hwmon: (ltc2978) Add support for LTC3886

LTC3886 is a is a dual PolyPhase DC/DC synchronous step-down switching
regulator controller. It is mostly command compatible to LTC3883,
but supports two phases instead of one.

Suggested-by: Michael Jones <mike@proclivis.com>
Tested-by: Michael Jones <mike@proclivis.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
index 5dc2691ccf08171d8cb9e5e8e737fe172e934def..a7afbf60bb9c0315126892663f5b3863dffe50de 100644 (file)
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -10,6 +10,7 @@ Required properties:
   * "lltc,ltc3880"
   * "lltc,ltc3882"
   * "lltc,ltc3883"
+  * "lltc,ltc3886"
   * "lltc,ltc3887"
   * "lltc,ltm2987"
   * "lltc,ltm4676"
@@ -25,7 +26,7 @@ Valid names of regulators depend on number of supplies supported per device:
   * ltc2974, ltc2975 : vout0 - vout3
   * ltc2977, ltc2980, ltm2987 : vout0 - vout7
   * ltc2978 : vout0 - vout7
-  * ltc3880, ltc3882 : vout0 - vout1
+  * ltc3880, ltc3882, ltc3886 : vout0 - vout1
   * ltc3883 : vout0
   * ltm4676 : vout0 - vout1
 

diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
index 15835539879849c10642f149d77440b6b664d571..f997aa53eb95c373872241c7ad8c8e238f049365 100644 (file)
--- a/Documentation/hwmon/ltc2978
+++ b/Documentation/hwmon/ltc2978
@@ -35,6 +35,10 @@ Supported chips:
     Prefix: 'ltc3883'
     Addresses scanned: -
     Datasheet: http://www.linear.com/product/ltc3883
+  * Linear Technology LTC3886
+    Prefix: 'ltc3886'
+    Addresses scanned: -
+    Datasheet: http://www.linear.com/product/ltc3886
   * Linear Technology LTC3887
     Prefix: 'ltc3887'
     Addresses scanned: -
@@ -60,8 +64,8 @@ LTC2977 is a pin compatible replacement for LTC2978.
 LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
 in a single die. The chip is instantiated and reported as two separate chips
 on two different I2C bus addresses.
-LTC3880, LTC3882, and LTC3887 are dual output poly-phase step-down DC/DC
-controllers.
+LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
+DC/DC controllers.
 LTC3883 is a single phase step-down DC/DC controller.
 LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
 additional components on a single die. The chip is instantiated and reported
@@ -113,7 +117,7 @@ in[N]_label         "vout[1-8]".
                        LTC2974, LTC2975: N=2-5
                        LTC2977, LTC2980, LTM2987: N=2-9
                        LTC2978: N=2-9
-                       LTC3880, LTC3882, LTC3887, LTM4676: N=2-3
+                       LTC3880, LTC3882, LTC23886 LTC3887, LTM4676: N=2-3
                        LTC3883: N=2
 in[N]_input            Measured output voltage.
 in[N]_min              Minimum output voltage.
@@ -161,29 +165,30 @@ temp[N]_highest           Highest measured temperature. Not supported for chip
 temp[N]_reset_history  Reset temperature history. Not supported for chip
                        temperature sensor on LTC2974 and LTC2975.
 
-power1_label           "pin". LTC3883 only.
+power1_label           "pin". LTC3883 and LTC3886 only.
 power1_input           Measured input power.
 
 power[N]_label         "pout[1-4]".
                        LTC2974, LTC2975: N=1-4
                        LTC2977, LTC2980, LTM2987: Not supported
                        LTC2978: Not supported
-                       LTC3880, LTC3882, LTC3887, LTM4676: N=1-2
+                       LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=1-2
                        LTC3883: N=2
 power[N]_input         Measured output power.
 
-curr1_label            "iin". LTC3880, LTC3883, LTC3887, and LTM4676 only.
+curr1_label            "iin". LTC3880, LTC3883, LTC3886, LTC3887, and LTM4676
+                       only.
 curr1_input            Measured input current.
 curr1_max              Maximum input current.
 curr1_max_alarm                Input current high alarm.
-curr1_highest          Highest input current. LTC3883 only.
-curr1_reset_history    Reset input current history. LTC3883 only.
+curr1_highest          Highest input current. LTC3883 and LTC3886 only.
+curr1_reset_history    Reset input current history. LTC3883 and LTC3886 only.
 
 curr[N]_label          "iout[1-4]".
                        LTC2974, LTC2975: N=1-4
                        LTC2977, LTC2980, LTM2987: not supported
                        LTC2978: not supported
-                       LTC3880, LTC3882, LTC3887, LTM4676: N=2-3
+                       LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=2-3
                        LTC3883: N=2
 curr[N]_input          Measured output current.
 curr[N]_max            Maximum output current.

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index af778aed4033e3d32760db185079011fe957179a..5ebc36255c8897168f1fba509669c6d65aa4a933 100644 (file)
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -53,7 +53,7 @@ config SENSORS_LTC2978
        help
          If you say yes here you get hardware monitoring support for Linear
          Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
-         LTC3883, LTC3887, LTCM2987, and LTM4676.
+         LTC3883, LTC3886, LTC3887, LTCM2987, and LTM4676.
 
          This driver can also be built as a module. If so, the module will
          be called ltc2978.

diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 48dcde0bc740ca16c6f63546edbd2fedf99e23c3..60fe8f9839d3efda4690b37e717bf5a4f116fd56 100644 (file)
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -25,7 +25,7 @@
 #include "pmbus.h"
 
 enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
-       ltc3883, ltc3887, ltm2987, ltm4676 };
+       ltc3883, ltc3886, ltc3887, ltm2987, ltm4676 };
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK          0xdd
@@ -47,7 +47,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTC3880_MFR_CLEAR_PEAKS                0xe3
 #define LTC3880_MFR_TEMPERATURE2_PEAK  0xf4
 
-/* LTC3883 only */
+/* LTC3883 and LTC3886 only */
 #define LTC3883_MFR_IIN_PEAK           0xe1
 
 /* LTC2975 only */
@@ -69,6 +69,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
 #define LTC3882_ID                     0x4200
 #define LTC3882_ID_D1                  0x4240  /* Dash 1 */
 #define LTC3883_ID                     0x4300
+#define LTC3886_ID                     0x4600
 #define LTC3887_ID                     0x4700
 #define LTM2987_ID_A                   0x8010  /* A/B for two die IDs */
 #define LTM2987_ID_B                   0x8020
@@ -417,6 +418,7 @@ static const struct i2c_device_id ltc2978_id[] = {
        {"ltc3880", ltc3880},
        {"ltc3882", ltc3882},
        {"ltc3883", ltc3883},
+       {"ltc3886", ltc3886},
        {"ltc3887", ltc3887},
        {"ltm2987", ltm2987},
        {"ltm4676", ltm4676},
@@ -485,6 +487,8 @@ static int ltc2978_get_id(struct i2c_client *client)
                return ltc3882;
        else if (chip_id == LTC3883_ID)
                return ltc3883;
+       else if (chip_id == LTC3886_ID)
+               return ltc3886;
        else if (chip_id == LTC3887_ID)
                return ltc3887;
        else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
@@ -624,6 +628,21 @@ static int ltc2978_probe(struct i2c_client *client,
                  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
                  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
                break;
+       case ltc3886:
+               data->features |= FEAT_CLEAR_PEAKS;
+               info->read_word_data = ltc3883_read_word_data;
+               info->pages = LTC3880_NUM_PAGES;
+               info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+                 | PMBUS_HAVE_STATUS_INPUT
+                 | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+                 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+                 | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+                 | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+               info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+                 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+                 | PMBUS_HAVE_POUT
+                 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+               break;
        default:
                return -ENODEV;
        }
@@ -650,6 +669,7 @@ static const struct of_device_id ltc2978_of_match[] = {
        { .compatible = "lltc,ltc3880" },
        { .compatible = "lltc,ltc3882" },
        { .compatible = "lltc,ltc3883" },
+       { .compatible = "lltc,ltc3886" },
        { .compatible = "lltc,ltc3887" },
        { .compatible = "lltc,ltm2987" },
        { .compatible = "lltc,ltm4676" },