struct comedi_subdevice *s;
int iobase;
int i, n;
-// short value;
-// int subdev_channel = 0;
+/* short value; */
+/* int subdev_channel = 0; */
printk("comedi%d: s526: ", dev->minor);
/* Command are not implemented yet, however they are necessary to
allocate the necessary memory for the comedi_async struct (used
to trigger the GPCT in case of pulsegenerator function */
- //s->do_cmd = s526_gpct_cmd;
- //s->do_cmdtest = s526_gpct_cmdtest;
- //s->cancel = s526_gpct_cancel;
+ /* s->do_cmd = s526_gpct_cmd; */
+ /* s->do_cmdtest = s526_gpct_cmdtest; */
+ /* s->cancel = s526_gpct_cancel; */
s = dev->subdevices + 1;
- //dev->read_subdev=s;
+ /* dev->read_subdev=s; */
/* analog input subdevice */
s->type = COMEDI_SUBD_AI;
/* we support differential */
return 1;
#if 0
- // Example of Counter Application
- //One-shot (software trigger)
- cmReg.reg.coutSource = 0; // out RCAP
- cmReg.reg.coutPolarity = 1; // Polarity inverted
- cmReg.reg.autoLoadResetRcap = 1; // Auto load 0:disabled, 1:enabled
- cmReg.reg.hwCtEnableSource = 3; // NOT RCAP
- cmReg.reg.ctEnableCtrl = 2; // Hardware
- cmReg.reg.clockSource = 2; // Internal
- cmReg.reg.countDir = 1; // Down
- cmReg.reg.countDirCtrl = 1; // Software
- cmReg.reg.outputRegLatchCtrl = 0; // latch on read
- cmReg.reg.preloadRegSel = 0; // PR0
+ /* Example of Counter Application */
+ /* One-shot (software trigger) */
+ cmReg.reg.coutSource = 0; /* out RCAP */
+ cmReg.reg.coutPolarity = 1; /* Polarity inverted */
+ cmReg.reg.autoLoadResetRcap = 1; /* Auto load 0:disabled, 1:enabled */
+ cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */
+ cmReg.reg.ctEnableCtrl = 2; /* Hardware */
+ cmReg.reg.clockSource = 2; /* Internal */
+ cmReg.reg.countDir = 1; /* Down */
+ cmReg.reg.countDirCtrl = 1; /* Software */
+ cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
cmReg.reg.reserved = 0;
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter
- outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0
+ outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
+ outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
- outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset RCAP (fires one-shot)
+ outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */
#else
- // Set Counter Mode Register
- cmReg.reg.coutSource = 0; // out RCAP
- cmReg.reg.coutPolarity = 0; // Polarity inverted
- cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled
- cmReg.reg.hwCtEnableSource = 2; // NOT RCAP
- cmReg.reg.ctEnableCtrl = 1; // 1: Software, >1 : Hardware
- cmReg.reg.clockSource = 3; // x4
- cmReg.reg.countDir = 0; // up
- cmReg.reg.countDirCtrl = 0; // quadrature
- cmReg.reg.outputRegLatchCtrl = 0; // latch on read
- cmReg.reg.preloadRegSel = 0; // PR0
+ /* Set Counter Mode Register */
+ cmReg.reg.coutSource = 0; /* out RCAP */
+ cmReg.reg.coutPolarity = 0; /* Polarity inverted */
+ cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */
+ cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */
+ cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */
+ cmReg.reg.clockSource = 3; /* x4 */
+ cmReg.reg.countDir = 0; /* up */
+ cmReg.reg.countDirCtrl = 0; /* quadrature */
+ cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
cmReg.reg.reserved = 0;
n = 0;
udelay(1000);
printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
- // Load the pre-laod register high word
-// value = (short) (0x55);
-// outw(value, ADDR_CHAN_REG(REG_C0H, n));
+ /* Load the pre-laod register high word */
+/* value = (short) (0x55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
- // Load the pre-laod register low word
-// value = (short)(0xaa55);
-// outw(value, ADDR_CHAN_REG(REG_C0L, n));
+ /* Load the pre-laod register low word */
+/* value = (short)(0xaa55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
- // Write the Counter Control Register
-// outw(value, ADDR_CHAN_REG(REG_C0C, 0));
+ /* Write the Counter Control Register */
+/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
- // Reset the counter if it is software preload
+ /* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
- outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); // Reset the counter
- outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); // Load the counter from PR0
+ outw(0x8000, ADDR_CHAN_REG(REG_C0C, n)); /* Reset the counter */
+ outw(0x4000, ADDR_CHAN_REG(REG_C0C, n)); /* Load the counter from PR0 */
}
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
static int s526_gpct_rinsn(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
- int i; // counts the Data
+ int i; /* counts the Data */
int counter_channel = CR_CHAN(insn->chanspec);
unsigned short datalow;
unsigned short datahigh;
- // Check if (n > 0)
+ /* Check if (n > 0) */
if (insn->n <= 0) {
printk("s526: INSN_READ: n should be > 0\n");
return -EINVAL;
}
- // Read the low word first
+ /* Read the low word first */
for (i = 0; i < insn->n; i++) {
datalow = inw(ADDR_CHAN_REG(REG_C0L, counter_channel));
datahigh = inw(ADDR_CHAN_REG(REG_C0H, counter_channel));
data[i] = (int)(datahigh & 0x00FF);
data[i] = (data[i] << 16) | (datalow & 0xFFFF);
-// printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow);
+/* printk("s526 GPCT[%d]: %x(0x%04x, 0x%04x)\n", counter_channel, data[i], datahigh, datalow); */
}
return i;
}
static int s526_gpct_insn_config(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
- int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec
+ int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */
int i;
short value;
-// printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel);
+/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */
for (i = 0; i < MAX_GPCT_CONFIG_DATA; i++) {
devpriv->s526_gpct_config[subdev_channel].data[i] =
insn->data[i];
-// printk("data[%d]=%x\n", i, insn->data[i]);
+/* printk("data[%d]=%x\n", i, insn->data[i]); */
}
- // Check what type of Counter the user requested, data[0] contains
- // the Application type
+ /* Check what type of Counter the user requested, data[0] contains */
+ /* the Application type */
switch (insn->data[0]) {
case INSN_CONFIG_GPCT_QUADRATURE_ENCODER:
/*
devpriv->s526_gpct_config[subdev_channel].app =
PositionMeasurement;
-/*
- // Example of Counter Application
- //One-shot (software trigger)
- cmReg.reg.coutSource = 0; // out RCAP
- cmReg.reg.coutPolarity = 1; // Polarity inverted
- cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled
- cmReg.reg.hwCtEnableSource = 3; // NOT RCAP
- cmReg.reg.ctEnableCtrl = 2; // Hardware
- cmReg.reg.clockSource = 2; // Internal
- cmReg.reg.countDir = 1; // Down
- cmReg.reg.countDirCtrl = 1; // Software
- cmReg.reg.outputRegLatchCtrl = 0; // latch on read
- cmReg.reg.preloadRegSel = 0; // PR0
+#if 0
+ /* Example of Counter Application */
+ /* One-shot (software trigger) */
+ cmReg.reg.coutSource = 0; /* out RCAP */
+ cmReg.reg.coutPolarity = 1; /* Polarity inverted */
+ cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */
+ cmReg.reg.hwCtEnableSource = 3; /* NOT RCAP */
+ cmReg.reg.ctEnableCtrl = 2; /* Hardware */
+ cmReg.reg.clockSource = 2; /* Internal */
+ cmReg.reg.countDir = 1; /* Down */
+ cmReg.reg.countDirCtrl = 1; /* Software */
+ cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
cmReg.reg.reserved = 0;
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter
- outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0
+ outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
+ outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
- outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset RCAP (fires one-shot)
+ outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset RCAP (fires one-shot) */
-*/
+#endif
#if 1
- // Set Counter Mode Register
- cmReg.reg.coutSource = 0; // out RCAP
- cmReg.reg.coutPolarity = 0; // Polarity inverted
- cmReg.reg.autoLoadResetRcap = 0; // Auto load disabled
- cmReg.reg.hwCtEnableSource = 2; // NOT RCAP
- cmReg.reg.ctEnableCtrl = 1; // 1: Software, >1 : Hardware
- cmReg.reg.clockSource = 3; // x4
- cmReg.reg.countDir = 0; // up
- cmReg.reg.countDirCtrl = 0; // quadrature
- cmReg.reg.outputRegLatchCtrl = 0; // latch on read
- cmReg.reg.preloadRegSel = 0; // PR0
+ /* Set Counter Mode Register */
+ cmReg.reg.coutSource = 0; /* out RCAP */
+ cmReg.reg.coutPolarity = 0; /* Polarity inverted */
+ cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */
+ cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */
+ cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */
+ cmReg.reg.clockSource = 3; /* x4 */
+ cmReg.reg.countDir = 0; /* up */
+ cmReg.reg.countDirCtrl = 0; /* quadrature */
+ cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
cmReg.reg.reserved = 0;
- // Set Counter Mode Register
-// printk("s526: Counter Mode register=%x\n", cmReg.value);
+ /* Set Counter Mode Register */
+/* printk("s526: Counter Mode register=%x\n", cmReg.value); */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Reset the counter if it is software preload
+ /* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
- outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter
-// outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0
+ outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
+/* outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); Load the counter from PR0 */
}
#else
- cmReg.reg.countDirCtrl = 0; // 0 quadrature, 1 software control
+ cmReg.reg.countDirCtrl = 0; /* 0 quadrature, 1 software control */
- // data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4
+ /* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */
if (insn->data[1] == GPCT_X2) {
cmReg.reg.clockSource = 1;
} else if (insn->data[1] == GPCT_X4) {
cmReg.reg.clockSource = 0;
}
- // When to take into account the indexpulse:
+ /* When to take into account the indexpulse: */
if (insn->data[2] == GPCT_IndexPhaseLowLow) {
} else if (insn->data[2] == GPCT_IndexPhaseLowHigh) {
} else if (insn->data[2] == GPCT_IndexPhaseHighLow) {
} else if (insn->data[2] == GPCT_IndexPhaseHighHigh) {
}
- // Take into account the index pulse?
+ /* Take into account the index pulse? */
if (insn->data[3] == GPCT_RESET_COUNTER_ON_INDEX)
- cmReg.reg.autoLoadResetRcap = 4; // Auto load with INDEX^
+ cmReg.reg.autoLoadResetRcap = 4; /* Auto load with INDEX^ */
- // Set Counter Mode Register
+ /* Set Counter Mode Register */
cmReg.value = (short) (insn->data[1] & 0xFFFF);
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Load the pre-laod register high word
+ /* Load the pre-laod register high word */
value = (short) ((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- // Load the pre-laod register low word
+ /* Load the pre-laod register low word */
value = (short) (insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- // Write the Counter Control Register
+ /* Write the Counter Control Register */
if (insn->data[3] != 0) {
value = (short) (insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
- // Reset the counter if it is software preload
+ /* Reset the counter if it is software preload */
if (cmReg.reg.autoLoadResetRcap == 0) {
- outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Reset the counter
- outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); // Load the counter from PR0
+ outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Reset the counter */
+ outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel)); /* Load the counter from PR0 */
}
#endif
break;
devpriv->s526_gpct_config[subdev_channel].app =
SinglePulseGeneration;
- // Set Counter Mode Register
+ /* Set Counter Mode Register */
cmReg.value = (short) (insn->data[1] & 0xFFFF);
- cmReg.reg.preloadRegSel = 0; // PR0
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Load the pre-laod register 0 high word
+ /* Load the pre-laod register 0 high word */
value = (short) ((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- // Load the pre-laod register 0 low word
+ /* Load the pre-laod register 0 low word */
value = (short) (insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- // Set Counter Mode Register
+ /* Set Counter Mode Register */
cmReg.value = (short) (insn->data[1] & 0xFFFF);
- cmReg.reg.preloadRegSel = 1; // PR1
+ cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Load the pre-laod register 1 high word
+ /* Load the pre-laod register 1 high word */
value = (short) ((insn->data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- // Load the pre-laod register 1 low word
+ /* Load the pre-laod register 1 low word */
value = (short) (insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- // Write the Counter Control Register
+ /* Write the Counter Control Register */
if (insn->data[3] != 0) {
value = (short) (insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
devpriv->s526_gpct_config[subdev_channel].app =
PulseTrainGeneration;
- // Set Counter Mode Register
+ /* Set Counter Mode Register */
cmReg.value = (short) (insn->data[1] & 0xFFFF);
- cmReg.reg.preloadRegSel = 0; // PR0
+ cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Load the pre-laod register 0 high word
+ /* Load the pre-laod register 0 high word */
value = (short) ((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- // Load the pre-laod register 0 low word
+ /* Load the pre-laod register 0 low word */
value = (short) (insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- // Set Counter Mode Register
+ /* Set Counter Mode Register */
cmReg.value = (short) (insn->data[1] & 0xFFFF);
- cmReg.reg.preloadRegSel = 1; // PR1
+ cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- // Load the pre-laod register 1 high word
+ /* Load the pre-laod register 1 high word */
value = (short) ((insn->data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- // Load the pre-laod register 1 low word
+ /* Load the pre-laod register 1 low word */
value = (short) (insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
- // Write the Counter Control Register
+ /* Write the Counter Control Register */
if (insn->data[3] != 0) {
value = (short) (insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
static int s526_gpct_winsn(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
- int subdev_channel = CR_CHAN(insn->chanspec); // Unpack chanspec
+ int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */
short value;
printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel);
cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
printk("s526: Counter Mode Register: %x\n", cmReg.value);
- // Check what Application of Counter this channel is configured for
+ /* Check what Application of Counter this channel is configured for */
switch (devpriv->s526_gpct_config[subdev_channel].app) {
case PositionMeasurement:
printk("S526: INSN_WRITE: PM\n");
value = (short) (*data & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
break;
- default: // Impossible
+ default: /* Impossible */
printk("s526: INSN_WRITE: Functionality %d not implemented yet\n", devpriv->s526_gpct_config[subdev_channel].app);
return -EINVAL;
break;
}
- // return the number of samples written
+ /* return the number of samples written */
return insn->n;
}
* enable channels here. The channel should be enabled in the
* INSN_READ handler. */
- // Enable ADC interrupt
+ /* Enable ADC interrupt */
outw(ISR_ADC_DONE, ADDR_REG(REG_IER));
-// printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC)));
+/* printk("s526: ADC current value: 0x%04x\n", inw(ADDR_REG(REG_ADC))); */
devpriv->s526_ai_config = (data[0] & 0x3FF) << 5;
if (data[1] > 0)
- devpriv->s526_ai_config |= 0x8000; //set the delay
+ devpriv->s526_ai_config |= 0x8000; /* set the delay */
- devpriv->s526_ai_config |= 0x0001; // ADC start bit.
+ devpriv->s526_ai_config |= 0x0001; /* ADC start bit. */
return result;
}
for (n = 0; n < insn->n; n++) {
/* trigger conversion */
outw(value, ADDR_REG(REG_ADC));
-// printk("s526: Wrote 0x%04x to ADC\n", value);
-// printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC)));
+/* printk("s526: Wrote 0x%04x to ADC\n", value); */
+/* printk("s526: ADC reg=0x%04x\n", inw(ADDR_REG(REG_ADC))); */
#define TIMEOUT 100
/* wait for conversion to end */
/* read data */
d = inw(ADDR_REG(REG_ADD));
-// printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF));
+/* printk("AI[%d]=0x%04x\n", n, (unsigned short)(d & 0xFFFF)); */
/* munge data */
data[n] = d ^ 0x8000;
int chan = CR_CHAN(insn->chanspec);
unsigned short val;
-// printk("s526_ao_winsn\n");
+/* printk("s526_ao_winsn\n"); */
val = chan << 1;
-// outw(val, dev->iobase + REG_DAC);
+/* outw(val, dev->iobase + REG_DAC); */
outw(val, ADDR_REG(REG_DAC));
/* Writing a list of values to an AO channel is probably not
* very useful, but that's how the interface is defined. */
for (i = 0; i < insn->n; i++) {
/* a typical programming sequence */
-// outw(data[i], dev->iobase + REG_ADD); // write the data to preload register
- outw(data[i], ADDR_REG(REG_ADD)); // write the data to preload register
+/* outw(data[i], dev->iobase + REG_ADD); write the data to preload register */
+ outw(data[i], ADDR_REG(REG_ADD)); /* write the data to preload register */
devpriv->ao_readback[chan] = data[i];
-// outw(val + 1, dev->iobase + REG_DAC); // starts the D/A conversion.
- outw(val + 1, ADDR_REG(REG_DAC)); // starts the D/A conversion.
+/* outw(val + 1, dev->iobase + REG_DAC); starts the D/A conversion. */
+ outw(val + 1, ADDR_REG(REG_DAC)); /* starts the D/A conversion. */
}
/* return the number of samples read/written */
/* on return, data[1] contains the value of the digital
* input and output lines. */
- data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; // low 8 bits are the data
+ data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */
/* or we could just return the software copy of the output values if
* it was a purely digital output subdevice */
- //data[1]=s->state;
+ /* data[1]=s->state; */
return 2;
}
* value COMEDI_INPUT or COMEDI_OUTPUT. */
if (data[0] == COMEDI_OUTPUT) {
- value |= 1 << (chan + 10); // bit 10/11 set the group 1/2's mode
+ value |= 1 << (chan + 10); /* bit 10/11 set the group 1/2's mode */
s->io_bits |= (0xF << chan);
} else {
- value &= ~(1 << (chan + 10)); // 1 is output, 0 is input.
+ value &= ~(1 << (chan + 10)); /* 1 is output, 0 is input. */
s->io_bits &= ~(0xF << chan);
}
outw(value, ADDR_REG(REG_DIO));
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff