/*
* ktime_t:
*
- * On 64-bit CPUs a single 64-bit variable is used to store the hrtimers
+ * A single 64-bit variable is used to store the hrtimers
* internal representation of time values in scalar nanoseconds. The
* design plays out best on 64-bit CPUs, where most conversions are
* NOPs and most arithmetic ktime_t operations are plain arithmetic
* operations.
*
- * On 32-bit CPUs an optimized representation of the timespec structure
- * is used to avoid expensive conversions from and to timespecs. The
- * endian-aware order of the tv struct members is chosen to allow
- * mathematical operations on the tv64 member of the union too, which
- * for certain operations produces better code.
- *
- * For architectures with efficient support for 64/32-bit conversions the
- * plain scalar nanosecond based representation can be selected by the
- * config switch CONFIG_KTIME_SCALAR.
*/
union ktime {
s64 tv64;
-#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR)
- struct {
-# ifdef __BIG_ENDIAN
- s32 sec, nsec;
-# else
- s32 nsec, sec;
-# endif
- } tv;
-#endif
};
typedef union ktime ktime_t; /* Kill this */
-/*
- * ktime_t definitions when using the 64-bit scalar representation:
- */
-
-#if (BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)
-
/**
* ktime_set - Set a ktime_t variable from a seconds/nanoseconds value
* @secs: seconds to set
/* Convert ktime_t to nanoseconds - NOP in the scalar storage format: */
#define ktime_to_ns(kt) ((kt).tv64)
-#else /* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
-
-/*
- * Helper macros/inlines to get the ktime_t math right in the timespec
- * representation. The macros are sometimes ugly - their actual use is
- * pretty okay-ish, given the circumstances. We do all this for
- * performance reasons. The pure scalar nsec_t based code was nice and
- * simple, but created too many 64-bit / 32-bit conversions and divisions.
- *
- * Be especially aware that negative values are represented in a way
- * that the tv.sec field is negative and the tv.nsec field is greater
- * or equal to zero but less than nanoseconds per second. This is the
- * same representation which is used by timespecs.
- *
- * tv.sec < 0 and 0 >= tv.nsec < NSEC_PER_SEC
- */
-
-/* Set a ktime_t variable to a value in sec/nsec representation: */
-static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
-{
- return (ktime_t) { .tv = { .sec = secs, .nsec = nsecs } };
-}
-
-/**
- * ktime_sub - subtract two ktime_t variables
- * @lhs: minuend
- * @rhs: subtrahend
- *
- * Return: The remainder of the subtraction.
- */
-static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
-{
- ktime_t res;
-
- res.tv64 = lhs.tv64 - rhs.tv64;
- if (res.tv.nsec < 0)
- res.tv.nsec += NSEC_PER_SEC;
-
- return res;
-}
-
-/**
- * ktime_add - add two ktime_t variables
- * @add1: addend1
- * @add2: addend2
- *
- * Return: The sum of @add1 and @add2.
- */
-static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
-{
- ktime_t res;
-
- res.tv64 = add1.tv64 + add2.tv64;
- /*
- * performance trick: the (u32) -NSEC gives 0x00000000Fxxxxxxx
- * so we subtract NSEC_PER_SEC and add 1 to the upper 32 bit.
- *
- * it's equivalent to:
- * tv.nsec -= NSEC_PER_SEC
- * tv.sec ++;
- */
- if (res.tv.nsec >= NSEC_PER_SEC)
- res.tv64 += (u32)-NSEC_PER_SEC;
-
- return res;
-}
-
-/**
- * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
- * @kt: addend
- * @nsec: the scalar nsec value to add
- *
- * Return: The sum of @kt and @nsec in ktime_t format.
- */
-extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
-
-/**
- * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
- * @kt: minuend
- * @nsec: the scalar nsec value to subtract
- *
- * Return: The subtraction of @nsec from @kt in ktime_t format.
- */
-extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
-
-/**
- * timespec_to_ktime - convert a timespec to ktime_t format
- * @ts: the timespec variable to convert
- *
- * Return: A ktime_t variable with the converted timespec value.
- */
-static inline ktime_t timespec_to_ktime(const struct timespec ts)
-{
- return (ktime_t) { .tv = { .sec = (s32)ts.tv_sec,
- .nsec = (s32)ts.tv_nsec } };
-}
-
-/**
- * timeval_to_ktime - convert a timeval to ktime_t format
- * @tv: the timeval variable to convert
- *
- * Return: A ktime_t variable with the converted timeval value.
- */
-static inline ktime_t timeval_to_ktime(const struct timeval tv)
-{
- return (ktime_t) { .tv = { .sec = (s32)tv.tv_sec,
- .nsec = (s32)(tv.tv_usec *
- NSEC_PER_USEC) } };
-}
-
-/**
- * ktime_to_timespec - convert a ktime_t variable to timespec format
- * @kt: the ktime_t variable to convert
- *
- * Return: The timespec representation of the ktime value.
- */
-static inline struct timespec ktime_to_timespec(const ktime_t kt)
-{
- return (struct timespec) { .tv_sec = (time_t) kt.tv.sec,
- .tv_nsec = (long) kt.tv.nsec };
-}
-
-/**
- * ktime_to_timeval - convert a ktime_t variable to timeval format
- * @kt: the ktime_t variable to convert
- *
- * Return: The timeval representation of the ktime value.
- */
-static inline struct timeval ktime_to_timeval(const ktime_t kt)
-{
- return (struct timeval) {
- .tv_sec = (time_t) kt.tv.sec,
- .tv_usec = (suseconds_t) (kt.tv.nsec / NSEC_PER_USEC) };
-}
-
-/**
- * ktime_to_ns - convert a ktime_t variable to scalar nanoseconds
- * @kt: the ktime_t variable to convert
- *
- * Return: The scalar nanoseconds representation of @kt.
- */
-static inline s64 ktime_to_ns(const ktime_t kt)
-{
- return (s64) kt.tv.sec * NSEC_PER_SEC + kt.tv.nsec;
-}
-
-#endif /* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
/**
* ktime_equal - Compares two ktime_t variables to see if they are equal
* too large for inlining:
*/
#if BITS_PER_LONG < 64
-# ifndef CONFIG_KTIME_SCALAR
-/**
- * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
- * @kt: addend
- * @nsec: the scalar nsec value to add
- *
- * Returns the sum of kt and nsec in ktime_t format
- */
-ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
-{
- ktime_t tmp;
-
- if (likely(nsec < NSEC_PER_SEC)) {
- tmp.tv64 = nsec;
- } else {
- unsigned long rem = do_div(nsec, NSEC_PER_SEC);
-
- /* Make sure nsec fits into long */
- if (unlikely(nsec > KTIME_SEC_MAX))
- return (ktime_t){ .tv64 = KTIME_MAX };
-
- tmp = ktime_set((long)nsec, rem);
- }
-
- return ktime_add(kt, tmp);
-}
-
-EXPORT_SYMBOL_GPL(ktime_add_ns);
-
-/**
- * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
- * @kt: minuend
- * @nsec: the scalar nsec value to subtract
- *
- * Returns the subtraction of @nsec from @kt in ktime_t format
- */
-ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
-{
- ktime_t tmp;
-
- if (likely(nsec < NSEC_PER_SEC)) {
- tmp.tv64 = nsec;
- } else {
- unsigned long rem = do_div(nsec, NSEC_PER_SEC);
-
- tmp = ktime_set((long)nsec, rem);
- }
-
- return ktime_sub(kt, tmp);
-}
-
-EXPORT_SYMBOL_GPL(ktime_sub_ns);
-# endif /* !CONFIG_KTIME_SCALAR */
-
/*
* Divide a ktime value by a nanosecond value
*/
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff