mmc: sdhci-esdhc-imx: correct the tuning-step setting
authorHaibo Chen <haibo.chen@freescale.com>
Tue, 10 Nov 2015 09:43:30 +0000 (17:43 +0800)
committerUlf Hansson <ulf.hansson@linaro.org>
Tue, 22 Dec 2015 10:32:09 +0000 (11:32 +0100)
Here we use '|=' to set the tuning-step, but before that, we should
clear the tuning-step, otherwise we could got the wrong setting.

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Acked-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sdhci-esdhc-imx.c

index 1f1582f6cccbb3454f0824e9dcf39e170a76f395..f25f29253595b33b47c75bd30f94d642d37cdf60 100644 (file)
@@ -76,6 +76,7 @@
 #define ESDHC_STD_TUNING_EN            (1 << 24)
 /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
 #define ESDHC_TUNING_START_TAP         0x1
+#define ESDHC_TUNING_STEP_MASK         0x00070000
 #define ESDHC_TUNING_STEP_SHIFT                16
 
 /* pinctrl state */
@@ -489,9 +490,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
                                m |= ESDHC_MIX_CTRL_FBCLK_SEL;
                                tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL);
                                tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP;
-                               if (imx_data->boarddata.tuning_step)
+                               if (imx_data->boarddata.tuning_step) {
+                                       tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK;
                                        tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT;
-                                       writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
+                               }
+                               writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
                        } else {
                                v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
                        }