Armadillo500 Add support for Seiko Instruments S-35390A rtc over i2c.

The RTC chip Seiko Instruments S-35390A is connected to the Application
Processor over the second bus i2c with the hard coded address 0x30.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index fa973e40329ef066cede1da68996bc6b26c09a83..54aab401dbdf7b263ac36d9db1dc8b6a1e8f8aa1 100644 (file)
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -35,6 +35,7 @@
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -104,6 +105,13 @@ static int armadillo5x0_pins[] = {
        MX31_PIN_CSPI2_MISO__SDA,
 };
 
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO  IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+       I2C_BOARD_INFO("s35390a", 0x30),
+};
+
 /* GPIO BUTTONS */
 static struct gpio_keys_button armadillo5x0_buttons[] = {
        {
@@ -373,6 +381,18 @@ static void __init armadillo5x0_init(void)
 
        /* set NAND page size to 2k if not configured via boot mode pins */
        __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+       /* RTC */
+       /* Get RTC IRQ and register the chip */
+       if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+               if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+                       armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+               else
+                       gpio_free(ARMADILLO5X0_RTC_GPIO);
+       }
+       if (armadillo5x0_i2c_rtc.irq == 0)
+               pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+       i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)