sata_inic162x: finally, driver for initio 162x SATA controllers, take #2
authorTejun Heo <htejun@gmail.com>
Wed, 3 Jan 2007 08:32:45 +0000 (17:32 +0900)
committerJeff Garzik <jeff@garzik.org>
Fri, 9 Feb 2007 22:39:31 +0000 (17:39 -0500)
Driver for Initio 162x SATA controllers.  ATA r/w, ATAPI r, hotplug
and suspend/resume work.  ATAPI w (recording, that is) broken.  Feel
free to fix it, but be warned, this controller is weird.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/Kconfig
drivers/ata/Makefile
drivers/ata/sata_inic162x.c [new file with mode: 0644]

index f72b3415d75f587b79ff191d52544d6241d24812..ea102c089222b9e88ff3496c625784f176f672a0 100644 (file)
@@ -147,6 +147,12 @@ config SATA_VITESSE
 
          If unsure, say N.
 
+config SATA_INIC162X
+       tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
+       depends on PCI && EXPERIMENTAL
+       help
+         This option enables support for Initio 162x Serial ATA.
+
 config SATA_INTEL_COMBINED
        bool
        depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
index a0df15d9e4a16b852049a98847d1e9687ec7f483..cd096f0c78a105c2e9a9e605e0acdc3aed82af89 100644 (file)
@@ -15,6 +15,7 @@ obj-$(CONFIG_SATA_SX4)                += sata_sx4.o
 obj-$(CONFIG_SATA_NV)          += sata_nv.o
 obj-$(CONFIG_SATA_ULI)         += sata_uli.o
 obj-$(CONFIG_SATA_MV)          += sata_mv.o
+obj-$(CONFIG_SATA_INIC162X)    += sata_inic162x.o
 obj-$(CONFIG_PDC_ADMA)         += pdc_adma.o
 
 obj-$(CONFIG_PATA_ALI)         += pata_ali.o
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
new file mode 100644 (file)
index 0000000..b67817e
--- /dev/null
@@ -0,0 +1,809 @@
+/*
+ * sata_inic162x.c - Driver for Initio 162x SATA controllers
+ *
+ * Copyright 2006  SUSE Linux Products GmbH
+ * Copyright 2006  Tejun Heo <teheo@novell.com>
+ *
+ * This file is released under GPL v2.
+ *
+ * This controller is eccentric and easily locks up if something isn't
+ * right.  Documentation is available at initio's website but it only
+ * documents registers (not programming model).
+ *
+ * - ATA disks work.
+ * - Hotplug works.
+ * - ATAPI read works but burning doesn't.  This thing is really
+ *   peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
+ *   ATAPI DMA WRITE should be programmed.  If you've got a clue, be
+ *   my guest.
+ * - Both STR and STD work.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME       "sata_inic162x"
+#define DRV_VERSION    "0.1"
+
+enum {
+       MMIO_BAR                = 5,
+
+       NR_PORTS                = 2,
+
+       HOST_CTL                = 0x7c,
+       HOST_STAT               = 0x7e,
+       HOST_IRQ_STAT           = 0xbc,
+       HOST_IRQ_MASK           = 0xbe,
+
+       PORT_SIZE               = 0x40,
+
+       /* registers for ATA TF operation */
+       PORT_TF                 = 0x00,
+       PORT_ALT_STAT           = 0x08,
+       PORT_IRQ_STAT           = 0x09,
+       PORT_IRQ_MASK           = 0x0a,
+       PORT_PRD_CTL            = 0x0b,
+       PORT_PRD_ADDR           = 0x0c,
+       PORT_PRD_XFERLEN        = 0x10,
+
+       /* IDMA register */
+       PORT_IDMA_CTL           = 0x14,
+
+       PORT_SCR                = 0x20,
+
+       /* HOST_CTL bits */
+       HCTL_IRQOFF             = (1 << 8),  /* global IRQ off */
+       HCTL_PWRDWN             = (1 << 13), /* power down PHYs */
+       HCTL_SOFTRST            = (1 << 13), /* global reset (no phy reset) */
+       HCTL_RPGSEL             = (1 << 15), /* register page select */
+
+       HCTL_KNOWN_BITS         = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
+                                 HCTL_RPGSEL,
+
+       /* HOST_IRQ_(STAT|MASK) bits */
+       HIRQ_PORT0              = (1 << 0),
+       HIRQ_PORT1              = (1 << 1),
+       HIRQ_SOFT               = (1 << 14),
+       HIRQ_GLOBAL             = (1 << 15), /* STAT only */
+
+       /* PORT_IRQ_(STAT|MASK) bits */
+       PIRQ_OFFLINE            = (1 << 0),  /* device unplugged */
+       PIRQ_ONLINE             = (1 << 1),  /* device plugged */
+       PIRQ_COMPLETE           = (1 << 2),  /* completion interrupt */
+       PIRQ_FATAL              = (1 << 3),  /* fatal error */
+       PIRQ_ATA                = (1 << 4),  /* ATA interrupt */
+       PIRQ_REPLY              = (1 << 5),  /* reply FIFO not empty */
+       PIRQ_PENDING            = (1 << 7),  /* port IRQ pending (STAT only) */
+
+       PIRQ_ERR                = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
+
+       PIRQ_MASK_DMA_READ      = PIRQ_REPLY | PIRQ_ATA,
+       PIRQ_MASK_OTHER         = PIRQ_REPLY | PIRQ_COMPLETE,
+       PIRQ_MASK_FREEZE        = 0xff,
+
+       /* PORT_PRD_CTL bits */
+       PRD_CTL_START           = (1 << 0),
+       PRD_CTL_WR              = (1 << 3),
+       PRD_CTL_DMAEN           = (1 << 7),  /* DMA enable */
+
+       /* PORT_IDMA_CTL bits */
+       IDMA_CTL_RST_ATA        = (1 << 2),  /* hardreset ATA bus */
+       IDMA_CTL_RST_IDMA       = (1 << 5),  /* reset IDMA machinary */
+       IDMA_CTL_GO             = (1 << 7),  /* IDMA mode go */
+       IDMA_CTL_ATA_NIEN       = (1 << 8),  /* ATA IRQ disable */
+};
+
+struct inic_host_priv {
+       u16     cached_hctl;
+};
+
+struct inic_port_priv {
+       u8      dfl_prdctl;
+       u8      cached_prdctl;
+       u8      cached_pirq_mask;
+};
+
+static int inic_slave_config(struct scsi_device *sdev)
+{
+       /* This controller is braindamaged.  dma_boundary is 0xffff
+        * like others but it will lock up the whole machine HARD if
+        * 65536 byte PRD entry is fed.  Reduce maximum segment size.
+        */
+       blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
+
+       return ata_scsi_slave_config(sdev);
+}
+
+static struct scsi_host_template inic_sht = {
+       .module                 = THIS_MODULE,
+       .name                   = DRV_NAME,
+       .ioctl                  = ata_scsi_ioctl,
+       .queuecommand           = ata_scsi_queuecmd,
+       .can_queue              = ATA_DEF_QUEUE,
+       .this_id                = ATA_SHT_THIS_ID,
+       .sg_tablesize           = LIBATA_MAX_PRD,
+       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+       .emulated               = ATA_SHT_EMULATED,
+       .use_clustering         = ATA_SHT_USE_CLUSTERING,
+       .proc_name              = DRV_NAME,
+       .dma_boundary           = ATA_DMA_BOUNDARY,
+       .slave_configure        = inic_slave_config,
+       .slave_destroy          = ata_scsi_slave_destroy,
+       .bios_param             = ata_std_bios_param,
+       .suspend                = ata_scsi_device_suspend,
+       .resume                 = ata_scsi_device_resume,
+};
+
+static const int scr_map[] = {
+       [SCR_STATUS]    = 0,
+       [SCR_ERROR]     = 1,
+       [SCR_CONTROL]   = 2,
+};
+
+static void __iomem * inic_port_base(struct ata_port *ap)
+{
+       return ap->host->mmio_base + ap->port_no * PORT_SIZE;
+}
+
+static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+       void __iomem *port_base = inic_port_base(ap);
+       struct inic_port_priv *pp = ap->private_data;
+
+       writeb(mask, port_base + PORT_IRQ_MASK);
+       pp->cached_pirq_mask = mask;
+}
+
+static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+       struct inic_port_priv *pp = ap->private_data;
+
+       if (pp->cached_pirq_mask != mask)
+               __inic_set_pirq_mask(ap, mask);
+}
+
+static void inic_reset_port(void __iomem *port_base)
+{
+       void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+       u16 ctl;
+
+       ctl = readw(idma_ctl);
+       ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+
+       /* mask IRQ and assert reset */
+       writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+       readw(idma_ctl); /* flush */
+
+       /* give it some time */
+       msleep(1);
+
+       /* release reset */
+       writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+
+       /* clear irq */
+       writeb(0xff, port_base + PORT_IRQ_STAT);
+
+       /* reenable ATA IRQ, turn off IDMA mode */
+       writew(ctl, idma_ctl);
+}
+
+static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+       void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+       void __iomem *addr;
+       u32 val;
+
+       if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+               return 0xffffffffU;
+
+       addr = scr_addr + scr_map[sc_reg] * 4;
+       val = readl(scr_addr + scr_map[sc_reg] * 4);
+
+       /* this controller has stuck DIAG.N, ignore it */
+       if (sc_reg == SCR_ERROR)
+               val &= ~SERR_PHYRDY_CHG;
+       return val;
+}
+
+static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+       void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+       void __iomem *addr;
+
+       if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+               return;
+
+       addr = scr_addr + scr_map[sc_reg] * 4;
+       writel(val, scr_addr + scr_map[sc_reg] * 4);
+}
+
+/*
+ * In TF mode, inic162x is very similar to SFF device.  TF registers
+ * function the same.  DMA engine behaves similary using the same PRD
+ * format as BMDMA but different command register, interrupt and event
+ * notification methods are used.  The following inic_bmdma_*()
+ * functions do the impedance matching.
+ */
+static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+{
+       struct ata_port *ap = qc->ap;
+       struct inic_port_priv *pp = ap->private_data;
+       void __iomem *port_base = inic_port_base(ap);
+       int rw = qc->tf.flags & ATA_TFLAG_WRITE;
+
+       /* make sure device sees PRD table writes */
+       wmb();
+
+       /* load transfer length */
+       writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
+
+       /* turn on DMA and specify data direction */
+       pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
+       if (!rw)
+               pp->cached_prdctl |= PRD_CTL_WR;
+       writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+
+       /* issue r/w command */
+       ap->ops->exec_command(ap, &qc->tf);
+}
+
+static void inic_bmdma_start(struct ata_queued_cmd *qc)
+{
+       struct ata_port *ap = qc->ap;
+       struct inic_port_priv *pp = ap->private_data;
+       void __iomem *port_base = inic_port_base(ap);
+
+       /* start host DMA transaction */
+       pp->cached_prdctl |= PRD_CTL_START;
+       writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static void inic_bmdma_stop(struct ata_queued_cmd *qc)
+{
+       struct ata_port *ap = qc->ap;
+       struct inic_port_priv *pp = ap->private_data;
+       void __iomem *port_base = inic_port_base(ap);
+
+       /* stop DMA engine */
+       writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static u8 inic_bmdma_status(struct ata_port *ap)
+{
+       /* event is already verified by the interrupt handler */
+       return ATA_DMA_INTR;
+}
+
+static void inic_irq_clear(struct ata_port *ap)
+{
+       /* noop */
+}
+
+static void inic_host_intr(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+       struct ata_eh_info *ehi = &ap->eh_info;
+       u8 irq_stat;
+
+       /* fetch and clear irq */
+       irq_stat = readb(port_base + PORT_IRQ_STAT);
+       writeb(irq_stat, port_base + PORT_IRQ_STAT);
+
+       if (likely(!(irq_stat & PIRQ_ERR))) {
+               struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+
+               if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+                       ata_chk_status(ap);     /* clear ATA interrupt */
+                       return;
+               }
+
+               if (likely(ata_host_intr(ap, qc)))
+                       return;
+
+               ata_chk_status(ap);     /* clear ATA interrupt */
+               ata_port_printk(ap, KERN_WARNING, "unhandled "
+                               "interrupt, irq_stat=%x\n", irq_stat);
+               return;
+       }
+
+       /* error */
+       ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
+
+       if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+               ata_ehi_hotplugged(ehi);
+               ata_port_freeze(ap);
+       } else
+               ata_port_abort(ap);
+}
+
+static irqreturn_t inic_interrupt(int irq, void *dev_instance)
+{
+       struct ata_host *host = dev_instance;
+       void __iomem *mmio_base = host->mmio_base;
+       u16 host_irq_stat;
+       int i, handled = 0;;
+
+       host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+
+       if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
+               goto out;
+
+       spin_lock(&host->lock);
+
+       for (i = 0; i < NR_PORTS; i++) {
+               struct ata_port *ap = host->ports[i];
+
+               if (!(host_irq_stat & (HIRQ_PORT0 << i)))
+                       continue;
+
+               if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
+                       inic_host_intr(ap);
+                       handled++;
+               } else {
+                       if (ata_ratelimit())
+                               dev_printk(KERN_ERR, host->dev, "interrupt "
+                                          "from disabled port %d (0x%x)\n",
+                                          i, host_irq_stat);
+               }
+       }
+
+       spin_unlock(&host->lock);
+
+ out:
+       return IRQ_RETVAL(handled);
+}
+
+static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
+{
+       struct ata_port *ap = qc->ap;
+
+       /* ATA IRQ doesn't wait for DMA transfer completion and vice
+        * versa.  Mask IRQ selectively to detect command completion.
+        * Without it, ATA DMA read command can cause data corruption.
+        *
+        * Something similar might be needed for ATAPI writes.  I
+        * tried a lot of combinations but couldn't find the solution.
+        */
+       if (qc->tf.protocol == ATA_PROT_DMA &&
+           !(qc->tf.flags & ATA_TFLAG_WRITE))
+               inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
+       else
+               inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+       /* Issuing a command to yet uninitialized port locks up the
+        * controller.  Most of the time, this happens for the first
+        * command after reset which are ATA and ATAPI IDENTIFYs.
+        * Fast fail if stat is 0x7f or 0xff for those commands.
+        */
+       if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
+                    qc->tf.command == ATA_CMD_ID_ATAPI)) {
+               u8 stat = ata_chk_status(ap);
+               if (stat == 0x7f || stat == 0xff)
+                       return AC_ERR_HSM;
+       }
+
+       return ata_qc_issue_prot(qc);
+}
+
+static void inic_freeze(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+
+       __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
+
+       ata_chk_status(ap);
+       writeb(0xff, port_base + PORT_IRQ_STAT);
+
+       readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+static void inic_thaw(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+
+       ata_chk_status(ap);
+       writeb(0xff, port_base + PORT_IRQ_STAT);
+
+       __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+       readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+/*
+ * SRST and SControl hardreset don't give valid signature on this
+ * controller.  Only controller specific hardreset mechanism works.
+ */
+static int inic_hardreset(struct ata_port *ap, unsigned int *class)
+{
+       void __iomem *port_base = inic_port_base(ap);
+       void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+       const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+       u16 val;
+       int rc;
+
+       /* hammer it into sane state */
+       inic_reset_port(port_base);
+
+       if (ata_port_offline(ap)) {
+               *class = ATA_DEV_NONE;
+               return 0;
+       }
+
+       val = readw(idma_ctl);
+       writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+       readw(idma_ctl);        /* flush */
+       msleep(1);
+       writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+
+       rc = sata_phy_resume(ap, timing);
+       if (rc) {
+               ata_port_printk(ap, KERN_WARNING, "failed to resume "
+                               "link for reset (errno=%d)\n", rc);
+               return rc;
+       }
+
+       msleep(150);
+
+       *class = ATA_DEV_NONE;
+       if (ata_port_online(ap)) {
+               struct ata_taskfile tf;
+
+               if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+                       ata_port_printk(ap, KERN_WARNING,
+                                       "device busy after hardreset\n");
+                       return -EIO;
+               }
+
+               ata_tf_read(ap, &tf);
+               *class = ata_dev_classify(&tf);
+               if (*class == ATA_DEV_UNKNOWN)
+                       *class = ATA_DEV_NONE;
+       }
+
+       return 0;
+}
+
+static void inic_error_handler(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+       struct inic_port_priv *pp = ap->private_data;
+       unsigned long flags;
+
+       /* reset PIO HSM and stop DMA engine */
+       inic_reset_port(port_base);
+
+       spin_lock_irqsave(ap->lock, flags);
+       ap->hsm_task_state = HSM_ST_IDLE;
+       writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+       spin_unlock_irqrestore(ap->lock, flags);
+
+       /* PIO and DMA engines have been stopped, perform recovery */
+       ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
+                 ata_std_postreset);
+}
+
+static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+       /* make DMA engine forget about the failed command */
+       if (qc->err_mask)
+               inic_reset_port(inic_port_base(qc->ap));
+}
+
+static void inic_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+       /* inic can only handle upto LBA28 max sectors */
+       if (dev->max_sectors > ATA_MAX_SECTORS)
+               dev->max_sectors = ATA_MAX_SECTORS;
+}
+
+static void init_port(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+
+       /* Setup PRD address */
+       writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+}
+
+static int inic_port_resume(struct ata_port *ap)
+{
+       init_port(ap);
+       return 0;
+}
+
+static int inic_port_start(struct ata_port *ap)
+{
+       void __iomem *port_base = inic_port_base(ap);
+       struct inic_port_priv *pp;
+       u8 tmp;
+       int rc;
+
+       /* alloc and initialize private data */
+       pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+       if (!pp)
+               return -ENOMEM;
+       ap->private_data = pp;
+
+       /* default PRD_CTL value, DMAEN, WR and START off */
+       tmp = readb(port_base + PORT_PRD_CTL);
+       tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
+       pp->dfl_prdctl = tmp;
+
+       /* Alloc resources */
+       rc = ata_port_start(ap);
+       if (rc) {
+               kfree(pp);
+               return rc;
+       }
+
+       init_port(ap);
+
+       return 0;
+}
+
+static void inic_port_stop(struct ata_port *ap)
+{
+       ata_port_stop(ap);
+       kfree(ap->private_data);
+}
+
+static struct ata_port_operations inic_port_ops = {
+       .port_disable           = ata_port_disable,
+       .tf_load                = ata_tf_load,
+       .tf_read                = ata_tf_read,
+       .check_status           = ata_check_status,
+       .exec_command           = ata_exec_command,
+       .dev_select             = ata_std_dev_select,
+
+       .scr_read               = inic_scr_read,
+       .scr_write              = inic_scr_write,
+
+       .bmdma_setup            = inic_bmdma_setup,
+       .bmdma_start            = inic_bmdma_start,
+       .bmdma_stop             = inic_bmdma_stop,
+       .bmdma_status           = inic_bmdma_status,
+
+       .irq_handler            = inic_interrupt,
+       .irq_clear              = inic_irq_clear,
+
+       .qc_prep                = ata_qc_prep,
+       .qc_issue               = inic_qc_issue,
+       .data_xfer              = ata_pio_data_xfer,
+
+       .freeze                 = inic_freeze,
+       .thaw                   = inic_thaw,
+       .error_handler          = inic_error_handler,
+       .post_internal_cmd      = inic_post_internal_cmd,
+       .dev_config             = inic_dev_config,
+
+       .port_resume            = inic_port_resume,
+
+       .port_start             = inic_port_start,
+       .port_stop              = inic_port_stop,
+       .host_stop              = ata_pci_host_stop
+};
+
+static struct ata_port_info inic_port_info = {
+       .sht                    = &inic_sht,
+       /* For some reason, ATA_PROT_ATAPI is broken on this
+        * controller, and no, PIO_POLLING does't fix it.  It somehow
+        * manages to report the wrong ireason and ignoring ireason
+        * results in machine lock up.  Tell libata to always prefer
+        * DMA.
+        */
+       .flags                  = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
+       .pio_mask               = 0x1f, /* pio0-4 */
+       .mwdma_mask             = 0x07, /* mwdma0-2 */
+       .udma_mask              = 0x7f, /* udma0-6 */
+       .port_ops               = &inic_port_ops
+};
+
+static int init_controller(void __iomem *mmio_base, u16 hctl)
+{
+       int i;
+       u16 val;
+
+       hctl &= ~HCTL_KNOWN_BITS;
+
+       /* Soft reset whole controller.  Spec says reset duration is 3
+        * PCI clocks, be generous and give it 10ms.
+        */
+       writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
+       readw(mmio_base + HOST_CTL); /* flush */
+
+       for (i = 0; i < 10; i++) {
+               msleep(1);
+               val = readw(mmio_base + HOST_CTL);
+               if (!(val & HCTL_SOFTRST))
+                       break;
+       }
+
+       if (val & HCTL_SOFTRST)
+               return -EIO;
+
+       /* mask all interrupts and reset ports */
+       for (i = 0; i < NR_PORTS; i++) {
+               void __iomem *port_base = mmio_base + i * PORT_SIZE;
+
+               writeb(0xff, port_base + PORT_IRQ_MASK);
+               inic_reset_port(port_base);
+       }
+
+       /* port IRQ is masked now, unmask global IRQ */
+       writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
+       val = readw(mmio_base + HOST_IRQ_MASK);
+       val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
+       writew(val, mmio_base + HOST_IRQ_MASK);
+
+       return 0;
+}
+
+static int inic_pci_device_resume(struct pci_dev *pdev)
+{
+       struct ata_host *host = dev_get_drvdata(&pdev->dev);
+       struct inic_host_priv *hpriv = host->private_data;
+       void __iomem *mmio_base = host->mmio_base;
+       int rc;
+
+       ata_pci_device_do_resume(pdev);
+
+       if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+               printk("XXX\n");
+               rc = init_controller(mmio_base, hpriv->cached_hctl);
+               if (rc)
+                       return rc;
+       }
+
+       ata_host_resume(host);
+
+       return 0;
+}
+
+static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+       static int printed_version;
+       struct ata_port_info *pinfo = &inic_port_info;
+       struct ata_probe_ent *probe_ent;
+       struct inic_host_priv *hpriv;
+       void __iomem *mmio_base;
+       int i, rc;
+
+       if (!printed_version++)
+               dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+       rc = pci_enable_device(pdev);
+       if (rc)
+               return rc;
+
+       rc = pci_request_regions(pdev, DRV_NAME);
+       if (rc)
+               goto err_out;
+
+       rc = -ENOMEM;
+       mmio_base = pci_iomap(pdev, MMIO_BAR, 0);
+       if (!mmio_base)
+               goto err_out_regions;
+
+       /* Set dma_mask.  This devices doesn't support 64bit addressing. */
+       rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+       if (rc) {
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "32-bit DMA enable failed\n");
+               goto err_out_map;
+       }
+
+       rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+       if (rc) {
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "32-bit consistent DMA enable failed\n");
+               goto err_out_map;
+       }
+
+       rc = -ENOMEM;
+       probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+       if (!probe_ent)
+               goto err_out_map;
+
+       hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+       if (!hpriv)
+               goto err_out_ent;
+
+       probe_ent->dev = &pdev->dev;
+       INIT_LIST_HEAD(&probe_ent->node);
+
+       probe_ent->sht                  = pinfo->sht;
+       probe_ent->port_flags           = pinfo->flags;
+       probe_ent->pio_mask             = pinfo->pio_mask;
+       probe_ent->mwdma_mask           = pinfo->mwdma_mask;
+       probe_ent->udma_mask            = pinfo->udma_mask;
+       probe_ent->port_ops             = pinfo->port_ops;
+       probe_ent->n_ports              = NR_PORTS;
+
+       probe_ent->irq = pdev->irq;
+       probe_ent->irq_flags = SA_SHIRQ;
+
+       probe_ent->mmio_base = mmio_base;
+
+       for (i = 0; i < NR_PORTS; i++) {
+               struct ata_ioports *port = &probe_ent->port[i];
+               unsigned long port_base =
+                       (unsigned long)mmio_base + i * PORT_SIZE;
+
+               port->cmd_addr = pci_resource_start(pdev, 2 * i);
+               port->altstatus_addr =
+               port->ctl_addr =
+                       pci_resource_start(pdev, 2 * i + 1) | ATA_PCI_CTL_OFS;
+               port->scr_addr = port_base + PORT_SCR;
+
+               ata_std_ports(port);
+       }
+
+       probe_ent->private_data = hpriv;
+       hpriv->cached_hctl = readw(mmio_base + HOST_CTL);
+
+       rc = init_controller(mmio_base, hpriv->cached_hctl);
+       if (rc) {
+               dev_printk(KERN_ERR, &pdev->dev,
+                          "failed to initialize controller\n");
+               goto err_out_hpriv;
+       }
+
+       pci_set_master(pdev);
+
+       rc = -ENODEV;
+       if (!ata_device_add(probe_ent))
+               goto err_out_hpriv;
+
+       kfree(probe_ent);
+
+       return 0;
+
+ err_out_hpriv:
+       kfree(hpriv);
+ err_out_ent:
+       kfree(probe_ent);
+ err_out_map:
+       pci_iounmap(pdev, mmio_base);
+ err_out_regions:
+       pci_release_regions(pdev);
+ err_out:
+       pci_disable_device(pdev);
+       return rc;
+}
+
+static const struct pci_device_id inic_pci_tbl[] = {
+       { PCI_VDEVICE(INIT, 0x1622), },
+       { },
+};
+
+static struct pci_driver inic_pci_driver = {
+       .name           = DRV_NAME,
+       .id_table       = inic_pci_tbl,
+       .suspend        = ata_pci_device_suspend,
+       .resume         = inic_pci_device_resume,
+       .probe          = inic_init_one,
+       .remove         = ata_pci_remove_one,
+};
+
+static int __init inic_init(void)
+{
+       return pci_register_driver(&inic_pci_driver);
+}
+
+static void __exit inic_exit(void)
+{
+       pci_unregister_driver(&inic_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(inic_init);
+module_exit(inic_exit);