USB: pl2303: add line-status quirk for Siemens phones
authorJohan Hovold <jhovold@gmail.com>
Sun, 29 Dec 2013 18:23:05 +0000 (19:23 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 3 Jan 2014 20:31:47 +0000 (12:31 -0800)
Implement line-status handling for Siemens phones as a quirk rather than
spreading such information all over the driver by matching on vendor and
and product ids.

Note that the SIEMENS_PRODUCT_ID_EF81, which was added after the
line-status handling for the other Siemens phones was fixed, might also
need this quirk.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/serial/pl2303.c

index 440b99c154350fc746ee3e6877bf6fda1412275f..8dd1c4a0aefd14e90a38b6c7118414a3aad3624d 100644 (file)
@@ -31,6 +31,9 @@
 #include <asm/unaligned.h>
 #include "pl2303.h"
 
+
+#define PL2303_QUIRK_UART_STATE_IDX0           BIT(0)
+
 static const struct usb_device_id id_table[] = {
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
@@ -58,9 +61,12 @@ static const struct usb_device_id id_table[] = {
        { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
        { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) },
-       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
-       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
-       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
+               .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
+               .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
+       { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
+               .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
        { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
        { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
        { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
@@ -110,7 +116,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define VENDOR_READ_REQUEST_TYPE       0xc0
 #define VENDOR_READ_REQUEST            0x01
 
-#define UART_STATE                     0x08
+#define UART_STATE_INDEX               8
 #define UART_STATE_TRANSIENT_MASK      0x74
 #define UART_DCD                       0x01
 #define UART_DSR                       0x02
@@ -130,6 +136,7 @@ enum pl2303_type {
 
 struct pl2303_serial_private {
        enum pl2303_type type;
+       unsigned long quirks;
 };
 
 struct pl2303_private {
@@ -182,6 +189,14 @@ static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
        return 0;
 }
 
+static int pl2303_probe(struct usb_serial *serial,
+                                       const struct usb_device_id *id)
+{
+       usb_set_serial_data(serial, (void *)id->driver_info);
+
+       return 0;
+}
+
 static int pl2303_startup(struct usb_serial *serial)
 {
        struct pl2303_serial_private *spriv;
@@ -209,6 +224,8 @@ static int pl2303_startup(struct usb_serial *serial)
        dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
        spriv->type = type;
+       spriv->quirks = (unsigned long)usb_get_serial_data(serial);
+
        usb_set_serial_data(serial, spriv);
 
        pl2303_vendor_read(serial, 0x8484, buf);
@@ -739,27 +756,18 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
                                      unsigned char *data,
                                      unsigned int actual_length)
 {
+       struct usb_serial *serial = port->serial;
+       struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
        struct pl2303_private *priv = usb_get_serial_port_data(port);
        struct tty_struct *tty;
        unsigned long flags;
-       u8 status_idx = UART_STATE;
-       u8 length = UART_STATE + 1;
+       unsigned int status_idx = UART_STATE_INDEX;
        u8 prev_line_status;
-       u16 idv, idp;
 
-       idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
-       idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
-
-       if (idv == SIEMENS_VENDOR_ID) {
-               if (idp == SIEMENS_PRODUCT_ID_X65 ||
-                   idp == SIEMENS_PRODUCT_ID_SX1 ||
-                   idp == SIEMENS_PRODUCT_ID_X75) {
-                       length = 1;
-                       status_idx = 0;
-               }
-       }
+       if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
+               status_idx = 0;
 
-       if (actual_length < length)
+       if (actual_length < status_idx + 1)
                return;
 
        /* Save off the uart status for others to look at */
@@ -892,6 +900,7 @@ static struct usb_serial_driver pl2303_device = {
        .tiocmiwait =           pl2303_tiocmiwait,
        .process_read_urb =     pl2303_process_read_urb,
        .read_int_callback =    pl2303_read_int_callback,
+       .probe =                pl2303_probe,
        .attach =               pl2303_startup,
        .release =              pl2303_release,
        .port_probe =           pl2303_port_probe,