U6715 16550A serial driver support

UART Features extract from STEricsson U6715 data-sheet (arm926 SoC for mobile phone):
* Fully compatible with industry standard 16C550 and 16C450 from various
manufacturers
* RX and TX 64 byte FIFO reduces CPU interrupts
* Full double buffering
* Modem control signals include CTS, RTS, (and DSR, DTR on UART1 only)
* Automatic baud rate selection
* Manual or automatic RTS/CTS smart hardware flow control
* Programmable serial characteristics:
– Baud rate generation (50 to 3.25M baud)
– 5, 6, 7 or 8-bit characters
– Even, odd or no-parity bit generation and detection
– 1, 1.5 or 2 stop bit generation
* Independent control of transmit, receive, line status, data set interrupts and FIFOs
* Full status-reporting capabilities
* Separate DMA signaling for RX and TX
* Timed interrupt to spread receive interrupt on known duration
* DMA time-out interrupt to allow detection of end of reception
* Carkit pulse coding and decoding compliant with USB carkit control interface [40]

In 16550A auto-configuration, if the fifo size is 64 then it's an U6 16550A port
Add set_termios hook & export serial8250_do_set_termios to change uart
clock following baudrate

Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 355148dc085ebed8fd3a7ec0aee221706395d8bb..24110f6f61e0efae9beddc0d509ba28968e73224 100644 (file)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -300,6 +300,13 @@ static const struct serial8250_config uart_config[] = {
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
                .flags          = UART_CAP_FIFO | UART_CAP_AFE,
        },
+       [PORT_U6_16550A] = {
+               .name           = "U6_16550A",
+               .fifo_size      = 64,
+               .tx_loadsz      = 64,
+               .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+               .flags          = UART_CAP_FIFO | UART_CAP_AFE,
+       },
 };
 
 #if defined(CONFIG_MIPS_ALCHEMY)
@@ -1070,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up)
                DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
        }
        serial_outp(up, UART_IER, iersave);
+
+       /*
+        * We distinguish between 16550A and U6 16550A by counting
+        * how many bytes are in the FIFO.
+        */
+       if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+               up->port.type = PORT_U6_16550A;
+               up->capabilities |= UART_CAP_AFE;
+       }
 }
 
 /*
@@ -2224,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
        return quot;
 }
 
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
-                      struct ktermios *old)
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+                         struct ktermios *old)
 {
        struct uart_8250_port *up = (struct uart_8250_port *)port;
        unsigned char cval, fcr = 0;
@@ -2402,6 +2418,17 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
        if (tty_termios_baud_rate(termios))
                tty_termios_encode_baud_rate(termios, baud, baud);
 }
+EXPORT_SYMBOL(serial8250_do_set_termios);
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+                      struct ktermios *old)
+{
+       if (port->set_termios)
+               port->set_termios(port, termios, old);
+       else
+               serial8250_do_set_termios(port, termios, old);
+}
 
 static void
 serial8250_set_ldisc(struct uart_port *port, int new)
@@ -2982,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
                port.type               = p->type;
                port.serial_in          = p->serial_in;
                port.serial_out         = p->serial_out;
+               port.set_termios        = p->set_termios;
                port.dev                = &dev->dev;
                port.irqflags           |= irqflag;
                ret = serial8250_register_port(&port);
@@ -3145,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port)
                        uart->port.serial_in = port->serial_in;
                if (port->serial_out)
                        uart->port.serial_out = port->serial_out;
+               /*  Possibly override set_termios call */
+               if (port->set_termios)
+                       uart->port.set_termios = port->set_termios;
 
                ret = uart_add_one_port(&serial8250_reg, &uart->port);
                if (ret == 0)

diff --git a/include/linux/serial.h b/include/linux/serial.h
index ef914061511ec833c706a38ddf47cac8ad52d93a..1ebc694a6d521575165ad8443a472e0268e36dff 100644 (file)
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -77,7 +77,8 @@ struct serial_struct {
 #define PORT_16654     11
 #define PORT_16850     12
 #define PORT_RSA       13      /* RSA-DV II/S card */
-#define PORT_MAX       13
+#define PORT_U6_16550A 14
+#define PORT_MAX       14
 
 #define SERIAL_IO_PORT 0
 #define SERIAL_IO_HUB6 1

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index fb46aba11fb5a5a08db30d003a992f8c5e994b1f..7638deaaba653dcfac3bd0e43a2ab8dc5835758a 100644 (file)
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -32,6 +32,9 @@ struct plat_serial8250_port {
        unsigned int    type;           /* If UPF_FIXED_TYPE */
        unsigned int    (*serial_in)(struct uart_port *, int);
        void            (*serial_out)(struct uart_port *, int, int);
+       void            (*set_termios)(struct uart_port *,
+                                      struct ktermios *new,
+                                      struct ktermios *old);
 };
 
 /*
@@ -71,5 +74,7 @@ extern int early_serial_setup(struct uart_port *port);
 extern int serial8250_find_port(struct uart_port *p);
 extern int serial8250_find_port_for_earlycon(void);
 extern int setup_early_serial8250_console(char *cmdline);
+extern void serial8250_do_set_termios(struct uart_port *port,
+               struct ktermios *termios, struct ktermios *old);
 
 #endif

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f8fce351463dc883b19085a4314260551c949ddb..8129ca2d57e3955df394a2a6f9979ed4ac289e11 100644 (file)
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -282,6 +282,9 @@ struct uart_port {
        unsigned char __iomem   *membase;               /* read/write[bwl] */
        unsigned int            (*serial_in)(struct uart_port *, int);
        void                    (*serial_out)(struct uart_port *, int, int);
+       void                    (*set_termios)(struct uart_port *,
+                                              struct ktermios *new,
+                                              struct ktermios *old);
        unsigned int            irq;                    /* irq number */
        unsigned long           irqflags;               /* irq flags  */
        unsigned int            uartclk;                /* base uart clock */