ARM: dts: mxs: add pin config for LCD sync and clock pins

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 6de63427798d313f1989d0da6cc08483488363c0..7363fded95ee9411d21faf35c4a242ccd5aeb592 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -648,6 +648,19 @@
                                        fsl,pull-up = <0>;
                                };
 
+                               lcdif_sync_pins_a: lcdif-sync@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+                                               0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+                                               0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+                                               0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+
                                can0_pins_a: can0@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <