staging: et131x: Remove et131x_check_mii() and move functionality into et131x_adjust_...
authorMark Einon <mark.einon@gmail.com>
Sun, 25 Sep 2011 18:17:54 +0000 (19:17 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 27 Sep 2011 00:39:15 +0000 (17:39 -0700)
et131x_check_mii() is now only being called from et131x_adjust_link.
Removed this call and associated subroutines, putting the functionality directly into et131x_adjust_link(), in preparation for further simplification.
Changed register checks from bare BMSR checks to use phydev/netif versions, also now uses adapter->link to track link state changes.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/et131x/et1310_phy.c
drivers/staging/et131x/et131x_initpci.c

index c4bc41dd185bd6db22189d745c67ff9111f59ab5..fc37b1857370d504b9ad27057d59888cfea3d46a 100644 (file)
@@ -298,68 +298,6 @@ void et1310_phy_power_down(struct et131x_adapter *adapter, bool down)
        et131x_mii_write(adapter, MII_BMCR, data);
 }
 
-/**
- *     et1310_phy_link_status  -       read link state
- *     @adapter: device to read
- *     @link_status: reported link state
- *     @autoneg: reported autonegotiation state (complete/incomplete/disabled)
- *     @linkspeed: returnedlink speed in use
- *     @duplex_mode: reported half/full duplex state
- *     @mdi_mdix: not yet working
- *     @masterslave: report whether we are master or slave
- *     @polarity: link polarity
- *
- *     I can read your lan like a magazine
- *     I see if your up
- *     I know your link speed
- *     I see all the setting that you'd rather keep
- */
-static void et1310_phy_link_status(struct et131x_adapter *adapter,
-                         u8 *link_status,
-                         u32 *autoneg,
-                         u32 *linkspeed,
-                         u32 *duplex_mode,
-                         u32 *mdi_mdix,
-                         u32 *masterslave, u32 *polarity)
-{
-       u16 mistatus = 0;
-       u16 is1000BaseT = 0;
-       u16 vmi_phystatus = 0;
-       u16 control = 0;
-
-       et131x_mii_read(adapter, MII_BMSR, &mistatus);
-       et131x_mii_read(adapter, MII_STAT1000, &is1000BaseT);
-       et131x_mii_read(adapter, PHY_PHY_STATUS, &vmi_phystatus);
-       et131x_mii_read(adapter, MII_BMCR, &control);
-
-       *link_status = (vmi_phystatus & ET_PHY_LSTATUS) ? 1 : 0;
-       *autoneg = (control & ET_PHY_AUTONEG_STATUS) ?
-                       ((vmi_phystatus & ET_PHY_AUTONEG_ENABLE) ?
-                                           TRUEPHY_ANEG_COMPLETE :
-                                           TRUEPHY_ANEG_NOT_COMPLETE) :
-                                                       TRUEPHY_ANEG_DISABLED;
-       *linkspeed = (vmi_phystatus & ET_PHY_SPEED_STATUS) >> 8;
-       *duplex_mode = (vmi_phystatus & ET_PHY_DUPLEX_STATUS) >> 7;
-       /* NOTE: Need to complete this */
-       *mdi_mdix = 0;
-
-       *masterslave = (is1000BaseT & ET_1000BT_MSTR_SLV) ?
-                       TRUEPHY_CFG_MASTER : TRUEPHY_CFG_SLAVE;
-       *polarity = (vmi_phystatus & ET_PHY_POLARITY_STATUS) ?
-                       TRUEPHY_POLARITY_INVERTED : TRUEPHY_POLARITY_NORMAL;
-}
-
-static void et1310_phy_and_or_reg(struct et131x_adapter *adapter,
-                                 u16 regnum, u16 and_mask, u16 or_mask)
-{
-       u16 reg;
-
-       et131x_mii_read(adapter, regnum, &reg);
-       reg &= and_mask;
-       reg |= or_mask;
-       et131x_mii_write(adapter, regnum, reg);
-}
-
 /* Still used from _mac for BIT_READ */
 void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, u16 action,
                               u16 regnum, u16 bitnum, u8 *value)
@@ -437,108 +375,3 @@ void et131x_xcvr_init(struct et131x_adapter *adapter)
        }
 }
 
-void et131x_mii_check(struct et131x_adapter *adapter,
-                     u16 bmsr, u16 bmsr_ints)
-{
-       struct phy_device *phydev = adapter->phydev;
-       u8 link_status;
-       u32 autoneg_status;
-       u32 speed;
-       u32 duplex;
-       u32 mdi_mdix;
-       u32 masterslave;
-       u32 polarity;
-
-       if (bmsr_ints & BMSR_LSTATUS) {
-               if (bmsr & BMSR_LSTATUS) {
-                       adapter->boot_coma = 20;
-               } else {
-                       dev_warn(&adapter->pdev->dev,
-                           "Link down - cable problem ?\n");
-
-                       if (phydev && phydev->speed == SPEED_10) {
-                               /* NOTE - Is there a way to query this without
-                                * TruePHY?
-                                * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
-                                * EMI_TRUEPHY_A13O) {
-                                */
-                               u16 register18;
-
-                               et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
-                                                &register18);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18 | 0x4);
-                               et131x_mii_write(adapter, PHY_INDEX_REG,
-                                                register18 | 0x8402);
-                               et131x_mii_write(adapter, PHY_DATA_REG,
-                                                register18 | 511);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18);
-                       }
-
-                       /* Free the packets being actively sent & stopped */
-                       et131x_free_busy_send_packets(adapter);
-
-                       /* Re-initialize the send structures */
-                       et131x_init_send(adapter);
-
-                       /* Reset the RFD list and re-start RU */
-                       et131x_reset_recv(adapter);
-
-                       /*
-                        * Bring the device back to the state it was during
-                        * init prior to autonegotiation being complete. This
-                        * way, when we get the auto-neg complete interrupt,
-                        * we can complete init by calling config_mac_regs2.
-                        */
-                       et131x_soft_reset(adapter);
-
-                       /* Setup ET1310 as per the documentation */
-                       et131x_adapter_setup(adapter);
-               }
-       }
-
-       if (bmsr_ints & BMSR_ANEGCOMPLETE) {
-               if (bmsr & BMSR_ANEGCOMPLETE) {
-                       et1310_phy_link_status(adapter,
-                                            &link_status, &autoneg_status,
-                                            &speed, &duplex, &mdi_mdix,
-                                            &masterslave, &polarity);
-
-                       adapter->boot_coma = 20;
-
-                       if (phydev && phydev->speed == SPEED_10) {
-                               /*
-                                * NOTE - Is there a way to query this without
-                                * TruePHY?
-                                * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
-                                * EMI_TRUEPHY_A13O) {
-                                */
-                               u16 register18;
-
-                               et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
-                                                &register18);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18 | 0x4);
-                               et131x_mii_write(adapter, PHY_INDEX_REG,
-                                                register18 | 0x8402);
-                               et131x_mii_write(adapter, PHY_DATA_REG,
-                                                register18 | 511);
-                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
-                                                register18);
-                       }
-
-                       et1310_config_flow_control(adapter);
-
-                       if (phydev && phydev->speed == SPEED_1000 &&
-                                       adapter->registry_jumbo_packet > 2048)
-                               et1310_phy_and_or_reg(adapter, PHY_CONFIG,
-                                               ~ET_PHY_CONFIG_TX_FIFO_DEPTH,
-                                               ET_PHY_CONFIG_FIFO_DEPTH_32);
-
-                       et131x_set_rx_dma_timer(adapter);
-                       et1310_config_mac_regs2(adapter);
-               }
-       }
-}
-
index 799aad6854797bae8bfb8352a929c8c44cac88fe..618f84428a0e7940b18e03314d87343ed81594c1 100644 (file)
@@ -446,29 +446,110 @@ static void et131x_adjust_link(struct net_device *netdev)
        struct address_map __iomem *iomem = adapter->regs;
 
        u32 pm_csr;
-       u16 bmsr_ints;
-       u16 bmsr_data;
 
-       /* If we are in coma mode, we need to disable it. */
-       pm_csr = readl(&iomem->global.pm_csr);
-       if (pm_csr & ET_PM_PHY_SW_COMA) {
-               /*
-                * Check to see if we are in coma mode and if
-                * so, disable it because we will not be able
-                * to read PHY values until we are out.
-                */
-               et1310_disable_phy_coma(adapter);
+       if (netif_carrier_ok(netdev)) {
+               adapter->boot_coma = 20;
+
+               if (phydev && phydev->speed == SPEED_10) {
+                       /*
+                        * NOTE - Is there a way to query this without
+                        * TruePHY?
+                        * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
+                        * EMI_TRUEPHY_A13O) {
+                        */
+                       u16 register18;
+
+                       et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
+                                        &register18);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18 | 0x4);
+                       et131x_mii_write(adapter, PHY_INDEX_REG,
+                                        register18 | 0x8402);
+                       et131x_mii_write(adapter, PHY_DATA_REG,
+                                        register18 | 511);
+                       et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                        register18);
+               }
+
+               et1310_config_flow_control(adapter);
+
+               if (phydev && phydev->speed == SPEED_1000 &&
+                               adapter->registry_jumbo_packet > 2048) {
+                       u16 reg;
+
+                       et131x_mii_read(adapter, PHY_CONFIG, &reg);
+                       reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
+                       reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
+                       et131x_mii_write(adapter, PHY_CONFIG, reg);
+               }
+
+               et131x_set_rx_dma_timer(adapter);
+               et1310_config_mac_regs2(adapter);
        }
 
-       et131x_phy_mii_read(adapter, phydev->addr, MII_BMSR, &bmsr_data);
+       if (phydev->link != adapter->link) {
+               /* If we are in coma mode, we need to disable it. */
+               pm_csr = readl(&iomem->global.pm_csr);
+               if (pm_csr & ET_PM_PHY_SW_COMA) {
+                       /*
+                        * Check to see if we are in coma mode and if
+                        * so, disable it because we will not be able
+                        * to read PHY values until we are out.
+                        */
+                       et1310_disable_phy_coma(adapter);
+               }
+
+               if (phydev->link) {
+                       adapter->boot_coma = 20;
+               } else {
+                       dev_warn(&adapter->pdev->dev,
+                           "Link down - cable problem ?\n");
+
+                       if (phydev && phydev->speed == SPEED_10) {
+                               /* NOTE - Is there a way to query this without
+                                * TruePHY?
+                                * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
+                                * EMI_TRUEPHY_A13O)
+                                */
+                               u16 register18;
+
+                               et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
+                                                &register18);
+                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                                register18 | 0x4);
+                               et131x_mii_write(adapter, PHY_INDEX_REG,
+                                                register18 | 0x8402);
+                               et131x_mii_write(adapter, PHY_DATA_REG,
+                                                register18 | 511);
+                               et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
+                                                register18);
+                       }
+
+                       /* Free the packets being actively sent & stopped */
+                       et131x_free_busy_send_packets(adapter);
+
+                       /* Re-initialize the send structures */
+                       et131x_init_send(adapter);
 
-       bmsr_ints = adapter->bmsr ^ bmsr_data;
-       adapter->bmsr = bmsr_data;
+                       /* Reset the RFD list and re-start RU */
+                       et131x_reset_recv(adapter);
 
-       /* Do all the cable in / cable out stuff */
-       et131x_mii_check(adapter, bmsr_data, bmsr_ints);
+                       /*
+                        * Bring the device back to the state it was during
+                        * init prior to autonegotiation being complete. This
+                        * way, when we get the auto-neg complete interrupt,
+                        * we can complete init by calling config_mac_regs2.
+                        */
+                       et131x_soft_reset(adapter);
 
-       phy_print_status(phydev);
+                       /* Setup ET1310 as per the documentation */
+                       et131x_adapter_setup(adapter);
+               }
+
+               adapter->link = phydev->link;
+
+               phy_print_status(phydev);
+       }
 }
 
 int et131x_mii_probe(struct net_device *netdev)