Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann <jwlademann@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 477b1d9861df9388ed08fc50a320c67c50a6ff54..1913301df08f079425a5d6ae5ceb11124c45e3aa 100644 (file)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -819,7 +819,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
                if (etd->set_hw_resolution)
                        etd->reg_10 = 0x0b;
                else
-                       etd->reg_10 = 0x03;
+                       etd->reg_10 = 0x01;
 
                if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
                        rc = -1;
@@ -1320,7 +1320,8 @@ static int elantech_reconnect(struct psmouse *psmouse)
 }
 
 /*
- * Some hw_version 3 models go into error state when we try to set bit 3 of r10
+ * Some hw_version 3 models go into error state when we try to set
+ * bit 3 and/or bit 1 of r10.
  */
 static const struct dmi_system_id no_hw_res_dmi_table[] = {
 #if defined(CONFIG_DMI) && defined(CONFIG_X86)