/* Operation mode value */
#define HT_OPMODE_NO_PROTECT 0
#define HT_OPMODE_OPTIONAL 1
-#define HT_OPMODE_40MHZ_PROTECT 2
+#define HT_OPMODE_40MHZ_PROTECT 2
#define HT_OPMODE_MIXED 3
/* MIMO Power Save Settings */
-#define MIMO_PS_STATIC 0
+#define MIMO_PS_STATIC 0
#define MIMO_PS_DYNAMIC 1
#define MIMO_PS_NOLIMIT 3
/* There should be 128 bits to cover all of the MCS rates. However, since
* 8190 does not support too much rates, one integer is quite enough. */
-#define sHTCLng 4
+#define sHTCLng 4
-#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff
-#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00
-#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
+#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff
+#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00
+#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
typedef enum _HT_MCS_RATE {
HT_MCS7 = 0x00000080,
HT_MCS8 = 0x00000100,
HT_MCS9 = 0x00000200,
- HT_MCS10 = 0x00000400,
- HT_MCS11 = 0x00000800,
- HT_MCS12 = 0x00001000,
- HT_MCS13 = 0x00002000,
- HT_MCS14 = 0x00004000,
- HT_MCS15 = 0x00008000,
+ HT_MCS10 = 0x00000400,
+ HT_MCS11 = 0x00000800,
+ HT_MCS12 = 0x00001000,
+ HT_MCS13 = 0x00002000,
+ HT_MCS14 = 0x00004000,
+ HT_MCS15 = 0x00008000,
/* Do not define MCS32 here although 8190 support MCS32 */
} HT_MCS_RATE,*PHT_MCS_RATE;
/* Represent Channel Width in HT Capabilities */
typedef enum _HT_CHANNEL_WIDTH {
- HT_CHANNEL_WIDTH_20 = 0,
+ HT_CHANNEL_WIDTH_20 = 0,
HT_CHANNEL_WIDTH_20_40 = 1,
} HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
* This is available only in 40Mhz mode. */
typedef enum _HT_EXTCHNL_OFFSET {
HT_EXTCHNL_OFFSET_NO_EXT = 0,
- HT_EXTCHNL_OFFSET_UPPER = 1,
+ HT_EXTCHNL_OFFSET_UPPER = 1,
HT_EXTCHNL_OFFSET_NO_DEF = 2,
- HT_EXTCHNL_OFFSET_LOWER = 3,
+ HT_EXTCHNL_OFFSET_LOWER = 3,
} HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
typedef enum _CHNLOP {
- CHNLOP_NONE = 0, /* No Action now */
- CHNLOP_SCAN = 1, /* Scan in progress */
- CHNLOP_SWBW = 2, /* Bandwidth switching in progress */
+ CHNLOP_NONE = 0, /* No Action now */
+ CHNLOP_SCAN = 1, /* Scan in progress */
+ CHNLOP_SWBW = 2, /* Bandwidth switching in progress */
CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */
} CHNLOP, *PCHNLOP;
typedef enum _HT_ACTION {
ACT_RECOMMAND_WIDTH = 0,
ACT_MIMO_PWR_SAVE = 1,
- ACT_PSMP = 2,
+ ACT_PSMP = 2,
ACT_SET_PCO_PHASE = 3,
- ACT_MIMO_CHL_MEASURE = 4,
- ACT_RECIPROCITY_CORRECT = 5,
+ ACT_MIMO_CHL_MEASURE = 4,
+ ACT_RECIPROCITY_CORRECT = 5,
ACT_MIMO_CSI_MATRICS = 6,
- ACT_MIMO_NOCOMPR_STEER = 7,
+ ACT_MIMO_NOCOMPR_STEER = 7,
ACT_MIMO_COMPR_STEER = 8,
ACT_ANTENNA_SELECT = 9,
} HT_ACTION, *PHT_ACTION;
/* Define sub-carrier mode for 40MHZ. */
typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
SC_MODE_DUPLICATE = 0,
- SC_MODE_LOWER = 1,
- SC_MODE_UPPER = 2,
+ SC_MODE_LOWER = 1,
+ SC_MODE_UPPER = 2,
SC_MODE_FULL40MHZ = 3,
} HT_BW40_SC_E;
*----------------------------------------------------------------------------*/
typedef struct _RT_HIGH_THROUGHPUT {
- u8 bEnableHT;
- u8 bCurrentHTSupport;
+ u8 bEnableHT;
+ u8 bCurrentHTSupport;
/* Tx 40MHz channel capability */
- u8 bRegBW40MHz;
- u8 bCurBW40MHz;
+ u8 bRegBW40MHz;
+ u8 bCurBW40MHz;
/* Tx Short GI for 40Mhz */
- u8 bRegShortGI40MHz;
- u8 bCurShortGI40MHz;
+ u8 bRegShortGI40MHz;
+ u8 bCurShortGI40MHz;
/* Tx Short GI for 20MHz */
- u8 bRegShortGI20MHz;
- u8 bCurShortGI20MHz;
+ u8 bRegShortGI20MHz;
+ u8 bCurShortGI20MHz;
/* Tx CCK rate capability */
- u8 bRegSuppCCK;
- u8 bCurSuppCCK;
+ u8 bRegSuppCCK;
+ u8 bCurSuppCCK;
/* 802.11n spec version for "peer" */
- HT_SPEC_VER ePeerHTSpecVer;
+ HT_SPEC_VER ePeerHTSpecVer;
/* HT related information for "Self" */
HT_INFORMATION_ELE SelfHTInfo;
/* HT related information for "Peer" */
- u8 PeerHTCapBuf[32];
- u8 PeerHTInfoBuf[32];
+ u8 PeerHTCapBuf[32];
+ u8 PeerHTInfoBuf[32];
/* A-MSDU related */
/* This indicates Tx A-MSDU capability */
- u8 bAMSDU_Support;
- u16 nAMSDU_MaxSize;
- u8 bCurrent_AMSDU_Support;
- u16 nCurrent_AMSDU_MaxSize;
+ u8 bAMSDU_Support;
+ u16 nAMSDU_MaxSize;
+ u8 bCurrent_AMSDU_Support;
+ u16 nCurrent_AMSDU_MaxSize;
/* A-MPDU related */
/* This indicate Tx A-MPDU capability */
- u8 bAMPDUEnable;
- u8 bCurrentAMPDUEnable;
- u8 AMPDU_Factor;
- u8 CurrentAMPDUFactor;
- u8 MPDU_Density;
- u8 CurrentMPDUDensity;
+ u8 bAMPDUEnable;
+ u8 bCurrentAMPDUEnable;
+ u8 AMPDU_Factor;
+ u8 CurrentAMPDUFactor;
+ u8 MPDU_Density;
+ u8 CurrentMPDUDensity;
/* Forced A-MPDU enable */
- HT_AGGRE_MODE_E ForcedAMPDUMode;
- u8 ForcedAMPDUFactor;
- u8 ForcedMPDUDensity;
+ HT_AGGRE_MODE_E ForcedAMPDUMode;
+ u8 ForcedAMPDUFactor;
+ u8 ForcedMPDUDensity;
/* Forced A-MSDU enable */
- HT_AGGRE_MODE_E ForcedAMSDUMode;
- u16 ForcedAMSDUMaxSize;
+ HT_AGGRE_MODE_E ForcedAMSDUMode;
+ u16 ForcedAMSDUMaxSize;
- u8 bForcedShortGI;
+ u8 bForcedShortGI;
- u8 CurrentOpMode;
+ u8 CurrentOpMode;
/* MIMO PS related */
- u8 SelfMimoPs;
- u8 PeerMimoPs;
+ u8 SelfMimoPs;
+ u8 PeerMimoPs;
/* 40MHz Channel Offset settings. */
HT_EXTCHNL_OFFSET CurSTAExtChnlOffset;
- u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */
- u8 PeerBandwidth;
+ u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */
+ u8 PeerBandwidth;
/* For Bandwidth Switching */
- u8 bSwBwInProgress;
- CHNLOP ChnlOp; /* software switching channel in progress. */
- u8 SwBwStep;
- struct timer_list SwBwTimer;
+ u8 bSwBwInProgress;
+ CHNLOP ChnlOp; /* software switching channel in progress. */
+ u8 SwBwStep;
+ struct timer_list SwBwTimer;
/* For Realtek proprietary A-MPDU factor for aggregation */
- u8 bRegRT2RTAggregation;
- u8 bCurrentRT2RTAggregation;
- u8 bCurrentRT2RTLongSlotTime;
- u8 szRT2RTAggBuffer[10];
+ u8 bRegRT2RTAggregation;
+ u8 bCurrentRT2RTAggregation;
+ u8 bCurrentRT2RTLongSlotTime;
+ u8 szRT2RTAggBuffer[10];
/* Rx Reorder control */
- u8 bRegRxReorderEnable;
- u8 bCurRxReorderEnable;
- u8 RxReorderWinSize;
- u8 RxReorderPendingTime;
- u16 RxReorderDropCounter;
+ u8 bRegRxReorderEnable;
+ u8 bCurRxReorderEnable;
+ u8 RxReorderWinSize;
+ u8 RxReorderPendingTime;
+ u16 RxReorderDropCounter;
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
- u8 UsbTxAggrNum;
+ u8 UsbTxAggrNum;
#endif
#ifdef USB_RX_AGGREGATION_SUPPORT
- u8 UsbRxFwAggrEn;
- u8 UsbRxFwAggrPageNum;
- u8 UsbRxFwAggrPacketNum;
- u8 UsbRxFwAggrTimeout;
+ u8 UsbRxFwAggrEn;
+ u8 UsbRxFwAggrPageNum;
+ u8 UsbRxFwAggrPacketNum;
+ u8 UsbRxFwAggrTimeout;
#endif
/* Add for Broadcom(Linksys) IOT. */
- u8 bIsPeerBcm;
+ u8 bIsPeerBcm;
/* For IOT issue. */
- u32 IOTAction;
+ u32 IOTAction;
} RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
u8 bdSupportHT;
/* HT related elements */
- u8 bdHTCapBuf[32];
- u16 bdHTCapLen;
- u8 bdHTInfoBuf[32];
- u16 bdHTInfoLen;
+ u8 bdHTCapBuf[32];
+ u16 bdHTCapLen;
+ u8 bdHTInfoBuf[32];
+ u16 bdHTInfoLen;
- HT_SPEC_VER bdHTSpecVer;
+ HT_SPEC_VER bdHTSpecVer;
- u8 bdRT2RTAggregation;
- u8 bdRT2RTLongSlotTime;
+ u8 bdRT2RTAggregation;
+ u8 bdRT2RTLongSlotTime;
} BSS_HT, *PBSS_HT;
typedef struct _MIMO_RSSI {
typedef struct _MIMO_EVM {
u32 EVM1;
- u32 EVM2;
+ u32 EVM2;
} MIMO_EVM, *PMIMO_EVM;
typedef struct _FALSE_ALARM_STATISTICS {
u32 Cnt_Parity_Fail;
- u32 Cnt_Rate_Illegal;
+ u32 Cnt_Rate_Illegal;
u32 Cnt_Crc8_fail;
u32 Cnt_all;
} FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff