[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
authorDavid Anders <danders@amltd.com>
Tue, 26 Sep 2006 16:46:00 +0000 (17:46 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Wed, 27 Sep 2006 22:44:33 +0000 (23:44 +0100)
this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-s3c2410/Kconfig
arch/arm/mach-s3c2410/mach-amlm5900.c
arch/arm/mach-s3c2410/pm-simtec.c
arch/arm/mach-s3c2410/s3c2410-pm.c

index e50a73f93d3d238e22d7dead52bc7766f6154f5e..df37594c30f83baef8a80d54b218ed56c83e4929 100644 (file)
@@ -292,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 
 config PM_SIMTEC
        bool
-       depends on PM && (ARCH_BAST || MACH_VR1000)
+       depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
        default y
 
 config S3C2410_LOWLEVEL_UART_PORT
index 0c9b7dafbe90495a83b668ed39475b1598b48d89..ba5109af40b4d407fbccd0d5f6c99b8e9ccea752 100644 (file)
@@ -225,13 +225,34 @@ static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = {
 };
 #endif
 
-static void __init amlm5900_init(void)
+static irqreturn_t
+amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
 {
+       return IRQ_HANDLED;
+}
 
+static void amlm5900_init_pm(void)
+{
+       int ret = 0;
+
+       ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
+                               IRQF_TRIGGER_RISING | IRQF_SHARED,
+                               "amlm5900_wakeup", &amlm5900_wake_interrupt);
+       if (ret != 0) {
+               printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
+       } else {
+               enable_irq_wake(IRQ_EINT9);
+               /* configure the suspend/resume status pin */
+               s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
+               s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+       }
+}
+static void __init amlm5900_init(void)
+{
+       amlm5900_init_pm();
 #ifdef CONFIG_FB_S3C2410
        s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
 #endif
-
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
index 7b244566a436891d6f2b9f32cf848f1f222a0627..42cd05e298f8dc5765e495712558f271ef4aa91d 100644 (file)
@@ -49,7 +49,8 @@ static __init int pm_simtec_init(void)
        /* check which machine we are running on */
 
        if (!machine_is_bast() && !machine_is_vr1000() &&
-           !machine_is_anubis() && !machine_is_osiris())
+           !machine_is_anubis() && !machine_is_osiris() &&
+           !machine_is_aml_m5900())
                return 0;
 
        printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
index 3080d25a12de627aa1835f0ed9105d758b4a6a5c..e51d76669512ced432e3df2bf5f5147cfbdaa702 100644 (file)
@@ -29,6 +29,8 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 
+#include <asm/mach-types.h>
+
 #include <asm/arch/regs-gpio.h>
 
 #include "cpu.h"
@@ -49,6 +51,10 @@ static void s3c2410_pm_prepare(void)
 
        DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
        DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+       if ( machine_is_aml_m5900() )
+               s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+
 }
 
 int s3c2410_pm_resume(struct sys_device *dev)
@@ -61,6 +67,9 @@ int s3c2410_pm_resume(struct sys_device *dev)
        tmp &= S3C2410_GSTATUS2_OFFRESET;
        __raw_writel(tmp, S3C2410_GSTATUS2);
 
+       if ( machine_is_aml_m5900() )
+               s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+
        return 0;
 }