[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver
authorEric Miao <eric.miao@marvell.com>
Sun, 31 Aug 2008 22:56:07 +0000 (06:56 +0800)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Tue, 23 Sep 2008 21:04:38 +0000 (22:04 +0100)
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-pxa/include/mach/littleton.h
arch/arm/mach-pxa/littleton.c

index 79d209b826f46779cb44a43cfcbf6d999a920c3e..5c4e320c1437f4e57d7fa2409183dd48be103692 100644 (file)
@@ -3,4 +3,6 @@
 
 #define LITTLETON_ETH_PHYS     0x30000000
 
+#define LITTLETON_GPIO_LCD_CS  (17)
+
 #endif /* __ASM_ARCH_ZYLONITE_H */
index 58f3402a0375561b2395532169a98058f1630a10..b4d00aba0e3121455f9ce3756df97022d3e6dbda 100644 (file)
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/spi/spi.h>
 #include <linux/smc91x.h>
 
 #include <asm/types.h>
@@ -38,6 +39,7 @@
 #include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
        /* SSP2 */
        GPIO25_SSP2_SCLK,
-       GPIO17_SSP2_FRM,
        GPIO27_SSP2_TXD,
+       GPIO17_GPIO,    /* SFRM as chip-select */
 
        /* Debug Ethernet */
        GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x)                ((0x00000000) | ((x) << 9))
-#define CMD1(x, x1)    ((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2)        ((0x80000000) | ((x) << 18) | 0x20000 |\
-                        ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
-       CMD0(0x1), /* reset */
-       CMD0(0x0), /* nop */
-       CMD0(0x0), /* nop */
-       CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
-       CMD0(0x29),             /* Display ON */
-       CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
-       CMD0(0x11),             /* Sleep out */
-       CMD1(0xB0, 0x16),       /* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
-       CMD0(0x28),             /* Display OFF */
-       CMD2(0xB8, 0x80, 0x02), /* Output Control */
-       CMD0(0x10),             /* Sleep in */
-       CMD1(0xB0, 0x00),       /* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
-       CMD1(0xB0, 0x16),
-       CMD1(0xBC, 0x80),
-       CMD1(0xE1, 0x00),
-       CMD1(0x36, 0x50),
-       CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
-       CMD1(0xB0, 0x16),
-       CMD1(0xBC, 0x81),
-       CMD1(0xE1, 0x00),
-       CMD1(0x36, 0x50),
-       CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
-       CMD1(0xcf, 0x02),       /* Blanking period control (1) */
-       CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
-       CMD1(0xd1, 0x01),       /* CKV timing control on/off */
-       CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
-       CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
-       CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
-       CMD1(0xd5, 0x14),       /* ASW timing control (2) */
-       CMD0(0x21),             /* Invert for normally black display */
-       CMD0(0x29),             /* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
-       CMD1(0xd6, 0x02),       /* Blanking period control (1) */
-       CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
-       CMD1(0xd8, 0x01),       /* CKV timing control on/off */
-       CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
-       CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
-       CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
-       CMD1(0xe0, 0x0a),       /* ASW timing control (2) */
-       CMD0(0x21),             /* Invert for normally black display */
-       CMD0(0x29),             /* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
-       CMD2(0xb8, 0xff, 0xf9), /* Output control */
-       CMD0(0x11),             /* sleep out */
-       CMD1(0xba, 0x01),       /* Display mode (1) */
-       CMD1(0xbb, 0x00),       /* Display mode (2) */
-       CMD1(0x3a, 0x60),       /* Display mode 18-bit RGB */
-       CMD1(0xbf, 0x10),       /* Drive system change control */
-       CMD1(0xb1, 0x56),       /* Booster operation setup */
-       CMD1(0xb2, 0x33),       /* Booster mode setup */
-       CMD1(0xb3, 0x11),       /* Booster frequency setup */
-       CMD1(0xb4, 0x02),       /* Op amp/system clock */
-       CMD1(0xb5, 0x35),       /* VCS voltage */
-       CMD1(0xb6, 0x40),       /* VCOM voltage */
-       CMD1(0xb7, 0x03),       /* External display signal */
-       CMD1(0xbd, 0x00),       /* ASW slew rate */
-       CMD1(0xbe, 0x00),       /* Dummy data for QuadData operation */
-       CMD1(0xc0, 0x11),       /* Sleep out FR count (A) */
-       CMD1(0xc1, 0x11),       /* Sleep out FR count (B) */
-       CMD1(0xc2, 0x11),       /* Sleep out FR count (C) */
-       CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
-       CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
-       CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
-       CMD1(0xc6, 0xc0),       /* Sleep out FR count (G) */
-       CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
-       CMD1(0xc8, 0x44),       /* Gamma 1 fine tuning (2) */
-       CMD1(0xc9, 0x33),       /* Gamma 1 inclination adjustment */
-       CMD1(0xca, 0x00),       /* Gamma 1 blue offset adjustment */
-       CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
-       static int last_nparam = -1;
-
-       /* check if it is necessary to re-config SSP */
-       if (nparam == last_nparam)
-               return;
-
-       ssp_disable(dev);
-       ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
-       last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
-       static int ssp_initialized;
-       static struct ssp_dev ssp2;
-
-       int i;
-
-       if (!ssp_initialized) {
-               ssp_init(&ssp2, 2, SSP_NO_IRQ);
-               ssp_initialized = 1;
-       }
-
-       clk_enable(ssp2.ssp->clk);
-       for (i = 0; i < num; i++, cmd++) {
-               ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
-               ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
-               /* FIXME: ssp_flush() is mandatory here to work */
-               ssp_flush(&ssp2);
-       }
-       clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-       if (on) {
-               ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
-               ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
-               if (var->xres > 240) {
-                       /* VGA */
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
-               } else {
-                       /* QVGA */
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-                       ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
-               }
-       } else
-               ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
        [0] = {
                /* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
        .modes                  = tpo_tdo24mtea1_modes,
        .num_modes              = 2,
        .lcd_conn               = LCD_COLOR_TFT_16BPP,
-       .pxafb_lcd_power        = littleton_lcd_power,
 };
 
 static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+       .num_chipselect         = 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+       gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+       .rx_threshold   = 1,
+       .tx_threshold   = 1,
+       .cs_control     = littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+       {
+               .modalias       = "tdo24m",
+               .max_speed_hz   = 1000000,
+               .bus_num        = 2,
+               .chip_select    = 0,
+               .controller_data= &littleton_tdo24m_chip,
+       },
+};
+
+static void __init littleton_init_spi(void)
+{
+       int err;
+
+       err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+       if (err) {
+               pr_warning("failed to request GPIO for LCS CS\n");
+               return;
+       }
+
+       gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+       pxa2xx_set_spi_info(2, &littleton_spi_info);
+       spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
        /* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
         */
        platform_device_register(&smc91x_device);
 
+       littleton_init_spi();
        littleton_init_lcd();
        littleton_init_keypad();
        littleton_init_nand();