The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere. This patch, therefore, merges both headers. Notable
points:
- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64. These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf. These too should be merged and consolidated later.
- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32. In the merged version it's in
cacheflush.h
- On ppc32 flush_icache_range() is a normal function from
misc.S. On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush. This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported). Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.
Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).
Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted
on G5 (ARCH=powerpc)
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
*
* flush_icache_range(unsigned long start, unsigned long stop)
*/
-_GLOBAL(flush_icache_range)
+_GLOBAL(__flush_icache_range)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
sync /* wait for dcbi's to get to ram */
blr
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS 64
-#define CACHE_NLINES 16
-
-_GLOBAL(flush_dcache_all)
- li r4, (2 * CACHE_NWAYS * CACHE_NLINES)
- mtctr r4
- lis r5, KERNELBASE@h
-1: lwz r3, 0(r5) /* Load one word from every line */
- addi r5, r5, L1_CACHE_BYTES
- bdnz 1b
- blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* and invalidate the corresponding instruction cache blocks.
* This is a no-op on the 601.
*
- * flush_icache_range(unsigned long start, unsigned long stop)
+ * __flush_icache_range(unsigned long start, unsigned long stop)
*/
-_GLOBAL(flush_icache_range)
+_GLOBAL(__flush_icache_range)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
#endif /* CONFIG_PCI */
#ifdef CONFIG_NOT_COHERENT_CACHE
+extern void flush_dcache_all(void);
EXPORT_SYMBOL(flush_dcache_all);
#endif
#include <asm/pci-bridge.h>
#include <asm/todc.h>
+/* prep registers for L2 */
+#define CACHECRBA 0x80000823 /* Cache configuration register address */
+#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB 0x00 /* 512KB */
+#define L2CACHE_256KB 0x01 /* 256KB */
+#define L2CACHE_1MB 0x02 /* 1MB */
+#define L2CACHE_NONE 0x03 /* NONE */
+#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
+
TODC_ALLOC();
unsigned char ucSystemType;
--- /dev/null
+#ifndef _ASM_POWERPC_CACHE_H
+#define _ASM_POWERPC_CACHE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_SHIFT 4
+#define MAX_COPY_PREFETCH 1
+#elif defined(CONFIG_PPC32)
+#define L1_CACHE_SHIFT 5
+#define MAX_COPY_PREFETCH 4
+#else /* CONFIG_PPC64 */
+#define L1_CACHE_SHIFT 7
+#endif
+
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
+
+#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
+struct ppc64_caches {
+ u32 dsize; /* L1 d-cache size */
+ u32 dline_size; /* L1 d-cache line size */
+ u32 log_dline_size;
+ u32 dlines_per_page;
+ u32 isize; /* L1 i-cache size */
+ u32 iline_size; /* L1 i-cache line size */
+ u32 log_iline_size;
+ u32 ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CACHE_H */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_CACHEFLUSH_H
+#define _ASM_POWERPC_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are changed,
+ * because the caches on PowerPCs are physically addressed.
+ */
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_icache_page(vma, page) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ __flush_icache_range(start, stop);
+}
+
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+ struct page *page, unsigned long addr,
+ int len);
+extern void __flush_dcache_icache(void *page_va);
+extern void flush_dcache_icache_page(struct page *page);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CONFIG_PPC32
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#endif /* CONFIG_PPC32 */
+#ifdef CONFIG_PPC64
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+#endif
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ flush_icache_user_range(vma, page, vaddr, len); \
+ } while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_CACHEFLUSH_H */
/* Pickup Book E specific registers. */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include <asm/reg_booke.h>
-#endif
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_8xx */
#define MSR_SF_LG 63 /* Enable 64 bit mode */
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
--- /dev/null
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs. Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST 560 /* Instruction cache control/status */
+#define SPRN_IC_ADR 561 /* Address needed for some commands */
+#define SPRN_IC_DAT 562 /* Read-only data register */
+#define SPRN_DC_CST 568 /* Data cache control/status */
+#define SPRN_DC_ADR 569 /* Address needed for some commands */
+#define SPRN_DC_DAT 570 /* Read-only data register */
+
+/* Commands. Only the first few are available to the instruction cache.
+*/
+#define IDC_ENABLE 0x02000000 /* Cache enable */
+#define IDC_DISABLE 0x04000000 /* Cache disable */
+#define IDC_LDLCK 0x06000000 /* Load and lock */
+#define IDC_UNLINE 0x08000000 /* Unlock line */
+#define IDC_UNALL 0x0a000000 /* Unlock all */
+#define IDC_INVALL 0x0c000000 /* Invalidate all */
+
+#define DC_FLINE 0x0e000000 /* Flush data cache line */
+#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
+#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
+#define DC_SLES 0x05000000 /* Set little endian swap mode */
+#define DC_CLES 0x07000000 /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED 0x80000000 /* Cache is enabled */
+#define IDC_CERR1 0x00200000 /* Cache error 1 */
+#define IDC_CERR2 0x00100000 /* Cache error 2 */
+#define IDC_CERR3 0x00080000 /* Cache error 3 */
+
+#define DC_DFWT 0x40000000 /* Data cache is forced write through */
+#define DC_LES 0x20000000 /* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */
+++ /dev/null
-/*
- * include/asm-ppc/cache.h
- */
-#ifdef __KERNEL__
-#ifndef __ARCH_PPC_CACHE_H
-#define __ARCH_PPC_CACHE_H
-
-#include <linux/config.h>
-
-/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
-#define L1_CACHE_SHIFT 4
-#define MAX_COPY_PREFETCH 1
-#elif defined(CONFIG_PPC64BRIDGE)
-#define L1_CACHE_SHIFT 7
-#define MAX_COPY_PREFETCH 1
-#else
-#define L1_CACHE_SHIFT 5
-#define MAX_COPY_PREFETCH 4
-#endif
-
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
-
-#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
-#define L1_CACHE_PAGES 8
-
-#ifndef __ASSEMBLY__
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache_all(void);
-#endif /* __ASSEMBLY__ */
-
-/* prep registers for L2 */
-#define CACHECRBA 0x80000823 /* Cache configuration register address */
-#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */
-#define L2CACHE_512KB 0x00 /* 512KB */
-#define L2CACHE_256KB 0x01 /* 256KB */
-#define L2CACHE_1MB 0x02 /* 1MB */
-#define L2CACHE_NONE 0x03 /* NONE */
-#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
-
-#ifdef CONFIG_8xx
-/* Cache control on the MPC8xx is provided through some additional
- * special purpose registers.
- */
-#define SPRN_IC_CST 560 /* Instruction cache control/status */
-#define SPRN_IC_ADR 561 /* Address needed for some commands */
-#define SPRN_IC_DAT 562 /* Read-only data register */
-#define SPRN_DC_CST 568 /* Data cache control/status */
-#define SPRN_DC_ADR 569 /* Address needed for some commands */
-#define SPRN_DC_DAT 570 /* Read-only data register */
-
-/* Commands. Only the first few are available to the instruction cache.
-*/
-#define IDC_ENABLE 0x02000000 /* Cache enable */
-#define IDC_DISABLE 0x04000000 /* Cache disable */
-#define IDC_LDLCK 0x06000000 /* Load and lock */
-#define IDC_UNLINE 0x08000000 /* Unlock line */
-#define IDC_UNALL 0x0a000000 /* Unlock all */
-#define IDC_INVALL 0x0c000000 /* Invalidate all */
-
-#define DC_FLINE 0x0e000000 /* Flush data cache line */
-#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
-#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
-#define DC_SLES 0x05000000 /* Set little endian swap mode */
-#define DC_CLES 0x07000000 /* Clear little endian swap mode */
-
-/* Status.
-*/
-#define IDC_ENABLED 0x80000000 /* Cache is enabled */
-#define IDC_CERR1 0x00200000 /* Cache error 1 */
-#define IDC_CERR2 0x00100000 /* Cache error 2 */
-#define IDC_CERR3 0x00080000 /* Cache error 3 */
-
-#define DC_DFWT 0x40000000 /* Data cache is forced write through */
-#define DC_LES 0x20000000 /* Caches are little endian mode */
-#endif /* CONFIG_8xx */
-
-#endif
-#endif /* __KERNEL__ */
+++ /dev/null
-/*
- * include/asm-ppc/cacheflush.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifdef __KERNEL__
-#ifndef _PPC_CACHEFLUSH_H
-#define _PPC_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-/*
- * No cache flushing is required when address mappings are
- * changed, because the caches on PowerPCs are physically
- * addressed. -- paulus
- * Also, when SMP we use the coherency (M) bit of the
- * BATs and PTEs. -- Cort
- */
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_range(vma, a, b) do { } while (0)
-#define flush_cache_page(vma, p, pfn) do { } while (0)
-#define flush_icache_page(vma, page) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-extern void flush_dcache_page(struct page *page);
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-extern void flush_icache_range(unsigned long, unsigned long);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
- struct page *page, unsigned long addr, int len);
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
- flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-extern void __flush_dcache_icache(void *page_va);
-extern void __flush_dcache_icache_phys(unsigned long physaddr);
-extern void flush_dcache_icache_page(struct page *page);
-#endif /* _PPC_CACHEFLUSH_H */
-#endif /* __KERNEL__ */
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __ARCH_PPC64_CACHE_H
-#define __ARCH_PPC64_CACHE_H
-
-#include <asm/types.h>
-
-/* bytes per L1 cache line */
-#define L1_CACHE_SHIFT 7
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */
-
-#ifndef __ASSEMBLY__
-
-struct ppc64_caches {
- u32 dsize; /* L1 d-cache size */
- u32 dline_size; /* L1 d-cache line size */
- u32 log_dline_size;
- u32 dlines_per_page;
- u32 isize; /* L1 i-cache size */
- u32 iline_size; /* L1 i-cache line size */
- u32 log_iline_size;
- u32 ilines_per_page;
-};
-
-extern struct ppc64_caches ppc64_caches;
-
-#endif
-
-#endif
+++ /dev/null
-#ifndef _PPC64_CACHEFLUSH_H
-#define _PPC64_CACHEFLUSH_H
-
-#include <linux/mm.h>
-#include <asm/cputable.h>
-
-/*
- * No cache flushing is required when address mappings are
- * changed, because the caches on PowerPCs are physically
- * addressed.
- */
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_icache_page(vma, page) do { } while (0)
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-extern void flush_dcache_page(struct page *page);
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-extern void __flush_icache_range(unsigned long, unsigned long);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
- struct page *page, unsigned long addr,
- int len);
-
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
-extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
- flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-extern void __flush_dcache_icache(void *page_va);
-
-static inline void flush_icache_range(unsigned long start, unsigned long stop)
-{
- if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
- __flush_icache_range(start, stop);
-}
-
-#endif /* _PPC64_CACHEFLUSH_H */
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff