#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
#define CSR_INT_BIT_DNLD (1 << 28) /* uCode Download */
#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
-#define CSR_INT_BIT_MAC_CLK_ACTV (1 << 26) /* NIC controller's clock toggled on/off */
+#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
#define CSR_INT_BIT_DNLD (1 << 28) /* uCode Download */
#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
-#define CSR_INT_BIT_MAC_CLK_ACTV (1 << 26) /* NIC controller's clock toggled on/off */
+#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
#ifdef CONFIG_IWL3945_DEBUG
if (iwl3945_debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
- IWL_DEBUG_ISR("Microcode started or stopped.\n");
+ if (inta & CSR_INT_BIT_SCD)
+ IWL_DEBUG_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE)
}
#endif
/* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled (4965 only) */
if (inta & CSR_INT_BIT_RF_KILL) {
IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
+ inta &= ~CSR_INT_BIT_SCD;
+
/* iwl3945_irq_tasklet() will service interrupts and re-enable them */
- tasklet_schedule(&priv->irq_tasklet);
+ if (likely(inta || inta_fh))
+ tasklet_schedule(&priv->irq_tasklet);
unplugged:
spin_unlock(&priv->lock);
#ifdef CONFIG_IWL4965_DEBUG
if (iwl4965_debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
- IWL_DEBUG_ISR("Microcode started or stopped.\n");
+ if (inta & CSR_INT_BIT_SCD)
+ IWL_DEBUG_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE)
}
#endif
/* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled */
if (inta & CSR_INT_BIT_RF_KILL) {
IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
+ inta &= ~CSR_INT_BIT_SCD;
+
/* iwl4965_irq_tasklet() will service interrupts and re-enable them */
- tasklet_schedule(&priv->irq_tasklet);
+ if (likely(inta || inta_fh))
+ tasklet_schedule(&priv->irq_tasklet);
unplugged:
spin_unlock(&priv->lock);