[media] tvp5150: convert it to use dev_foo() macros
authorMauro Carvalho Chehab <mchehab@s-opensource.com>
Wed, 16 Nov 2016 10:58:05 +0000 (08:58 -0200)
committerMauro Carvalho Chehab <mchehab@s-opensource.com>
Fri, 18 Nov 2016 12:10:07 +0000 (10:10 -0200)
Instead of using v4l_foo(), use the dev_foo() macros, as
most modern media drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/i2c/tvp5150.c
drivers/media/usb/em28xx/em28xx-audio.c

index 4740da39d6988a19574d8f040bb20038ab4b6f67..569eb7c0968ab6f7b641886a541a8b29cb5c6c42 100644 (file)
@@ -74,11 +74,11 @@ static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
 
        rc = i2c_smbus_read_byte_data(c, addr);
        if (rc < 0) {
-               v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
+               dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
                return rc;
        }
 
-       v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, rc);
+       dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: read 0x%02x = %02x\n", addr, rc);
 
        return rc;
 }
@@ -89,10 +89,10 @@ static int tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
        struct i2c_client *c = v4l2_get_subdevdata(sd);
        int rc;
 
-       v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", addr, value);
+       dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: writing %02x %02x\n", addr, value);
        rc = i2c_smbus_write_byte_data(c, addr, value);
        if (rc < 0)
-               v4l2_err(sd, "i2c i/o error: rc == %d\n", rc);
+               dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
 
        return rc;
 }
@@ -280,8 +280,7 @@ static inline void tvp5150_selmux(struct v4l2_subdev *sd)
                break;
        }
 
-       v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
-                       "=> tvp5150 input=%i, opmode=%i\n",
+       dev_dbg_lvl(sd->dev, 1, debug, "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
                        decoder->input, decoder->output,
                        input, opmode);
 
@@ -293,7 +292,7 @@ static inline void tvp5150_selmux(struct v4l2_subdev *sd)
         */
        val = tvp5150_read(sd, TVP5150_MISC_CTL);
        if (val < 0) {
-               v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
+               dev_err(sd->dev, "%s: failed with error = %d\n", __func__, val);
                return;
        }
 
@@ -611,7 +610,7 @@ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
        const struct i2c_vbi_ram_value *regs = vbi_ram_default;
        int line;
 
-       v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
+       dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
        memset(cap, 0, sizeof *cap);
 
        while (regs->reg != (u16)-1 ) {
@@ -649,7 +648,7 @@ static int tvp5150_set_vbi(struct v4l2_subdev *sd,
        int pos=0;
 
        if (std == V4L2_STD_ALL) {
-               v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
+               dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
                return 0;
        } else if (std & V4L2_STD_625_50) {
                /* Don't follow NTSC Line number convension */
@@ -697,7 +696,7 @@ static int tvp5150_get_vbi(struct v4l2_subdev *sd,
        int i, ret = 0;
 
        if (std == V4L2_STD_ALL) {
-               v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
+               dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
                return 0;
        } else if (std & V4L2_STD_625_50) {
                /* Don't follow NTSC Line number convension */
@@ -712,7 +711,7 @@ static int tvp5150_get_vbi(struct v4l2_subdev *sd,
        for (i = 0; i <= 1; i++) {
                ret = tvp5150_read(sd, reg + i);
                if (ret < 0) {
-                       v4l2_err(sd, "%s: failed with error = %d\n",
+                       dev_err(sd->dev, "%s: failed with error = %d\n",
                                 __func__, ret);
                        return 0;
                }
@@ -749,7 +748,7 @@ static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
                        fmt = VIDEO_STD_SECAM_BIT;
        }
 
-       v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
+       dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt);
        tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
        return 0;
 }
@@ -866,7 +865,7 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
        f->field = V4L2_FIELD_ALTERNATE;
        f->colorspace = V4L2_COLORSPACE_SMPTE170M;
 
-       v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
+       dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width,
                        f->height);
        return 0;
 }
@@ -884,7 +883,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
            sel->target != V4L2_SEL_TGT_CROP)
                return -EINVAL;
 
-       v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
+       dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
                __func__, rect.left, rect.top, rect.width, rect.height);
 
        /* tvp5150 has some special limits */
@@ -1148,7 +1147,7 @@ static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *
 
        res = tvp5150_read(sd, reg->reg & 0xff);
        if (res < 0) {
-               v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
+               dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res);
                return res;
        }
 
@@ -1288,21 +1287,21 @@ static int tvp5150_detect_version(struct tvp5150 *core)
        core->dev_id = (regs[0] << 8) | regs[1];
        core->rom_ver = (regs[2] << 8) | regs[3];
 
-       v4l2_info(sd, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
+       dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
                  core->dev_id, regs[2], regs[3], c->addr << 1,
                  c->adapter->name);
 
        if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
-               v4l2_info(sd, "tvp5150a detected.\n");
+               dev_info(sd->dev, "tvp5150a detected.\n");
        } else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
-               v4l2_info(sd, "tvp5150am1 detected.\n");
+               dev_info(sd->dev, "tvp5150am1 detected.\n");
 
                /* ITU-T BT.656.4 timing */
                tvp5150_write(sd, TVP5150_REV_SELECT, 0);
        } else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
-               v4l2_info(sd, "tvp5151 detected.\n");
+               dev_info(sd->dev, "tvp5151 detected.\n");
        } else {
-               v4l2_info(sd, "*** unknown tvp%04x chip detected.\n",
+               dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n",
                          core->dev_id);
        }
 
@@ -1381,7 +1380,7 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
        for_each_available_child_of_node(connectors, child) {
                ret = of_property_read_u32(child, "input", &input_type);
                if (ret) {
-                       v4l2_err(&decoder->sd,
+                       dev_err(decoder->sd.dev,
                                 "missing type property in node %s\n",
                                 child->name);
                        goto err_connector;
@@ -1396,7 +1395,7 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
 
                /* Each input connector can only be defined once */
                if (input->name) {
-                       v4l2_err(&decoder->sd,
+                       dev_err(decoder->sd.dev,
                                 "input %s with same type already exists\n",
                                 input->name);
                        ret = -EINVAL;
@@ -1417,7 +1416,7 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
 
                ret = of_property_read_string(child, "label", &name);
                if (ret < 0) {
-                       v4l2_err(&decoder->sd,
+                       dev_err(decoder->sd.dev,
                                 "missing label property in node %s\n",
                                 child->name);
                        goto err_connector;
@@ -1465,7 +1464,7 @@ static int tvp5150_probe(struct i2c_client *c,
        if (IS_ENABLED(CONFIG_OF) && np) {
                res = tvp5150_parse_dt(core, np);
                if (res) {
-                       v4l2_err(sd, "DT parsing error: %d\n", res);
+                       dev_err(sd->dev, "DT parsing error: %d\n", res);
                        return res;
                }
        } else {
@@ -1549,7 +1548,7 @@ static int tvp5150_remove(struct i2c_client *c)
        struct v4l2_subdev *sd = i2c_get_clientdata(c);
        struct tvp5150 *decoder = to_tvp5150(sd);
 
-       v4l2_dbg(1, debug, sd,
+       dev_dbg_lvl(sd->dev, 1, debug,
                "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
                c->addr << 1);
 
index cd2545ca5e39f2df8c9b924fd16be7e7f7a03ca7..7060e5146e319ddc52b94f49483b370803447361 100644 (file)
@@ -259,8 +259,7 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream)
        int nonblock, ret = 0;
 
        if (!dev) {
-               dev_err(&dev->udev->dev,
-                       "BUG: em28xx can't find device struct. Can't proceed with open\n");
+               pr_err("em28xx-audio: BUG: em28xx can't find device struct. Can't proceed with open\n");
                return -ENODEV;
        }