USB: OHCI: remove old SSB OHCI driver
authorHauke Mehrtens <hauke@hauke-m.de>
Thu, 15 Mar 2012 22:49:59 +0000 (23:49 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 18 Apr 2012 20:43:30 +0000 (13:43 -0700)
This is now replaced by the new ssb USB driver, which also supports
devices with an EHCI controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/Kconfig
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-ssb.c [deleted file]

index 2fc5637c4c1f00c676b00f64bab9983ddcc2e88a..00b6fc81c80ed1049faecc332218054cff2fad35 100644 (file)
@@ -373,10 +373,15 @@ config USB_OHCI_HCD_PCI
          If unsure, say Y.
 
 config USB_OHCI_HCD_SSB
-       bool "OHCI support for Broadcom SSB OHCI core"
+       bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
        depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+       select USB_HCD_SSB
+       select USB_OHCI_HCD_PLATFORM
        default n
        ---help---
+         This option is deprecated now and the driver was removed, use
+         USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
+
          Support for the Sonics Silicon Backplane (SSB) attached
          Broadcom USB OHCI core.
 
index 235171f29460574c75030b01b1f45d64dba4d069..e0adf5c0cf556ba2193f373e88080e5163407fa1 100644 (file)
@@ -1080,11 +1080,6 @@ MODULE_LICENSE ("GPL");
 #define PS3_SYSTEM_BUS_DRIVER  ps3_ohci_driver
 #endif
 
-#ifdef CONFIG_USB_OHCI_HCD_SSB
-#include "ohci-ssb.c"
-#define SSB_OHCI_DRIVER                ssb_ohci_driver
-#endif
-
 #ifdef CONFIG_MFD_SM501
 #include "ohci-sm501.c"
 #define SM501_OHCI_DRIVER      ohci_hcd_sm501_driver
@@ -1128,8 +1123,7 @@ MODULE_LICENSE ("GPL");
        !defined(SA1111_DRIVER) &&      \
        !defined(PS3_SYSTEM_BUS_DRIVER) && \
        !defined(SM501_OHCI_DRIVER) && \
-       !defined(TMIO_OHCI_DRIVER) && \
-       !defined(SSB_OHCI_DRIVER)
+       !defined(TMIO_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
 
@@ -1195,12 +1189,6 @@ static int __init ohci_hcd_mod_init(void)
                goto error_pci;
 #endif
 
-#ifdef SSB_OHCI_DRIVER
-       retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-       if (retval)
-               goto error_ssb;
-#endif
-
 #ifdef SM501_OHCI_DRIVER
        retval = platform_driver_register(&SM501_OHCI_DRIVER);
        if (retval < 0)
@@ -1224,10 +1212,6 @@ static int __init ohci_hcd_mod_init(void)
        platform_driver_unregister(&SM501_OHCI_DRIVER);
  error_sm501:
 #endif
-#ifdef SSB_OHCI_DRIVER
-       ssb_driver_unregister(&SSB_OHCI_DRIVER);
- error_ssb:
-#endif
 #ifdef PCI_DRIVER
        pci_unregister_driver(&PCI_DRIVER);
  error_pci:
@@ -1275,9 +1259,6 @@ static void __exit ohci_hcd_mod_exit(void)
 #ifdef SM501_OHCI_DRIVER
        platform_driver_unregister(&SM501_OHCI_DRIVER);
 #endif
-#ifdef SSB_OHCI_DRIVER
-       ssb_driver_unregister(&SSB_OHCI_DRIVER);
-#endif
 #ifdef PCI_DRIVER
        pci_unregister_driver(&PCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
deleted file mode 100644 (file)
index 5ba1859..0000000
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Sonics Silicon Backplane
- * Broadcom USB-core OHCI driver
- *
- * Copyright 2007 Michael Buesch <m@bues.ch>
- *
- * Derived from the OHCI-PCI driver
- * Copyright 1999 Roman Weissgaerber
- * Copyright 2000-2002 David Brownell
- * Copyright 1999 Linus Torvalds
- * Copyright 1999 Gregory P. Smith
- *
- * Derived from the USBcore related parts of Broadcom-SB
- * Copyright 2005 Broadcom Corporation
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-#include <linux/ssb/ssb.h>
-
-
-#define SSB_OHCI_TMSLOW_HOSTMODE       (1 << 29)
-
-struct ssb_ohci_device {
-       struct ohci_hcd ohci; /* _must_ be at the beginning. */
-
-       u32 enable_flags;
-};
-
-static inline
-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
-{
-       return (struct ssb_ohci_device *)(hcd->hcd_priv);
-}
-
-
-static int ssb_ohci_reset(struct usb_hcd *hcd)
-{
-       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-       struct ohci_hcd *ohci = &ohcidev->ohci;
-       int err;
-
-       ohci_hcd_init(ohci);
-       err = ohci_init(ohci);
-
-       return err;
-}
-
-static int ssb_ohci_start(struct usb_hcd *hcd)
-{
-       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-       struct ohci_hcd *ohci = &ohcidev->ohci;
-       int err;
-
-       err = ohci_run(ohci);
-       if (err < 0) {
-               ohci_err(ohci, "can't start\n");
-               ohci_stop(hcd);
-       }
-
-       return err;
-}
-
-static const struct hc_driver ssb_ohci_hc_driver = {
-       .description            = "ssb-usb-ohci",
-       .product_desc           = "SSB OHCI Controller",
-       .hcd_priv_size          = sizeof(struct ssb_ohci_device),
-
-       .irq                    = ohci_irq,
-       .flags                  = HCD_MEMORY | HCD_USB11,
-
-       .reset                  = ssb_ohci_reset,
-       .start                  = ssb_ohci_start,
-       .stop                   = ohci_stop,
-       .shutdown               = ohci_shutdown,
-
-       .urb_enqueue            = ohci_urb_enqueue,
-       .urb_dequeue            = ohci_urb_dequeue,
-       .endpoint_disable       = ohci_endpoint_disable,
-
-       .get_frame_number       = ohci_get_frame,
-
-       .hub_status_data        = ohci_hub_status_data,
-       .hub_control            = ohci_hub_control,
-#ifdef CONFIG_PM
-       .bus_suspend            = ohci_bus_suspend,
-       .bus_resume             = ohci_bus_resume,
-#endif
-
-       .start_port_reset       = ohci_start_port_reset,
-};
-
-static void ssb_ohci_detach(struct ssb_device *dev)
-{
-       struct usb_hcd *hcd = ssb_get_drvdata(dev);
-
-       if (hcd->driver->shutdown)
-               hcd->driver->shutdown(hcd);
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-       ssb_device_disable(dev, 0);
-}
-
-static int ssb_ohci_attach(struct ssb_device *dev)
-{
-       struct ssb_ohci_device *ohcidev;
-       struct usb_hcd *hcd;
-       int err = -ENOMEM;
-       u32 tmp, flags = 0;
-
-       if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-           dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-               return -EOPNOTSUPP;
-
-       if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-               /* Put the device into host-mode. */
-               flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-               ssb_device_enable(dev, flags);
-       } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-               /*
-                * USB 2.0 special considerations:
-                *
-                * In addition to the standard SSB reset sequence, the Host
-                * Control Register must be programmed to bring the USB core
-                * and various phy components out of reset.
-                */
-               ssb_device_enable(dev, 0);
-               ssb_write32(dev, 0x200, 0x7ff);
-
-               /* Change Flush control reg */
-               tmp = ssb_read32(dev, 0x400);
-               tmp &= ~8;
-               ssb_write32(dev, 0x400, tmp);
-               tmp = ssb_read32(dev, 0x400);
-
-               /* Change Shim control reg */
-               tmp = ssb_read32(dev, 0x304);
-               tmp &= ~0x100;
-               ssb_write32(dev, 0x304, tmp);
-               tmp = ssb_read32(dev, 0x304);
-
-               udelay(1);
-
-               /* Work around for 5354 failures */
-               if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-                       /* Change syn01 reg */
-                       tmp = 0x00fe00fe;
-                       ssb_write32(dev, 0x894, tmp);
-
-                       /* Change syn03 reg */
-                       tmp = ssb_read32(dev, 0x89c);
-                       tmp |= 0x1;
-                       ssb_write32(dev, 0x89c, tmp);
-               }
-       } else
-               ssb_device_enable(dev, 0);
-
-       hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-                       dev_name(dev->dev));
-       if (!hcd)
-               goto err_dev_disable;
-       ohcidev = hcd_to_ssb_ohci(hcd);
-       ohcidev->enable_flags = flags;
-
-       tmp = ssb_read32(dev, SSB_ADMATCH0);
-       hcd->rsrc_start = ssb_admatch_base(tmp);
-       hcd->rsrc_len = ssb_admatch_size(tmp);
-       hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-       if (!hcd->regs)
-               goto err_put_hcd;
-       err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
-       if (err)
-               goto err_iounmap;
-
-       ssb_set_drvdata(dev, hcd);
-
-       return err;
-
-err_iounmap:
-       iounmap(hcd->regs);
-err_put_hcd:
-       usb_put_hcd(hcd);
-err_dev_disable:
-       ssb_device_disable(dev, flags);
-       return err;
-}
-
-static int ssb_ohci_probe(struct ssb_device *dev,
-               const struct ssb_device_id *id)
-{
-       int err;
-       u16 chipid_top;
-
-       /* USBcores are only connected on embedded devices. */
-       chipid_top = (dev->bus->chip_id & 0xFF00);
-       if (chipid_top != 0x4700 && chipid_top != 0x5300)
-               return -ENODEV;
-
-       /* TODO: Probably need checks here; is the core connected? */
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       /* We currently always attach SSB_DEV_USB11_HOSTDEV
-        * as HOST OHCI. If we want to attach it as Client device,
-        * we must branch here and call into the (yet to
-        * be written) Client mode driver. Same for remove(). */
-
-       err = ssb_ohci_attach(dev);
-
-       return err;
-}
-
-static void ssb_ohci_remove(struct ssb_device *dev)
-{
-       ssb_ohci_detach(dev);
-}
-
-#ifdef CONFIG_PM
-
-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
-{
-       ssb_device_disable(dev, 0);
-
-       return 0;
-}
-
-static int ssb_ohci_resume(struct ssb_device *dev)
-{
-       struct usb_hcd *hcd = ssb_get_drvdata(dev);
-       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-
-       ssb_device_enable(dev, ohcidev->enable_flags);
-
-       ohci_finish_controller_resume(hcd);
-       return 0;
-}
-
-#else /* !CONFIG_PM */
-#define ssb_ohci_suspend       NULL
-#define ssb_ohci_resume        NULL
-#endif /* CONFIG_PM */
-
-static const struct ssb_device_id ssb_ohci_table[] = {
-       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-       SSB_DEVTABLE_END
-};
-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
-
-static struct ssb_driver ssb_ohci_driver = {
-       .name           = KBUILD_MODNAME,
-       .id_table       = ssb_ohci_table,
-       .probe          = ssb_ohci_probe,
-       .remove         = ssb_ohci_remove,
-       .suspend        = ssb_ohci_suspend,
-       .resume         = ssb_ohci_resume,
-};