i2c: nomadik: adopt pinctrl support
authorPatrice Chotard <patrice.chotard@stericsson.com>
Thu, 24 Jan 2013 08:47:22 +0000 (09:47 +0100)
committerWolfram Sang <w.sang@pengutronix.de>
Mon, 28 Jan 2013 04:26:43 +0000 (05:26 +0100)
Amend the I2C nomadik pin controller to optionally take a pin control
handle and set the state of the pins to:

- "default" on boot, resume and before performing an i2c transfer
- "idle" after initial default, after resume default, and after each
   i2c xfer
- "sleep" on suspend()

This should make it possible to optimize energy usage for the pins
both for the suspend/resume cycle, and for runtime cases inbetween
I2C transfers.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[wsa: fixed braces on one else-branch]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
drivers/i2c/busses/i2c-nomadik.c

index 8b2ffcf45322d31e88bb57af32e25c0f38cc937f..dd6a6913bd7393bfa1ab1c0307a8cf2e4ba942f5 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/platform_data/i2c-nomadik.h>
 #include <linux/of.h>
 #include <linux/of_i2c.h>
+#include <linux/pinctrl/consumer.h>
 
 #define DRIVER_NAME "nmk-i2c"
 
@@ -147,6 +148,10 @@ struct i2c_nmk_client {
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
+ * @pinctrl: pinctrl handle.
+ * @pins_default: default state for the pins.
+ * @pins_idle: idle state for the pins.
+ * @pins_sleep: sleep state for the pins.
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
@@ -160,6 +165,11 @@ struct nmk_i2c_dev {
        int                             stop;
        struct completion               xfer_complete;
        int                             result;
+       /* Three pin states - default, idle & sleep */
+       struct pinctrl                  *pinctrl;
+       struct pinctrl_state            *pins_default;
+       struct pinctrl_state            *pins_idle;
+       struct pinctrl_state            *pins_sleep;
        bool                            busy;
 };
 
@@ -636,6 +646,15 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
                goto out_clk;
        }
 
+       /* Optionaly enable pins to be muxed in and configured */
+       if (!IS_ERR(dev->pins_default)) {
+               status = pinctrl_select_state(dev->pinctrl,
+                               dev->pins_default);
+               if (status)
+                       dev_err(&dev->adev->dev,
+                               "could not set default pins\n");
+       }
+
        status = init_hw(dev);
        if (status)
                goto out;
@@ -663,6 +682,15 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 out:
        clk_disable_unprepare(dev->clk);
 out_clk:
+       /* Optionally let pins go into idle state */
+       if (!IS_ERR(dev->pins_idle)) {
+               status = pinctrl_select_state(dev->pinctrl,
+                               dev->pins_idle);
+               if (status)
+                       dev_err(&dev->adev->dev,
+                               "could not set pins to idle state\n");
+       }
+
        pm_runtime_put_sync(&dev->adev->dev);
 
        dev->busy = false;
@@ -857,15 +885,41 @@ static int nmk_i2c_suspend(struct device *dev)
 {
        struct amba_device *adev = to_amba_device(dev);
        struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+       int ret;
 
        if (nmk_i2c->busy)
                return -EBUSY;
 
+       if (!IS_ERR(nmk_i2c->pins_sleep)) {
+               ret = pinctrl_select_state(nmk_i2c->pinctrl,
+                               nmk_i2c->pins_sleep);
+               if (ret)
+                       dev_err(dev, "could not set pins to sleep state\n");
+       }
+
        return 0;
 }
 
 static int nmk_i2c_resume(struct device *dev)
 {
+       struct amba_device *adev = to_amba_device(dev);
+       struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+       int ret;
+
+       /* First go to the default state */
+       if (!IS_ERR(nmk_i2c->pins_default)) {
+               ret = pinctrl_select_state(nmk_i2c->pinctrl,
+                               nmk_i2c->pins_default);
+               if (ret)
+                       dev_err(dev, "could not set pins to default state\n");
+       }
+       /* Then let's idle the pins until the next transfer happens */
+       if (!IS_ERR(nmk_i2c->pins_idle)) {
+               ret = pinctrl_select_state(nmk_i2c->pinctrl,
+                               nmk_i2c->pins_idle);
+               if (ret)
+                       dev_err(dev, "could not set pins to idle state\n");
+       }
        return 0;
 }
 #else
@@ -953,6 +1007,40 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
        dev->adev = adev;
        amba_set_drvdata(adev, dev);
 
+       dev->pinctrl = devm_pinctrl_get(&adev->dev);
+       if (IS_ERR(dev->pinctrl)) {
+               ret = PTR_ERR(dev->pinctrl);
+               goto err_pinctrl;
+       }
+
+       dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
+                                                PINCTRL_STATE_DEFAULT);
+       if (IS_ERR(dev->pins_default)) {
+               dev_err(&adev->dev, "could not get default pinstate\n");
+       } else {
+               ret = pinctrl_select_state(dev->pinctrl,
+                                          dev->pins_default);
+               if (ret)
+                       dev_dbg(&adev->dev, "could not set default pinstate\n");
+       }
+
+       dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
+                                             PINCTRL_STATE_IDLE);
+       if (IS_ERR(dev->pins_idle)) {
+               dev_dbg(&adev->dev, "could not get idle pinstate\n");
+       } else {
+               /* If possible, let's go to idle until the first transfer */
+               ret = pinctrl_select_state(dev->pinctrl,
+                                          dev->pins_idle);
+               if (ret)
+                       dev_dbg(&adev->dev, "could not set idle pinstate\n");
+       }
+
+       dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
+                                              PINCTRL_STATE_SLEEP);
+       if (IS_ERR(dev->pins_sleep))
+               dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+
        dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
        if (!dev->virtbase) {
                ret = -ENOMEM;
@@ -1022,6 +1110,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
  err_no_ioremap:
        amba_set_drvdata(adev, NULL);
        kfree(dev);
+ err_pinctrl:
  err_no_mem:
 
        return ret;