- Compro Videomate DVB-T300
- Compro Videomate DVB-T200
- AVerMedia AVerTVHD MCE A180
+ - KWorld PC150-U ATSC Hybrid
rc-it913x-v2.o \
rc-kaiomy.o \
rc-kworld-315u.o \
+ rc-kworld-pc150u.o \
rc-kworld-plus-tv-analog.o \
rc-leadtek-y04g0051.o \
rc-lirc.o \
--- /dev/null
+/* kworld-pc150u.c - Keytable for kworld_pc150u Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Kyle Strickland
+ * (based on kworld-plus-tv-analog.c by
+ * Mauro Carvalho Chehab <mchehab@redhat.com>)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+/* Kworld PC150-U
+ Kyle Strickland <kyle@kyle.strickland.name>
+ */
+
+static struct rc_map_table kworld_pc150u[] = {
+ { 0x0c, KEY_MEDIA }, /* Kworld key */
+ { 0x16, KEY_EJECTCLOSECD }, /* -> ) */
+ { 0x1d, KEY_POWER2 },
+
+ { 0x00, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x02, KEY_3 },
+ { 0x03, KEY_4 },
+ { 0x04, KEY_5 },
+ { 0x05, KEY_6 },
+ { 0x06, KEY_7 },
+ { 0x07, KEY_8 },
+ { 0x08, KEY_9 },
+ { 0x0a, KEY_0 },
+
+ { 0x09, KEY_AGAIN },
+ { 0x14, KEY_MUTE },
+
+ { 0x1e, KEY_LAST },
+ { 0x17, KEY_ZOOM },
+ { 0x1f, KEY_HOMEPAGE },
+ { 0x0e, KEY_ESC },
+
+ { 0x20, KEY_UP },
+ { 0x21, KEY_DOWN },
+ { 0x42, KEY_LEFT },
+ { 0x43, KEY_RIGHT },
+ { 0x0b, KEY_ENTER },
+
+ { 0x10, KEY_CHANNELUP },
+ { 0x11, KEY_CHANNELDOWN },
+
+ { 0x13, KEY_VOLUMEUP },
+ { 0x12, KEY_VOLUMEDOWN },
+
+ { 0x19, KEY_TIME}, /* Timeshift */
+ { 0x1a, KEY_STOP},
+ { 0x1b, KEY_RECORD},
+ { 0x4b, KEY_EMAIL},
+
+ { 0x40, KEY_REWIND},
+ { 0x44, KEY_PLAYPAUSE},
+ { 0x41, KEY_FORWARD},
+ { 0x22, KEY_TEXT},
+
+ { 0x15, KEY_AUDIO}, /* ((*)) */
+ { 0x0f, KEY_MODE}, /* display ratio */
+ { 0x1c, KEY_SYSRQ}, /* snapshot */
+ { 0x4a, KEY_SLEEP}, /* sleep timer */
+
+ { 0x48, KEY_SOUND}, /* switch theater mode */
+ { 0x49, KEY_BLUE}, /* A */
+ { 0x18, KEY_RED}, /* B */
+ { 0x23, KEY_GREEN}, /* C */
+};
+
+static struct rc_map_list kworld_pc150u_map = {
+ .map = {
+ .scan = kworld_pc150u,
+ .size = ARRAY_SIZE(kworld_pc150u),
+ .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_KWORLD_PC150U,
+ }
+};
+
+static int __init init_rc_map_kworld_pc150u(void)
+{
+ return rc_map_register(&kworld_pc150u_map);
+}
+
+static void __exit exit_rc_map_kworld_pc150u(void)
+{
+ rc_map_unregister(&kworld_pc150u_map);
+}
+
+module_init(init_rc_map_kworld_pc150u)
+module_exit(exit_rc_map_kworld_pc150u)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kyle Strickland <kyle@kyle.strickland.name>");
#include "tea5767.h"
#include "tda18271.h"
#include "xc5000.h"
+#include "s5h1411.h"
/* commly used strings */
static char name_mute[] = "mute";
.amux = LINE1,
} },
},
+ [SAA7134_BOARD_KWORLD_PC150U] = {
+ .name = "Kworld PC150-U",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 1 << 21,
+ .ts_type = SAA7134_MPEG_TS_PARALLEL,
+ .inputs = { {
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0000000,
+ },
+ },
};
.subdevice = 0x7352,
.driver_data = SAA7134_BOARD_KWORLD_ATSC110, /* ATSC 115 */
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */
+ .subvendor = 0x17de,
+ .subdevice = 0xa134,
+ .driver_data = SAA7134_BOARD_KWORLD_PC150U,
+ }, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461,
return 0;
}
+static int saa7134_kworld_pc150u_toggle_agc(struct saa7134_dev *dev,
+ enum tda18271_mode mode)
+{
+ switch (mode) {
+ case TDA18271_ANALOG:
+ saa7134_set_gpio(dev, 18, 0);
+ break;
+ case TDA18271_DIGITAL:
+ saa7134_set_gpio(dev, 18, 1);
+ msleep(30);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
int command, int arg)
{
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg);
break;
+ case SAA7134_BOARD_KWORLD_PC150U:
+ ret = saa7134_kworld_pc150u_toggle_agc(dev, arg);
+ break;
default:
break;
}
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
case SAA7134_BOARD_AVERMEDIA_M733A:
case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+ case SAA7134_BOARD_KWORLD_PC150U:
case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
case SAA7134_BOARD_BEHOLD_X7:
case SAA7134_BOARD_BEHOLD_H7:
case SAA7134_BOARD_BEHOLD_A7:
+ case SAA7134_BOARD_KWORLD_PC150U:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
#include "zl10036.h"
#include "zl10039.h"
#include "mt312.h"
+#include "s5h1411.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
+static struct tda18271_std_map kworld_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config kworld_pc150u_tda18271_config = {
+ .std_map = &kworld_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+ .config = 3, /* Use tuner callback for AGC */
+ .rf_cal_on_startup = 1
+};
+
+static struct s5h1411_config kworld_s5h1411_config = {
+ .output_mode = S5H1411_PARALLEL_OUTPUT,
+ .gpio = S5H1411_GPIO_OFF,
+ .qam_if = S5H1411_IF_4000,
+ .vsb_if = S5H1411_IF_3250,
+ .inversion = S5H1411_INVERSION_ON,
+ .status_mode = S5H1411_DEMODLOCKING,
+ .mpeg_timing =
+ S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+
/* ==================================================================
* Core code
*/
&dev->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D);
break;
+ case SAA7134_BOARD_KWORLD_PC150U:
+ saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
+ saa7134_tuner_callback(dev, 0,
+ TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &kworld_s5h1411_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &kworld_pc150u_tda18271_config);
+ }
+ break;
case SAA7134_BOARD_FLYDVBS_LR300:
fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
addr = msgs[i].addr << 1;
if (msgs[i].flags & I2C_M_RD)
addr |= 1;
- if (i > 0 && msgs[i].flags & I2C_M_RD && msgs[i].addr != 0x40) {
+ if (i > 0 && msgs[i].flags &
+ I2C_M_RD && msgs[i].addr != 0x40 &&
+ msgs[i].addr != 0x19) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
* thanks to pinnacle for the hint */
d1printk("%02x", rc);
msgs[i].buf[byte] = rc;
}
+ /* discard mysterious extra byte when reading
+ from Samsung S5H1411. i2c bus gets error
+ if we do not. */
+ if (0x19 == msgs[i].addr) {
+ d1printk(" ?");
+ rc = i2c_recv_byte(dev);
+ if (rc < 0)
+ goto err;
+ d1printk("%02x", rc);
+ }
} else {
/* write bytes */
d2printk("write bytes\n");
return 1;
}
+/* copied and modified from get_key_msi_tvanywhere_plus() */
+static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key,
+ u32 *ir_raw)
+{
+ unsigned char b;
+ unsigned int gpio;
+
+ /* <dev> is needed to access GPIO. Used by the saa_readl macro. */
+ struct saa7134_dev *dev = ir->c->adapter->algo_data;
+ if (dev == NULL) {
+ i2cdprintk("get_key_kworld_pc150u: "
+ "ir->c->adapter->algo_data is NULL!\n");
+ return -EIO;
+ }
+
+ /* rising SAA7134_GPIO_GPRESCAN reads the status */
+
+ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+ saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+ gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+ /* GPIO&0x100 is pulsed low when a button is pressed. Don't do
+ I2C receive if gpio&0x100 is not low. */
+
+ if (gpio & 0x100)
+ return 0; /* No button press */
+
+ /* GPIO says there is a button press. Get it. */
+
+ if (1 != i2c_master_recv(ir->c, &b, 1)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+
+ /* No button press */
+
+ if (b == 0xff)
+ return 0;
+
+ /* Button pressed */
+
+ dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b);
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
{
unsigned char b;
msg_msi.addr, dev->i2c_adap.name,
(1 == rc) ? "yes" : "no");
break;
+ case SAA7134_BOARD_KWORLD_PC150U:
+ /* copied and modified from MSI TV@nywhere Plus */
+ dev->init_data.name = "Kworld PC150-U";
+ dev->init_data.get_key = get_key_kworld_pc150u;
+ dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U;
+ info.addr = 0x30;
+ /* MSI TV@nywhere Plus controller doesn't seem to
+ respond to probes unless we read something from
+ an existing device. Weird...
+ REVISIT: might no longer be needed */
+ rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
+ dprintk("probe 0x%02x @ %s: %s\n",
+ msg_msi.addr, dev->i2c_adap.name,
+ (1 == rc) ? "yes" : "no");
+ break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->init_data.name = "HVR 1110";
dev->init_data.get_key = get_key_hvr1110;
unsigned users;
u32 polling;
- u32 last_gpio;
- u32 mask_keycode, mask_keydown, mask_keyup;
+ u32 last_gpio;
+ u32 mask_keycode, mask_keydown, mask_keyup;
bool running;
bool active;
#define SAA7134_BOARD_BEHOLD_501 186
#define SAA7134_BOARD_BEHOLD_503FM 187
#define SAA7134_BOARD_SENSORAY811_911 188
+#define SAA7134_BOARD_KWORLD_PC150U 189
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
#define RC_MAP_IT913X_V2 "rc-it913x-v2"
#define RC_MAP_KAIOMY "rc-kaiomy"
#define RC_MAP_KWORLD_315U "rc-kworld-315u"
+#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"
#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
#define RC_MAP_LIRC "rc-lirc"
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff