sky2: Allocate initial skbs in sky2_alloc_buffers

Allocate everything in one place so there's a single point
of failure in sky2_up, and sky2_rx_start can no longer fail.

Don't leave the hardware in a partially initialized state in the
case rx ring allocation fails.

As with the old code, the rx ring still needs to be fully
allocated for sky2_up to succeed.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index c5de65c6f6e11b4c3f563d38df74105821b45e64..493a82018cbdfc8363586656830af79683e90a77 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1363,8 +1363,32 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
        sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
 }
 
+static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
+{
+       struct sky2_hw *hw = sky2->hw;
+       unsigned i;
+
+       sky2->rx_data_size = sky2_get_rx_data_size(sky2);
+
+       /* Fill Rx ring */
+       for (i = 0; i < sky2->rx_pending; i++) {
+               struct rx_ring_info *re = sky2->rx_ring + i;
+
+               re->skb = sky2_rx_alloc(sky2);
+               if (!re->skb)
+                       return -ENOMEM;
+
+               if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
+                       dev_kfree_skb(re->skb);
+                       re->skb = NULL;
+                       return -ENOMEM;
+               }
+       }
+       return 0;
+}
+
 /*
- * Allocate and setup receiver buffer pool.
+ * Setup receiver buffer pool.
  * Normal case this ends up creating one list element for skb
  * in the receive ring. Worst case if using large MTU and each
  * allocation falls on a different 64 bit region, that results
@@ -1372,7 +1396,7 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
  * One element is used for checksum enable/disable, and one
  * extra to avoid wrap.
  */
-static int sky2_rx_start(struct sky2_port *sky2)
+static void sky2_rx_start(struct sky2_port *sky2)
 {
        struct sky2_hw *hw = sky2->hw;
        struct rx_ring_info *re;
@@ -1398,22 +1422,9 @@ static int sky2_rx_start(struct sky2_port *sky2)
        if (!(hw->flags & SKY2_HW_NEW_LE))
                rx_set_checksum(sky2);
 
-       sky2->rx_data_size = sky2_get_rx_data_size(sky2);
-
-       /* Fill Rx ring */
+       /* submit Rx ring */
        for (i = 0; i < sky2->rx_pending; i++) {
                re = sky2->rx_ring + i;
-
-               re->skb = sky2_rx_alloc(sky2);
-               if (!re->skb)
-                       goto nomem;
-
-               if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
-                       dev_kfree_skb(re->skb);
-                       re->skb = NULL;
-                       goto nomem;
-               }
-
                sky2_rx_submit(sky2, re);
        }
 
@@ -1455,13 +1466,6 @@ static int sky2_rx_start(struct sky2_port *sky2)
                sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
                             TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
        }
-
-
-
-       return 0;
-nomem:
-       sky2_rx_clean(sky2);
-       return -ENOMEM;
 }
 
 static int sky2_alloc_buffers(struct sky2_port *sky2)
@@ -1492,7 +1496,7 @@ static int sky2_alloc_buffers(struct sky2_port *sky2)
        if (!sky2->rx_ring)
                goto nomem;
 
-       return 0;
+       return sky2_alloc_rx_skbs(sky2);
 nomem:
        return -ENOMEM;
 }
@@ -1501,6 +1505,8 @@ static void sky2_free_buffers(struct sky2_port *sky2)
 {
        struct sky2_hw *hw = sky2->hw;
 
+       sky2_rx_clean(sky2);
+
        if (sky2->rx_le) {
                pci_free_consistent(hw->pdev, RX_LE_BYTES,
                                    sky2->rx_le, sky2->rx_le_map);
@@ -1590,9 +1596,7 @@ static int sky2_up(struct net_device *dev)
        sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
 #endif
 
-       err = sky2_rx_start(sky2);
-       if (err)
-               goto err_out;
+       sky2_rx_start(sky2);
 
        /* Enable interrupts from phy/mac for port */
        imask = sky2_read32(hw, B0_IMSK);
@@ -1960,8 +1964,6 @@ static int sky2_down(struct net_device *dev)
        /* Free any pending frames stuck in HW queue */
        sky2_tx_complete(sky2, sky2->tx_prod);
 
-       sky2_rx_clean(sky2);
-
        sky2_free_buffers(sky2);
 
        return 0;
@@ -2257,7 +2259,11 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 
        sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
 
-       err = sky2_rx_start(sky2);
+       err = sky2_alloc_rx_skbs(sky2);
+       if (!err)
+               sky2_rx_start(sky2);
+       else
+               sky2_rx_clean(sky2);
        sky2_write32(hw, B0_IMSK, imask);
 
        sky2_read32(hw, B0_Y2_SP_LISR);