT_RT kernel.
+ */
+ preempt_disable();
+ spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
if (!dev->vblank_enabled[crtc]) {
+ /* Enable vblank irqs under vblank_time_lock protection.
+ * All vblank count & timestamp updates are held off
+ * until we are done reinitializing master counter and
+ * timestamps. Filtercode in drm_handle_vblank() will
+ * prevent double-accounting of same vblank interval.
+ */
ret = dev->driver->enable_vblank(dev, crtc);
- DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n", crtc, ret);
+ DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n",
+ crtc, ret);
if (ret)
atomic_dec(&dev->vblank_refcount[crtc]);
else {
drm_update_vblank_count(dev, crtc);
}
}
+ spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
+ preempt_enable();
} else {
if (!dev->vblank_enabled[crtc]) {
atomic_dec(&dev->vblank_refcount[crtc]);
* @crtc: which counter to give up
*
* Release ownership of a given vblank counter, turning off interrupts
- * if possible.
+ * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
*/
void drm_vblank_put(struct drm_device *dev, int crtc)
{
- BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+ BUG_ON(atomic_read(&dev->vblank_refcount[crtc]) == 0);
/* Last user schedules interrupt disable */
- if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
- mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
+ if (atomic_dec_and_test(&dev->vblank_refcount[crtc]) &&
+ (drm_vblank_offdelay > 0))
+ mod_timer(&dev->vblank_disable_timer,
+ jiffies + ((drm_vblank_offdelay * DRM_HZ)/1000));
}
EXPORT_SYMBOL(drm_vblank_put);
unsigned long irqflags;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
- dev->driver->disable_vblank(dev, crtc);
+ vblank_disable_and_save(dev, crtc);
DRM_WAKEUP(&dev->vbl_queue[crtc]);
- dev->vblank_enabled[crtc] = 0;
- dev->last_vblank[crtc] = dev->driver->get_vblank_counter(dev, crtc);
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_off);
e->base.file_priv = file_priv;
e->base.destroy = (void (*) (struct drm_pending_event *)) kfree;
- do_gettimeofday(&now);
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof e->event) {
}
file_priv->event_space -= sizeof e->event;
- seq = drm_vblank_count(dev, pipe);
+ seq = drm_vblank_count_and_time(dev, pipe, &now);
+
if ((vblwait->request.type & _DRM_VBLANK_NEXTONMISS) &&
(seq - vblwait->request.sequence) <= (1 << 23)) {
vblwait->request.sequence = seq + 1;
if (ret != -EINTR) {
struct timeval now;
- do_gettimeofday(&now);
-
+ vblwait->reply.sequence = drm_vblank_count_and_time(dev, crtc, &now);
vblwait->reply.tval_sec = now.tv_sec;
vblwait->reply.tval_usec = now.tv_usec;
- vblwait->reply.sequence = drm_vblank_count(dev, crtc);
+
DRM_DEBUG("returning %d to client\n",
vblwait->reply.sequence);
} else {
unsigned long flags;
unsigned int seq;
- do_gettimeofday(&now);
- seq = drm_vblank_count(dev, crtc);
+ seq = drm_vblank_count_and_time(dev, crtc, &now);
spin_lock_irqsave(&dev->event_lock, flags);
*/
void drm_handle_vblank(struct drm_device *dev, int crtc)
{
+ u32 vblcount;
+ s64 diff_ns;
+ struct timeval tvblank;
+ unsigned long irqflags;
+
if (!dev->num_crtcs)
return;
- atomic_inc(&dev->_vblank_count[crtc]);
+ /* Need timestamp lock to prevent concurrent execution with
+ * vblank enable/disable, as this would cause inconsistent
+ * or corrupted timestamps and vblank counts.
+ */
+ spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
+
+ /* Vblank irq handling disabled. Nothing to do. */
+ if (!dev->vblank_enabled[crtc]) {
+ spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
+ return;
+ }
+
+ /* Fetch corresponding timestamp for this vblank interval from
+ * driver and store it in proper slot of timestamp ringbuffer.
+ */
+
+ /* Get current timestamp and count. */
+ vblcount = atomic_read(&dev->_vblank_count[crtc]);
+ drm_get_last_vbltimestamp(dev, crtc, &tvblank, DRM_CALLED_FROM_VBLIRQ);
+
+ /* Compute time difference to timestamp of last vblank */
+ diff_ns = timeval_to_ns(&tvblank) -
+ timeval_to_ns(&vblanktimestamp(dev, crtc, vblcount));
+
+ /* Update vblank timestamp and count if at least
+ * DRM_REDUNDANT_VBLIRQ_THRESH_NS nanoseconds
+ * difference between last stored timestamp and current
+ * timestamp. A smaller difference means basically
+ * identical timestamps. Happens if this vblank has
+ * been already processed and this is a redundant call,
+ * e.g., due to spurious vblank interrupts. We need to
+ * ignore those for accounting.
+ */
+ if (abs(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
+ /* Store new timestamp in ringbuffer. */
+ vblanktimestamp(dev, crtc, vblcount + 1) = tvblank;
+ smp_wmb();
+
+ /* Increment cooked vblank count. This also atomically commits
+ * the timestamp computed above.
+ */
+ atomic_inc(&dev->_vblank_count[crtc]);
+ } else {
+ DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n",
+ crtc, (int) diff_ns);
+ }
+
DRM_WAKEUP(&dev->vbl_queue[crtc]);
drm_handle_vblank_events(dev, crtc);
+
+ spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
}
EXPORT_SYMBOL(drm_handle_vblank);
void *driver_priv; /**< Private structure for driver to use */
};
+/* Size of ringbuffer for vblank timestamps. Just double-buffer
+ * in initial implementation.
+ */
+#define DRM_VBLANKTIME_RBSIZE 2
+
+/* Flags and return codes for get_vblank_timestamp() driver function. */
+#define DRM_CALLED_FROM_VBLIRQ 1
+#define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0)
+#define DRM_VBLANKTIME_INVBL (1 << 1)
+
+/* get_scanout_position() return flags */
+#define DRM_SCANOUTPOS_VALID (1 << 0)
+#define DRM_SCANOUTPOS_INVBL (1 << 1)
+#define DRM_SCANOUTPOS_ACCURATE (1 << 2)
+
/**
* DRM driver structure. This structure represent the common code for
* a family of cards. There will one drm_device for each card present
*/
int (*device_is_agp) (struct drm_device *dev);
+ /**
+ * Called by vblank timestamping code.
+ *
+ * Return the current display scanout position from a crtc.
+ *
+ * \param dev DRM device.
+ * \param crtc Id of the crtc to query.
+ * \param *vpos Target location for current vertical scanout position.
+ * \param *hpos Target location for current horizontal scanout position.
+ *
+ * Returns vpos as a positive number while in active scanout area.
+ * Returns vpos as a negative number inside vblank, counting the number
+ * of scanlines to go until end of vblank, e.g., -1 means "one scanline
+ * until start of active scanout / end of vblank."
+ *
+ * \return Flags, or'ed together as follows:
+ *
+ * DRM_SCANOUTPOS_VALID = Query successfull.
+ * DRM_SCANOUTPOS_INVBL = Inside vblank.
+ * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of
+ * this flag means that returned position may be offset by a constant
+ * but unknown small number of scanlines wrt. real scanout position.
+ *
+ */
+ int (*get_scanout_position) (struct drm_device *dev, int crtc,
+ int *vpos, int *hpos);
+
+ /**
+ * Called by \c drm_get_last_vbltimestamp. Should return a precise
+ * timestamp when the most recent VBLANK interval ended or will end.
+ *
+ * Specifically, the timestamp in @vblank_time should correspond as
+ * closely as possible to the time when the first video scanline of
+ * the video frame after the end of VBLANK will start scanning out,
+ * the time immmediately after end of the VBLANK interval. If the
+ * @crtc is currently inside VBLANK, this will be a time in the future.
+ * If the @crtc is currently scanning out a frame, this will be the
+ * past start time of the current scanout. This is meant to adhere
+ * to the OpenML OML_sync_control extension specification.
+ *
+ * \param dev dev DRM device handle.
+ * \param crtc crtc for which timestamp should be returned.
+ * \param *max_error Maximum allowable timestamp error in nanoseconds.
+ * Implementation should strive to provide timestamp
+ * with an error of at most *max_error nanoseconds.
+ * Returns true upper bound on error for timestamp.
+ * \param *vblank_time Target location for returned vblank timestamp.
+ * \param flags 0 = Defaults, no special treatment needed.
+ * \param DRM_CALLED_FROM_VBLIRQ = Function is called from vblank
+ * irq handler. Some drivers need to apply some workarounds
+ * for gpu-specific vblank irq quirks if flag is set.
+ *
+ * \returns
+ * Zero if timestamping isn't supported in current display mode or a
+ * negative number on failure. A positive status code on success,
+ * which describes how the vblank_time timestamp was computed.
+ */
+ int (*get_vblank_timestamp) (struct drm_device *dev, int crtc,
+ int *max_error,
+ struct timeval *vblank_time,
+ unsigned flags);
+
/* these have to be filled in */
irqreturn_t(*irq_handler) (DRM_IRQ_ARGS);
wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */
atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
+ struct timeval *_vblank_time; /**< timestamp of current vblank_count (drivers must alloc right number of fields) */
+ spinlock_t vblank_time_lock; /**< Protects vblank count and time updates during vblank enable/disable */
spinlock_t vbl_lock;
atomic_t *vblank_refcount; /* number of users of vblank interruptsper crtc */
u32 *last_vblank; /* protected by dev->vbl_lock, used */
struct drm_file *filp);
extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
+extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
+ struct timeval *vblanktime);
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
extern void drm_vblank_off(struct drm_device *dev, int crtc);
extern void drm_vblank_cleanup(struct drm_device *dev);
+extern u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
+ struct timeval *tvblank, unsigned flags);
+extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
+ int crtc, int *max_error,
+ struct timeval *vblank_time,
+ unsigned flags,
+ struct drm_crtc *refcrtc);
+extern void drm_calc_timestamping_constants(struct drm_crtc *crtc);
+
/* Modesetting support */
extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc);
extern int drm_put_minor(struct drm_minor **minor);
extern unsigned int drm_debug;
+extern unsigned int drm_vblank_offdelay;
+extern unsigned int drm_timestamp_precision;
+
extern struct class *drm_class;
extern struct proc_dir_entry *drm_proc_root;
extern struct dentry *drm_debugfs_root;
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff