/* subdevice types */
- enum comedi_subdevice_type {
- COMEDI_SUBD_UNUSED, /* unused by driver */
- COMEDI_SUBD_AI, /* analog input */
- COMEDI_SUBD_AO, /* analog output */
- COMEDI_SUBD_DI, /* digital input */
- COMEDI_SUBD_DO, /* digital output */
- COMEDI_SUBD_DIO, /* digital input/output */
- COMEDI_SUBD_COUNTER, /* counter */
- COMEDI_SUBD_TIMER, /* timer */
- COMEDI_SUBD_MEMORY, /* memory, EEPROM, DPRAM */
- COMEDI_SUBD_CALIB, /* calibration DACs */
- COMEDI_SUBD_PROC, /* processor, DSP */
- COMEDI_SUBD_SERIAL, /* serial IO */
- COMEDI_SUBD_PWM /* PWM */
- };
+enum comedi_subdevice_type {
+ COMEDI_SUBD_UNUSED, /* unused by driver */
+ COMEDI_SUBD_AI, /* analog input */
+ COMEDI_SUBD_AO, /* analog output */
+ COMEDI_SUBD_DI, /* digital input */
+ COMEDI_SUBD_DO, /* digital output */
+ COMEDI_SUBD_DIO, /* digital input/output */
+ COMEDI_SUBD_COUNTER, /* counter */
+ COMEDI_SUBD_TIMER, /* timer */
+ COMEDI_SUBD_MEMORY, /* memory, EEPROM, DPRAM */
+ COMEDI_SUBD_CALIB, /* calibration DACs */
+ COMEDI_SUBD_PROC, /* processor, DSP */
+ COMEDI_SUBD_SERIAL, /* serial IO */
+ COMEDI_SUBD_PWM /* PWM */
+};
/* configuration instructions */
- enum configuration_ids {
- INSN_CONFIG_DIO_INPUT = 0,
- INSN_CONFIG_DIO_OUTPUT = 1,
- INSN_CONFIG_DIO_OPENDRAIN = 2,
- INSN_CONFIG_ANALOG_TRIG = 16,
+enum configuration_ids {
+ INSN_CONFIG_DIO_INPUT = 0,
+ INSN_CONFIG_DIO_OUTPUT = 1,
+ INSN_CONFIG_DIO_OPENDRAIN = 2,
+ INSN_CONFIG_ANALOG_TRIG = 16,
/* INSN_CONFIG_WAVEFORM = 17, */
/* INSN_CONFIG_TRIG = 18, */
/* INSN_CONFIG_COUNTER = 19, */
- INSN_CONFIG_ALT_SOURCE = 20,
- INSN_CONFIG_DIGITAL_TRIG = 21,
- INSN_CONFIG_BLOCK_SIZE = 22,
- INSN_CONFIG_TIMER_1 = 23,
- INSN_CONFIG_FILTER = 24,
- INSN_CONFIG_CHANGE_NOTIFY = 25,
-
- /*ALPHA*/ INSN_CONFIG_SERIAL_CLOCK = 26,
- INSN_CONFIG_BIDIRECTIONAL_DATA = 27,
- INSN_CONFIG_DIO_QUERY = 28,
- INSN_CONFIG_PWM_OUTPUT = 29,
- INSN_CONFIG_GET_PWM_OUTPUT = 30,
- INSN_CONFIG_ARM = 31,
- INSN_CONFIG_DISARM = 32,
- INSN_CONFIG_GET_COUNTER_STATUS = 33,
- INSN_CONFIG_RESET = 34,
- /* Use CTR as single pulsegenerator */
- INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001,
- /* Use CTR as pulsetraingenerator */
- INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002,
- /* Use the counter as encoder */
- INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
- INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */
- INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */
- /* Set master clock source */
- INSN_CONFIG_SET_CLOCK_SRC = 2003,
- INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
- INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
- /* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
- /* Get size in bytes of subdevice's on-board fifos used during
- * streaming input/output */
- INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
- INSN_CONFIG_SET_COUNTER_MODE = 4097,
- /* INSN_CONFIG_8254_SET_MODE is deprecated */
- INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE,
- INSN_CONFIG_8254_READ_STATUS = 4098,
- INSN_CONFIG_SET_ROUTING = 4099,
- INSN_CONFIG_GET_ROUTING = 4109,
-/* PWM */
- INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */
- INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */
- INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */
- /* sets H bridge: duty cycle and sign bit for a relay at the
- * same time */
- INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
- /* gets H bridge data: duty cycle and the sign bit */
- INSN_CONFIG_PWM_GET_H_BRIDGE = 5004
- };
-
- enum comedi_io_direction {
- COMEDI_INPUT = 0,
- COMEDI_OUTPUT = 1,
- COMEDI_OPENDRAIN = 2
- };
-
- enum comedi_support_level {
- COMEDI_UNKNOWN_SUPPORT = 0,
- COMEDI_SUPPORTED,
- COMEDI_UNSUPPORTED
- };
+ INSN_CONFIG_ALT_SOURCE = 20,
+ INSN_CONFIG_DIGITAL_TRIG = 21,
+ INSN_CONFIG_BLOCK_SIZE = 22,
+ INSN_CONFIG_TIMER_1 = 23,
+ INSN_CONFIG_FILTER = 24,
+ INSN_CONFIG_CHANGE_NOTIFY = 25,
+
+ INSN_CONFIG_SERIAL_CLOCK = 26, /*ALPHA*/
+ INSN_CONFIG_BIDIRECTIONAL_DATA = 27,
+ INSN_CONFIG_DIO_QUERY = 28,
+ INSN_CONFIG_PWM_OUTPUT = 29,
+ INSN_CONFIG_GET_PWM_OUTPUT = 30,
+ INSN_CONFIG_ARM = 31,
+ INSN_CONFIG_DISARM = 32,
+ INSN_CONFIG_GET_COUNTER_STATUS = 33,
+ INSN_CONFIG_RESET = 34,
+ /* Use CTR as single pulsegenerator */
+ INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001,
+ /* Use CTR as pulsetraingenerator */
+ INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002,
+ /* Use the counter as encoder */
+ INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
+ INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */
+ INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */
+ /* Set master clock source */
+ INSN_CONFIG_SET_CLOCK_SRC = 2003,
+ INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
+ INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
+ /* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
+ /* Get size in bytes of subdevice's on-board fifos used during
+ * streaming input/output */
+ INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
+ INSN_CONFIG_SET_COUNTER_MODE = 4097,
+ /* INSN_CONFIG_8254_SET_MODE is deprecated */
+ INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE,
+ INSN_CONFIG_8254_READ_STATUS = 4098,
+ INSN_CONFIG_SET_ROUTING = 4099,
+ INSN_CONFIG_GET_ROUTING = 4109,
+ /* PWM */
+ INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */
+ INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */
+ INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */
+ /* sets H bridge: duty cycle and sign bit for a relay at the
+ * same time */
+ INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
+ /* gets H bridge data: duty cycle and the sign bit */
+ INSN_CONFIG_PWM_GET_H_BRIDGE = 5004
+};
+
+enum comedi_io_direction {
+ COMEDI_INPUT = 0,
+ COMEDI_OUTPUT = 1,
+ COMEDI_OPENDRAIN = 2
+};
+
+enum comedi_support_level {
+ COMEDI_UNKNOWN_SUPPORT = 0,
+ COMEDI_SUPPORTED,
+ COMEDI_UNSUPPORTED
+};
/* ioctls */
/* structures */
- struct comedi_trig {
- unsigned int subdev; /* subdevice */
- unsigned int mode; /* mode */
- unsigned int flags;
- unsigned int n_chan; /* number of channels */
- unsigned int *chanlist; /* channel/range list */
- short *data; /* data list, size depends on subd flags */
- unsigned int n; /* number of scans */
- unsigned int trigsrc;
- unsigned int trigvar;
- unsigned int trigvar1;
- unsigned int data_len;
- unsigned int unused[3];
- };
-
- struct comedi_insn {
- unsigned int insn;
- unsigned int n;
- unsigned int __user *data;
- unsigned int subdev;
- unsigned int chanspec;
- unsigned int unused[3];
- };
-
- struct comedi_insnlist {
- unsigned int n_insns;
- struct comedi_insn __user *insns;
- };
-
- struct comedi_cmd {
- unsigned int subdev;
- unsigned int flags;
-
- unsigned int start_src;
- unsigned int start_arg;
-
- unsigned int scan_begin_src;
- unsigned int scan_begin_arg;
-
- unsigned int convert_src;
- unsigned int convert_arg;
-
- unsigned int scan_end_src;
- unsigned int scan_end_arg;
-
- unsigned int stop_src;
- unsigned int stop_arg;
-
- unsigned int __user *chanlist; /* channel/range list */
- unsigned int chanlist_len;
-
- short __user *data; /* data list, size depends on subd flags */
- unsigned int data_len;
- };
-
- struct comedi_chaninfo {
- unsigned int subdev;
- unsigned int __user *maxdata_list;
- unsigned int __user *flaglist;
- unsigned int __user *rangelist;
- unsigned int unused[4];
- };
-
- struct comedi_rangeinfo {
- unsigned int range_type;
- void __user *range_ptr;
- };
-
- struct comedi_krange {
- int min; /* fixed point, multiply by 1e-6 */
- int max; /* fixed point, multiply by 1e-6 */
- unsigned int flags;
- };
-
- struct comedi_subdinfo {
- unsigned int type;
- unsigned int n_chan;
- unsigned int subd_flags;
- unsigned int timer_type;
- unsigned int len_chanlist;
- unsigned int maxdata;
- unsigned int flags; /* channel flags */
- unsigned int range_type; /* lookup in kernel */
- unsigned int settling_time_0;
- /* see support_level enum for values */
- unsigned insn_bits_support;
- unsigned int unused[8];
- };
-
- struct comedi_devinfo {
- unsigned int version_code;
- unsigned int n_subdevs;
- char driver_name[COMEDI_NAMELEN];
- char board_name[COMEDI_NAMELEN];
- int read_subdevice;
- int write_subdevice;
- int unused[30];
- };
-
- struct comedi_devconfig {
- char board_name[COMEDI_NAMELEN];
- int options[COMEDI_NDEVCONFOPTS];
- };
-
- struct comedi_bufconfig {
- unsigned int subdevice;
- unsigned int flags;
-
- unsigned int maximum_size;
- unsigned int size;
-
- unsigned int unused[4];
- };
-
- struct comedi_bufinfo {
- unsigned int subdevice;
- unsigned int bytes_read;
-
- unsigned int buf_write_ptr;
- unsigned int buf_read_ptr;
- unsigned int buf_write_count;
- unsigned int buf_read_count;
-
- unsigned int bytes_written;
-
- unsigned int unused[4];
- };
+struct comedi_trig {
+ unsigned int subdev; /* subdevice */
+ unsigned int mode; /* mode */
+ unsigned int flags;
+ unsigned int n_chan; /* number of channels */
+ unsigned int *chanlist; /* channel/range list */
+ short *data; /* data list, size depends on subd flags */
+ unsigned int n; /* number of scans */
+ unsigned int trigsrc;
+ unsigned int trigvar;
+ unsigned int trigvar1;
+ unsigned int data_len;
+ unsigned int unused[3];
+};
+
+struct comedi_insn {
+ unsigned int insn;
+ unsigned int n;
+ unsigned int __user *data;
+ unsigned int subdev;
+ unsigned int chanspec;
+ unsigned int unused[3];
+};
+
+struct comedi_insnlist {
+ unsigned int n_insns;
+ struct comedi_insn __user *insns;
+};
+
+struct comedi_cmd {
+ unsigned int subdev;
+ unsigned int flags;
+
+ unsigned int start_src;
+ unsigned int start_arg;
+
+ unsigned int scan_begin_src;
+ unsigned int scan_begin_arg;
+
+ unsigned int convert_src;
+ unsigned int convert_arg;
+
+ unsigned int scan_end_src;
+ unsigned int scan_end_arg;
+
+ unsigned int stop_src;
+ unsigned int stop_arg;
+
+ unsigned int __user *chanlist; /* channel/range list */
+ unsigned int chanlist_len;
+
+ short __user *data; /* data list, size depends on subd flags */
+ unsigned int data_len;
+};
+
+struct comedi_chaninfo {
+ unsigned int subdev;
+ unsigned int __user *maxdata_list;
+ unsigned int __user *flaglist;
+ unsigned int __user *rangelist;
+ unsigned int unused[4];
+};
+
+struct comedi_rangeinfo {
+ unsigned int range_type;
+ void __user *range_ptr;
+};
+
+struct comedi_krange {
+ int min; /* fixed point, multiply by 1e-6 */
+ int max; /* fixed point, multiply by 1e-6 */
+ unsigned int flags;
+};
+
+struct comedi_subdinfo {
+ unsigned int type;
+ unsigned int n_chan;
+ unsigned int subd_flags;
+ unsigned int timer_type;
+ unsigned int len_chanlist;
+ unsigned int maxdata;
+ unsigned int flags; /* channel flags */
+ unsigned int range_type; /* lookup in kernel */
+ unsigned int settling_time_0;
+ /* see support_level enum for values */
+ unsigned insn_bits_support;
+ unsigned int unused[8];
+};
+
+struct comedi_devinfo {
+ unsigned int version_code;
+ unsigned int n_subdevs;
+ char driver_name[COMEDI_NAMELEN];
+ char board_name[COMEDI_NAMELEN];
+ int read_subdevice;
+ int write_subdevice;
+ int unused[30];
+};
+
+struct comedi_devconfig {
+ char board_name[COMEDI_NAMELEN];
+ int options[COMEDI_NDEVCONFOPTS];
+};
+
+struct comedi_bufconfig {
+ unsigned int subdevice;
+ unsigned int flags;
+
+ unsigned int maximum_size;
+ unsigned int size;
+
+ unsigned int unused[4];
+};
+
+struct comedi_bufinfo {
+ unsigned int subdevice;
+ unsigned int bytes_read;
+
+ unsigned int buf_write_ptr;
+ unsigned int buf_read_ptr;
+ unsigned int buf_write_count;
+ unsigned int buf_read_count;
+
+ unsigned int bytes_written;
+
+ unsigned int unused[4];
+};
/* range stuff */
*/
- enum i8254_mode {
- I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */
- I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */
- I8254_MODE2 = (2 << 1), /* Rate generator */
- I8254_MODE3 = (3 << 1), /* Square wave mode */
- I8254_MODE4 = (4 << 1), /* Software triggered strobe */
- I8254_MODE5 = (5 << 1), /* Hardware triggered strobe
- * (retriggerable) */
- I8254_BCD = 1, /* use binary-coded decimal instead of binary
+enum i8254_mode {
+ I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */
+ I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */
+ I8254_MODE2 = (2 << 1), /* Rate generator */
+ I8254_MODE3 = (3 << 1), /* Square wave mode */
+ I8254_MODE4 = (4 << 1), /* Software triggered strobe */
+ I8254_MODE5 = (5 << 1), /* Hardware triggered strobe
+ * (retriggerable) */
+ I8254_BCD = 1, /* use binary-coded decimal instead of binary
* (pretty useless) */
- I8254_BINARY = 0
- };
-
- static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel)
- {
- if (pfi_channel < 10)
- return 0x1 + pfi_channel;
- else
- return 0xb + pfi_channel;
- }
-
- static inline unsigned NI_USUAL_RTSI_SELECT(unsigned rtsi_channel)
- {
- if (rtsi_channel < 7)
- return 0xb + rtsi_channel;
- else
- return 0x1b;
- }
+ I8254_BINARY = 0
+};
+
+static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel)
+{
+ if (pfi_channel < 10)
+ return 0x1 + pfi_channel;
+ else
+ return 0xb + pfi_channel;
+}
+
+static inline unsigned NI_USUAL_RTSI_SELECT(unsigned rtsi_channel)
+{
+ if (rtsi_channel < 7)
+ return 0xb + rtsi_channel;
+ else
+ return 0x1b;
+}
/* mode bits for NI general-purpose counters, set with
* INSN_CONFIG_SET_COUNTER_MODE */
#define NI_GPCT_COUNTING_MODE_SHIFT 16
#define NI_GPCT_INDEX_PHASE_BITSHIFT 20
#define NI_GPCT_COUNTING_DIRECTION_SHIFT 24
- enum ni_gpct_mode_bits {
- NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4,
- NI_GPCT_EDGE_GATE_MODE_MASK = 0x18,
- NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0,
- NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8,
- NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10,
- NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18,
- NI_GPCT_STOP_MODE_MASK = 0x60,
- NI_GPCT_STOP_ON_GATE_BITS = 0x00,
- NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20,
- NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40,
- NI_GPCT_LOAD_B_SELECT_BIT = 0x80,
- NI_GPCT_OUTPUT_MODE_MASK = 0x300,
- NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100,
- NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200,
- NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300,
- NI_GPCT_HARDWARE_DISARM_MASK = 0xc00,
- NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000,
- NI_GPCT_DISARM_AT_TC_BITS = 0x400,
- NI_GPCT_DISARM_AT_GATE_BITS = 0x800,
- NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00,
- NI_GPCT_LOADING_ON_TC_BIT = 0x1000,
- NI_GPCT_LOADING_ON_GATE_BIT = 0x4000,
- NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_NORMAL_BITS =
- 0x0 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS =
- 0x1 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS =
- 0x2 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS =
- 0x3 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS =
- 0x4 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS =
- 0x6 << NI_GPCT_COUNTING_MODE_SHIFT,
- NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
- NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS =
- 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT,
- NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS =
- 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT,
- NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS =
- 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT,
- NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS =
- 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
- NI_GPCT_INDEX_ENABLE_BIT = 0x400000,
- NI_GPCT_COUNTING_DIRECTION_MASK =
- 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
- NI_GPCT_COUNTING_DIRECTION_DOWN_BITS =
- 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
- NI_GPCT_COUNTING_DIRECTION_UP_BITS =
- 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
- NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS =
- 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
- NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS =
- 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
- NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000,
- NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0,
- NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000,
- NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000,
- NI_GPCT_OR_GATE_BIT = 0x10000000,
- NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000
- };
+enum ni_gpct_mode_bits {
+ NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4,
+ NI_GPCT_EDGE_GATE_MODE_MASK = 0x18,
+ NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0,
+ NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8,
+ NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10,
+ NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18,
+ NI_GPCT_STOP_MODE_MASK = 0x60,
+ NI_GPCT_STOP_ON_GATE_BITS = 0x00,
+ NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20,
+ NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40,
+ NI_GPCT_LOAD_B_SELECT_BIT = 0x80,
+ NI_GPCT_OUTPUT_MODE_MASK = 0x300,
+ NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100,
+ NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200,
+ NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300,
+ NI_GPCT_HARDWARE_DISARM_MASK = 0xc00,
+ NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000,
+ NI_GPCT_DISARM_AT_TC_BITS = 0x400,
+ NI_GPCT_DISARM_AT_GATE_BITS = 0x800,
+ NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00,
+ NI_GPCT_LOADING_ON_TC_BIT = 0x1000,
+ NI_GPCT_LOADING_ON_GATE_BIT = 0x4000,
+ NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_NORMAL_BITS =
+ 0x0 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS =
+ 0x1 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS =
+ 0x2 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS =
+ 0x3 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS =
+ 0x4 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS =
+ 0x6 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS =
+ 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS =
+ 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS =
+ 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS =
+ 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_ENABLE_BIT = 0x400000,
+ NI_GPCT_COUNTING_DIRECTION_MASK =
+ 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_DOWN_BITS =
+ 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_UP_BITS =
+ 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS =
+ 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS =
+ 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000,
+ NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0,
+ NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000,
+ NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000,
+ NI_GPCT_OR_GATE_BIT = 0x10000000,
+ NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000
+};
/* Bits for setting a clock source with
* INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters. */
- enum ni_gpct_clock_source_bits {
- NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f,
- NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0,
- NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1,
- NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2,
- NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3,
- NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4,
- NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5,
- /* NI 660x-specific */
- NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6,
- NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7,
- NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8,
- NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9,
- NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000,
- NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0,
- /* divide source by 2 */
- NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000,
- /* divide source by 8 */
- NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000,
- NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000
- };
- static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n)
- {
- /* NI 660x-specific */
- return 0x10 + n;
- }
- static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n)
- {
- return 0x18 + n;
- }
- static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n)
- {
- /* no pfi on NI 660x */
- return 0x20 + n;
- }
+enum ni_gpct_clock_source_bits {
+ NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f,
+ NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0,
+ NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1,
+ NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2,
+ NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3,
+ NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4,
+ NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5,
+ /* NI 660x-specific */
+ NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6,
+ NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7,
+ NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8,
+ NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9,
+ NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000,
+ NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0,
+ /* divide source by 2 */
+ NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000,
+ /* divide source by 8 */
+ NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000,
+ NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000
+};
+static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n)
+{
+ /* NI 660x-specific */
+ return 0x10 + n;
+}
+static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n)
+{
+ return 0x18 + n;
+}
+static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n)
+{
+ /* no pfi on NI 660x */
+ return 0x20 + n;
+}
/* Possibilities for setting a gate source with
INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters.
May be bitwise-or'd with CR_EDGE or CR_INVERT. */
- enum ni_gpct_gate_select {
- /* m-series gates */
- NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0,
- NI_GPCT_AI_START2_GATE_SELECT = 0x12,
- NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13,
- NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14,
- NI_GPCT_AI_START1_GATE_SELECT = 0x1c,
- NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d,
- NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e,
- NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f,
- /* more gates for 660x */
- NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100,
- NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101,
- /* more gates for 660x "second gate" */
- NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201,
- NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e,
- /* m-series "second gate" sources are unknown,
- * we should add them here with an offset of 0x300 when
- * known. */
- NI_GPCT_DISABLED_GATE_SELECT = 0x8000,
- };
- static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n)
- {
- return 0x102 + n;
- }
- static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n)
- {
- return NI_USUAL_RTSI_SELECT(n);
- }
- static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n)
- {
- return NI_USUAL_PFI_SELECT(n);
- }
- static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n)
- {
- return 0x202 + n;
- }
+enum ni_gpct_gate_select {
+ /* m-series gates */
+ NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0,
+ NI_GPCT_AI_START2_GATE_SELECT = 0x12,
+ NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13,
+ NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14,
+ NI_GPCT_AI_START1_GATE_SELECT = 0x1c,
+ NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d,
+ NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e,
+ NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f,
+ /* more gates for 660x */
+ NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100,
+ NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101,
+ /* more gates for 660x "second gate" */
+ NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201,
+ NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e,
+ /* m-series "second gate" sources are unknown,
+ * we should add them here with an offset of 0x300 when
+ * known. */
+ NI_GPCT_DISABLED_GATE_SELECT = 0x8000,
+};
+static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n)
+{
+ return 0x102 + n;
+}
+static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n)
+{
+ return NI_USUAL_RTSI_SELECT(n);
+}
+static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n)
+{
+ return NI_USUAL_PFI_SELECT(n);
+}
+static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n)
+{
+ return 0x202 + n;
+}
/* Possibilities for setting a source with
INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. */
- enum ni_gpct_other_index {
- NI_GPCT_SOURCE_ENCODER_A,
- NI_GPCT_SOURCE_ENCODER_B,
- NI_GPCT_SOURCE_ENCODER_Z
- };
- enum ni_gpct_other_select {
- /* m-series gates */
- /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */
- NI_GPCT_DISABLED_OTHER_SELECT = 0x8000,
- };
- static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n)
- {
- return NI_USUAL_PFI_SELECT(n);
- }
+enum ni_gpct_other_index {
+ NI_GPCT_SOURCE_ENCODER_A,
+ NI_GPCT_SOURCE_ENCODER_B,
+ NI_GPCT_SOURCE_ENCODER_Z
+};
+enum ni_gpct_other_select {
+ /* m-series gates */
+ /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */
+ NI_GPCT_DISABLED_OTHER_SELECT = 0x8000,
+};
+static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n)
+{
+ return NI_USUAL_PFI_SELECT(n);
+}
/* start sources for ni general-purpose counters for use with
INSN_CONFIG_ARM */
- enum ni_gpct_arm_source {
- NI_GPCT_ARM_IMMEDIATE = 0x0,
- NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter
- * and the adjacent paired
- * counter simultaneously */
- /* NI doesn't document bits for selecting hardware arm triggers.
- * If the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least
- * significant bits (3 bits for 660x or 5 bits for m-series)
- * through to the hardware. This will at least allow someone to
- * figure out what the bits do later. */
- NI_GPCT_ARM_UNKNOWN = 0x1000,
- };
+enum ni_gpct_arm_source {
+ NI_GPCT_ARM_IMMEDIATE = 0x0,
+ NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter
+ * and the adjacent paired
+ * counter simultaneously */
+ /* NI doesn't document bits for selecting hardware arm triggers.
+ * If the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least
+ * significant bits (3 bits for 660x or 5 bits for m-series)
+ * through to the hardware. This will at least allow someone to
+ * figure out what the bits do later. */
+ NI_GPCT_ARM_UNKNOWN = 0x1000,
+};
/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */
- enum ni_gpct_filter_select {
- NI_GPCT_FILTER_OFF = 0x0,
- NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1,
- NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2,
- NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3,
- NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4,
- NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5,
- NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6
- };
+enum ni_gpct_filter_select {
+ NI_GPCT_FILTER_OFF = 0x0,
+ NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1,
+ NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2,
+ NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3,
+ NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4,
+ NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5,
+ NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6
+};
/* PFI digital filtering options for ni m-series for use with
* INSN_CONFIG_FILTER. */
- enum ni_pfi_filter_select {
- NI_PFI_FILTER_OFF = 0x0,
- NI_PFI_FILTER_125ns = 0x1,
- NI_PFI_FILTER_6425ns = 0x2,
- NI_PFI_FILTER_2550us = 0x3
- };
+enum ni_pfi_filter_select {
+ NI_PFI_FILTER_OFF = 0x0,
+ NI_PFI_FILTER_125ns = 0x1,
+ NI_PFI_FILTER_6425ns = 0x2,
+ NI_PFI_FILTER_2550us = 0x3
+};
/* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */
- enum ni_mio_clock_source {
- NI_MIO_INTERNAL_CLOCK = 0,
- NI_MIO_RTSI_CLOCK = 1, /* doesn't work for m-series, use
- NI_MIO_PLL_RTSI_CLOCK() */
- /* the NI_MIO_PLL_* sources are m-series only */
- NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2,
- NI_MIO_PLL_PXI10_CLOCK = 3,
- NI_MIO_PLL_RTSI0_CLOCK = 4
- };
- static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel)
- {
- return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel;
- }
+enum ni_mio_clock_source {
+ NI_MIO_INTERNAL_CLOCK = 0,
+ NI_MIO_RTSI_CLOCK = 1, /* doesn't work for m-series, use
+ NI_MIO_PLL_RTSI_CLOCK() */
+ /* the NI_MIO_PLL_* sources are m-series only */
+ NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2,
+ NI_MIO_PLL_PXI10_CLOCK = 3,
+ NI_MIO_PLL_RTSI0_CLOCK = 4
+};
+static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel)
+{
+ return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel;
+}
/* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING.
The numbers assigned are not arbitrary, they correspond to the bits required
to program the board. */
- enum ni_rtsi_routing {
- NI_RTSI_OUTPUT_ADR_START1 = 0,
- NI_RTSI_OUTPUT_ADR_START2 = 1,
- NI_RTSI_OUTPUT_SCLKG = 2,
- NI_RTSI_OUTPUT_DACUPDN = 3,
- NI_RTSI_OUTPUT_DA_START1 = 4,
- NI_RTSI_OUTPUT_G_SRC0 = 5,
- NI_RTSI_OUTPUT_G_GATE0 = 6,
- NI_RTSI_OUTPUT_RGOUT0 = 7,
- NI_RTSI_OUTPUT_RTSI_BRD_0 = 8,
- NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI
- * clock on line 7 */
- };
- static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n)
- {
- return NI_RTSI_OUTPUT_RTSI_BRD_0 + n;
- }
+enum ni_rtsi_routing {
+ NI_RTSI_OUTPUT_ADR_START1 = 0,
+ NI_RTSI_OUTPUT_ADR_START2 = 1,
+ NI_RTSI_OUTPUT_SCLKG = 2,
+ NI_RTSI_OUTPUT_DACUPDN = 3,
+ NI_RTSI_OUTPUT_DA_START1 = 4,
+ NI_RTSI_OUTPUT_G_SRC0 = 5,
+ NI_RTSI_OUTPUT_G_GATE0 = 6,
+ NI_RTSI_OUTPUT_RGOUT0 = 7,
+ NI_RTSI_OUTPUT_RTSI_BRD_0 = 8,
+ NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI
+ * clock on line 7 */
+};
+static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n)
+{
+ return NI_RTSI_OUTPUT_RTSI_BRD_0 + n;
+}
/* Signals which can be routed to an NI PFI pin on an m-series board with
* INSN_CONFIG_SET_ROUTING. These numbers are also returned by
* INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing
* cannot be changed. The numbers assigned are not arbitrary, they correspond
* to the bits required to program the board. */
- enum ni_pfi_routing {
- NI_PFI_OUTPUT_PFI_DEFAULT = 0,
- NI_PFI_OUTPUT_AI_START1 = 1,
- NI_PFI_OUTPUT_AI_START2 = 2,
- NI_PFI_OUTPUT_AI_CONVERT = 3,
- NI_PFI_OUTPUT_G_SRC1 = 4,
- NI_PFI_OUTPUT_G_GATE1 = 5,
- NI_PFI_OUTPUT_AO_UPDATE_N = 6,
- NI_PFI_OUTPUT_AO_START1 = 7,
- NI_PFI_OUTPUT_AI_START_PULSE = 8,
- NI_PFI_OUTPUT_G_SRC0 = 9,
- NI_PFI_OUTPUT_G_GATE0 = 10,
- NI_PFI_OUTPUT_EXT_STROBE = 11,
- NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12,
- NI_PFI_OUTPUT_GOUT0 = 13,
- NI_PFI_OUTPUT_GOUT1 = 14,
- NI_PFI_OUTPUT_FREQ_OUT = 15,
- NI_PFI_OUTPUT_PFI_DO = 16,
- NI_PFI_OUTPUT_I_ATRIG = 17,
- NI_PFI_OUTPUT_RTSI0 = 18,
- NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26,
- NI_PFI_OUTPUT_SCXI_TRIG1 = 27,
- NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28,
- NI_PFI_OUTPUT_CDI_SAMPLE = 29,
- NI_PFI_OUTPUT_CDO_UPDATE = 30
- };
- static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel)
- {
- return NI_PFI_OUTPUT_RTSI0 + rtsi_channel;
- }
+enum ni_pfi_routing {
+ NI_PFI_OUTPUT_PFI_DEFAULT = 0,
+ NI_PFI_OUTPUT_AI_START1 = 1,
+ NI_PFI_OUTPUT_AI_START2 = 2,
+ NI_PFI_OUTPUT_AI_CONVERT = 3,
+ NI_PFI_OUTPUT_G_SRC1 = 4,
+ NI_PFI_OUTPUT_G_GATE1 = 5,
+ NI_PFI_OUTPUT_AO_UPDATE_N = 6,
+ NI_PFI_OUTPUT_AO_START1 = 7,
+ NI_PFI_OUTPUT_AI_START_PULSE = 8,
+ NI_PFI_OUTPUT_G_SRC0 = 9,
+ NI_PFI_OUTPUT_G_GATE0 = 10,
+ NI_PFI_OUTPUT_EXT_STROBE = 11,
+ NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12,
+ NI_PFI_OUTPUT_GOUT0 = 13,
+ NI_PFI_OUTPUT_GOUT1 = 14,
+ NI_PFI_OUTPUT_FREQ_OUT = 15,
+ NI_PFI_OUTPUT_PFI_DO = 16,
+ NI_PFI_OUTPUT_I_ATRIG = 17,
+ NI_PFI_OUTPUT_RTSI0 = 18,
+ NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26,
+ NI_PFI_OUTPUT_SCXI_TRIG1 = 27,
+ NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28,
+ NI_PFI_OUTPUT_CDI_SAMPLE = 29,
+ NI_PFI_OUTPUT_CDO_UPDATE = 30
+};
+static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel)
+{
+ return NI_PFI_OUTPUT_RTSI0 + rtsi_channel;
+}
/* Signals which can be routed to output on a NI PFI pin on a 660x board
with INSN_CONFIG_SET_ROUTING. The numbers assigned are
to program the board. Lines 0 to 7 can only be set to
NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to
NI_660X_PFI_OUTPUT_COUNTER. */
- enum ni_660x_pfi_routing {
- NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */
- NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */
- };
+enum ni_660x_pfi_routing {
+ NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */
+ NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */
+};
/* NI External Trigger lines. These values are not arbitrary, but are related
* to the bits required to program the board (offset by 1 for historical
* reasons). */
- static inline unsigned NI_EXT_PFI(unsigned pfi_channel)
- {
- return NI_USUAL_PFI_SELECT(pfi_channel) - 1;
- }
- static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel)
- {
- return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1;
- }
+static inline unsigned NI_EXT_PFI(unsigned pfi_channel)
+{
+ return NI_USUAL_PFI_SELECT(pfi_channel) - 1;
+}
+static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel)
+{
+ return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1;
+}
/* status bits for INSN_CONFIG_GET_COUNTER_STATUS */
- enum comedi_counter_status_flags {
- COMEDI_COUNTER_ARMED = 0x1,
- COMEDI_COUNTER_COUNTING = 0x2,
- COMEDI_COUNTER_TERMINAL_COUNT = 0x4,
- };
+enum comedi_counter_status_flags {
+ COMEDI_COUNTER_ARMED = 0x1,
+ COMEDI_COUNTER_COUNTING = 0x2,
+ COMEDI_COUNTER_TERMINAL_COUNT = 0x4,
+};
/* Clock sources for CDIO subdevice on NI m-series boards. Used as the
* scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd
* with CR_INVERT to change polarity. */
- enum ni_m_series_cdio_scan_begin_src {
- NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0,
- NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18,
- NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19,
- NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20,
- NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28,
- NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29,
- NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30,
- NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31,
- NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32,
- NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33
- };
- static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
- {
- return NI_USUAL_PFI_SELECT(pfi_channel);
- }
- static inline unsigned
- NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
- {
- return NI_USUAL_RTSI_SELECT(rtsi_channel);
- }
+enum ni_m_series_cdio_scan_begin_src {
+ NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0,
+ NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18,
+ NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19,
+ NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20,
+ NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28,
+ NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29,
+ NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30,
+ NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31,
+ NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32,
+ NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33
+};
+static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
+{
+ return NI_USUAL_PFI_SELECT(pfi_channel);
+}
+static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
+{
+ return NI_USUAL_RTSI_SELECT(rtsi_channel);
+}
/* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI
* boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to
* change polarity. */
- static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
- {
- return NI_USUAL_PFI_SELECT(pfi_channel);
- }
- static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
- {
- return NI_USUAL_RTSI_SELECT(rtsi_channel);
- }
+static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel)
+{
+ return NI_USUAL_PFI_SELECT(pfi_channel);
+}
+static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel)
+{
+ return NI_USUAL_RTSI_SELECT(rtsi_channel);
+}
/* Bits for setting a clock source with
* INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice. */
- enum ni_freq_out_clock_source_bits {
- NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */
- NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */
- };
+enum ni_freq_out_clock_source_bits {
+ NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */
+ NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */
+};
/* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
* 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */
- enum amplc_dio_clock_source {
- AMPLC_DIO_CLK_CLKN, /* per channel external clock
- input/output pin (pin is only an
- input when clock source set to this
- value, otherwise it is an output) */
- AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */
- AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */
- AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */
- AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */
- AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */
- AMPLC_DIO_CLK_OUTNM1, /* output of preceding counter channel
- (for channel 0, preceding counter
- channel is channel 2 on preceding
- counter subdevice, for first counter
- subdevice, preceding counter
- subdevice is the last counter
- subdevice) */
- AMPLC_DIO_CLK_EXT /* per chip external input pin */
- };
+enum amplc_dio_clock_source {
+ AMPLC_DIO_CLK_CLKN, /* per channel external clock
+ input/output pin (pin is only an
+ input when clock source set to this
+ value, otherwise it is an output) */
+ AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */
+ AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */
+ AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */
+ AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */
+ AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */
+ AMPLC_DIO_CLK_OUTNM1, /* output of preceding counter channel
+ (for channel 0, preceding counter
+ channel is channel 2 on preceding
+ counter subdevice, for first counter
+ subdevice, preceding counter
+ subdevice is the last counter
+ subdevice) */
+ AMPLC_DIO_CLK_EXT /* per chip external input pin */
+};
/* Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for
* 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */
- enum amplc_dio_gate_source {
- AMPLC_DIO_GAT_VCC, /* internal high logic level */
- AMPLC_DIO_GAT_GND, /* internal low logic level */
- AMPLC_DIO_GAT_GATN, /* per channel external gate input */
- AMPLC_DIO_GAT_NOUTNM2, /* negated output of counter channel
- minus 2 (for channels 0 or 1,
- channel minus 2 is channel 1 or 2 on
- the preceding counter subdevice, for
- the first counter subdevice the
- preceding counter subdevice is the
- last counter subdevice) */
- AMPLC_DIO_GAT_RESERVED4,
- AMPLC_DIO_GAT_RESERVED5,
- AMPLC_DIO_GAT_RESERVED6,
- AMPLC_DIO_GAT_RESERVED7
- };
+enum amplc_dio_gate_source {
+ AMPLC_DIO_GAT_VCC, /* internal high logic level */
+ AMPLC_DIO_GAT_GND, /* internal low logic level */
+ AMPLC_DIO_GAT_GATN, /* per channel external gate input */
+ AMPLC_DIO_GAT_NOUTNM2, /* negated output of counter channel
+ minus 2 (for channels 0 or 1,
+ channel minus 2 is channel 1 or 2 on
+ the preceding counter subdevice, for
+ the first counter subdevice the
+ preceding counter subdevice is the
+ last counter subdevice) */
+ AMPLC_DIO_GAT_RESERVED4,
+ AMPLC_DIO_GAT_RESERVED5,
+ AMPLC_DIO_GAT_RESERVED6,
+ AMPLC_DIO_GAT_RESERVED7
+};
#endif /* _COMEDI_H */
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff