memstick: fix setup for JMicron 38x controllers
authorTakashi Iwai <tiwai@suse.de>
Thu, 13 Jan 2011 01:01:01 +0000 (17:01 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 13 Jan 2011 16:03:21 +0000 (08:03 -0800)
This patch corrects the definition of clock values for JMicron 38x
controllers and sets the value properly per interface type.
Also, it adds a check for TPC errors in the interrupt handler.

Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/memstick/host/jmb38x_ms.c

index f2b894cd8b026b49d9bdd1cec95ef55535abde8d..c90ba508225224fc93b2f475341459a0f4cde799 100644 (file)
@@ -61,6 +61,7 @@ struct jmb38x_ms_host {
        struct memstick_request *req;
        unsigned char           cmd_flags;
        unsigned char           io_pos;
+       unsigned char           ifmode;
        unsigned int            io_word[2];
 };
 
@@ -136,15 +137,14 @@ struct jmb38x_ms {
 #define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000
 #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
 
+#define CLOCK_CONTROL_BY_MMIO 0x00000008
 #define CLOCK_CONTROL_40MHZ   0x00000001
-#define CLOCK_CONTROL_50MHZ   0x0000000a
-#define CLOCK_CONTROL_60MHZ   0x00000008
-#define CLOCK_CONTROL_62_5MHZ 0x0000000c
+#define CLOCK_CONTROL_50MHZ   0x00000002
+#define CLOCK_CONTROL_60MHZ   0x00000010
+#define CLOCK_CONTROL_62_5MHZ 0x00000004
 #define CLOCK_CONTROL_OFF     0x00000000
 
 #define PCI_CTL_CLOCK_DLY_ADDR   0x000000b0
-#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
-#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
 
 enum {
        CMD_READY    = 0x01,
@@ -390,8 +390,13 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
 
        if (host->req->data_dir == READ)
                cmd |= TPC_DIR;
-       if (host->req->need_card_int)
-               cmd |= TPC_WAIT_INT;
+
+       if (host->req->need_card_int) {
+               if (host->ifmode == MEMSTICK_SERIAL)
+                       cmd |= TPC_GET_INT;
+               else
+                       cmd |= TPC_WAIT_INT;
+       }
 
        data = host->req->data;
 
@@ -529,7 +534,10 @@ static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
                if (irq_status & INT_STATUS_ANY_ERR) {
                        if (irq_status & INT_STATUS_CRC_ERR)
                                host->req->error = -EILSEQ;
-                       else
+                       else if (irq_status & INT_STATUS_TPC_ERR) {
+                               dev_dbg(&host->chip->pdev->dev, "TPC_ERR\n");
+                               jmb38x_ms_complete_cmd(msh, 0);
+                       } else
                                host->req->error = -ETIME;
                } else {
                        if (host->cmd_flags & DMA_DATA) {
@@ -644,7 +652,6 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
                ndelay(20);
        }
        dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
-       /* return -EIO; */
 
 reset_next:
        writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
@@ -675,7 +682,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 {
        struct jmb38x_ms_host *host = memstick_priv(msh);
        unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
-       unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
+       unsigned int clock_ctl = CLOCK_CONTROL_BY_MMIO, clock_delay = 0;
        int rc = 0;
 
        switch (param) {
@@ -687,9 +694,7 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
 
                        host_ctl = 7;
                        host_ctl |= HOST_CONTROL_POWER_EN
-                                   | HOST_CONTROL_CLOCK_EN
-                                   | HOST_CONTROL_HW_OC_P
-                                   | HOST_CONTROL_TDELAY_EN;
+                                | HOST_CONTROL_CLOCK_EN;
                        writel(host_ctl, host->addr + HOST_CONTROL);
 
                        writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
@@ -712,41 +717,42 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
                        return -EINVAL;
                break;
        case MEMSTICK_INTERFACE:
+               dev_dbg(&host->chip->pdev->dev,
+                       "Set Host Interface Mode to %d\n", value);
+               host_ctl &= ~(HOST_CONTROL_FAST_CLK | HOST_CONTROL_REI |
+                             HOST_CONTROL_REO);
+               host_ctl |= HOST_CONTROL_TDELAY_EN | HOST_CONTROL_HW_OC_P;
                host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
-               pci_read_config_dword(host->chip->pdev,
-                                     PCI_CTL_CLOCK_DLY_ADDR,
-                                     &clock_delay);
-               clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
-                                       : ~PCI_CTL_CLOCK_DLY_MASK_A;
 
                if (value == MEMSTICK_SERIAL) {
-                       host_ctl &= ~HOST_CONTROL_FAST_CLK;
-                       host_ctl &= ~HOST_CONTROL_REO;
                        host_ctl |= HOST_CONTROL_IF_SERIAL
                                    << HOST_CONTROL_IF_SHIFT;
                        host_ctl |= HOST_CONTROL_REI;
-                       clock_ctl = CLOCK_CONTROL_40MHZ;
+                       clock_ctl |= CLOCK_CONTROL_40MHZ;
+                       clock_delay = 0;
                } else if (value == MEMSTICK_PAR4) {
-                       host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
+                       host_ctl |= HOST_CONTROL_FAST_CLK;
                        host_ctl |= HOST_CONTROL_IF_PAR4
                                    << HOST_CONTROL_IF_SHIFT;
-                       host_ctl &= ~HOST_CONTROL_REI;
-                       clock_ctl = CLOCK_CONTROL_40MHZ;
-                       clock_delay |= host->id ? (4 << 12) : (4 << 8);
+                       host_ctl |= HOST_CONTROL_REO;
+                       clock_ctl |= CLOCK_CONTROL_40MHZ;
+                       clock_delay = 4;
                } else if (value == MEMSTICK_PAR8) {
                        host_ctl |= HOST_CONTROL_FAST_CLK;
                        host_ctl |= HOST_CONTROL_IF_PAR8
                                    << HOST_CONTROL_IF_SHIFT;
-                       host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
-                       clock_ctl = CLOCK_CONTROL_50MHZ;
+                       clock_ctl |= CLOCK_CONTROL_50MHZ;
+                       clock_delay = 0;
                } else
                        return -EINVAL;
 
                writel(host_ctl, host->addr + HOST_CONTROL);
+               writel(CLOCK_CONTROL_OFF, host->addr + CLOCK_CONTROL);
                writel(clock_ctl, host->addr + CLOCK_CONTROL);
-               pci_write_config_dword(host->chip->pdev,
-                                      PCI_CTL_CLOCK_DLY_ADDR,
-                                      clock_delay);
+               pci_write_config_byte(host->chip->pdev,
+                                     PCI_CTL_CLOCK_DLY_ADDR + 1,
+                                     clock_delay);
+               host->ifmode = value;
                break;
        };
        return 0;