[MTD] DataFlash: use proper types

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index acc3728872e3e59754dccd5058d7703b55726064..54e36bfc2c3b39caed333e3bbd5209ea704ba08c 100644 (file)
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,7 +82,7 @@
 
 
 struct dataflash {
-       u8                      command[4];
+       uint8_t                 command[4];
        char                    name[24];
 
        unsigned                partitioned:1;
@@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
        struct spi_transfer     x = { .tx_dma = 0, };
        struct spi_message      msg;
        unsigned                blocksize = priv->page_size << 3;
-       u8                      *command;
+       uint8_t                 *command;
 
        DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n",
                        spi->dev.bus_id,
@@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
                pageaddr = pageaddr << priv->page_offset;
 
                command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
-               command[1] = (u8)(pageaddr >> 16);
-               command[2] = (u8)(pageaddr >> 8);
+               command[1] = (uint8_t)(pageaddr >> 16);
+               command[2] = (uint8_t)(pageaddr >> 8);
                command[3] = 0;
 
                DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
@@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
        struct spi_transfer     x[2] = { { .tx_dma = 0, }, };
        struct spi_message      msg;
        unsigned int            addr;
-       u8                      *command;
+       uint8_t                 *command;
        int                     status;
 
        DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
@@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
         * fewer "don't care" bytes.  Both buffers stay unchanged.
         */
        command[0] = OP_READ_CONTINUOUS;
-       command[1] = (u8)(addr >> 16);
-       command[2] = (u8)(addr >> 8);
-       command[3] = (u8)(addr >> 0);
+       command[1] = (uint8_t)(addr >> 16);
+       command[2] = (uint8_t)(addr >> 8);
+       command[3] = (uint8_t)(addr >> 0);
        /* plus 4 "don't care" bytes */
 
        status = spi_sync(priv->spi, &msg);
@@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
        size_t                  remaining = len;
        u_char                  *writebuf = (u_char *) buf;
        int                     status = -EINVAL;
-       u8                      *command;
+       uint8_t                 *command;
 
        DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
                spi->dev.bus_id, (unsigned)to, (unsigned)(to + len));
@@ -539,16 +539,16 @@ struct flash_info {
         * a high byte of zero plus three data bytes: the manufacturer id,
         * then a two byte device id.
         */
-       u32             jedec_id;
+       uint32_t        jedec_id;
 
        /* The size listed here is what works with OPCODE_SE, which isn't
         * necessarily called a "sector" by the vendor.
         */
        unsigned        nr_pages;
-       u16             pagesize;
-       u16             pageoffset;
+       uint16_t        pagesize;
+       uint16_t        pageoffset;
 
-       u16             flags;
+       uint16_t        flags;
 #define        SUP_POW2PS      0x02
 #define        IS_POW2PS       0x01
 };
@@ -582,9 +582,9 @@ static struct flash_info __devinitdata dataflash_data [] = {
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 {
        int                     tmp;
-       u8                      code = OP_READ_ID;
-       u8                      id[3];
-       u32                     jedec;
+       uint8_t                 code = OP_READ_ID;
+       uint8_t                 id[3];
+       uint32_t                jedec;
        struct flash_info       *info;
        int status;