can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
authorAnilKumar Ch <anilkumar@ti.com>
Thu, 2 Aug 2012 13:13:10 +0000 (18:43 +0530)
committerMarc Kleine-Budde <mkl@pengutronix.de>
Fri, 21 Sep 2012 21:58:47 +0000 (23:58 +0200)
Add device tree support to C_CAN/D_CAN controller and usage details
are added to device tree documentation. Driver was tested on AM335x
EVM.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
For the of binding doc:
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Documentation/devicetree/bindings/net/can/c_can.txt [new file with mode: 0644]
drivers/net/can/c_can/c_can_platform.c

diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt
new file mode 100644 (file)
index 0000000..8f1ae81
--- /dev/null
@@ -0,0 +1,49 @@
+Bosch C_CAN/D_CAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible           : Should be "bosch,c_can" for C_CAN controllers and
+                         "bosch,d_can" for D_CAN controllers.
+- reg                  : physical base address and size of the C_CAN/D_CAN
+                         registers map
+- interrupts           : property with a value describing the interrupt
+                         number
+
+Optional properties:
+- ti,hwmods            : Must be "d_can<n>" or "c_can<n>", n being the
+                         instance number
+
+Note: "ti,hwmods" field is used to fetch the base address and irq
+resources from TI, omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Example:
+
+Step1: SoC common .dtsi file
+
+       dcan1: d_can@481d0000 {
+               compatible = "bosch,d_can";
+               reg = <0x481d0000 0x2000>;
+               interrupts = <55>;
+               interrupt-parent = <&intc>;
+               status = "disabled";
+       };
+
+(or)
+
+       dcan1: d_can@481d0000 {
+               compatible = "bosch,d_can";
+               ti,hwmods = "d_can1";
+               reg = <0x481d0000 0x2000>;
+               interrupts = <55>;
+               interrupt-parent = <&intc>;
+               status = "disabled";
+       };
+
+Step 2: board specific .dts file
+
+       &dcan1 {
+               status = "okay";
+       };
index 5c46d1cc5cf576613abe858cc29baeb046875c1e..d0a66cf298bab322d9140318829b7883ef88ba8a 100644 (file)
@@ -30,6 +30,8 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/can/dev.h>
 
@@ -65,17 +67,52 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
        writew(val, priv->base + 2 * priv->regs[index]);
 }
 
+static struct platform_device_id c_can_id_table[] = {
+       [BOSCH_C_CAN_PLATFORM] = {
+               .name = KBUILD_MODNAME,
+               .driver_data = BOSCH_C_CAN,
+       },
+       [BOSCH_C_CAN] = {
+               .name = "c_can",
+               .driver_data = BOSCH_C_CAN,
+       },
+       [BOSCH_D_CAN] = {
+               .name = "d_can",
+               .driver_data = BOSCH_D_CAN,
+       }, {
+       }
+};
+
+static const struct of_device_id c_can_of_table[] = {
+       { .compatible = "bosch,c_can", .data = &c_can_id_table[BOSCH_C_CAN] },
+       { .compatible = "bosch,d_can", .data = &c_can_id_table[BOSCH_D_CAN] },
+       { /* sentinel */ },
+};
+
 static int __devinit c_can_plat_probe(struct platform_device *pdev)
 {
        int ret;
        void __iomem *addr;
        struct net_device *dev;
        struct c_can_priv *priv;
+       const struct of_device_id *match;
        const struct platform_device_id *id;
        struct resource *mem;
        int irq;
        struct clk *clk;
 
+       if (pdev->dev.of_node) {
+               match = of_match_device(c_can_of_table, &pdev->dev);
+               if (!match) {
+                       dev_err(&pdev->dev, "Failed to find matching dt id\n");
+                       ret = -EINVAL;
+                       goto exit;
+               }
+               id = match->data;
+       } else {
+               id = platform_get_device_id(pdev);
+       }
+
        /* get the appropriate clk */
        clk = clk_get(&pdev->dev, NULL);
        if (IS_ERR(clk)) {
@@ -114,7 +151,6 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
        }
 
        priv = netdev_priv(dev);
-       id = platform_get_device_id(pdev);
        switch (id->driver_data) {
        case BOSCH_C_CAN:
                priv->regs = reg_map_c_can;
@@ -195,26 +231,11 @@ static int __devexit c_can_plat_remove(struct platform_device *pdev)
        return 0;
 }
 
-static const struct platform_device_id c_can_id_table[] = {
-       [BOSCH_C_CAN_PLATFORM] = {
-               .name = KBUILD_MODNAME,
-               .driver_data = BOSCH_C_CAN,
-       },
-       [BOSCH_C_CAN] = {
-               .name = "c_can",
-               .driver_data = BOSCH_C_CAN,
-       },
-       [BOSCH_D_CAN] = {
-               .name = "d_can",
-               .driver_data = BOSCH_D_CAN,
-       }, {
-       }
-};
-
 static struct platform_driver c_can_plat_driver = {
        .driver = {
                .name = KBUILD_MODNAME,
                .owner = THIS_MODULE,
+               .of_match_table = of_match_ptr(c_can_of_table),
        },
        .probe = c_can_plat_probe,
        .remove = __devexit_p(c_can_plat_remove),