arm64: dts: renesas: Extract common ULCB board support

The Renesas ULCB development board can be equipped with either an R-Car
H3 or M3-W SiP, which are pin-compatible.  Both boards use different
DTBs.

Reduce duplication by extracting common ULCB board support into its own
.dtsi file.  References to SoC-specific clocks are handled through cpp
definitions.  Sort device nodes while at it.

For H3ULCB, there are no functional changes.

For M3ULCB, the following new devices are now described in DT:
  - External audio, CAN, and PCIe clocks,
  - CS2000 clock generator,
  - AK4613 Audio Codec.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 3574965e074718d84f025b0e143e2eed2b3d0fed..a1fbf0ab8ad8e42592368705f66d451a757d14cb 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -9,24 +9,16 @@
  * kind, whether express or implied.
  */
 
+#define CPG_AUDIO_CLK_I                R8A7795_CLK_S0D4
+
 /dts-v1/;
 #include "r8a7795.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
 
 / {
        model = "Renesas H3ULCB board based on r8a7795";
        compatible = "renesas,h3ulcb", "renesas,r8a7795";
 
-       aliases {
-               serial0 = &scif2;
-               ethernet0 = &avb;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
        memory@48000000 {
                device_type = "memory";
                /* first 128MB is reserved for secure area. */
@@ -47,331 +39,4 @@
                device_type = "memory";
                reg = <0x7 0x00000000 0x0 0x40000000>;
        };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led5 {
-                       gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-               };
-               led6 {
-                       gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keyboard {
-               compatible = "gpio-keys";
-
-               key-1 {
-                       linux,code = <KEY_1>;
-                       label = "SW3";
-                       wakeup-source;
-                       debounce-interval = <20>;
-                       gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       x12_clk: x12 {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <24576000>;
-       };
-
-       reg_1p8v: regulator0 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-1.8V";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       reg_3p3v: regulator1 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-3.3V";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       vcc_sdhi0: regulator-vcc-sdhi0 {
-               compatible = "regulator-fixed";
-
-               regulator-name = "SDHI0 Vcc";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-
-               gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-
-       vccq_sdhi0: regulator-vccq-sdhi0 {
-               compatible = "regulator-gpio";
-
-               regulator-name = "SDHI0 VccQ";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-
-               gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-               gpios-states = <1>;
-               states = <3300000 1
-                         1800000 0>;
-       };
-
-       audio_clkout: audio-clkout {
-               /*
-                * This is same as <&rcar_sound 0>
-                * but needed to avoid cs2000/rcar_sound probe dead-lock
-                */
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <11289600>;
-       };
-
-       rsnd_ak4613: sound {
-               compatible = "simple-audio-card";
-
-               simple-audio-card,format = "left_j";
-               simple-audio-card,bitclock-master = <&sndcpu>;
-               simple-audio-card,frame-master = <&sndcpu>;
-
-               sndcpu: simple-audio-card,cpu {
-                       sound-dai = <&rcar_sound>;
-               };
-
-               sndcodec: simple-audio-card,codec {
-                       sound-dai = <&ak4613>;
-               };
-       };
-};
-
-&extal_clk {
-       clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-       clock-frequency = <32768>;
-};
-
-&pfc {
-       pinctrl-0 = <&scif_clk_pins>;
-       pinctrl-names = "default";
-
-       scif2_pins: scif2 {
-               groups = "scif2_data_a";
-               function = "scif2";
-       };
-
-       scif_clk_pins: scif_clk {
-               groups = "scif_clk_a";
-               function = "scif_clk";
-       };
-
-       i2c2_pins: i2c2 {
-               groups = "i2c2_a";
-               function = "i2c2";
-       };
-
-       avb_pins: avb {
-               groups = "avb_mdc";
-               function = "avb";
-       };
-
-       sdhi0_pins: sd0 {
-               groups = "sdhi0_data4", "sdhi0_ctrl";
-               function = "sdhi0";
-               power-source = <3300>;
-       };
-
-       sdhi0_pins_uhs: sd0_uhs {
-               groups = "sdhi0_data4", "sdhi0_ctrl";
-               function = "sdhi0";
-               power-source = <1800>;
-       };
-
-       sdhi2_pins: sd2 {
-               groups = "sdhi2_data8", "sdhi2_ctrl";
-               function = "sdhi2";
-               power-source = <3300>;
-       };
-
-       sdhi2_pins_uhs: sd2_uhs {
-               groups = "sdhi2_data8", "sdhi2_ctrl";
-               function = "sdhi2";
-               power-source = <1800>;
-       };
-
-       sound_pins: sound {
-               groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-               function = "ssi";
-       };
-
-       sound_clk_pins: sound-clk {
-               groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
-                        "audio_clkout_a", "audio_clkout3_a";
-               function = "audio_clk";
-       };
-
-       usb1_pins: usb1 {
-               groups = "usb1";
-               function = "usb1";
-       };
-};
-
-&scif2 {
-       pinctrl-0 = <&scif2_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&scif_clk {
-       clock-frequency = <14745600>;
-};
-
-&i2c2 {
-       pinctrl-0 = <&i2c2_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-
-       clock-frequency = <100000>;
-
-       ak4613: codec@10 {
-               compatible = "asahi-kasei,ak4613";
-               #sound-dai-cells = <0>;
-               reg = <0x10>;
-               clocks = <&rcar_sound 3>;
-
-               asahi-kasei,in1-single-end;
-               asahi-kasei,in2-single-end;
-               asahi-kasei,out1-single-end;
-               asahi-kasei,out2-single-end;
-               asahi-kasei,out3-single-end;
-               asahi-kasei,out4-single-end;
-               asahi-kasei,out5-single-end;
-               asahi-kasei,out6-single-end;
-       };
-
-       cs2000: clk-multiplier@4f {
-               #clock-cells = <0>;
-               compatible = "cirrus,cs2000-cp";
-               reg = <0x4f>;
-               clocks = <&audio_clkout>, <&x12_clk>;
-               clock-names = "clk_in", "ref_clk";
-
-               assigned-clocks = <&cs2000>;
-               assigned-clock-rates = <24576000>; /* 1/1 divide */
-       };
-};
-
-&rcar_sound {
-       pinctrl-0 = <&sound_pins &sound_clk_pins>;
-       pinctrl-names = "default";
-
-       /* Single DAI */
-       #sound-dai-cells = <0>;
-
-       /* audio_clkout0/1/2/3 */
-       #clock-cells = <1>;
-       clock-frequency = <11289600>;
-
-       status = "okay";
-
-       /* update <audio_clk_b> to <cs2000> */
-       clocks = <&cpg CPG_MOD 1005>,
-                <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-                <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-                <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-                <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-                <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-                <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-                <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-                <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-                <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-                <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-                <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-                <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-                <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-                <&audio_clk_a>, <&cs2000>,
-                <&audio_clk_c>,
-                <&cpg CPG_CORE R8A7795_CLK_S0D4>;
-
-       rcar_sound,dai {
-               dai0 {
-                       playback = <&ssi0 &src0 &dvc0>;
-                       capture  = <&ssi1 &src1 &dvc1>;
-               };
-       };
-};
-
-&sdhi0 {
-       pinctrl-0 = <&sdhi0_pins>;
-       pinctrl-1 = <&sdhi0_pins_uhs>;
-       pinctrl-names = "default", "state_uhs";
-
-       vmmc-supply = <&vcc_sdhi0>;
-       vqmmc-supply = <&vccq_sdhi0>;
-       cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-       bus-width = <4>;
-       sd-uhs-sdr50;
-       status = "okay";
-};
-
-&sdhi2 {
-       /* used for on-board 8bit eMMC */
-       pinctrl-0 = <&sdhi2_pins>;
-       pinctrl-1 = <&sdhi2_pins_uhs>;
-       pinctrl-names = "default", "state_uhs";
-
-       vmmc-supply = <&reg_3p3v>;
-       vqmmc-supply = <&reg_1p8v>;
-       bus-width = <8>;
-       mmc-hs200-1_8v;
-       non-removable;
-       status = "okay";
-};
-
-&ssi1 {
-       shared-pin;
-};
-
-&wdt0 {
-       timeout-sec = <60>;
-       status = "okay";
-};
-
-&audio_clk_a {
-       clock-frequency = <22579200>;
-};
-
-&avb {
-       pinctrl-0 = <&avb_pins>;
-       pinctrl-names = "default";
-       renesas,no-ether-link;
-       phy-handle = <&phy0>;
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               rxc-skew-ps = <1500>;
-               reg = <0>;
-               interrupt-parent = <&gpio2>;
-               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-       };
-};
-
-&usb2_phy1 {
-       pinctrl-0 = <&usb1_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&ehci1 {
-       status = "okay";
-};
-
-&ohci1 {
-       status = "okay";
 };

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 440d93e8388df3ede45109d7f51ac696da06e477..38b58b7fca4bf0e9a309a1f9a27f91cb26d9e785 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -9,24 +9,16 @@
  * kind, whether express or implied.
  */
 
+#define CPG_AUDIO_CLK_I                R8A7796_CLK_S0D4
+
 /dts-v1/;
 #include "r8a7796.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ulcb.dtsi"
 
 / {
        model = "Renesas M3ULCB board based on r8a7796";
        compatible = "renesas,m3ulcb", "renesas,r8a7796";
 
-       aliases {
-               serial0 = &scif2;
-               ethernet0 = &avb;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
        memory@48000000 {
                device_type = "memory";
                /* first 128MB is reserved for secure area. */
@@ -37,191 +29,4 @@
                device_type = "memory";
                reg = <0x6 0x00000000 0x0 0x40000000>;
        };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led5 {
-                       gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-               };
-               led6 {
-                       gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keyboard {
-               compatible = "gpio-keys";
-
-               key-1 {
-                       linux,code = <KEY_1>;
-                       label = "SW3";
-                       wakeup-source;
-                       debounce-interval = <20>;
-                       gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       reg_1p8v: regulator0 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-1.8V";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       reg_3p3v: regulator1 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-3.3V";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       vcc_sdhi0: regulator-vcc-sdhi0 {
-               compatible = "regulator-fixed";
-
-               regulator-name = "SDHI0 Vcc";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-
-               gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-
-       vccq_sdhi0: regulator-vccq-sdhi0 {
-               compatible = "regulator-gpio";
-
-               regulator-name = "SDHI0 VccQ";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-
-               gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-               gpios-states = <1>;
-               states = <3300000 1
-                         1800000 0>;
-       };
-};
-
-&extal_clk {
-       clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-       clock-frequency = <32768>;
-};
-
-&pfc {
-       pinctrl-0 = <&scif_clk_pins>;
-       pinctrl-names = "default";
-
-       avb_pins: avb {
-               groups = "avb_mdc";
-               function = "avb";
-       };
-
-       scif2_pins: scif2 {
-               groups = "scif2_data_a";
-               function = "scif2";
-       };
-
-       scif_clk_pins: scif_clk {
-               groups = "scif_clk_a";
-               function = "scif_clk";
-       };
-
-       i2c2_pins: i2c2 {
-               groups = "i2c2_a";
-               function = "i2c2";
-       };
-
-       sdhi0_pins: sd0 {
-               groups = "sdhi0_data4", "sdhi0_ctrl";
-               function = "sdhi0";
-               power-source = <3300>;
-       };
-
-       sdhi0_pins_uhs: sd0_uhs {
-               groups = "sdhi0_data4", "sdhi0_ctrl";
-               function = "sdhi0";
-               power-source = <1800>;
-       };
-
-       sdhi2_pins: sd2 {
-               groups = "sdhi2_data8", "sdhi2_ctrl";
-               function = "sdhi2";
-               power-source = <3300>;
-       };
-
-       sdhi2_pins_uhs: sd2_uhs {
-               groups = "sdhi2_data8", "sdhi2_ctrl";
-               function = "sdhi2";
-               power-source = <1800>;
-       };
-};
-
-&avb {
-       pinctrl-0 = <&avb_pins>;
-       pinctrl-names = "default";
-       renesas,no-ether-link;
-       phy-handle = <&phy0>;
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               rxc-skew-ps = <1500>;
-               reg = <0>;
-               interrupt-parent = <&gpio2>;
-               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-       };
-};
-
-&sdhi0 {
-       pinctrl-0 = <&sdhi0_pins>;
-       pinctrl-1 = <&sdhi0_pins_uhs>;
-       pinctrl-names = "default", "state_uhs";
-
-       vmmc-supply = <&vcc_sdhi0>;
-       vqmmc-supply = <&vccq_sdhi0>;
-       cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-       bus-width = <4>;
-       sd-uhs-sdr50;
-       status = "okay";
-};
-
-&sdhi2 {
-       /* used for on-board 8bit eMMC */
-       pinctrl-0 = <&sdhi2_pins>;
-       pinctrl-1 = <&sdhi2_pins_uhs>;
-       pinctrl-names = "default", "state_uhs";
-
-       vmmc-supply = <&reg_3p3v>;
-       vqmmc-supply = <&reg_1p8v>;
-       bus-width = <8>;
-       mmc-hs200-1_8v;
-       non-removable;
-       status = "okay";
-};
-
-&scif2 {
-       pinctrl-0 = <&scif2_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&scif_clk {
-       clock-frequency = <14745600>;
-};
-
-&i2c2 {
-       pinctrl-0 = <&i2c2_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&wdt0 {
-       timeout-sec = <60>;
-       status = "okay";
 };

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
new file mode 100644 (file)
index 0000000..2bc7ceb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -0,0 +1,353 @@
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Renesas R-Car Gen3 ULCB board";
+
+       aliases {
+               serial0 = &scif2;
+               ethernet0 = &avb;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       audio_clkout: audio-clkout {
+               /*
+                * This is same as <&rcar_sound 0>
+                * but needed to avoid cs2000/rcar_sound probe dead-lock
+                */
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <11289600>;
+       };
+
+       keyboard {
+               compatible = "gpio-keys";
+
+               key-1 {
+                       linux,code = <KEY_1>;
+                       label = "SW3";
+                       wakeup-source;
+                       debounce-interval = <20>;
+                       gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led5 {
+                       gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+               };
+               led6 {
+                       gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       reg_1p8v: regulator0 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator1 {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       rsnd_ak4613: sound {
+               compatible = "simple-audio-card";
+
+               simple-audio-card,format = "left_j";
+               simple-audio-card,bitclock-master = <&sndcpu>;
+               simple-audio-card,frame-master = <&sndcpu>;
+
+               sndcpu: simple-audio-card,cpu {
+                       sound-dai = <&rcar_sound>;
+               };
+
+               sndcodec: simple-audio-card,codec {
+                       sound-dai = <&ak4613>;
+               };
+       };
+
+       vcc_sdhi0: regulator-vcc-sdhi0 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       vccq_sdhi0: regulator-vccq-sdhi0 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "SDHI0 VccQ";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+               gpios-states = <1>;
+               states = <3300000 1
+                         1800000 0>;
+       };
+
+       x12_clk: x12 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <24576000>;
+       };
+};
+
+&audio_clk_a {
+       clock-frequency = <22579200>;
+};
+
+&avb {
+       pinctrl-0 = <&avb_pins>;
+       pinctrl-names = "default";
+       renesas,no-ether-link;
+       phy-handle = <&phy0>;
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               rxc-skew-ps = <1500>;
+               reg = <0>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&extal_clk {
+       clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+       clock-frequency = <32768>;
+};
+
+&i2c2 {
+       pinctrl-0 = <&i2c2_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+
+       clock-frequency = <100000>;
+
+       ak4613: codec@10 {
+               compatible = "asahi-kasei,ak4613";
+               #sound-dai-cells = <0>;
+               reg = <0x10>;
+               clocks = <&rcar_sound 3>;
+
+               asahi-kasei,in1-single-end;
+               asahi-kasei,in2-single-end;
+               asahi-kasei,out1-single-end;
+               asahi-kasei,out2-single-end;
+               asahi-kasei,out3-single-end;
+               asahi-kasei,out4-single-end;
+               asahi-kasei,out5-single-end;
+               asahi-kasei,out6-single-end;
+       };
+
+       cs2000: clk-multiplier@4f {
+               #clock-cells = <0>;
+               compatible = "cirrus,cs2000-cp";
+               reg = <0x4f>;
+               clocks = <&audio_clkout>, <&x12_clk>;
+               clock-names = "clk_in", "ref_clk";
+
+               assigned-clocks = <&cs2000>;
+               assigned-clock-rates = <24576000>; /* 1/1 divide */
+       };
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&pfc {
+       pinctrl-0 = <&scif_clk_pins>;
+       pinctrl-names = "default";
+
+       avb_pins: avb {
+               groups = "avb_mdc";
+               function = "avb";
+       };
+
+       i2c2_pins: i2c2 {
+               groups = "i2c2_a";
+               function = "i2c2";
+       };
+
+       scif2_pins: scif2 {
+               groups = "scif2_data_a";
+               function = "scif2";
+       };
+
+       scif_clk_pins: scif_clk {
+               groups = "scif_clk_a";
+               function = "scif_clk";
+       };
+
+       sdhi0_pins: sd0 {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <3300>;
+       };
+
+       sdhi0_pins_uhs: sd0_uhs {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <1800>;
+       };
+
+       sdhi2_pins: sd2 {
+               groups = "sdhi2_data8", "sdhi2_ctrl";
+               function = "sdhi2";
+               power-source = <3300>;
+       };
+
+       sdhi2_pins_uhs: sd2_uhs {
+               groups = "sdhi2_data8", "sdhi2_ctrl";
+               function = "sdhi2";
+               power-source = <1800>;
+       };
+
+       sound_pins: sound {
+               groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+               function = "ssi";
+       };
+
+       sound_clk_pins: sound-clk {
+               groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+                        "audio_clkout_a", "audio_clkout3_a";
+               function = "audio_clk";
+       };
+
+       usb1_pins: usb1 {
+               groups = "usb1";
+               function = "usb1";
+       };
+};
+
+&rcar_sound {
+       pinctrl-0 = <&sound_pins &sound_clk_pins>;
+       pinctrl-names = "default";
+
+       /* Single DAI */
+       #sound-dai-cells = <0>;
+
+       /* audio_clkout0/1/2/3 */
+       #clock-cells = <1>;
+       clock-frequency = <11289600>;
+
+       status = "okay";
+
+       /* update <audio_clk_b> to <cs2000> */
+       clocks = <&cpg CPG_MOD 1005>,
+                <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+                <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+                <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+                <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+                <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+                <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+                <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+                <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+                <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+                <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+                <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+                <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+                <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+                <&audio_clk_a>, <&cs2000>,
+                <&audio_clk_c>,
+                <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+       rcar_sound,dai {
+               dai0 {
+                       playback = <&ssi0 &src0 &dvc0>;
+                       capture  = <&ssi1 &src1 &dvc1>;
+               };
+       };
+};
+
+&scif2 {
+       pinctrl-0 = <&scif2_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&scif_clk {
+       clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-1 = <&sdhi0_pins_uhs>;
+       pinctrl-names = "default", "state_uhs";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       vqmmc-supply = <&vccq_sdhi0>;
+       cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+       bus-width = <4>;
+       sd-uhs-sdr50;
+       status = "okay";
+};
+
+&sdhi2 {
+       /* used for on-board 8bit eMMC */
+       pinctrl-0 = <&sdhi2_pins>;
+       pinctrl-1 = <&sdhi2_pins_uhs>;
+       pinctrl-names = "default", "state_uhs";
+
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_1p8v>;
+       bus-width = <8>;
+       mmc-hs200-1_8v;
+       non-removable;
+       status = "okay";
+};
+
+&ssi1 {
+       shared-pin;
+};
+
+&usb2_phy1 {
+       pinctrl-0 = <&usb1_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
+&wdt0 {
+       timeout-sec = <60>;
+       status = "okay";
+};