Power: Reset: Generalize qnap-poweroff to work on Synology devices.
authorAndrew Lunn <andrew@lunn.ch>
Wed, 19 Feb 2014 20:02:35 +0000 (06:02 +1000)
committerJason Cooper <jason@lakedaemon.net>
Tue, 4 Mar 2014 03:48:41 +0000 (03:48 +0000)
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.

Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
drivers/power/reset/qnap-poweroff.c

index 0347d8350d94712fc26a42e153ea2f06c3363438..af25e77c0e0c34a71659c091ad80b026b28bd817 100644 (file)
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
index 37f56f7ee9265daefa7d1bfd0ca458825afba220..a75db7f8a92f4efda86b528c3814615327b85ce2 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
  *
  * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
  *
 
 #define UART1_REG(x)   (base + ((UART_##x) << 2))
 
+struct power_off_cfg {
+       u32 baud;
+       char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+       .baud = 19200,
+       .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+       .baud = 9600,
+       .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+       { .compatible = "qnap,power-off",
+         .data = &qnap_power_off_cfg,
+       },
+       { .compatible = "synology,power-off",
+         .data = &synology_power_off_cfg,
+       },
+       {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
 static void __iomem *base;
 static unsigned long tclk;
+static const struct power_off_cfg *cfg;
 
 static void qnap_power_off(void)
 {
-       /* 19200 baud divisor */
-       const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+       const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
        pr_err("%s: triggering power-off...\n", __func__);
 
-       /* hijack UART1 and reset into sane state (19200,8n1) */
+       /* hijack UART1 and reset into sane state */
        writel(0x83, UART1_REG(LCR));
        writel(divisor & 0xff, UART1_REG(DLL));
        writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
        writel(0x00, UART1_REG(FCR));
        writel(0x00, UART1_REG(MCR));
 
-       /* send the power-off command 'A' to PIC */
-       writel('A', UART1_REG(TX));
+       /* send the power-off command to PIC */
+       writel(cfg->cmd, UART1_REG(TX));
 }
 
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
+       struct device_node *np = pdev->dev.of_node;
        struct resource *res;
        struct clk *clk;
        char symname[KSYM_NAME_LEN];
 
+       const struct of_device_id *match =
+               of_match_node(qnap_power_off_of_match_table, np);
+       cfg = match->data;
+
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
        return 0;
 }
 
-static const struct of_device_id qnap_power_off_of_match_table[] = {
-       { .compatible = "qnap,power-off", },
-       {}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
 static struct platform_driver qnap_power_off_driver = {
        .probe  = qnap_power_off_probe,
        .remove = qnap_power_off_remove,