--- /dev/null
+Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
+
+Required properties:
+- compatible : "snps,dw-apb-ssi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Optional properties:
+- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- num-cs : The number of chipselects. If omitted, this will default to 4.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@fff00000 {
+ compatible = "snps,dw-apb-ssi";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 154 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <2>;
+ cs-gpios = <&gpio0 13 0>,
+ <&gpio0 14 0>;
+ };
+
#include <linux/spi/spi.h>
#include <linux/scatterlist.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
#include "spi-dw.h"
struct dw_spi *dws;
struct resource *mem;
int ret;
+ int num_cs;
dwsmmio = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_mmio),
GFP_KERNEL);
return ret;
dws->bus_num = pdev->id;
- dws->num_cs = 4;
+
dws->max_freq = clk_get_rate(dwsmmio->clk);
+ num_cs = 4;
+
+ if (pdev->dev.of_node)
+ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+ dws->num_cs = num_cs;
+
if (pdev->dev.of_node) {
int i;
return 0;
}
+static const struct of_device_id dw_spi_mmio_of_match[] = {
+ { .compatible = "snps,dw-apb-ssi", },
+ { /* end of table */}
+};
+MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
+
static struct platform_driver dw_spi_mmio_driver = {
.probe = dw_spi_mmio_probe,
.remove = dw_spi_mmio_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = dw_spi_mmio_of_match,
},
};
module_platform_driver(dw_spi_mmio_driver);