If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-64)"
- range 2 64
+ int "Maximum number of CPUs (2-1024)"
+ range 2 1024
depends on SMP
- default "32"
+ default "64"
source "drivers/cpufreq/Kconfig"
#else
mov 0, %o0
#endif
- stb %o0, [%g6 + TI_CPU]
+ sth %o0, [%g6 + TI_CPU]
/* Off we go.... */
call start_kernel
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
u64 pstate, ver;
- int nack_busy_id, is_jbus;
+ int nack_busy_id, is_jbus, need_more;
if (cpus_empty(mask))
return;
__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
retry:
+ need_more = 0;
__asm__ __volatile__("wrpr %0, %1, %%pstate\n\t"
: : "r" (pstate), "i" (PSTATE_IE));
: /* no outputs */
: "r" (target), "i" (ASI_INTR_W));
nack_busy_id++;
+ if (nack_busy_id == 32) {
+ need_more = 1;
+ break;
+ }
}
}
if (dispatch_stat == 0UL) {
__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
: : "r" (pstate));
+ if (unlikely(need_more)) {
+ int i, cnt = 0;
+ for_each_cpu_mask(i, mask) {
+ cpu_clear(i, mask);
+ cnt++;
+ if (cnt == 32)
+ break;
+ }
+ goto retry;
+ }
return;
}
if (!--stuck)
if ((dispatch_stat & check_mask) == 0)
cpu_clear(i, mask);
this_busy_nack += 2;
+ if (this_busy_nack == 64)
+ break;
}
goto retry;
}
#define PG_dcache_dirty PG_arch_1
-#define PG_dcache_cpu_shift 24UL
-#define PG_dcache_cpu_mask (256UL - 1UL)
-
-#if NR_CPUS > 256
-#error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus
-#endif
+#define PG_dcache_cpu_shift 32UL
+#define PG_dcache_cpu_mask \
+ ((1UL<<ilog2(roundup_pow_of_two(NR_CPUS)))-1UL)
#define dcache_dirty_cpu(page) \
(((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask)
unsigned long end_pfn, pages_avail, shift, phys_base;
unsigned long real_end, i;
+ /* These build time checkes make sure that the dcache_dirty_cpu()
+ * page->flags usage will work.
+ *
+ * When a page gets marked as dcache-dirty, we store the
+ * cpu number starting at bit 32 in the page->flags. Also,
+ * functions like clear_dcache_dirty_cpu use the cpu mask
+ * in 13-bit signed-immediate instruction fields.
+ */
+ BUILD_BUG_ON(FLAGS_RESERVED != 32);
+ BUILD_BUG_ON(SECTIONS_WIDTH + NODES_WIDTH + ZONES_WIDTH +
+ ilog2(roundup_pow_of_two(NR_CPUS)) > FLAGS_RESERVED);
+ BUILD_BUG_ON(NR_CPUS > 4096);
+
kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
kern_size = (unsigned long)&_end - (unsigned long)KERNBASE;
* the calculations done by the macro mid-stream.
*/
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
- ldub [THR + TI_CPU], REG1; \
+ lduh [THR + TI_CPU], REG1; \
sethi %hi(__per_cpu_shift), REG3; \
sethi %hi(__per_cpu_base), REG2; \
ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
/* D$ line 1 */
struct task_struct *task;
unsigned long flags;
- __u8 cpu;
__u8 fpsaved[7];
+ __u8 pad;
unsigned long ksp;
/* D$ line 2 */
int preempt_count; /* 0 => preemptable, <0 => BUG */
__u8 new_child;
__u8 syscall_noerror;
- __u16 __pad;
+ __u16 cpu;
unsigned long *utraps;
#define TI_CURRENT_DS (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
#define TI_FPDEPTH (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
#define TI_WSAVED (TI_FLAGS + TI_FLAG_BYTE_WSAVED)
-#define TI_CPU 0x00000010
-#define TI_FPSAVED 0x00000011
+#define TI_FPSAVED 0x00000010
#define TI_KSP 0x00000018
#define TI_FAULT_ADDR 0x00000020
#define TI_KREGS 0x00000028
#define TI_PRE_COUNT 0x00000038
#define TI_NEW_CHILD 0x0000003c
#define TI_SYS_NOERROR 0x0000003d
+#define TI_CPU 0x0000003e
#define TI_UTRAPS 0x00000040
#define TI_REG_WINDOW 0x00000048
#define TI_RWIN_SPTRS 0x000003c8