--- /dev/null
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include "tsens.h"
+
+#define CAL_MDEGC 30000
+
+#define CONFIG_ADDR 0x3640
+#define CONFIG_ADDR_8660 0x3620
+/* CONFIG_ADDR bitmasks */
+#define CONFIG 0x9b
+#define CONFIG_MASK 0xf
+#define CONFIG_8660 1
+#define CONFIG_SHIFT_8660 28
+#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
+
+#define STATUS_CNTL_ADDR_8064 0x3660
+#define CNTL_ADDR 0x3620
+/* CNTL_ADDR bitmasks */
+#define EN BIT(0)
+#define SW_RST BIT(1)
+#define SENSOR0_EN BIT(3)
+#define SLP_CLK_ENA BIT(26)
+#define SLP_CLK_ENA_8660 BIT(24)
+#define MEASURE_PERIOD 1
+#define SENSOR0_SHIFT 3
+
+/* INT_STATUS_ADDR bitmasks */
+#define MIN_STATUS_MASK BIT(0)
+#define LOWER_STATUS_CLR BIT(1)
+#define UPPER_STATUS_CLR BIT(2)
+#define MAX_STATUS_MASK BIT(3)
+
+#define THRESHOLD_ADDR 0x3624
+/* THRESHOLD_ADDR bitmasks */
+#define THRESHOLD_MAX_LIMIT_SHIFT 24
+#define THRESHOLD_MIN_LIMIT_SHIFT 16
+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
+
+/* Initial temperature threshold values */
+#define LOWER_LIMIT_TH 0x50
+#define UPPER_LIMIT_TH 0xdf
+#define MIN_LIMIT_TH 0x0
+#define MAX_LIMIT_TH 0xff
+
+#define S0_STATUS_ADDR 0x3628
+#define INT_STATUS_ADDR 0x363c
+#define TRDY_MASK BIT(7)
+#define TIMEOUT_US 100
+
+static int suspend_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ unsigned int mask;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ mask = SLP_CLK_ENA | EN;
+ else
+ mask = SLP_CLK_ENA_8660 | EN;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int resume_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+ if (ret)
+ return ret;
+
+ /*
+ * Separate CONFIG restore is not needed only for 8660 as
+ * config is part of CTRL Addr and its restored as such
+ */
+ if (tmdev->num_sensors > 1) {
+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int enable_8960(struct tsens_device *tmdev, int id)
+{
+ int ret;
+ u32 reg, mask;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, ®);
+ if (ret)
+ return ret;
+
+ mask = BIT(id + SENSOR0_SHIFT);
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ reg |= mask | SLP_CLK_ENA | EN;
+ else
+ reg |= mask | SLP_CLK_ENA_8660 | EN;
+
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void disable_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ u32 reg_cntl;
+ u32 mask;
+
+ mask = GENMASK(tmdev->num_sensors - 1, 0);
+ mask <<= SENSOR0_SHIFT;
+ mask |= EN;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl);
+ if (ret)
+ return;
+
+ reg_cntl &= ~mask;
+
+ if (tmdev->num_sensors > 1)
+ reg_cntl &= ~SLP_CLK_ENA;
+ else
+ reg_cntl &= ~SLP_CLK_ENA_8660;
+
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+}
+
+static int init_8960(struct tsens_device *tmdev)
+{
+ int ret, i;
+ u32 reg_cntl;
+
+ tmdev->map = dev_get_regmap(tmdev->dev, NULL);
+ if (!tmdev->map)
+ return -ENODEV;
+
+ /*
+ * The status registers for each sensor are discontiguous
+ * because some SoCs have 5 sensors while others have more
+ * but the control registers stay in the same place, i.e
+ * directly after the first 5 status registers.
+ */
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (i >= 5)
+ tmdev->sensor[i].status = S0_STATUS_ADDR + 40;
+ tmdev->sensor[i].status += i * 4;
+ }
+
+ reg_cntl = SW_RST;
+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1) {
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
+ reg_cntl &= ~SW_RST;
+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
+ CONFIG_MASK, CONFIG);
+ } else {
+ reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
+ reg_cntl &= ~CONFIG_MASK_8660;
+ reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
+ }
+
+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ reg_cntl |= EN;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int calibrate_8960(struct tsens_device *tmdev)
+{
+ int i;
+ char *data;
+
+ ssize_t num_read = tmdev->num_sensors;
+ struct tsens_sensor *s = tmdev->sensor;
+
+ data = qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(data))
+ data = qfprom_read(tmdev->dev, "calib_backup");
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ for (i = 0; i < num_read; i++, s++)
+ s->offset = data[i];
+
+ return 0;
+}
+
+/* Temperature on y axis and ADC-code on x-axis */
+static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
+{
+ int slope, offset;
+
+ slope = thermal_zone_get_slope(s->tzd);
+ offset = CAL_MDEGC - slope * s->offset;
+
+ return adc_code * slope + offset;
+}
+
+static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
+{
+ int ret;
+ u32 code, trdy;
+ const struct tsens_sensor *s = &tmdev->sensor[id];
+ unsigned long timeout;
+
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+ do {
+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+ if (ret)
+ return ret;
+ if (!(trdy & TRDY_MASK))
+ continue;
+ ret = regmap_read(tmdev->map, s->status, &code);
+ if (ret)
+ return ret;
+ *temp = code_to_mdegC(code, s);
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+const struct tsens_ops ops_8960 = {
+ .init = init_8960,
+ .calibrate = calibrate_8960,
+ .get_temp = get_temp_8960,
+ .enable = enable_8960,
+ .disable = disable_8960,
+ .suspend = suspend_8960,
+ .resume = resume_8960,
+};
+
+const struct tsens_data data_8960 = {
+ .num_sensors = 11,
+ .ops = &ops_8960,
+};
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff