hw_entry->start, hw_entry->end);
}
- /* cursor */
- hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
- sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
-
- if (!skl_ddb_entry_equal(hw_entry, sw_entry)) {
- DRM_ERROR("mismatch in DDB state pipe %c cursor "
- "(expected (%u,%u), found (%u,%u))\n",
- pipe_name(pipe),
- sw_entry->start, sw_entry->end,
- hw_entry->start, hw_entry->end);
+ /*
+ * cursor
+ * If the cursor plane isn't active, we may not have updated it's ddb
+ * allocation. In that case since the ddb allocation will be updated
+ * once the plane becomes visible, we can skip this check
+ */
+ if (intel_crtc->cursor_addr) {
+ hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
+ sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
+
+ if (!skl_ddb_entry_equal(hw_entry, sw_entry)) {
+ DRM_ERROR("mismatch in DDB state pipe %c cursor "
+ "(expected (%u,%u), found (%u,%u))\n",
+ pipe_name(pipe),
+ sw_entry->start, sw_entry->end,
+ hw_entry->start, hw_entry->end);
+ }
}
}
}
}
+static void skl_update_crtcs(struct drm_atomic_state *state,
+ unsigned int *crtc_vblank_mask)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *old_crtc_state;
+ struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
+ struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb;
+ unsigned int updated = 0;
+ bool progress;
+ enum pipe pipe;
+
+ /*
+ * Whenever the number of active pipes changes, we need to make sure we
+ * update the pipes in the right order so that their ddb allocations
+ * never overlap with eachother inbetween CRTC updates. Otherwise we'll
+ * cause pipe underruns and other bad stuff.
+ */
+ do {
+ int i;
+ progress = false;
+
+ for_each_crtc_in_state(state, crtc, old_crtc_state, i) {
+ bool vbl_wait = false;
+ unsigned int cmask = drm_crtc_mask(crtc);
+ pipe = to_intel_crtc(crtc)->pipe;
+
+ if (updated & cmask || !crtc->state->active)
+ continue;
+ if (skl_ddb_allocation_overlaps(state, cur_ddb, new_ddb,
+ pipe))
+ continue;
+
+ updated |= cmask;
+
+ /*
+ * If this is an already active pipe, it's DDB changed,
+ * and this isn't the last pipe that needs updating
+ * then we need to wait for a vblank to pass for the
+ * new ddb allocation to take effect.
+ */
+ if (!skl_ddb_allocation_equals(cur_ddb, new_ddb, pipe) &&
+ !crtc->state->active_changed &&
+ intel_state->wm_results.dirty_pipes != updated)
+ vbl_wait = true;
+
+ intel_update_crtc(crtc, state, old_crtc_state,
+ crtc_vblank_mask);
+
+ if (vbl_wait)
+ intel_wait_for_vblank(dev, pipe);
+
+ progress = true;
+ }
+ } while (progress);
+}
+
static void intel_atomic_commit_tail(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
}
- dev_priv->display.update_crtcs = intel_update_crtcs;
-
/* Returns the core display clock speed */
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
dev_priv->display.get_display_clock_speed =
skl_modeset_calc_cdclk;
}
+ if (dev_priv->info.gen >= 9)
+ dev_priv->display.update_crtcs = skl_update_crtcs;
+ else
+ dev_priv->display.update_crtcs = intel_update_crtcs;
+
switch (INTEL_INFO(dev_priv)->gen) {
case 2:
dev_priv->display.queue_flip = intel_gen2_queue_flip;
wm->plane[pipe][plane][level]);
}
I915_WRITE(PLANE_WM_TRANS(pipe, plane), wm->plane_trans[pipe][plane]);
+
+ skl_ddb_entry_write(dev_priv, PLANE_BUF_CFG(pipe, plane),
+ &wm->ddb.plane[pipe][plane]);
+ skl_ddb_entry_write(dev_priv, PLANE_NV12_BUF_CFG(pipe, plane),
+ &wm->ddb.y_plane[pipe][plane]);
}
void skl_write_cursor_wm(struct intel_crtc *intel_crtc,
wm->plane[pipe][PLANE_CURSOR][level]);
}
I915_WRITE(CUR_WM_TRANS(pipe), wm->plane_trans[pipe][PLANE_CURSOR]);
-}
-
-static void skl_write_wm_values(struct drm_i915_private *dev_priv,
- const struct skl_wm_values *new)
-{
- struct drm_device *dev = &dev_priv->drm;
- struct intel_crtc *crtc;
-
- for_each_intel_crtc(dev, crtc) {
- int i;
- enum pipe pipe = crtc->pipe;
-
- if ((new->dirty_pipes & drm_crtc_mask(&crtc->base)) == 0)
- continue;
- if (!crtc->active)
- continue;
-
- for (i = 0; i < intel_num_planes(crtc); i++) {
- skl_ddb_entry_write(dev_priv,
- PLANE_BUF_CFG(pipe, i),
- &new->ddb.plane[pipe][i]);
- skl_ddb_entry_write(dev_priv,
- PLANE_NV12_BUF_CFG(pipe, i),
- &new->ddb.y_plane[pipe][i]);
- }
- skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
- &new->ddb.plane[pipe][PLANE_CURSOR]);
- }
+ skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
+ &wm->ddb.plane[pipe][PLANE_CURSOR]);
}
-/*
- * When setting up a new DDB allocation arrangement, we need to correctly
- * sequence the times at which the new allocations for the pipes are taken into
- * account or we'll have pipes fetching from space previously allocated to
- * another pipe.
- *
- * Roughly the sequence looks like:
- * 1. re-allocate the pipe(s) with the allocation being reduced and not
- * overlapping with a previous light-up pipe (another way to put it is:
- * pipes with their new allocation strickly included into their old ones).
- * 2. re-allocate the other pipes that get their allocation reduced
- * 3. allocate the pipes having their allocation increased
- *
- * Steps 1. and 2. are here to take care of the following case:
- * - Initially DDB looks like this:
- * | B | C |
- * - enable pipe A.
- * - pipe B has a reduced DDB allocation that overlaps with the old pipe C
- * allocation
- * | A | B | C |
- *
- * We need to sequence the re-allocation: C, B, A (and not B, C, A).
- */
-
-static void
-skl_wm_flush_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, int pass)
+bool skl_ddb_allocation_equals(const struct skl_ddb_allocation *old,
+ const struct skl_ddb_allocation *new,
+ enum pipe pipe)
{
- int plane;
-
- DRM_DEBUG_KMS("flush pipe %c (pass %d)\n", pipe_name(pipe), pass);
-
- for_each_plane(dev_priv, pipe, plane) {
- I915_WRITE(PLANE_SURF(pipe, plane),
- I915_READ(PLANE_SURF(pipe, plane)));
- }
- I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+ return new->pipe[pipe].start == old->pipe[pipe].start &&
+ new->pipe[pipe].end == old->pipe[pipe].end;
}
-static bool
-skl_ddb_allocation_included(const struct skl_ddb_allocation *old,
- const struct skl_ddb_allocation *new,
- enum pipe pipe)
+static inline bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
+ const struct skl_ddb_entry *b)
{
- uint16_t old_size, new_size;
-
- old_size = skl_ddb_entry_size(&old->pipe[pipe]);
- new_size = skl_ddb_entry_size(&new->pipe[pipe]);
-
- return old_size != new_size &&
- new->pipe[pipe].start >= old->pipe[pipe].start &&
- new->pipe[pipe].end <= old->pipe[pipe].end;
+ return a->start < b->end && b->start < a->end;
}
-static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
- struct skl_wm_values *new_values)
+bool skl_ddb_allocation_overlaps(struct drm_atomic_state *state,
+ const struct skl_ddb_allocation *old,
+ const struct skl_ddb_allocation *new,
+ enum pipe pipe)
{
- struct drm_device *dev = &dev_priv->drm;
- struct skl_ddb_allocation *cur_ddb, *new_ddb;
- bool reallocated[I915_MAX_PIPES] = {};
- struct intel_crtc *crtc;
- enum pipe pipe;
-
- new_ddb = &new_values->ddb;
- cur_ddb = &dev_priv->wm.skl_hw.ddb;
-
- /*
- * First pass: flush the pipes with the new allocation contained into
- * the old space.
- *
- * We'll wait for the vblank on those pipes to ensure we can safely
- * re-allocate the freed space without this pipe fetching from it.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- pipe = crtc->pipe;
-
- if (!skl_ddb_allocation_included(cur_ddb, new_ddb, pipe))
- continue;
-
- skl_wm_flush_pipe(dev_priv, pipe, 1);
- intel_wait_for_vblank(dev, pipe);
-
- reallocated[pipe] = true;
- }
-
-
- /*
- * Second pass: flush the pipes that are having their allocation
- * reduced, but overlapping with a previous allocation.
- *
- * Here as well we need to wait for the vblank to make sure the freed
- * space is not used anymore.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
+ struct drm_device *dev = state->dev;
+ struct intel_crtc *intel_crtc;
+ enum pipe otherp;
- pipe = crtc->pipe;
+ for_each_intel_crtc(dev, intel_crtc) {
+ otherp = intel_crtc->pipe;
- if (reallocated[pipe])
+ if (otherp == pipe)
continue;
- if (skl_ddb_entry_size(&new_ddb->pipe[pipe]) <
- skl_ddb_entry_size(&cur_ddb->pipe[pipe])) {
- skl_wm_flush_pipe(dev_priv, pipe, 2);
- intel_wait_for_vblank(dev, pipe);
- reallocated[pipe] = true;
- }
+ if (skl_ddb_entries_overlap(&new->pipe[pipe],
+ &old->pipe[otherp]))
+ return true;
}
- /*
- * Third pass: flush the pipes that got more space allocated.
- *
- * We don't need to actively wait for the update here, next vblank
- * will just get more DDB space with the correct WM values.
- */
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- pipe = crtc->pipe;
-
- /*
- * At this point, only the pipes more space than before are
- * left to re-allocate.
- */
- if (reallocated[pipe])
- continue;
-
- skl_wm_flush_pipe(dev_priv, pipe, 3);
- }
+ return false;
}
static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
- int pipe;
+ enum pipe pipe = intel_crtc->pipe;
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
return;
mutex_lock(&dev_priv->wm.wm_mutex);
- skl_write_wm_values(dev_priv, results);
- skl_flush_wm_values(dev_priv, results);
-
/*
- * Store the new configuration (but only for the pipes that have
- * changed; the other values weren't recomputed).
+ * If this pipe isn't active already, we're going to be enabling it
+ * very soon. Since it's safe to update a pipe's ddb allocation while
+ * the pipe's shut off, just do so here. Already active pipes will have
+ * their watermarks updated once we update their planes.
*/
- for_each_pipe_masked(dev_priv, pipe, results->dirty_pipes)
- skl_copy_wm_for_pipe(hw_vals, results, pipe);
+ if (crtc->state->active_changed) {
+ int plane;
+
+ for (plane = 0; plane < intel_num_planes(intel_crtc); plane++)
+ skl_write_plane_wm(intel_crtc, results, plane);
+
+ skl_write_cursor_wm(intel_crtc, results);
+ }
+
+ skl_copy_wm_for_pipe(hw_vals, results, pipe);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff